Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1237.

merc84

hero member

Activity: 799

Merit: 1000

Quote from: Tmdz on July 08, 2016, 10:32:25 PM

I did the calculation and its very profitable right now.

10 min blocks and readjust every 1000 blocks so readjust every 7 days or so but that will much less due to all the new hash.

Difficulty = 3925 TH

Block reward = 240'000 coins

Miner hash example = 1 GH

(insert math) 5283 Sia Coins per day or roughly $3.69 per day..$110 month (that will actually be more due to blocks getting solved fast on pool)

Only 686 blocks to go until readjustment so enjoy this profit until then.

(Apply ghetto math) seems it would be more profitable to just mine sia coin directly.

Tmdz

hero member

Activity: 1008

Merit: 1000

I did the calculation and its very profitable right now.

10 min blocks and readjust every 1000 blocks so readjust every 7 days or so but that will much less due to all the new hash.

Difficulty = 3925 TH

Block reward = 240'000 coins

Miner hash example = 1 GH

(insert math) 5283 Sia Coins per day or roughly $3.69 per day..$110 month (that will actually be more due to blocks getting solved fast on pool)

Only 686 blocks to go until readjustment so enjoy this profit until then.

Talan

newbie

Activity: 16

Merit: 0

Hi Claymore,

Is it possible to enable SIA+DCR mining? ETH mining will be dead anyways soon.
I'm okay to pay my devfee with ETH, but SIA+DCR at the same time would be great!

Marvell1

legendary

Activity: 2408

Merit: 1102

Leading Crypto Sports Betting & Casino Platform

Quote from: ?? on ??

Sia or DCR is profitable to dual mine? Any one did a calculation?

DCR is quite profitable i dont know of any calculators for sia

BitJunkie223

member

Activity: 88

Merit: 10

Vertcoin stealthy master race.

Quote from: molitar on July 08, 2016, 08:49:22 PM

What are you seeing for sia hashing for a 280x or 380x? Haven't seen anyone post what they are doing in Sia.

I'd kinda like to know as well. And does anyone know of a siacoin calculator that automatically tracks difficulty and such? I'd have no idea how much I'd be getting, is the main problem...

As a matter of fact, is Decred even worth dual mining anymore, now that we can dual mine Eth/Sia?

molitar

sr. member

Activity: 322

Merit: 250

What are you seeing for sia hashing for a 280x or 380x? Haven't seen anyone post what they are doing in Sia.

merc84

hero member

Activity: 799

Merit: 1000

I see this often when mining Exp on dwarfpool:
ETH:: No new jobs were received for 5 mins - something wrong with the pool, disconnect.

I browsed Op but couldn't find flag to adjust this value (apologies if i missed it). Is there some flag to adjust this value if not can it be added in future release, thanks!

ps_jb

hero member

Activity: 742

Merit: 500

Quote from: adaseb on July 08, 2016, 07:45:52 PM

Here are the power consumption increases with ETH only and ETH+SC

One rig uses 925Watts with ETH only and with ETH+SC uses 1100Watts.

Another rig uses 525Watts with ETH only and with ETH+SC uses 620Watts.

Any profit from that SC - or just for lulz?

merc84

hero member

Activity: 799

Merit: 1000

Quote from: adaseb on July 08, 2016, 07:45:52 PM

Here are the power consumption increases with ETH only and ETH+SC

One rig uses 925Watts with ETH only and with ETH+SC uses 1100Watts.

Another rig uses 525Watts with ETH only and with ETH+SC uses 620Watts.

So exactly a +18% power increase.

Anyway to decrease ETH intensity while its mining? Basically want to reduce ETH speed so it uses the same power as before from the wall.

Yes its in the op.

-ethi Ethereum intensity. Default value is 8, you can decrease this value if you don't want Windows to freeze or if you have problems with stability. The most low GPU load is "-ethi 0".
Also "-ethi" now can set intensity for every card individually, for example "-ethi 1,8,6".
You can also specify negative values, for example, "-ethi -8192", it exactly means "global work size" parameter which is used in official miner.

adaseb

legendary

Activity: 3808

Merit: 1723

Here are the power consumption increases with ETH only and ETH+SC

One rig uses 925Watts with ETH only and with ETH+SC uses 1100Watts.

Another rig uses 525Watts with ETH only and with ETH+SC uses 620Watts.

So exactly a +18% power increase.

Anyway to decrease ETH intensity while its mining? Basically want to reduce ETH speed so it uses the same power as before from the wall.

l8nit3

legendary

Activity: 1007

Merit: 1000

Has anyone else had an issue with temp showing 0 on a windforce r9 280x? I just switched from my 270x (which displayed fine on all version of this miner), and when I booted up, it shows no temp, although hashing speed seems right. I have tried multiple versions of the miner and have the same problem so i assume its something with my setup (nothing has changed since using the 270x). At the same time, it seems my mclock and cclock settings are not recognized.. no matter what i set it to, i still get 18.19 Mhs.

my troubleshooting:
After switching my 270x to my 280x, I used DDU to uninstall all drivers, rebooted, and re-installed 15.12 ... hoping that it was a driver issue (not fully installed, etc.) I have also tried without mclock and cclock, and still show no temp, and still 18.19 mhs.

My setup:
-MSI h87-g41 Mboard
-pentium g3220 cpu
-12 gb ram
-250 gb ssd
-1 r9 280x windforce
-amd 15.12 catalyst
- all required 'setx' options have been set

Anybody got any ideas what the issue might be?

fittsy

sr. member

Activity: 441

Merit: 252

Quote from: densets on July 08, 2016, 07:18:10 PM

only works if i dont specify a worker name for sia
http://sia-eu1.nanopool.org:9980/miner/header?address=YourSiaAddress
instead of

http://sia-eu1.nanopool.org:9980/miner/header?address=YourSiaAddress&worker=YourWorkerName

Is there a way arround this? tried "" but nothing.

It won't show until that miner submits a share. Did you wait long enough to submit a share?

fittsy

sr. member

Activity: 441

Merit: 252

Quote from: densets on July 08, 2016, 07:18:10 PM

only works if i dont specify a worker name for sia
http://sia-eu1.nanopool.org:9980/miner/header?address=YourSiaAddress
instead of

http://sia-eu1.nanopool.org:9980/miner/header?address=YourSiaAddress&worker=YourWorkerName

Is there a way arround this? tried "" but nothing.

What is your workername?

vapourminer

legendary

Activity: 4354

Merit: 3614

what is this "brake pedal" you speak of?

Quote from: densets on July 08, 2016, 07:18:10 PM

only works if i dont specify a worker name for sia
http://sia-eu1.nanopool.org:9980/miner/header?address=YourSiaAddress
instead of

http://sia-eu1.nanopool.org:9980/miner/header?address=YourSiaAddress&worker=YourWorkerName

Is there a way arround this? tried "" but nothing.

i set it in config.txt. here is my line:

Code:

-dpool http://sia-us-east1.nanopool.org:9980/miner/header?address=0...7&worker=UpperRig

vapourminer

legendary

Activity: 4354

Merit: 3614

what is this "brake pedal" you speak of?

@claymore

in the remote manager in 5.0 the dropdown for "second coin name" only has "Decred" as an option.

remote manager is at 1.4.. no changes from 4.7 release? cant remember what it was at before.

densets

newbie

Activity: 36

Merit: 0

only works if i dont specify a worker name for sia
http://sia-eu1.nanopool.org:9980/miner/header?address=YourSiaAddress
instead of

http://sia-eu1.nanopool.org:9980/miner/header?address=YourSiaAddress&worker=YourWorkerName

Is there a way arround this? tried "" but nothing.

fittsy

sr. member

Activity: 441

Merit: 252

Quote from: adaseb on July 08, 2016, 05:03:08 PM

There are no balances shown because the pool hasn't found a block yet most likely.

My stats page now shows an unconfirmed balance at the top of the page.

Approximated earnings at the bottom is still blank.

vapourminer

legendary

Activity: 4354

Merit: 3614

what is this "brake pedal" you speak of?

Quote from: adaseb on July 08, 2016, 05:44:25 PM

My rigs seems to be slower by only 0.5%

with sia and eth, bout the same here, definitely less than 1%.. 0.5% or so is probably closer but Im hitting the margin of error on figures this low.

r9 390, win7 x64 pro on 16.2.1 drivers.

merc84

hero member

Activity: 799

Merit: 1000

Much rejoicing, after update to V5 i no longer have issue with error 4 when building dag on my 7950 rig!

adaseb

legendary

Activity: 3808

Merit: 1723

Quote from: pikachuy on July 08, 2016, 05:54:21 PM

Quote from: adaseb on July 08, 2016, 05:39:45 PM

Seems its a ratio of 15x for SC speed.

If your ETH miner is 20MH/s then your SC will be 300MH/s

Im surprised how the dual mining SC doesn't slow down ETH mining speed at all.

Do you happen to know about power draw / heat increases with eth+sia compared to just eth mining only?

Will measure the power and get back to you.

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1237. (Read 6590757 times)