Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1234.

fittsy

sr. member

Activity: 441

Merit: 252

Quote from: o00o on July 09, 2016, 08:37:43 PM

Has anyone been able to conclude whether it remains more profitable to mine ETH+DCR vs that of ETH+SIA on 290/390s?

For me, DCR wasn't profitable. SIA is.

I may end up paying for it in extra power consumption though Sad

osnwt

sr. member

Activity: 353

Merit: 251

Quote from: fr4nkthetank on July 10, 2016, 12:13:03 AM

find the appropriate -xx string to put in your .bat file. I forgot what it was. I suggest everyone turn off their log files unless you have problems.

Anybody reads what's written in the question?

First, it is Linux, there's no .bat file.
Second, it's not a miner log, it's system log, Linux kernel messages.

I think only Claymore can give any answers. But it might be the result of using amdgpu-pro drivers and newest cards. AMD drivers are not the best written software as was mentioned few times.

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: fr4nkthetank on July 10, 2016, 12:13:03 AM

Quote from: GandalfG on July 09, 2016, 08:17:56 PM

Mining with Claymore and get full HDD (128GB SSD) in half hour.
After checking find /var/log/syslog and kern.log grown up to 52GB each.
System write this 4 messages about 4-5 thousands per second !

Code:

Jul 9 23:58:37 test-rig kernel: [ 1399.017519] VM fault (0x01, vmid 6) at page 135290427, read from 'TC3' (0x54433300) (196)
Jul 9 23:58:37 test-rig kernel: [ 1399.017554] amdgpu 0000:04:00.0: GPU fault detected: 147 0x01c84801
Jul 9 23:58:37 test-rig kernel: [ 1399.017557] amdgpu 0000:04:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x08105E39
Jul 9 23:58:37 test-rig kernel: [ 1399.017559] amdgpu 0000:04:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C048001

Jul 9 23:58:37 test-rig kernel: [ 1399.017561] VM fault (0x01, vmid 6) at page 135290425, read from 'TC4' (0x54433400) (72)
Jul 9 23:58:37 test-rig kernel: [ 1399.017567] amdgpu 0000:01:00.0: GPU fault detected: 147 0x01f08801
Jul 9 23:58:37 test-rig kernel: [ 1399.017569] amdgpu 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x08105E3E
Jul 9 23:58:37 test-rig kernel: [ 1399.017570] amdgpu 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C088001

Jul 9 23:58:37 test-rig kernel: [ 1399.017572] VM fault (0x01, vmid 6) at page 135290430, read from 'TC6' (0x54433600) (136)
Jul 9 23:58:37 test-rig kernel: [ 1399.017607] amdgpu 0000:04:00.0: GPU fault detected: 147 0x01e84801
Jul 9 23:58:37 test-rig kernel: [ 1399.017610] amdgpu 0000:04:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x08105E3D
Jul 9 23:58:37 test-rig kernel: [ 1399.017612] amdgpu 0000:04:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C048001

Despite this mine worked properly 24.3 MH/s on each card until the disk is full

Someone also stumbled upon a similar problem?

System:
Lubuntu 16.04 with amdgpu-pro_16.30.3

5x RX 480 8GB ref model
Asrock FM2A88X + BTC

turn off log files. go to page one of this thread and find the appropriate -xx string to put in your .bat file. I forgot what it was. I suggest everyone turn off their log files unless you have problems.

-dbg debug log and messages. "-dbg 0" - (default) create log file but don't show debug messages.
"-dbg 1" - create log file and show debug messages. "-dbg -1" - no log file and no debug messages.

-logfile debug log file name. After restart, miner will append new log data to the same file. If you want to clear old log data, file name must contain "noappend" string.
If missed, default file name will be used.

fr4nkthetank

legendary

Activity: 2294

Merit: 1182

Now the money is free, and so the people will be

Quote from: GandalfG on July 09, 2016, 08:17:56 PM

Mining with Claymore and get full HDD (128GB SSD) in half hour.
After checking find /var/log/syslog and kern.log grown up to 52GB each.
System write this 4 messages about 4-5 thousands per second !

Code:

Jul 9 23:58:37 test-rig kernel: [ 1399.017519] VM fault (0x01, vmid 6) at page 135290427, read from 'TC3' (0x54433300) (196)
Jul 9 23:58:37 test-rig kernel: [ 1399.017554] amdgpu 0000:04:00.0: GPU fault detected: 147 0x01c84801
Jul 9 23:58:37 test-rig kernel: [ 1399.017557] amdgpu 0000:04:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x08105E39
Jul 9 23:58:37 test-rig kernel: [ 1399.017559] amdgpu 0000:04:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C048001

Jul 9 23:58:37 test-rig kernel: [ 1399.017561] VM fault (0x01, vmid 6) at page 135290425, read from 'TC4' (0x54433400) (72)
Jul 9 23:58:37 test-rig kernel: [ 1399.017567] amdgpu 0000:01:00.0: GPU fault detected: 147 0x01f08801
Jul 9 23:58:37 test-rig kernel: [ 1399.017569] amdgpu 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x08105E3E
Jul 9 23:58:37 test-rig kernel: [ 1399.017570] amdgpu 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C088001

Jul 9 23:58:37 test-rig kernel: [ 1399.017572] VM fault (0x01, vmid 6) at page 135290430, read from 'TC6' (0x54433600) (136)
Jul 9 23:58:37 test-rig kernel: [ 1399.017607] amdgpu 0000:04:00.0: GPU fault detected: 147 0x01e84801
Jul 9 23:58:37 test-rig kernel: [ 1399.017610] amdgpu 0000:04:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x08105E3D
Jul 9 23:58:37 test-rig kernel: [ 1399.017612] amdgpu 0000:04:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C048001

Despite this mine worked properly 24.3 MH/s on each card until the disk is full

Someone also stumbled upon a similar problem?

System:
Lubuntu 16.04 with amdgpu-pro_16.30.3

5x RX 480 8GB ref model
Asrock FM2A88X + BTC

turn off log files. go to page one of this thread and find the appropriate -xx string to put in your .bat file. I forgot what it was. I suggest everyone turn off their log files unless you have problems.

Meech

hero member

Activity: 924

Merit: 1000

I have the latest running in win10 and changed page file to 16gb but after 5 mins rig reboots. Running 4 290x's with Lepa 1600w psu. Anyone else have this happen? Sorry if it's been asked before.

Balgun

newbie

Activity: 8

Merit: 0

i had 5xxx payouts.

madmartyk

legendary

Activity: 2688

Merit: 1030

Yes I am a pirate, 300 years too late!

From the pool FAQ

I have some Sia on my balance, when will I get them?
Payment rounds executed 1 times a day. Current minimum payout is 5000 Sia

madmartyk

legendary

Activity: 2688

Merit: 1030

Yes I am a pirate, 300 years too late!

Quote from: adaseb on July 09, 2016, 10:19:59 PM

Anyone get paid yet by Nanopool?

I have an 1197 balance, I assume they pay out once a day?

adaseb

legendary

Activity: 3808

Merit: 1723

Up to 300% + 200 FS deposit bonuses

Anyone get paid yet by Nanopool?

o00o

member

Activity: 93

Merit: 11

Has anyone been able to conclude whether it remains more profitable to mine ETH+DCR vs that of ETH+SIA on 290/390s?

GandalfG

sr. member

Activity: 259

Merit: 250

Dig your freedom

Mining with Claymore and get full HDD (128GB SSD) in half hour.
After checking find /var/log/syslog and kern.log grown up to 52GB each.
System write this 4 messages about 4-5 thousands per second !

Code:

Jul 9 23:58:37 test-rig kernel: [ 1399.017519] VM fault (0x01, vmid 6) at page 135290427, read from 'TC3' (0x54433300) (196)
Jul 9 23:58:37 test-rig kernel: [ 1399.017554] amdgpu 0000:04:00.0: GPU fault detected: 147 0x01c84801
Jul 9 23:58:37 test-rig kernel: [ 1399.017557] amdgpu 0000:04:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x08105E39
Jul 9 23:58:37 test-rig kernel: [ 1399.017559] amdgpu 0000:04:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C048001

Jul 9 23:58:37 test-rig kernel: [ 1399.017561] VM fault (0x01, vmid 6) at page 135290425, read from 'TC4' (0x54433400) (72)
Jul 9 23:58:37 test-rig kernel: [ 1399.017567] amdgpu 0000:01:00.0: GPU fault detected: 147 0x01f08801
Jul 9 23:58:37 test-rig kernel: [ 1399.017569] amdgpu 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x08105E3E
Jul 9 23:58:37 test-rig kernel: [ 1399.017570] amdgpu 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C088001

Jul 9 23:58:37 test-rig kernel: [ 1399.017572] VM fault (0x01, vmid 6) at page 135290430, read from 'TC6' (0x54433600) (136)
Jul 9 23:58:37 test-rig kernel: [ 1399.017607] amdgpu 0000:04:00.0: GPU fault detected: 147 0x01e84801
Jul 9 23:58:37 test-rig kernel: [ 1399.017610] amdgpu 0000:04:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x08105E3D
Jul 9 23:58:37 test-rig kernel: [ 1399.017612] amdgpu 0000:04:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C048001

Despite this mine worked properly 24.3 MH/s on each card until the disk is full

Someone also stumbled upon a similar problem?

System:
Lubuntu 16.04 with amdgpu-pro_16.30.3

5x RX 480 8GB ref model
Asrock FM2A88X + BTC

densets

newbie

Activity: 36

Merit: 0

Quote from: fittsy on July 08, 2016, 08:25:33 PM

Quote from: densets on July 08, 2016, 08:18:10 PM

only works if i dont specify a worker name for sia
http://sia-eu1.nanopool.org:9980/miner/header?address=YourSiaAddress
instead of

http://sia-eu1.nanopool.org:9980/miner/header?address=YourSiaAddress&worker=YourWorkerName

Is there a way arround this? tried "" but nothing.

It won't show until that miner submits a share. Did you wait long enough to submit a share?

the miner doesnt start if i add the worker name. it just cant connecto to the pool Sad

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

Hi,
http://simplemining.net/ OS is almost ready to deploy.
But i have small problem:
It cant connect to nicehash eth pool, why (accually cant get job) ?

Code:

ETH: Stratum - connecting to 'daggerhashimoto.eu.nicehash.com' <37.58.117.214> port 3353
ETH: Stratum - Connected (daggerhashimoto.eu.nicehash.com:3353)
DUAL MINING MODE ENABLED: ETHEREUM+DECRED
ETH: nicehash stratum mode
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
Watchdog enabled

DCR: Stratum - connecting to 'dcr.suprnova.cc' <178.33.228.14> port 2252
DCR: Stratum - Connected (dcr.suprnova.cc:2252)
DCR: Authorized
DCR: 07/10/16-01:10:14 - New job from dcr.suprnova.cc:2252
ETH: Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'daggerhashimoto.eu.nicehash.com' <37.58.117.214> port 3353
ETH: Stratum - Connected (daggerhashimoto.eu.nicehash.com:3353)
ETH: Job timeout, disconnect, retry in 20 sec...
DCR: 07/10/16-01:11:14 - New job from dcr.suprnova.cc:2252
ETH: Stratum - connecting to 'daggerhashimoto.eu.nicehash.com' <37.58.117.214> port 3353
ETH: Stratum - Connected (daggerhashimoto.eu.nicehash.com:3353)
ETH: Job timeout, disconnect, retry in 20 sec...
DCR: 07/10/16-01:12:14 - New job from dcr.suprnova.cc:2252
ETH: Stratum - connecting to 'daggerhashimoto.eu.nicehash.com' <37.58.117.214> port 3353
ETH: Stratum - Connected (daggerhashimoto.eu.nicehash.com:3353)
ETH: Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'daggerhashimoto.eu.nicehash.com' <37.58.117.214> port 3353
ETH: Stratum - Connected (daggerhashimoto.eu.nicehash.com:3353)
DCR: 07/10/16-01:13:14 - New job from dcr.suprnova.cc:2252

Quote

-epool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -ewal $USER_BTC_ADDRESS -epsw x -esm 3 \
-allpools 1 -mport 0 -estale 0 \
-dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal tytanick.1 -dpsw x -dbg -1

Dowper

full member

Activity: 173

Merit: 100

Someone please help! When I try to mine with RX480, the miner crashes. A have 3 card - 2x270X and 1xRX480. If i try to mine with only 270X, there is no problem, but if I try to mine with all 3 or just with the polaris - the miner crashes. I post last rows from log file:

01:40:59:271   d20   Total cards: 3
01:40:59:287   d20   Initializing...

01:40:59:303   d20   GPU #0 recognized as Radeon RX 480
01:40:59:303   d20   GPU #1 recognized as Radeon 270/270X
01:40:59:318   d20   GPU #2 recognized as Radeon 270/270X
01:40:59:318   d20   POOL/SOLO version
01:40:59:318   d20   b167
01:40:59:350   d20   start building OpenCL program...

I don't know what happened, I was mining with RX480 for 1 day, but then I try some intensity changes and after all I cannot mine with RX480 anymore...

blg42598

hero member

Activity: 867

Merit: 1000

Quote from: dontetris on July 09, 2016, 05:32:31 PM

Quote from: blg42598 on July 09, 2016, 04:15:46 PM

I have 3 rx 480s but he one I use for the monitor is at 18 mhs compared to 26 the others. Is it because it's connected to the monitor?

Same here. I fixed this by not using any monitors and using teamviewer instead...

(also 3x 480s with claymore, its 3x 27.8mhs here with 2250 memories and -10% power)

Cool I'm using teamviewer as well. One of my GPUs always crashes and smells like it's burning. I tried different cables and pcie slots but it still has problems. I'm replacing it with newegg.

drr0ss

member

Activity: 98

Merit: 10

Quote from: GH on July 09, 2016, 11:44:04 AM

Quote from: vapourminer on July 09, 2016, 11:39:35 AM

Quote from: GH on July 09, 2016, 10:42:17 AM

Quote from: vapourminer on July 09, 2016, 08:52:19 AM

Quote from: Mesterlovesz1974 on July 09, 2016, 08:47:52 AM

I can not mine ether and sia. Miner says invalid http response, incorrect data size? Huh

-epool eu1.nanopool.org:9999

port should be 9980

No, 9980 is for SC, parameter -epool is for Ethereum, and port 9999 is correct for stratum. ~~Perhaps you should specify the protocol like in the examples like stratum+tcp://eu1.nanopool.org:9999~~

oops, my bad. thought he meant the sia part didnt work.

No problem, I also believe it's the SIA part which doesn't work, as his URL is quite different to what works for me...

For SIA - nanopool, mandatory to use URL -dpool http://sia-eu1.nanopool.org:9980/miner/header?address=your_sia_wallet -dcoin sia
"miner" is not a name of your worker, this is a URL string

dontetris

newbie

Activity: 47

Merit: 0

Quote from: blg42598 on July 09, 2016, 04:15:46 PM

I have 3 rx 480s but he one I use for the monitor is at 18 mhs compared to 26 the others. Is it because it's connected to the monitor?

Same here. I fixed this by not using any monitors and using teamviewer instead...

(also 3x 480s with claymore, its 3x 27.8mhs here with 2250 memories and -10% power)

GH

member

Activity: 117

Merit: 10

Quote from: blg42598 on July 09, 2016, 04:15:46 PM

I have 3 rx 480s but he one I use for the monitor is at 18 mhs compared to 26 the others. Is it because it's connected to the monitor?

I also noticed that "weaker" cards (like 270, 380) suffer a bit from being responsible for the desktop, but:
1) not that much (5-10%?)
2) no experience with 480s

=sounds quite much for me

blg42598

hero member

Activity: 867

Merit: 1000

I have 3 rx 480s but he one I use for the monitor is at 18 mhs compared to 26 the others. Is it because it's connected to the monitor?

GH

member

Activity: 117

Merit: 10

Quote from: restless on July 09, 2016, 02:28:23 PM

how many Sia?
mining Sia lowers eth/exp hashrate also...
More heat - more power drawed :/

Sounds like you didn't dual-mine Decred. I would say similar rate, similar power like DCR. Claymore already gave some rough examples - off course depending on intensity. For last gen. cards: without sacrificing ethash, around 50% what it would make standalone, around double that if you increase intensity and focus on second coin.

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1234. (Read 6590565 times)