Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1295.

pehoko

full member

Activity: 232

Merit: 100

Quote from: vapourminer on May 25, 2016, 05:15:25 AM

Quote from: osnwt on May 25, 2016, 02:06:21 AM

I could recommend trying GenEthOS distro: https://ethereum-mining.info/en/
It is ubuntu 14.04.4 LTS-based distro that includes many tools for ETH mining (proxies, miners, GPU tweakers and monitoring tools) and is free to use.

thanks! Im grabbing it now.

Well if you have many gpuminers in the rig it will work slow if installed on usb flash as dag loading takes a lot of time (about a hour for 6 gpu) . Clymore miner doesn't have this problem but works slow on linux, tried yesterday on my custom peppermintethos usb flash version. This genethos is nice but WebUI is horrible and too complicated.

vapourminer

legendary

Activity: 4354

Merit: 3614

what is this "brake pedal" you speak of?

Quote from: osnwt on May 25, 2016, 02:06:21 AM

I could recommend trying GenEthOS distro: https://ethereum-mining.info/en/
It is ubuntu 14.04.4 LTS-based distro that includes many tools for ETH mining (proxies, miners, GPU tweakers and monitoring tools) and is free to use.

thanks! Im grabbing it now.

billsmith

newbie

Activity: 49

Merit: 0

Quote from: markoz on May 24, 2016, 02:57:23 PM

Quote from: billsmith on May 23, 2016, 11:19:54 AM

Ready the first version of the monitoring for Android - https://play.google.com/store/apps/details?id=ua.com.bcmob.claymoresdualminermonitor

i cant access settings, how do you set it to access miner from outside network?

@javi
You need to forward port to point to your local ip where manager is. For example if your local ip where manager is is 192.168.88.1 and your public ip is 44.99.512.222 you need to configure your ruter in firewall/nat destination to forward port 8000 so when you type 44.99.512.222:8000 it will point to 192.168.88.1:8000. You need to set static ip for your local comp where manager is. It depends on ruter how you need to configure it but allmost all is the same in nat settings. If you are behind mikrotik ruterboard like me then in your firewall settings-nat-+ add dstnat dstport 8000 and in action dstnat to adress :localip: dstport 8000

If your external Dynamic IP, also need to use the service dyndns

osnwt

sr. member

Activity: 353

Merit: 251

Quote from: pehoko on May 25, 2016, 04:32:14 AM

Why linux versoin works much slower than windows?

Actually, I also found that. I have identical 7950 on both platforms. Both run at 1050/1550 +20%. But they have different hashrate.
Linux: 19.494, Windows: 20.013

I thought it is due to non-identical powerplay options.

pehoko

full member

Activity: 232

Merit: 100

Why linux versoin works much slower than windows?

bouc

jr. member

Activity: 44

Merit: 1

Quote from: Walrusbonzo on May 25, 2016, 02:35:42 AM

Are you using a 290/290x/390/390x by any chance, they crash to a blank screen when undervolting? Maybe Nano, I've never used a Nano though.

I had the same issue. The problem with undervolting these chips using something like MSI AB is that the voltage adjustment is an offset and applied across all states(7 different DPMs). While I found all my cards would happily run with a -100mv adjustment at full load(DPM7), even at 1050MHz core, as soon as they went idle they would crash.

Why? This is because the offset is applied to the other DPM states of the core across the frequency range, and presumably the core isn't stable at these other states with the -100mv offset also applied.

I fixed the problem though! I went here http://www.overclock.net/t/1561372/hawaii-bios-editing-290-290x-295x2-390-390x and read about editing the BIOS.

I ended up setting custom voltages and frequencies for the 8 different states so I no longer need to set a negative offset in any software. Now I can run them at full load, at 1050MHz core, stable, with less than 1.1v. And they don't crash as soon as the miner stops running, because voltages for the other states are still high enough for stable operation.

I can provide an example BIOS if you want? I did it for my ASUS, XFX and 2 MSI 290x cards. Fixed the issue for all of them.

Yes thanks for this info !
I have the same problem but not all time...
I'll go into bios mod.

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: drr0ss on May 25, 2016, 12:58:20 AM

Claymore, can you add truncate and log rotation of log file?
We can do this via task scheduler or cron, however is more comfortable miner to make this

Well, when miner fails I want to see entire log, not some part only.

Quote from: citronick on May 24, 2016, 11:49:58 PM

Hi Claymore,

All my rigs are now with v4.4 and doing very well.
The CDM Manager is fantastic.
Can you consider these CDMM features for future versions?
1. Restart counter for each Rig/Miner (eg. how many times the rig has restarted - triggered -r switch)
2. Failover counter for each Rig/Miner (eg. how many time the rig has failover to backup ETH pool)
The features above, will be very useful for troubleshooting and ensuring mining operations are in tip-top condition.
Thanks

Ok, I'll add it in my todo list.

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: zorvalth on May 25, 2016, 01:31:22 AM

@Claymore, is there a way to activate email notifications on f2pool? especially in epools.txt?

Thanks!

You should always read pool help because it is always pool-related. For f2pool the only info I found is:
....
How can I receive notification in case of miner failure?
Please check the mining notification service provided by BTCKan.
....

That is all that they can say.

Walrusbonzo

hero member

Activity: 682

Merit: 500

Quote from: MysteryX on May 24, 2016, 10:12:25 PM

I'm having issues with undervolting, if I set the core voltage lower before starting the miner it crashes the whole system, if I do it after starting the miner it's solid until there's a disconnect/ reconnect for whatever reason, any workarounds for this? Maybe set a high power limit? Thanks.

Are you using a 290/290x/390/390x by any chance, they crash to a blank screen when undervolting? Maybe Nano, I've never used a Nano though.

I had the same issue. The problem with undervolting these chips using something like MSI AB is that the voltage adjustment is an offset and applied across all states(7 different DPMs). While I found all my cards would happily run with a -100mv adjustment at full load(DPM7), even at 1050MHz core, as soon as they went idle they would crash.

Why? This is because the offset is applied to the other DPM states of the core across the frequency range, and presumably the core isn't stable at these other states with the -100mv offset also applied.

I fixed the problem though! I went here http://www.overclock.net/t/1561372/hawaii-bios-editing-290-290x-295x2-390-390x and read about editing the BIOS.

I ended up setting custom voltages and frequencies for the 8 different states so I no longer need to set a negative offset in any software. Now I can run them at full load, at 1050MHz core, stable, with less than 1.1v. And they don't crash as soon as the miner stops running, because voltages for the other states are still high enough for stable operation.

I can provide an example BIOS if you want? I did it for my ASUS, XFX and 2 MSI 290x cards. Fixed the issue for all of them.

osnwt

sr. member

Activity: 353

Merit: 251

Quote from: vapourminer on May 25, 2016, 01:01:25 AM

going to be setting up an ubuntu box this weekend, it will have a 390 and 380, based on an old q6600 system. 850 watt seasonic.
which ubuntu? 14.04 lts seems to be the recommended.
any tips? i know just enough *nix to make possibly better than average mistakes faster.

I could recommend trying GenEthOS distro: https://ethereum-mining.info/en/
It is ubuntu 14.04.4 LTS-based distro that includes many tools for ETH mining (proxies, miners, GPU tweakers and monitoring tools) and is free to use. Runs from USB stick (8-16GB) if you want it, or HDD/SSD. It does not contain CDM (since it is not an open source), but perfectly runs the binary. You need to tweak few files via ssh or using Webmin GUI. It also runs basic web rig monitoring UI that includes GPU temps, fans, frequencies and core voltages. The only disadvantage is that by default it uses Russian and most comments in files are in both English and Russian duplicated or mixed, you shoud change /etc/default/locale (or via web UI) to English if you like. Still, it runs very stable and unlike some other distros is free to download. I remember some other ETH mining distro that is sold on SSD using open source Linux, that's against GNU license.

zorvalth

full member

Activity: 223

Merit: 100

@Claymore, is there a way to activate email notifications on f2pool? especially in epools.txt?

Thanks!

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: MysteryX on May 24, 2016, 10:12:25 PM

I'm having issues with undervolting, if I set the core voltage lower before starting the miner it crashes the whole system, if I do it after starting the miner it's solid until there's a disconnect/ reconnect for whatever reason, any workarounds for this? Maybe set a high power limit? Thanks.

have you tried playing around with these switches:

-cclock set target GPU core clock speed, in MHz. If not specified or zero, miner will not change current clock speed. You can also specify values for every card, for example "-cclock 1000,1050,1100,0".
Unfortunately, AMD blocked underclocking for some reason, you can overclock only.

-mclock set target GPU memory clock speed, in MHz. If not specified or zero, miner will not change current clock speed. You can also specify values for every card, for example "-mclock 1200,1250,1200,0".
Unfortunately, AMD blocked underclocking for some reason, you can overclock only.

-powlim set power limit, from -50 to 50. If not specified, miner will not change power limit. You can also specify values for every card, for example "-powlim 20,-20,0,10".

vapourminer

legendary

Activity: 4354

Merit: 3614

what is this "brake pedal" you speak of?

going to be setting up an ubuntu box this weekend, it will have a 390 and 380, based on an old q6600 system. 850 watt seasonic.

which ubuntu? 14.04 lts seems to be the recommended.

any tips? i know just enough *nix to make possibly better than average mistakes faster.

drr0ss

member

Activity: 98

Merit: 10

Quote from: ?? on ??

Quote from: drr0ss on May 24, 2016, 04:32:33 PM

Quote from: ?? on ??

The DAG takes maybe 3 seconds to generate on the GPU in my SGMiner port - I'm assuming Claymore has similar performance.

Wolf0, were we can find your miner?
10x

Who said I released it?

@Ok Wolf0

Claymore, can you add truncate and log rotation of log file?
We can do this via task scheduler or cron, however is more comfortable miner to make this

10x

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Hi Claymore,

All my rigs are now with v4.4 and doing very well.

The CDM Manager is fantastic.

Can you consider these CDMM features for future versions?

1. Restart counter for each Rig/Miner (eg. how many times the rig has restarted - triggered -r switch)

2. Failover counter for each Rig/Miner (eg. how many time the rig has failover to backup ETH pool)

The features above, will be very useful for troubleshooting and ensuring mining operations are in tip-top condition.

Thanks

MysteryX

member

Activity: 98

Merit: 10

I'm having issues with undervolting, if I set the core voltage lower before starting the miner it crashes the whole system, if I do it after starting the miner it's solid until there's a disconnect/ reconnect for whatever reason, any workarounds for this? Maybe set a high power limit? Thanks.

osnwt

sr. member

Activity: 353

Merit: 251

Quote from: fredeq on May 24, 2016, 07:39:43 PM

Sounds like a patch is needed ineed.
Guess you have tried to change voltage with forcing `-P 3`, even if not listed by default?

Yeap, no luck.

Reflashed with patched BIOS, good results for now, yet have to see how stable they will be:

Code:

work@miner-1:~/dual-ethereum-decred$ atitweak -s
0. AMD Radeon HD 7900 Series  (:0.0)
    engine clock 1050MHz, memory clock 1550MHz, core voltage 1.09VDC, performance level 2, utilization 64%
    fan speed 49% (2743 RPM) (user-defined)
    temperature 65 C
    powertune 20%
1. AMD Radeon HD 7900 Series (:0.1)
    engine clock 1150MHz, memory clock 1500MHz, core voltage 1.15VDC, performance level 3, utilization 64%
    fan speed 100% (3075 RPM) (user-defined)
    temperature 70 C
    powertune 20%
2. AMD Radeon HD 7900 Series (:0.2)
    engine clock 1150MHz, memory clock 1500MHz, core voltage 1.15VDC, performance level 3, utilization 63%
    fan speed 95% (2972 RPM) (user-defined)
    temperature 63 C
    powertune 20%

fredeq

legendary

Activity: 1537

Merit: 1005

Sounds like a patch is needed ineed.
Guess you have tried to change voltage with forcing `-P 3`, even if not listed by default?

osnwt

sr. member

Activity: 353

Merit: 251

Quote from: fredeq on May 24, 2016, 06:56:54 PM

Ah didnt realize you were on linux.
Have you tried? https://github.com/mjmvisser/adl3

Sure, but that's what I was asked for:

Code:

work@miner-1:~/dual-ethereum-decred$ atitweak -l
0. AMD Radeon HD 7900 Series  (:0.0)
    engine clock range is 150 - 1100MHz
    memory clock range is 75 - 1575MHz
    core voltage range is 0.8 - 1.09VDC
    performance level 0: engine clock 300MHz, memory clock 150MHz, core voltage 0.85VDC
    performance level 1: engine clock 1050MHz, memory clock 1550MHz, core voltage 1.09VDC
    fan speed range: 0 - 100%,  1100 - 3300 RPM
1. AMD Radeon HD 7900 Series (:0.1)
    engine clock range is 150 - 1700MHz
    memory clock range is 75 - 2000MHz
    core voltage range is 0.85 - 1.256VDC
    performance level 0: engine clock 300MHz, memory clock 150MHz, core voltage 0.85VDC
    performance level 1: engine clock 1150MHz, memory clock 1500MHz, core voltage 1.256VDC
    fan speed range: 0 - 100%,  700 - 5900 RPM
2. AMD Radeon HD 7900 Series (:0.2)
    engine clock range is 150 - 1700MHz
    memory clock range is 75 - 2000MHz
    core voltage range is 0.85 - 1.256VDC
    performance level 0: engine clock 300MHz, memory clock 150MHz, core voltage 0.85VDC
    performance level 1: engine clock 1150MHz, memory clock 1500MHz, core voltage 1.256VDC
    fan speed range: 0 - 100%,  700 - 5900 RPM

work@miner-1:~/dual-ethereum-decred$ atitweak -s
0. AMD Radeon HD 7900 Series  (:0.0)
    engine clock 1050MHz, memory clock 1550MHz, core voltage 1.09VDC, performance level 2, utilization 64%
    fan speed 100% (3264 RPM) (user-defined)
    temperature 67 C
    powertune 20%
1. AMD Radeon HD 7900 Series (:0.1)
    engine clock 1150MHz, memory clock 1500MHz, core voltage 1.256VDC, performance level 3, utilization 64%
    fan speed 100% (3010 RPM) (user-defined)
    temperature 85 C
    powertune 20%
2. AMD Radeon HD 7900 Series (:0.2)
    engine clock 1150MHz, memory clock 1500MHz, core voltage 1.256VDC, performance level 3, utilization 64%
    fan speed 100% (2900 RPM) (user-defined)
    temperature 78 C
    powertune 20%

That is, it lists only 2 performance levels (0 and 1) and can change settings for them. But cards work actually at perf levels 2 and 3, and there is no way to alter settings. Someone wrote that he patched the tool to use perf levels above 1, but it did not change the voltage. It seems that BIOS mod is the only way to change voltages for 79xx cards (newer cards use version 6 of API and there is another utility for them that should work).

fredeq

legendary

Activity: 1537

Merit: 1005

Quote from: osnwt on May 24, 2016, 06:26:57 PM

Quote from: fredeq on May 24, 2016, 06:17:42 PM

Undervolt by 100mV and enjoy -10 temps Wink

It works on Windows. But I even asked here if someone managed to undervolt on Linux (w/o BIOS mod) and got no replies. I can reflash BIOS, and even did that. By default these 7970s have 1.256V max, and I patched in 1.100. It worked on Linux, crashed on miner start on Windows (did not use serialised init). With 1.150 they were stable. Still, I wish I find a way to undervolt them on Linux w/o BIOS mod, I don't believe there is no such tool, I just need to find it.

Ah didnt realize you were on linux.
Have you tried? https://github.com/mjmvisser/adl3

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1295. (Read 6590757 times)