Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1345.

osnwt

sr. member

Activity: 353

Merit: 251

I'm trying to mine at ethermine.org. All works except two things (tested on both 4.0 beta and 4.1):
- Sometimes ethermine reports doubled "Reported hashrate" for the account, but always correct hashrate for the rig (just one rig used).
- With -esm 0 or -esm 1 it still does not show stats "Shares (Invalid / Valid / %)". All are always 0.

Command line:

Code:

EthDcrMiner64.exe -ewal 0xWALLET -epsw x -eworker rig01 -epool eu1.ethermine.org:4444 -esm 1

What can be wrong?

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: froilan_rivero on April 29, 2016, 03:28:05 PM

Received unknown response:

try "-esm 2" option. Or better use different pool that has some help page that mentions what proxy mode should be used so you can understand what "-esm" mode must be used. Because at the moment there are three stratum modes/proxies and it's a good idea to mention on help page what stratum proxy must be used.

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: dpcoinz on April 29, 2016, 03:20:59 PM

Quote from: Claymore on April 29, 2016, 01:49:33 PM

Quote from: dpcoinz on April 29, 2016, 01:41:04 PM

@claymore : Is it possible to use your miner on miningrigrentals? if so could you help with the options. I've tried multiple qtminer combinations, but so far nothing works. according to miningrigrentals, they have a qtminer example that shows : qtminer -s us-west01.miningrigrentals.com:3333 -u username.rignumber -G

Love all the work you've done on this miner. Thanks!!!

I read this: https://www.miningrigrentals.com/rigs/hashimotog
....
This algo is typically used to mine Ethereum. This section is for the GETWORK miner and related pools only. Typically this is ethminer. Attempting to use rigs from this section with stratum based pools will fail.
....

So it seems they don't support stratum, I cannot find page with your sample about qtminer.

They haven't updated their faq about the stratum side. When you setup a Dagger-Hashimoto(S) rig, in the properties block of the rig they give an example of a qtminer command line. That is the only place I have found an example for their stratum based dagger-hashimoto rigs.

dp

if qtminer is supported, my miner will work too:
EthDcrMiner64.exe -epool us-west01.miningrigrentals.com:3333 -ewal username.rignumber -epsw x -esm 1 -allpools 1
If it does not work, read the log for details about error.

froilan_rivero

newbie

Activity: 25

Merit: 0

Quote from: froilan_rivero on April 29, 2016, 03:07:33 PM

Quote from: froilan_rivero on April 29, 2016, 03:00:15 PM

Quote from: Claymore on April 29, 2016, 10:43:50 AM

Guys, it's a good idea to read OP or readme.
froilan_rivero - Expanse is supported, search "Ethereum forks mining" string in readme or OP.
Doramha - Read "FAILOVER" section: "Every pool has 3 connection attempts."

This is definately the best miner around thank you so much.

Claymore, Will it work in dual mode? EXP+DCR?

DevFee: ETH: 04/29/16-15:56:40 - New job (target 0x0000000000000000) from us1.et
hermine.org:4444
ETH: Stratum - connecting to 'exp.suprnova.cc' <37.59.18.108> port 4000
ETH: Stratum - Connected (exp.suprnova.cc:4000)
DevFee: ETH: 04/29/16-15:56:50 - New job (target 0x0000000000000000) from us1.et
hermine.org:4444
DevFee: ETH: 04/29/16-15:56:53 - New job (target 0x0000000000000000) from us1.et
hermine.org:4444
Received unknown response: {"id":null,"method":"mining.notify","params":["1695",
"0xe794400c315d44b7117b6f0e437046c97d0761906d51ef307b48c51fc1c9706d","0x6d29f6dd
1270e49744bd5377ec86395b2de2abbe54bae16281b8e39b35538dcd","0x0000000394427b08175
efa9a9eb59b9123e2969bf19bf272b20787ed022fbe6c",true]}
Received unknown response: {"id":null,"method":"mining.notify","params":["1696",
"0xe794400c315d44b7117b6f0e437046c97d0761906d51ef307b48c51fc1c9706d","0x6d29f6dd
1270e49744bd5377ec86395b2de2abbe54bae16281b8e39b35538dcd","0x0000000394427b08175
efa9a9eb59b9123e2969bf19bf272b20787ed022fbe6c",true]}
ETH: Job timeout, disconnect, retry in 20 sec...
DCR: 04/29/16-15:57:13 - New job (target 0x00000000ffff0000, block #23720) from
dcr.suprnova.cc:2252
DevFee: stop mining and disconnect

ailikun

sr. member

Activity: 406

Merit: 254

Quote from: Claymore on April 29, 2016, 02:56:07 PM

Quote from: ailikun on April 29, 2016, 02:25:25 PM

Quote from: Claymore on April 29, 2016, 02:14:34 PM

You can PM me log file and I will check how many shares miner submitted.

Hi Claymore, thnx for your miner, its worth every penny that we pay you, for using it.
A few weeks ago, you said, that once the miner becomes a stable version, you will port it to linux...
Is it possible, now?
Because atleast 10% of all the miners, are using linux.

I'm working on solo mode, monitoring/management utility and linux version. Not sure what will be released first, perhaps I will have linux version in 1-2 days (assuming v4.1 is stable).

Thnx, linux version would be great, for linux people like me.
We will be waiting.

dpcoinz

newbie

Activity: 24

Merit: 0

Quote from: Claymore on April 29, 2016, 01:49:33 PM

Quote from: dpcoinz on April 29, 2016, 01:41:04 PM

@claymore : Is it possible to use your miner on miningrigrentals? if so could you help with the options. I've tried multiple qtminer combinations, but so far nothing works. according to miningrigrentals, they have a qtminer example that shows : qtminer -s us-west01.miningrigrentals.com:3333 -u username.rignumber -G

Love all the work you've done on this miner. Thanks!!!

I read this: https://www.miningrigrentals.com/rigs/hashimotog
....
This algo is typically used to mine Ethereum. This section is for the GETWORK miner and related pools only. Typically this is ethminer. Attempting to use rigs from this section with stratum based pools will fail.
....

So it seems they don't support stratum, I cannot find page with your sample about qtminer.

They haven't updated their faq about the stratum side. When you setup a Dagger-Hashimoto(S) rig, in the properties block of the rig they give an example of a qtminer command line. That is the only place I have found an example for their stratum based dagger-hashimoto rigs.

dp

kanoptx

sr. member

Activity: 406

Merit: 250

www.cryptocompare.com

Quote from: froilan_rivero on April 29, 2016, 03:07:33 PM

Quote from: froilan_rivero on April 29, 2016, 03:00:15 PM

Quote from: Claymore on April 29, 2016, 10:43:50 AM

Guys, it's a good idea to read OP or readme.
froilan_rivero - Expanse is supported, search "Ethereum forks mining" string in readme or OP.
Doramha - Read "FAILOVER" section: "Every pool has 3 connection attempts."

This is definately the best miner around thank you so much.

Claymore, Will it work in dual mode? EXP+DCR?

yes, it will. read the original post. (i asked the same thing xD)

froilan_rivero

newbie

Activity: 25

Merit: 0

Quote from: froilan_rivero on April 29, 2016, 03:00:15 PM

Quote from: Claymore on April 29, 2016, 10:43:50 AM

Guys, it's a good idea to read OP or readme.
froilan_rivero - Expanse is supported, search "Ethereum forks mining" string in readme or OP.
Doramha - Read "FAILOVER" section: "Every pool has 3 connection attempts."

This is definately the best miner around thank you so much.

Claymore, Will it work in dual mode? EXP+DCR?

froilan_rivero

newbie

Activity: 25

Merit: 0

Quote from: Claymore on April 29, 2016, 10:43:50 AM

Guys, it's a good idea to read OP or readme.
froilan_rivero - Expanse is supported, search "Ethereum forks mining" string in readme or OP.
Doramha - Read "FAILOVER" section: "Every pool has 3 connection attempts."

This is definately the best miner around thank you so much.

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: ailikun on April 29, 2016, 02:25:25 PM

Quote from: Claymore on April 29, 2016, 02:14:34 PM

You can PM me log file and I will check how many shares miner submitted.

Hi Claymore, thnx for your miner, its worth every penny that we pay you, for using it.
A few weeks ago, you said, that once the miner becomes a stable version, you will port it to linux...
Is it possible, now?
Because atleast 10% of all the miners, are using linux.

I'm working on solo mode, monitoring/management utility and linux version. Not sure what will be released first, perhaps I will have linux version in 1-2 days (assuming v4.1 is stable).

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: rednoW on April 29, 2016, 02:46:13 PM

Quote from: Claymore on April 29, 2016, 02:14:34 PM

You can PM me log file and I will check how many shares miner submitted.

Thanks! Fortunately I can do this job by myself ))

Here is my calc, I have 2 rigs named 7990 and 7950 ))

Code:

time  shares(7990) shares (7950)
02:00 2127	   874
03:00 2250	   946
=================================
17:00 3985	   1977
18:00 4122	   2040


Shares delta

1. 123	+	72 = 195

2. 137	+	63 = 200

Dwarf statistics shows only 98 shares for 02:00-03:00 period and only 102 shares for 17:00-18:00
All time is GMT + 3

If miner shows shares and they are accepted (can be checked in log file that pool sent "result: true" answer) - it is the problem of the pool.

rednoW

legendary

Activity: 1510

Merit: 1003

Quote from: Claymore on April 29, 2016, 02:14:34 PM

You can PM me log file and I will check how many shares miner submitted.

Thanks! Fortunately I can do this job by myself ))

Here is my calc, I have 2 rigs named 7990 and 7950 ))

Code:

time  shares(7990) shares (7950)
02:00 2127	   874
03:00 2250	   946
=================================
17:00 3985	   1977
18:00 4122	   2040


Shares delta

1. 123	+	72 = 195

2. 137	+	63 = 200

Dwarf statistics shows only 98 shares for 02:00-03:00 period and only 102 shares for 17:00-18:00
All time is GMT + 3

Marvell1

legendary

Activity: 2408

Merit: 1102

Leading Crypto Sports Betting & Casino Platform

Quote from: ailikun on April 29, 2016, 02:25:25 PM

Quote from: Claymore on April 29, 2016, 02:14:34 PM

You can PM me log file and I will check how many shares miner submitted.

Hi Claymore, thnx for your miner, its worth every penny that we pay you, for using it.

A few weeks ago, you said, that once the miner becomes a stable version, you will port it to linux...
Is it possible, now?

Because atleast 10% of all the miners, are using linux.

Linux sux jk

Please work on the solo proxy and nvidia support before you look at other OS's

o00o

member

Activity: 93

Merit: 11

Quote from: DragoStefan on April 29, 2016, 01:51:03 PM

Quote from: o00o on April 29, 2016, 01:39:19 PM

Quote from: DragoStefan on April 29, 2016, 01:31:28 PM

Hello!
I need some help, I am mining eth for a month now but not on stratum can someone share some links on what i need and how to use stratum because I see that i can get a better hashrate this way.. and then if I can make it work I can try the Eth+Dcr.

Thanks for the help! I appreciate IT!

I've been mining Ethereum over @ Ethpool and DCR via Coinmine/Suprnova which both support stratum. Simply replace your current pools in your .bat file unless you can confirm they already do support the stratum protocol and you're good to go buddy!

ETH= us1.ethpool.org:3333

DCR= stratum+tcp://dcr.suprnova.cc:2252

I am mining with getwork not stratum. I don't need to install anything else for switching to stratum mode?

That is correct

Quote from: Claymore on April 29, 2016, 01:45:58 PM

.

Quote from: o00o on April 29, 2016, 01:30:36 PM

@Claymore
I uploaded my log and would be very grateful if you can take a quick glance at it.
https://dropfile.to/aCSRy1d

OpenCL cannot allocate memory buffers. Unfortunately I have no idea why, but it's uncommon error, something is wrong with your system if it cannot allocate 1.5GB of video RAM.

I find it hard to believe something may be wrong with my system since v1.2 as well as Ethminer work just fine.

ailikun

sr. member

Activity: 406

Merit: 254

Quote from: Claymore on April 29, 2016, 02:14:34 PM

You can PM me log file and I will check how many shares miner submitted.

Hi Claymore, thnx for your miner, its worth every penny that we pay you, for using it.

A few weeks ago, you said, that once the miner becomes a stable version, you will port it to linux...
Is it possible, now?

Because atleast 10% of all the miners, are using linux.

Vaccinus

sr. member

Activity: 406

Merit: 250

why no love for nvidia

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: rednoW on April 29, 2016, 01:11:32 PM

Thank you for quick response.
Usually I have 200 shares an hour, this is rather stable, +- 20.
But on 2:00 I received only 98 shares and on 17:00 only 102 shares - it is exacly the half of my usual rate. And the ru-server was down exactly during 30 minutes both times.
I already write to dwarfpool admin with my problem. Will hope he will find time to answer.

You can PM me log file and I will check how many shares miner submitted.

DragoStefan

full member

Activity: 230

Merit: 100

Quote from: o00o on April 29, 2016, 01:39:19 PM

Quote from: DragoStefan on April 29, 2016, 01:31:28 PM

Hello!
I need some help, I am mining eth for a month now but not on stratum can someone share some links on what i need and how to use stratum because I see that i can get a better hashrate this way.. and then if I can make it work I can try the Eth+Dcr.

Thanks for the help! I appreciate IT!

I've been mining Ethereum over @ Ethpool and DCR via Coinmine/Suprnova which both support stratum. Simply replace your current pools in your .bat file unless you can confirm they already do support the stratum protocol and you're good to go buddy!

ETH= us1.ethpool.org:3333

DCR= stratum+tcp://dcr.suprnova.cc:2252

I am mining with getwork not stratum. I don't need to install anything else for switching to stratum mode?

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: dpcoinz on April 29, 2016, 01:41:04 PM

@claymore : Is it possible to use your miner on miningrigrentals? if so could you help with the options. I've tried multiple qtminer combinations, but so far nothing works. according to miningrigrentals, they have a qtminer example that shows : qtminer -s us-west01.miningrigrentals.com:3333 -u username.rignumber -G

Love all the work you've done on this miner. Thanks!!!

I read this: https://www.miningrigrentals.com/rigs/hashimotog
....
This algo is typically used to mine Ethereum. This section is for the GETWORK miner and related pools only. Typically this is ethminer. Attempting to use rigs from this section with stratum based pools will fail.
....

So it seems they don't support stratum, I cannot find page with your sample about qtminer.

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: o00o on April 29, 2016, 01:30:36 PM

@Claymore
I uploaded my log and would be very grateful if you can take a quick glance at it.
https://dropfile.to/aCSRy1d

OpenCL cannot allocate memory buffers. Unfortunately I have no idea why, but it's uncommon error, something is wrong with your system if it cannot allocate 1.5GB of video RAM.

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1345. (Read 6590757 times)