Author

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1359. (Read 6590565 times)

hero member
Activity: 799
Merit: 1000
Thats offtopic here, but all that are marked as
Quote
(precalculated*)   immature blocks

are just that - precalculated, subject to change.

Take note of these below which are checkmarked with

Yes, true. but even after they're precalculated they are still irregular. just wondering if the -esm 0 command would fix this somehow.

check it:

16-04-25, 12:59:59 (2 hours ago)   90   0.005   0.03087983   ✓
16-04-25, 11:59:59 (3 hours ago)   114   0.006   0.04219116   ✓
16-04-25, 10:59:59 (4 hours ago)   97   0.005   0.03350993   ✓
16-04-25, 09:59:59 (5 hours ago)   122   0.007   0.04164290   ✓
16-04-25, 08:59:59 (6 hours ago)   110   0.006   0.03483970   ✓
16-04-25, 07:59:59 (7 hours ago)   112   0.007   0.03761664   ✓
16-04-25, 06:59:59 (8 hours ago)   110   0.007   0.03325516   ✓
16-04-25, 05:59:59 (9 hours ago)   112   0.007   0.03276627   ✓
16-04-25, 04:59:59 (10 hours ago)   85   0.005   0.02941316   ✓
16-04-25, 03:59:59 (11 hours ago)   128   0.007   0.04214431   ✓
16-04-25, 02:59:59 (12 hours ago)   99   0.005   0.02642181   ✓
16-04-25, 01:59:59 (13 hours ago)   96   0.005   0.02414533   ✓
16-04-25, 00:59:59 (14 hours ago)   99   0.005   0.03199759   ✓

is this normal or should i try the -esm 0 command? thx

-esm 0 is default setting and only setting that will work for connecting to dwarfpool. Note the variation in the number of shares u submit each hour this is the reason for the variation in hourly earnings, some hours you will have more shares some you will have less. Every miner has these variations and the earnings for the hour is calculated on how many shares every miner submitted in that hour vs how many blocks/uncles the pool found in that hour. For example you submitted 0.005% of total shares in one hour therefore you get paid 0.005% of pools total earnings for that hour.
legendary
Activity: 1564
Merit: 1027

is this normal or should i try the -esm 0 command? thx

From the OP:

-esm   Ethereum Stratum mode. 0 - eth-proxy mode (for example, dwarpool.com), 1 - qtminer mode (for example, ethpool.org), 2 - miner-proxy mode (for example, coinotron.com). 0 is default.

If you are not using the -esm parameter, you are already in -esm 0 mode.  Grin
sr. member
Activity: 406
Merit: 250
www.cryptocompare.com
Thats offtopic here, but all that are marked as
Quote
(precalculated*)   immature blocks

are just that - precalculated, subject to change.

Take note of these below which are checkmarked with

Yes, true. but even after they're precalculated they are still irregular. just wondering if the -esm 0 command would fix this somehow.

check it:

16-04-25, 12:59:59 (2 hours ago)   90   0.005   0.03087983   ✓
16-04-25, 11:59:59 (3 hours ago)   114   0.006   0.04219116   ✓
16-04-25, 10:59:59 (4 hours ago)   97   0.005   0.03350993   ✓
16-04-25, 09:59:59 (5 hours ago)   122   0.007   0.04164290   ✓
16-04-25, 08:59:59 (6 hours ago)   110   0.006   0.03483970   ✓
16-04-25, 07:59:59 (7 hours ago)   112   0.007   0.03761664   ✓
16-04-25, 06:59:59 (8 hours ago)   110   0.007   0.03325516   ✓
16-04-25, 05:59:59 (9 hours ago)   112   0.007   0.03276627   ✓
16-04-25, 04:59:59 (10 hours ago)   85   0.005   0.02941316   ✓
16-04-25, 03:59:59 (11 hours ago)   128   0.007   0.04214431   ✓
16-04-25, 02:59:59 (12 hours ago)   99   0.005   0.02642181   ✓
16-04-25, 01:59:59 (13 hours ago)   96   0.005   0.02414533   ✓
16-04-25, 00:59:59 (14 hours ago)   99   0.005   0.03199759   ✓

is this normal or should i try the -esm 0 command? thx
legendary
Activity: 1197
Merit: 1000
Hi Guys,

It is not clear in the first post how to mine on coinmine.pl pool... Here you are (we support stratum on ETH and DCR pools):

Code:
EthDcrMiner64.exe -epool eth.coinmine.pl:4000 -ewal USERNAME.WORKER -esm 2 -epsw WORKER_PASS -dpool stratum+tcp://dcr.coinmine.pl:2222 -dwal USERNAME.WORKER -dpsw WORKER_PASS  -allpools 1

feeleep
legendary
Activity: 1151
Merit: 1001
Thats offtopic here, but all that are marked as
Quote
(precalculated*)   immature blocks

are just that - precalculated, subject to change.

Take note of these below which are checkmarked with
sr. member
Activity: 406
Merit: 250
www.cryptocompare.com
well, if i have GPU 1,2,3 in GPU-Z at 60,61,62. i can check temps* on the claymore miner and it will be something like 62, 60, 61. so I know that gpu 1 in claymore = gpu 3 in gpu-z. gpu 2 in claymore = gpu 1 in gpu-z and gpu 3 in claymore =gpu 2 in gpu-z.

ofcourse this in annoying. but it's a small thing and i think that more important updates are coming. but if mr. claymore could fix this it would be, as always, highly appreceated Smiley


ON ANOTHER NOTE: Payouts in dwarfpool are kind of irregular wil using this command fix it: -esm 0? i'm not using it. just wanted to check before restarting miner with this config. thx Smiley
Dwarfpool pays 6 times a day IF one has more than 1.01 ethers check whats written there:
Quote
Now possible to set individual minimum amount of autopayouts. Also you can choose only one time per day. Email to admin. By default 6 times per day from 1.01 ETH

what i ment was hour "payments" that show up on the website. they update shares and profit every hour. sometimes i'll get 0.04... sometimes 0.028... it's rly unregular. not sure it's something i'm doing (like not specifing stratum with that command) or just the "luck" factor that applies to solo mining.
legendary
Activity: 1834
Merit: 1080
---- winter*juvia -----

I get about 20-30% rejected shares at suprnova diff 8.  At diff 64 it takes too much time between shares.
Diff 16 and 32 would be lovely.



At zpool i got around 5-10% rejects.



Reason ur rejects on suprnova are so high is diff 8 port is getwork not stratum, use the ccminer stratum port unfortunately it is diff 1 but it doesnt really matter and rejects will go much lower 1-2% total. I had 25% reject on suprnova prior to doing the above.

Same here.  Much better now.

using v3.2, mining DCR at zpool, i get about 1-2% rejects, much better than previous versions (8-9%)
I don't use the intensity, difficulty settings, just leave it default and let zpool's DCR Stratum decide for me.
My GPUs are MSI R9-390s.
legendary
Activity: 1151
Merit: 1001
well, if i have GPU 1,2,3 in GPU-Z at 60,61,62. i can check temps* on the claymore miner and it will be something like 62, 60, 61. so I know that gpu 1 in claymore = gpu 3 in gpu-z. gpu 2 in claymore = gpu 1 in gpu-z and gpu 3 in claymore =gpu 2 in gpu-z.

ofcourse this in annoying. but it's a small thing and i think that more important updates are coming. but if mr. claymore could fix this it would be, as always, highly appreceated Smiley


ON ANOTHER NOTE: Payouts in dwarfpool are kind of irregular wil using this command fix it: -esm 0? i'm not using it. just wanted to check before restarting miner with this config. thx Smiley
Dwarfpool pays 6 times a day IF one has more than 1.01 ethers check whats written there:
Quote
Now possible to set individual minimum amount of autopayouts. Also you can choose only one time per day. Email to admin. By default 6 times per day from 1.01 ETH
sr. member
Activity: 272
Merit: 250
Another feature that i'd like to suggest is a way to for us to identify which card on a rig relates to the GPU number.  The only way I can think of doing this would be, for example, if you hit CTRL+0, then it will adjust GPU#0's FAN to 100% while adjusting all other GPU fans on that rig to 5% for 15 seconds, that way we can know that GPU0 will be the card on the rig thats running the fans at full speed.  This would be a huge help with troubleshooting hardware.

Can second this - GPU ordering is totally wack in this miner.  GPU-Z, Afterburner, etc seem to show the GPUs in a totally different order.

True, one can always see temps in the miner and try to match them in gpu-z to see "what's what".

I can add to this that claymore miner isn't internally consistent. Order of GPUs shown in mining stats messages doesn't match order of GPUs shown in temperature stats messages. Not the end of the world, but it can be confusing.

In Claymore miner order of GPU is like in every miner cgminer, sgminer, ethminer, etc ..., GPU utilities show different order.

sr. member
Activity: 406
Merit: 250
www.cryptocompare.com
well, if i have GPU 1,2,3 in GPU-Z at 60,61,62. i can check temps* on the claymore miner and it will be something like 62, 60, 61. so I know that gpu 1 in claymore = gpu 3 in gpu-z. gpu 2 in claymore = gpu 1 in gpu-z and gpu 3 in claymore =gpu 2 in gpu-z.

ofcourse this in annoying. but it's a small thing and i think that more important updates are coming. but if mr. claymore could fix this it would be, as always, highly appreceated Smiley


ON ANOTHER NOTE: Payouts in dwarfpool are kind of irregular wil using this command fix it: -esm 0? i'm not using it. just wanted to check before restarting miner with this config. thx Smiley
legendary
Activity: 2688
Merit: 1030
Yes I am a pirate, 300 years too late!

I get about 20-30% rejected shares at suprnova diff 8.  At diff 64 it takes too much time between shares.
Diff 16 and 32 would be lovely.



At zpool i got around 5-10% rejects.



Reason ur rejects on suprnova are so high is diff 8 port is getwork not stratum, use the ccminer stratum port unfortunately it is diff 1 but it doesnt really matter and rejects will go much lower 1-2% total. I had 25% reject on suprnova prior to doing the above.

Same here.  Much better now.
hero member
Activity: 799
Merit: 1000

I get about 20-30% rejected shares at suprnova diff 8.  At diff 64 it takes too much time between shares.
Diff 16 and 32 would be lovely.



At zpool i got around 5-10% rejects.



Reason ur rejects on suprnova are so high is diff 8 port is getwork not stratum, use the ccminer stratum port unfortunately it is diff 1 but it doesnt really matter and rejects will go much lower 1-2% total. I had 25% reject on suprnova prior to doing the above.
legendary
Activity: 1564
Merit: 1027

I get about 20-30% rejected shares at suprnova diff 8.  At diff 64 it takes too much time between shares.
Diff 16 and 32 would be lovely.



At zpool i got around 5-10% rejects.



Use suprnova stratum. Less than 1% rejects  Grin
donator
Activity: 1610
Merit: 1325
Miners developer
Another feature that i'd like to suggest is a way to for us to identify which card on a rig relates to the GPU number.  The only way I can think of doing this would be, for example, if you hit CTRL+0, then it will adjust GPU#0's FAN to 100% while adjusting all other GPU fans on that rig to 5% for 15 seconds, that way we can know that GPU0 will be the card on the rig thats running the fans at full speed.  This would be a huge help with troubleshooting hardware.

Can second this - GPU ordering is totally wack in this miner.  GPU-Z, Afterburner, etc seem to show the GPUs in a totally different order.

True, one can always see temps in the miner and try to match them in gpu-z to see "what's what".

I can add to this that claymore miner isn't internally consistent. Order of GPUs shown in mining stats messages doesn't match order of GPUs shown in temperature stats messages. Not the end of the world, but it can be confusing.

Yes I got some feedbacks about it though I cannot reproduce it on my test rigs for now. The reason is simple: in miner I have to enumerate GPUs via OpenCL API to execute OpenCL code, and I have to enumerate them via ADL API to manage temperature/clock. And order of GPUs in these lists can be different. Such behaiour is senseless for me, but AMD developers always think in a different way. Right now I have no idea how to find same cards in both lists to syncrhonize them.
sr. member
Activity: 419
Merit: 250
Another feature that i'd like to suggest is a way to for us to identify which card on a rig relates to the GPU number.  The only way I can think of doing this would be, for example, if you hit CTRL+0, then it will adjust GPU#0's FAN to 100% while adjusting all other GPU fans on that rig to 5% for 15 seconds, that way we can know that GPU0 will be the card on the rig thats running the fans at full speed.  This would be a huge help with troubleshooting hardware.

Can second this - GPU ordering is totally wack in this miner.  GPU-Z, Afterburner, etc seem to show the GPUs in a totally different order.

True, one can always see temps in the miner and try to match them in gpu-z to see "what's what".

I can add to this that claymore miner isn't internally consistent. Order of GPUs shown in mining stats messages doesn't match order of GPUs shown in temperature stats messages. Not the end of the world, but it can be confusing.
legendary
Activity: 1316
Merit: 1021
2009 Alea iacta est
yr commands in your .bat file?

more details....
hero member
Activity: 742
Merit: 505

I get about 20-30% rejected shares at suprnova diff 8.  At diff 64 it takes too much time between shares.
Diff 16 and 32 would be lovely.



At zpool i got around 5-10% rejects.

sr. member
Activity: 406
Merit: 250
www.cryptocompare.com
Code:
I am new to mining.
I have been running ethOS on a couple machines (http://539eaf.ethosdistro.com/#), so I have been able to muddle my way through beginners Linux. (once I found out nano was the text editor  ::) )

I have an SSD with Windows 10 on the way and I am hoping to be prepared to make the change when it arrives later this week. I think I am close  ??? and 2 weeks from now (when I switch my other rig) this will be easy.


So from here - https://drive.google.com/open?id=0B69wv2iqszefdFZUV2toUG5HdlU
I download this - Claymore's Dual Ethereum+Decred AMD GPU Miner v3.2 Beta - POOL Catalyst 15.12.zip
unzip that, then -

I need a quick primer on using Command Prompt
How do I edit a file?
What file do I edit?
Looks like this right?

runme.bat
EthDcrMiner64.exe -epool us1.ethermine.org:4444 -esm 1 -ewal 0x073572819f00d3c6bbad77e6a8f247303414e4ed -epsw x -dpool -eworker Abcedarian.JG1221 -epsw x stratum+tcp://stratum+tcp://dcr.suprnova.cc:2252 -dwal TsdUrZVC36SrWP6hudytm7jxkrP3WEWW8b1 -dpsw x --tt85 -dcri 20 -r 0

Then I am ready to start?


I am getting this error at Supernova.pool Huh

-  Failed to update your account: Invalid coin address

The address is from- https://wallet.decred.org/#/
Am I supposed to mine to something other than my decred wallet?

Any help would greatly be appreciated.
 


i've had the same problem. you cant use the webwallet because it creates a TEMPORARY adress for recieving payments. download the decred wallet and make your own wallet then add it to the pool. you can also use a wallet from bittrex, which i would not reccomend for safety.

here's an easy guide to setting your decred wallet up!

https://forum.decred.org/threads/brief-guide-setting-up-mainnet-wallet-airdop-included-with-basic-commands-os-neutral.478/

you will also be able to stake your mined decred! Smiley


also this can help u

Windows Guide :
On Windows, you need to execute each command with a different BAT file. There’s no way, for the moment, to use any kind of terminal.

First of all, you’ll need to download the latest binaries available at : https://github.com/decred/dcrd/releases

This zip file  include all the Windows Instructions for an easy setup.
http://thecryptoworld.org/decred-get-started

This file include :
How to setup your server (dcrd)
How to create your wallet (dcrwallet)
How to connect with your wallet
How to get your decred wallet address
How to start Proof-Of-Stake by buying tickets
How to unlock your wallet

Cool! thx, i'm still struggling with the pos part. will be reading this.
legendary
Activity: 1316
Merit: 1021
2009 Alea iacta est
Code:
I am new to mining.
I have been running ethOS on a couple machines (http://539eaf.ethosdistro.com/#), so I have been able to muddle my way through beginners Linux. (once I found out nano was the text editor  ::) )

I have an SSD with Windows 10 on the way and I am hoping to be prepared to make the change when it arrives later this week. I think I am close  ??? and 2 weeks from now (when I switch my other rig) this will be easy.


So from here - https://drive.google.com/open?id=0B69wv2iqszefdFZUV2toUG5HdlU
I download this - Claymore's Dual Ethereum+Decred AMD GPU Miner v3.2 Beta - POOL Catalyst 15.12.zip
unzip that, then -

I need a quick primer on using Command Prompt
How do I edit a file?
What file do I edit?
Looks like this right?

runme.bat
EthDcrMiner64.exe -epool us1.ethermine.org:4444 -esm 1 -ewal 0x073572819f00d3c6bbad77e6a8f247303414e4ed -epsw x -dpool -eworker Abcedarian.JG1221 -epsw x stratum+tcp://stratum+tcp://dcr.suprnova.cc:2252 -dwal TsdUrZVC36SrWP6hudytm7jxkrP3WEWW8b1 -dpsw x --tt85 -dcri 20 -r 0

Then I am ready to start?


I am getting this error at Supernova.pool Huh

-  Failed to update your account: Invalid coin address

The address is from- https://wallet.decred.org/#/
Am I supposed to mine to something other than my decred wallet?

Any help would greatly be appreciated.
 


i've had the same problem. you cant use the webwallet because it creates a TEMPORARY adress for recieving payments. download the decred wallet and make your own wallet then add it to the pool. you can also use a wallet from bittrex, which i would not reccomend for safety.

here's an easy guide to setting your decred wallet up!

https://forum.decred.org/threads/brief-guide-setting-up-mainnet-wallet-airdop-included-with-basic-commands-os-neutral.478/

you will also be able to stake your mined decred! Smiley


also this can help u

Windows Guide :
On Windows, you need to execute each command with a different BAT file. There’s no way, for the moment, to use any kind of terminal.

First of all, you’ll need to download the latest binaries available at : https://github.com/decred/dcrd/releases

This zip file  include all the Windows Instructions for an easy setup.
http://thecryptoworld.org/decred-get-started

This file include :
How to setup your server (dcrd)
How to create your wallet (dcrwallet)
How to connect with your wallet
How to get your decred wallet address
How to start Proof-Of-Stake by buying tickets
How to unlock your wallet
sr. member
Activity: 406
Merit: 250
www.cryptocompare.com
Code:
I am new to mining.
I have been running ethOS on a couple machines (http://539eaf.ethosdistro.com/#), so I have been able to muddle my way through beginners Linux. (once I found out nano was the text editor  ::) )

I have an SSD with Windows 10 on the way and I am hoping to be prepared to make the change when it arrives later this week. I think I am close  ??? and 2 weeks from now (when I switch my other rig) this will be easy.


So from here - https://drive.google.com/open?id=0B69wv2iqszefdFZUV2toUG5HdlU
I download this - Claymore's Dual Ethereum+Decred AMD GPU Miner v3.2 Beta - POOL Catalyst 15.12.zip
unzip that, then -

I need a quick primer on using Command Prompt
How do I edit a file?
What file do I edit?
Looks like this right?

runme.bat
EthDcrMiner64.exe -epool us1.ethermine.org:4444 -esm 1 -ewal 0x073572819f00d3c6bbad77e6a8f247303414e4ed -epsw x -dpool -eworker Abcedarian.JG1221 -epsw x stratum+tcp://stratum+tcp://dcr.suprnova.cc:2252 -dwal TsdUrZVC36SrWP6hudytm7jxkrP3WEWW8b1 -dpsw x --tt85 -dcri 20 -r 0

Then I am ready to start?


I am getting this error at Supernova.pool Huh

-  Failed to update your account: Invalid coin address

The address is from- https://wallet.decred.org/#/
Am I supposed to mine to something other than my decred wallet?

Any help would greatly be appreciated.
 


i've had the same problem. you cant use the webwallet because it creates a TEMPORARY adress for recieving payments. download the decred wallet and make your own wallet then add it to the pool. you can also use a wallet from bittrex, which i would not reccomend for safety.

here's an easy guide to setting your decred wallet up!

https://forum.decred.org/threads/brief-guide-setting-up-mainnet-wallet-airdop-included-with-basic-commands-os-neutral.478/

you will also be able to stake your mined decred! Smiley
Jump to: