Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1380. (Read 6590718 times)

Have you made any observation on the watt draw difference or heat difference that heavy of an undervolt?  My 390s are hogs - like 270W ...

Hi, Claymore! Thx for good work.
I have a card 7970m (Pitcairn) and I can't use it. Your miner says "GPU 0, GpuMiner k1 failed -48" and reboots own start. Howevever genoil miner successfully works and shows 15MHs. Could You explain this problem?

Are you sure this is the name of your worker?

Follow the instructions on the OP:

"-epsw    Password for Ethereum pool, use "x" as password."

Verifique o nome dos seus "workers" e a sua palavra passe. Tem a certeza que a palavra passe é "PC-14"?

Boa sorte! 

thx 

Hi,

At Coinotron with this .bat file don't work:

timeout /t 15

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool coinotron.com:3344 -ewal almartins.PC-14 -esm 0 -epsw PC-14 -allpools 1

CMD windows is like thist:

C:\Claymore's Dual Ethereum+Decred AMD GPU Miner v1.2 Beta - POOL Catalyst 15.12
\Claymore's Dual Ethereum+Decred AMD GPU Miner v1.2 Beta - POOL>setx GPU_FORCE_6
4BIT_PTR 0

ÊXITO: o valor especificado foi guardado.

C:\Claymore's Dual Ethereum+Decred AMD GPU Miner v1.2 Beta - POOL Catalyst 15.12
\Claymore's Dual Ethereum+Decred AMD GPU Miner v1.2 Beta - POOL>setx GPU_MAX_HEA
P_SIZE 100

ÊXITO: o valor especificado foi guardado.

C:\Claymore's Dual Ethereum+Decred AMD GPU Miner v1.2 Beta - POOL Catalyst 15.12
\Claymore's Dual Ethereum+Decred AMD GPU Miner v1.2 Beta - POOL>setx GPU_USE_SYN
C_OBJECTS 1

ÊXITO: o valor especificado foi guardado.

C:\Claymore's Dual Ethereum+Decred AMD GPU Miner v1.2 Beta - POOL Catalyst 15.12
\Claymore's Dual Ethereum+Decred AMD GPU Miner v1.2 Beta - POOL>setx GPU_SINGLE_
ALLOC_PERCENT 100

ÊXITO: o valor especificado foi guardado.

C:\Claymore's Dual Ethereum+Decred AMD GPU Miner v1.2 Beta - POOL Catalyst 15.12
\Claymore's Dual Ethereum+Decred AMD GPU Miner v1.2 Beta - POOL>EthDcrMiner64.ex
e -epool coinotron.com:3344 -ewal almartins.PC-14 -esm 0 -epsw PC-14 -allpools 1


╔════════════════════════════════════════════════════════════════╗
║   Claymore's Dual Ethereum + Decred AMD GPU Miner  v1.2 Beta   ║
╚════════════════════════════════════════════════════════════════╝

Cards available: 4
GPU #0: name: Tahiti, 3072 MB available, 28 units
GPU #1: name: Tahiti, 3072 MB available, 28 units
GPU #2: name: Tahiti, 3072 MB available, 28 units
GPU #3: name: Tahiti, 3072 MB available, 28 units
Total cards: 4

Catalyst 15.12 is REQUIRED for best performance and compatibility
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Initializing...

POOL version
No pool specified for Decred! Ethereum-only mining mode is enabled
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: eth-proxy stratum mode

ETH: Stratum - connecting to 'coinotron.com' <178.217.186.125> port 3344
ETH: Stratum - Connected
Auth failed
: {"id":0,"result":null,"error":[-32600,"InvalidRequest",null]}
Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'coinotron.com' <178.217.186.125> port 3344
ETH: Stratum - Connected
Auth failed
: {"id":0,"result":null,"error":[-32600,"InvalidRequest",null]}
Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'coinotron.com' <178.217.186.125> port 3344
ETH: Stratum - Connected
Auth failed
: {"id":0,"result":null,"error":[-32600,"InvalidRequest",null]}
Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'coinotron.com' <178.217.186.125> port 3344
ETH: Stratum - Connected
Auth failed
: {"id":0,"result":null,"error":[-32600,"InvalidRequest",null]}
Job timeout, disconnect, retry in 20 sec...

What are your oppinion ?

Regards

Probably there is one more text line after that line in red, it contains something like "Wrongworkernameorpassword".

with your coinotron example I only get "Authorisation failed" - no mining possible.

Awesome work!

Up from 66.5 mh/s to 70mh/s with 1 x 7970 and 2 x 7950 single mining Eth.

Just about to test it on my two 290x

EDIT: 290x have gone from 59mh/s overclocked to 59mh/s not overclocked.   This is all just miner reported hash rates at the moment, but early indications show far more accepted shares.

Hello.
What is the problem?
The test rig 3 x r380x
1100 - core, memory - 1500
Hash rate high 64,7 MHs in miner, it does not send the shares. In 1 hour 40 sent the shares
Default settings.
Need help please.
P/S
Mode - -mode 1
Pool - ethpool.org

Nice work. With v3.0 i have 100% eth hashrate + 33% dcr hashrate per card and near 0%/2% rejects respectively.
Are there any plans to add vcash (Blake algo) mining in dual mode?

I use Sapphire Trixx to downclock my memory to 150 Mhz which also increases hashrate due to tighter timings.

Well, one of my 270x has always been running at 15,4 but it's a Sapphire Toxic, therefore not exactly a standard 270x.

The other ones, the Sapphire Dual-X, are only running at 13.2 MHs~13.9MHs no matter what miner I use.

I experienced the same problem once I swapped cards from another rig despite using DDU and reinstalling drivers but managed to resolve it by invoking the -di option.  As an example, I've reordered my GPUs correctly with the following command: -di 102.



15.7.1 delivers the highest performance for a wide variety of algorithms on my 290, 290x & 390x and has also proven to be the most stable meanwhile offering the highest overlcocking potential and does not introduce any screen artifacts.

Finally got sick of ehhminer constanly dying and crashing my miners on the regular and tried this miner out and wow !

Im in love , now getting 180mhs for my six 390 card rig that i was testing for a while thats with an undervolt of 100mv

cards are running about 5 degrees hotter but each card hashes at 30mhs no lower.

Also it seems this miner is smarter if one card dies the miner does not hang it just keeps mining with the other 5 cards

this is good so now i can play around more with undervolted bioes going forward etc.

-two things
1)
All i need now is a way to use it with the solo mining proxy
https://forum.ethereum.org/discussion/3513/ethereum-mining-proxy/p1

2)
do your commands for lowering memory clock really work ? in MSI afterburner yo ucant really lower the memory clock . i mean it lets you but
the clocks do not go lower when you apply the settings.    For ethreum we can get better power usesage and temps if we can lower the mem clock
and a leave the core alone at least for newer AMD cards.

Sorry, working while trying to add third card, took me a while to get back.
Nothing special at all, only the switch to run 3 cards.
All box stock

The MSI R9 270X 4 gb running 14.605 ~ 14.610 each
The old MSI HD 7850 2 gb running 12.590~12.602

Man I wish I'd never sold the other three MSI HD 7850's, just had single 6 pin and seem to do oK mining ETH.
Running out of connectors to run these newer cards each two six pins.
Also, don't remember having to connect the risers to power....there goes another spot on the PSU.
BTW, PSU is Seasonic 850W Gold


@gagana - when the miner boots it identifies GPU "0" in the beggining...next software start look for it.

Yep, here its +3-4C for the gpu and 6-7 for the VRM's when dual mining

Sehr gut!

Video cards a little more heated. So working as it should. Thank you for your release. 

-di    GPU indexes, default is all available GPUs. For example, if you have four GPUs "-di 02" will enable only first and third GPUs (#0 and #2).

Use -di 0 and see which card is loaded, then use -di 01 and see what the new card has become loaded , etc.

Nvidia - no. Failover - yes, in next release.

and failover ?