Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 164.

hascoin

full member

Activity: 178

Merit: 100

Quote

NVIDIA Cards available: 1
CUDA Driver Version/Runtime Version: 10.0/8.0
GPU #0: GeForce GTX 1050 Ti, 4096 MB available, 6 compute units, capability: 6.1 (pci bus 4:0:0)
Total cards: 1
ETH - connecting to 127.0.0.1:8545
No pool specified for Decred! Ethereum-only mining mode is enabled
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: HTTP SOLO mode
Ethereum HTTP requests time (-etht) is set to 200 ms
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

ETH: http error #7.
ETH: Failed to connect to pool (127.0.0.1:8545), retry in 20 sec...

Help help me please.

I met this error when I mine in a new coin forked on Ethreum.

How to deal with ？

l30z1n

newbie

Activity: 46

Merit: 0

What is the forecast for 4GB cards to stop working? At least another 12 months?

sxemini

member

Activity: 1558

Merit: 69

Quote from: thameur on January 16, 2019, 09:04:14 AM

hi

is there any news for hashrate drop for R9 390 8g, is not yet set as RX 580, DAG file eat my hashrate Cry

from 33 Mh/s to 25 !!!

There give no news, DAG problem, mine a coin with lower DAG. This problem will never fix and it is very old shit. I write this 1 or 2 times a week and every day the same question.

Read this from phönixminer:

Quote from: PhoenixMiner on January 18, 2019, 08:32:28 AM

Quote from: thameur on January 15, 2019, 10:42:34 AM

Hi

have there real problems, when mines with R9 390 u. R9 390X GPU's .....
For some months, the hashrate is decreasing continuously from formerly about 33 Mhs / s to about 25.9 Mhs / s even though the R9 390 (X) of the DAG Epoch problem should not be affected at all ...
have any idea to get back 33 Mh/s
Resiste the DAG Epoch

This is caused by the size of the TLB, which is too small for the current DAG sizes and causes constant eviction from the TLB cache. AMD released the "compute mode" fix for RX4x0 and RX5x0 cards, which simply increased the memory page size. However there is no such fix for 290/390 cards. Probably there is no way to increase the page size on these cards because of hardware limitations but only AMD knows for sure. You can either mine coins with lower DAG (basically everything except ETH and ETC), or accept the hashrate drop (but it will get gradually worse over time).

sernos

newbie

Activity: 2

Merit: 0

Hi!
I also have more than 10 pieces R9 390 8g and have a problem with hashrate mining ETH

thameur

newbie

Activity: 30

Merit: 0

hi

is there any news for hashrate drop for R9 390 8g, is not yet set as RX 580, DAG file eat my hashrate Cry

from 33 Mh/s to 25 !!!

arielbit

legendary

Activity: 3444

Merit: 1061

Quote from: Claymore on January 05, 2019, 04:16:45 AM

Yes I will update my miner to support ProgPow when ETH will be ready to switch to it.

make grin miner too

claymore! claymore! claymore! ..hehe just like the old days Grin

hagbase

sr. member

Activity: 433

Merit: 254

Quote from: Jearz on January 14, 2019, 10:07:31 AM

Hi

Since a few months I noticed a drop of hashrate on the card of my rigs under Ethos. Previously between 28 and 30mhs on my RX, now no more than 24, even updating Claymore ... Same problem on all my rigs, I wonder if it is normal due to the increase the DAG or not?
Thank you

No, check your settings and update ethOS / miner software.

Jearz

newbie

Activity: 1

Merit: 0

Hi

Since a few months I noticed a drop of hashrate on the card of my rigs under Ethos. Previously between 28 and 30mhs on my RX, now no more than 24, even updating Claymore ... Same problem on all my rigs, I wonder if it is normal due to the increase the DAG or not?
Thank you

sad85man

newbie

Activity: 2

Merit: 0

Quote from: Privatoria on August 15, 2018, 06:16:16 PM

As I read in the news, there will be new update of Ethereum in few months related to Constantinople hard fork. Dear Claymore! I think that you have to update your program to be ready for it.

Is that really needed or not please help!

carlo_0000

legendary

Activity: 1281

Merit: 1003

Quote from: Birgit1208 on January 11, 2019, 12:31:36 PM

Hallo and nice greetings to the forum,

have there real problems, when mines with R9 390 u. R9 390X GPU's .....

For some months, the hashrate is decreasing continuously from formerly about 31 Mhs / s to about 25 Mhs / s even though the R9 390 (X) of the DAG Epoch problem should not be affected at all ....

Problem occurs both under Win 7 64 bit and under Win 10 64 bit (1709) ...

Geth is up to date ...

Claymore Miner is the version 12.0 ...

AMD driver is currently 18.12.3 on it, runs stable but only with 25 Mhs / s .... have already tried the 15.12, the blockchain driver and a few other drivers ... all with exactly the same result .... 25-26 Mhs / s

Have the drivers under Wattman already reset and already thrown down the Afterburner ... but always the same result ....

Gpu's run in a mix with Nvidia 1070 and / or RX 580 ..... Nvidia 1070 run stable at about 31 Mhs / .... RX 580 run stable at about 30 Mhs / s ....

Have no idea what I could do .... The gpu's have it on it, have been running for a long time with 31 Mhs / s ... is probably more of a setting thing ...

Would be grateful for any help...

LG Birgit1208

same i only have 1 x 390 and it s around 25mh when before it had same speed as my 470's, and i guess it use lot more power

big_daddy

hero member

Activity: 1680

Merit: 583

xUSD - The PRIVATE stable coin - Haven Protocol

Quote from: xunl on January 12, 2019, 11:41:09 AM

Hi,

4 days away from the next major upgrade in ethereum and hard fork. anything claymore miners need to do? or we can just continue mining like in the past?

Thanks

the costantinopole upgrade on ethereum will have no affect on mining, only will be reduced the block reward from 3 eth to 2 eth per mined block, but the algo is the same

xunl

newbie

Activity: 33

Merit: 0

Hi,

4 days away from the next major upgrade in ethereum and hard fork. anything claymore miners need to do? or we can just continue mining like in the past?

Thanks

Birgit1208

newbie

Activity: 1

Merit: 0

Hallo and nice greetings to the forum,

have there real problems, when mines with R9 390 u. R9 390X GPU's .....

For some months, the hashrate is decreasing continuously from formerly about 31 Mhs / s to about 25 Mhs / s even though the R9 390 (X) of the DAG Epoch problem should not be affected at all ....

Problem occurs both under Win 7 64 bit and under Win 10 64 bit (1709) ...

Geth is up to date ...

Claymore Miner is the version 12.0 ...

AMD driver is currently 18.12.3 on it, runs stable but only with 25 Mhs / s .... have already tried the 15.12, the blockchain driver and a few other drivers ... all with exactly the same result .... 25-26 Mhs / s

Have the drivers under Wattman already reset and already thrown down the Afterburner ... but always the same result ....

Gpu's run in a mix with Nvidia 1070 and / or RX 580 ..... Nvidia 1070 run stable at about 31 Mhs / .... RX 580 run stable at about 30 Mhs / s ....

Have no idea what I could do .... The gpu's have it on it, have been running for a long time with 31 Mhs / s ... is probably more of a setting thing ...

Would be grateful for any help...

LG Birgit1208

Stoukie

jr. member

Activity: 30

Merit: 1

Quote from: miau_365 on January 10, 2019, 03:22:39 PM

Guys, simple question:
Is this still working on v 11.9?
Since 1 month ago aprox (when the anually amd drivers were released -adrenaline 2019) my miner doesn't work, it closes suddenly when I open the console
My PC:
amd rx radeon 580 with 18.12.2 (adrenalin 2019)
windows 10

should I uninstall the latest drivers from amd or update the miner? or install the last 18.12.3 driver from amd?
thank you for your opinions

Version 11.9 still works 100%, see the first page for the list of changes / improvements.

Could also be a Windows Update or Windows Defender blocking the miner from running, first try to add the mining folder to the Windows Defender exclusion list, see Google for guide.

If that does not do anything try to upgrade the adrenalin drivers, if that does not work uninstall and install the old Blockchain drivers (see Google).

See if any of the above work, good luck.

ildotoress

newbie

Activity: 77

Merit: 0

Quote from: zarapp on January 10, 2019, 12:07:22 PM

Quote from: laineux on January 08, 2019, 04:19:23 AM

I can't find answers about constantinople ETH fork which will occur on 15 jan.
And nothing is announced in first page of this topic.

Is this Claymore's soft ready ?

Who told you that ProgPOW will be on 15 jan ? Next meeting is on 18 and then they will discuss when to switch ...

Constantinople will be in the interval 16-18 January.
ProgPow has nothing to do with that.

miau_365

newbie

Activity: 2

Merit: 0

Guys, simple question:
Is this still working on v 11.9?
Since 1 month ago aprox (when the anually amd drivers were released -adrenaline 2019) my miner doesn't work, it closes suddenly when I open the console
My PC:
amd rx radeon 580 with 18.12.2 (adrenalin 2019)
windows 10

should I uninstall the latest drivers from amd or update the miner? or install the last 18.12.3 driver from amd?
thank you for your opinions

zarapp

newbie

Activity: 12

Merit: 0

Quote from: laineux on January 08, 2019, 04:19:23 AM

I can't find answers about constantinople ETH fork which will occur on 15 jan.
And nothing is announced in first page of this topic.

Is this Claymore's soft ready ?

Who told you that ProgPOW will be on 15 jan ? Next meeting is on 18 and then they will discuss when to switch ...

br2459

full member

Activity: 269

Merit: 102

Quote from: Mvuckovic on January 10, 2019, 01:38:59 AM

Quote from: Intristing on January 09, 2019, 09:34:48 PM

Quote from: Mvuckovic on January 09, 2019, 08:25:14 PM

Help!!!

After turning on comp.and start mining, mining stop and shop up text

Application has been blocked from accessing Graphics hardware.
Application EthDcrMiner64, has been blocked from accessing Graphics hardware

What is the type of graphics card and operating system?

Win 10.
580 rx amd

Disable Windows Defender. It's responsible for blocking access to the GPU.

bategojko74

member

Activity: 220

Merit: 12

Quote from: sxemini on January 10, 2019, 05:32:43 AM

Quote from: br2459 on January 09, 2019, 09:25:31 AM

Quote from: sxemini on January 09, 2019, 07:20:00 AM

Quote from: bruce81 on January 08, 2019, 12:08:50 PM

Nvidia 3 Gb are there solutions with DAG ?

Mining other coins with lower DAG, there is no other solution.

Quote from: br2459 on January 08, 2019, 02:26:08 PM

Quote from: bruce81 on January 08, 2019, 12:08:50 PM

Nvidia 3 Gb are there solutions with DAG ?

Use Windows 7 and it will work. I have an EVGA 1060 3GB running on Windows 7 just fine with version 12.0. With Windows 10 the system utilizes 20% of the memory and the DAG won't load because of that. In Windows 7 that is not an issue.

And how long? 1 or 2 month? and 20% system utilizes is wrong, this would be around 600mb.
Sorry mine other coins with this cards is the only right solution.

On AMD RX470/480/570/580 PM is a little bit faster than on NVidia. It also consumes two Watts less than Claymore on AMD RX470/480/570/580. On NVidia it consumes the same. No need to mention the PM's lowest dev fee.

From the dag calculator (https://investoon.com/tools/dag_size) you can use 3GB cards for approx another 4 months.

As for the 20% check out this post about it (https://social.technet.microsoft.com/Forums/ie/en-US/15b9654e-5da7-45b7-93de-e8b63faef064/windows-10-does-not-let-cuda-applications-to-use-all-vram-on-especially-secondary-graphics-cards?forum=win10itprohardware). Windows 10 "reserves" part of the VRAM and doesn't allow other applications to use it. This isn't an issue with rigs that have 4GB and larger currently, but 4GB will see there end in 2021 according to the DAG calculator.

And yes you of course can mine something else but those dead set on ETH there is a way for now.

Why i must check a post? I check my rigs and see that windows 10 don´t use 20% from vram XD, it will to be around 10% and when you use the igpu from cpu, it will be even less.
And Win7 always reserve some vram too. So i think in around 2 month eth mining will end for 3gb cards.

Sorry you read to much and check nothing by your self. I don´t trust calculators, i try it out and make my own opinion.

Quote from: RivAngE on January 10, 2019, 05:10:50 AM

Has anyone compared the v12 with Phoenix Miner in Nvidia cards?
Right now I'm getting an average of 49.0 - 49.5 MH/s with Phoenix on EVGA 1080ti FTW3 @74% efficiency.

Phönixminer is much faster on nvidia cards.

PM is a little bit faster on AMD RX470/480/570/580 than on Nvidia. It also consumes 2 Watts less per card than Claymore on AMD RX470/480/570/580 compared to Nvidia where it consumes the same. No need to mention the PM's lowest devfee.

sxemini

member

Activity: 1558

Merit: 69

Quote from: br2459 on January 09, 2019, 09:25:31 AM

Quote from: sxemini on January 09, 2019, 07:20:00 AM

Quote from: bruce81 on January 08, 2019, 12:08:50 PM

Nvidia 3 Gb are there solutions with DAG ?

Mining other coins with lower DAG, there is no other solution.

Quote from: br2459 on January 08, 2019, 02:26:08 PM

Quote from: bruce81 on January 08, 2019, 12:08:50 PM

Nvidia 3 Gb are there solutions with DAG ?

Use Windows 7 and it will work. I have an EVGA 1060 3GB running on Windows 7 just fine with version 12.0. With Windows 10 the system utilizes 20% of the memory and the DAG won't load because of that. In Windows 7 that is not an issue.

And how long? 1 or 2 month? and 20% system utilizes is wrong, this would be around 600mb.
Sorry mine other coins with this cards is the only right solution.

From the dag calculator (https://investoon.com/tools/dag_size) you can use 3GB cards for approx another 4 months.

As for the 20% check out this post about it (https://social.technet.microsoft.com/Forums/ie/en-US/15b9654e-5da7-45b7-93de-e8b63faef064/windows-10-does-not-let-cuda-applications-to-use-all-vram-on-especially-secondary-graphics-cards?forum=win10itprohardware). Windows 10 "reserves" part of the VRAM and doesn't allow other applications to use it. This isn't an issue with rigs that have 4GB and larger currently, but 4GB will see there end in 2021 according to the DAG calculator.

And yes you of course can mine something else but those dead set on ETH there is a way for now.

Why i must check a post? I check my rigs and see that windows 10 don´t use 20% from vram XD, it will to be around 10% and when you use the igpu from cpu, it will be even less.
And Win7 always reserve some vram too. So i think in around 2 month eth mining will end for 3gb cards.

Sorry you read to much and check nothing by your self. I don´t trust calculators, i try it out and make my own opinion.

Quote from: RivAngE on January 10, 2019, 05:10:50 AM

Has anyone compared the v12 with Phoenix Miner in Nvidia cards?
Right now I'm getting an average of 49.0 - 49.5 MH/s with Phoenix on EVGA 1080ti FTW3 @74% efficiency.

Phönixminer is much faster on nvidia cards.

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 164. (Read 6590718 times)