Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 202. (Read 6590718 times)

it shouldn't take 4 days man... the pool should start reflecting your hashrate within 5-10 mins.

My miner didn't work for 4 days. How long should I wait until my nanopool chart shows my reported hashrate? Because it doesn't show anything

Good. I would read through the cclock instructions and get your head around those. Get your GPU order and list out the relevant cclock,mclock you want to run for each card and see if you can get them running as per the overclocks you want.

It started mining, I deleted cclock and mclock

"About your pc" from the start menu

Going to try without the cclock, mclock.

Where can I see what version of windows 10 is?

What happens if you run without the cclock, mclock arguments? I haven't run those with AMD and Nvidia cards with a single setting. I usually set each card specifically, e.g. -cclock 1050,1050,1000,...

Also, what version windows 10? 1803, 1709?

Hello, I have Windows 10 pro.

For AMD I have Win10-64 Bit Crimson Relive Beta BlockChain Wordloads. DDU v17.0.7.9. Display Driver.

This is what I have on my BAT file.

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eth-us-west1.nanopool.org:9999 -ewal 0xdadadhasdada.Lee/[email protected] -epsw x -ftime 10 -mode 1 -tt 70 -fanmax 100 -fanmin 70 -cclock 1050 -mclock 1650 -cvddc 1000 -mvddc 1000

First time that I ran claymore, appeared this:

21:37:07:956   1014   Check and remove old log files...
21:37:07:972   1014   args: -epool eth-us-west1.nanopool.org:9999 -ewal 0xf1b0620972ce2609a4659f9d78fef7ea3d1a2a7e.Lee/[email protected] -epsw x -ftime 10 -mode 1 -tt 70 -fanmax 100 -fanmin 70 -cclock 1050 -mclock 1350 -cvddc 1000 -mvddc 1000
21:37:07:972   1014   
21:37:07:972   1014   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
21:37:07:987   1014   º                Claymore's Dual GPU Miner - v11.8               º
21:37:07:987   1014   º              ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK             º
21:37:08:003   1014   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
21:37:08:018   1014   
21:37:08:018   1014   b591
21:37:08:237   1014   ETH: 5 pools are specified
21:37:08:237   1014   Main Ethereum pool is eth-us-west1.nanopool.org:9999
21:37:09:081   1014   OpenCL platform: NVIDIA CUDA
21:37:09:096   1014   OpenCL platform: AMD Accelerated Parallel Processing
21:37:09:096   1014   OpenCL initializing...

21:37:09:096   1014   AMD Cards available: 2
21:37:09:096   1014   GPU #0: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 3:0:0)
21:37:09:096   1014   GPU #0 recognized as Radeon RX 470/570
21:37:09:112   1014   GPU #1: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 5:0:0)
21:37:09:112   1014   GPU #1 recognized as Radeon RX 470/570
21:37:09:112   1014   POOL/SOLO version
21:37:09:112   1014   Platform: Windows
21:37:09:534   1014   start building OpenCL program for GPU 0...
21:37:10:471   1014   done
21:37:10:706   1014   start building OpenCL program for GPU 1...
21:37:11:081   1014   done
21:37:11:440   1014   GPU #0: algorithm ASM 1
21:37:11:596   1014   GPU #1: algorithm ASM 1
21:37:12:018   1014   CUDA initializing...

21:37:12:018   1014   NVIDIA Cards available: 3
21:37:12:018   1014   CUDA Driver Version/Runtime Version: 9.1/8.0
21:37:12:034   1014   GPU #2: GeForce GTX 1060 6GB, 6144 MB available, 10 compute units, capability: 6.1  (pci bus 1:0:0)
21:37:12:034   1014   GPU #3: GeForce GTX 1060 6GB, 6144 MB available, 10 compute units, capability: 6.1  (pci bus 2:0:0)
21:37:12:034   1014   GPU #4: GeForce GTX 1060 6GB, 6144 MB available, 10 compute units, capability: 6.1  (pci bus 4:0:0)
21:37:12:049   1014   Total cards: 5
21:37:13:284   1014   
You can use "+" and "-" keys to achieve best ETH speed, see "FINE TUNING" section in Readme for details.

21:37:14:315   1014   NVML version: 9.391.01
21:37:14:752   1014   gpu 2 nvidia setcoreclock set ok (1508MHz, previous value was 1708MHz)
21:37:14:799   1014   gpu 2 nvidia memclock set ok (3004MHz, previous value was 4004MHz)
21:37:14:846   1014   gpu 3 nvidia setcoreclock set ok (1559MHz, previous value was 1759MHz)
21:37:14:924   1014   gpu 3 nvidia memclock set ok (3004MHz, previous value was 4004MHz)
21:37:14:971   1014   gpu 4 nvidia setcoreclock set ok (1559MHz, previous value was 1759MHz)
21:37:15:018   1014   gpu 4 nvidia memclock set ok (3004MHz, previous value was 4004MHz)
21:37:38:005   e04   
21:37:38:067   1dc8   GPU 0 temp = 36, old fan speed = 0, new fan speed = 70

21:37:38:223   1dc8   GPU 1 temp = 32, old fan speed = 0, new fan speed = 70

21:37:40:708   1dc8   NVML: cannot get fan speed, error 999 (an internal driver error occurred)


Second time that I ran claymore, appeared this:

21:37:08:003   1014   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
21:37:08:018   1014   
21:37:08:018   1014   b591
21:37:08:237   1014   ETH: 5 pools are specified
21:37:08:237   1014   Main Ethereum pool is eth-us-west1.nanopool.org:9999
21:37:09:081   1014   OpenCL platform: NVIDIA CUDA
21:37:09:096   1014   OpenCL platform: AMD Accelerated Parallel Processing
21:37:09:096   1014   OpenCL initializing...

21:37:09:096   1014   AMD Cards available: 2
21:37:09:096   1014   GPU #0: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 3:0:0)
21:37:09:096   1014   GPU #0 recognized as Radeon RX 470/570
21:37:09:112   1014   GPU #1: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 5:0:0)
21:37:09:112   1014   GPU #1 recognized as Radeon RX 470/570
21:37:09:112   1014   POOL/SOLO version
21:37:09:112   1014   Platform: Windows
21:37:09:534   1014   start building OpenCL program for GPU 0...
21:37:10:471   1014   done
21:37:10:706   1014   start building OpenCL program for GPU 1...
21:37:11:081   1014   done
21:37:11:440   1014   GPU #0: algorithm ASM 1
21:37:11:596   1014   GPU #1: algorithm ASM 1
21:37:12:018   1014   CUDA initializing...

21:37:12:018   1014   NVIDIA Cards available: 3
21:37:12:018   1014   CUDA Driver Version/Runtime Version: 9.1/8.0
21:37:12:034   1014   GPU #2: GeForce GTX 1060 6GB, 6144 MB available, 10 compute units, capability: 6.1  (pci bus 1:0:0)
21:37:12:034   1014   GPU #3: GeForce GTX 1060 6GB, 6144 MB available, 10 compute units, capability: 6.1  (pci bus 2:0:0)
21:37:12:034   1014   GPU #4: GeForce GTX 1060 6GB, 6144 MB available, 10 compute units, capability: 6.1  (pci bus 4:0:0)
21:37:12:049   1014   Total cards: 5
21:37:13:284   1014   

You can use "+" and "-" keys to achieve best ETH speed, see "FINE TUNING" section in Readme for details.

21:37:14:315   1014   NVML version: 9.391.01
21:37:14:752   1014   gpu 2 nvidia setcoreclock set ok (1508MHz, previous value was 1708MHz)
21:37:14:799   1014   gpu 2 nvidia memclock set ok (3004MHz, previous value was 4004MHz)
21:37:14:846   1014   gpu 3 nvidia setcoreclock set ok (1559MHz, previous value was 1759MHz)
21:37:14:924   1014   gpu 3 nvidia memclock set ok (3004MHz, previous value was 4004MHz)
21:37:14:971   1014   gpu 4 nvidia setcoreclock set ok (1559MHz, previous value was 1759MHz)
21:37:15:018   1014   gpu 4 nvidia memclock set ok (3004MHz, previous value was 4004MHz)
21:37:38:005   e04   
21:37:38:067   1dc8   GPU 0 temp = 36, old fan speed = 0, new fan speed = 70

21:37:38:223   1dc8   GPU 1 temp = 32, old fan speed = 0, new fan speed = 70

21:37:40:708   1dc8   NVML: cannot get fan speed, error 999 (an internal driver error occurred)

When the words in RED appeared, my rig got REALLY slow, I had to restart

Which version on Win10? You can see in the posts above the trouble 1803 has.

windows 10,  6 x rx 470, 8 gb

then dont do updates

a lot ways to do it

https://bitcointalksearch.org/topic/stop-windows-10-update-2878646

Win 10 fall creators update has been proven working great

https://bitcointalksearch.org/topic/windows-10-fall-creators-version-2581954

I have had claymore 11.8 with adrenaline 18.5 driver working GREAT. Then, windows accidentally updated. Now i'm getting the same thing where it stops at

ETH: 1 pool is specified
Main Ethereum pool is us1.ethermine.org:4444

and then just sits there until it says miner can't initialize. I've reinstalled  drivers using DDU. turned off windows dfeneder (claymore isn't being shut down, so I don't think that's the problem). In Gpu Z, open CL is indeed not checked, but I thought these graphics cards RX 400 and 500 serious (currently testing on ONLY a single 570 since this is blowing up my brain) used Open GL. I've resintalled windows twice, basically did everything that I've always ever done and had working fine. Now, nothing. Claymore just sits there. What's weird, is when I run the start.bat file as administrator, then I get the "cannot find EthDcrMiner.64" but it starts up and doesn't close when I start it up non-admin so I really don't think that's the problem. Can ANYONE help? this has been like 2 solid days of troubleshooting.

[/quote]

What version of windows do you have now? It sounds like the 1803 problems. Roll back to the previous windows version
[/quote]

I had 1795 or something like that. 1803 indeed screwed me. New windows installs/rollbacks...nothing has helped. I read that registry stuff doesn’t get sorrted out on a windows reset...so I made a totally new USB install and hopefully i get a truly clean version of Windows. Is there a way to force your computer to go back to a build? I’m assuming this new install will be 1803. Windows has worked great for my rig, but I needed an update for a file and the ass updated EVERYTHING. Kaboom, no more mining.

Try this:

[1] Run DDU to clean out video drivers. http://www.guru3d.com/files-details/display-driver-uninstaller-download.html
[2] Install latest AMD video drivers. https://support.amd.com/en-us/download
[3] Run pixelpatcher. https://www.monitortests.com/forum/Thread-AMD-ATI-Pixel-Clock-Patcher
[4] Set AMD drivers to "Compute" mode, if available for RX470. https://support.amd.com/en-us/kb-articles/Pages/DH-024.aspx

Hope this helps.

No guarantees, but it would at least rule out the github version problem...

What version windows are you running? Driver version? Bat file config...

So if I download 11.8 or 11.7 and paste my START MINING bat, everything should be fine?

Don't use the github version, others in the forum have had trouble with it (not sure if it is genuine). 11.9 was a keccak fix, just use 11.7 or 11.8 from the first post links.

Hello, I have an issue with my mining rig since epoch 200, I downloaded v11.8 from github since I can't find v11.9 (MEGA never downloads and I can't fond v11.9 for windows on google drive link).

Here is what I did,

I downloaded v11.8 (uploaded 20 days ago, according to GITHUB). Then I copied and pasted my epool from the claymore's older version, same as START MINING bat file.

Once I run bat file, it runs until it says:

"You can use  + and - keys to achieve best ETH speed, see "FINE TUNING" section in read me for details.

After that message, my computer gets HYPER slow, so I take like a minute to close claymore, then I must restart my mining rig.

By the way, I'm new to this forum so I don't know how to post pictures.

Thanks for your help.

Post your command line and or config.txt file.

What are your specs? Windows version?

Yes ....   Radeon 18.5.1