Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 222.

BogdanCo

hero member

Activity: 729

Merit: 513

Quote from: ippikiokami on June 15, 2018, 11:22:06 PM

Been running my miners for months without any major issues. In the last few weeks I was out of town and they went down. Today I've tried reinstalling the drivers and updating to the latest claymore miner and can't even get it past the part where it mentions which pool you are contacting. After 5 minutes it gives the error and restarts.

Anyone have an idea what might be the issue?

https://bitcointalksearch.org/topic/m.39173647

ippikiokami

newbie

Activity: 5

Merit: 0

Been running my miners for months without any major issues. In the last few weeks I was out of town and they went down. Today I've tried reinstalling the drivers and updating to the latest claymore miner and can't even get it past the part where it mentions which pool you are contacting. After 5 minutes it gives the error and restarts.

Anyone have an idea what might be the issue?

Tomason

newbie

Activity: 85

Merit: 0

Quote from: Roadrage68 on June 15, 2018, 11:06:18 PM

Quote from: Tomason on June 15, 2018, 10:53:17 PM

Quote from: psaux on June 15, 2018, 10:22:38 PM

Quote from: Roadrage68 on June 15, 2018, 10:09:28 PM

Follow this guide.. https://mining.help/

Works, thank u very much.!

I have follow the guide , but nothing.. When run the miner it just closes.

I am so affraid. On AMD Work fine, but Nvidia absolutely not. any help?

Are you using this setting?

from the readme.txt:

-platform selects GPUs manufacturer. 1 - use AMD GPUs only. 2 - use NVIDIA GPUs only. 3 - use both AMD and NVIDIA GPUs. Default value is "3".

Yes , i have only AMD an Nvidia rigs , the problem is my Nvidia rig, i have follow your instruccions about antivirus but nothing.
when run the bat just when all seen to be right to start then the dialog that say that something is wrong

Roadrage68

newbie

Activity: 24

Merit: 0

Quote from: Tomason on June 15, 2018, 10:53:17 PM

Quote from: psaux on June 15, 2018, 10:22:38 PM

Quote from: Roadrage68 on June 15, 2018, 10:09:28 PM

Follow this guide.. https://mining.help/

Works, thank u very much.!

I have follow the guide , but nothing.. When run the miner it just closes.

I am so affraid. On AMD Work fine, but Nvidia absolutely not. any help?

Are you using this setting?

from the readme.txt:

-platform selects GPUs manufacturer. 1 - use AMD GPUs only. 2 - use NVIDIA GPUs only. 3 - use both AMD and NVIDIA GPUs. Default value is "3".

Tomason

newbie

Activity: 85

Merit: 0

Quote from: psaux on June 15, 2018, 10:22:38 PM

Quote from: Roadrage68 on June 15, 2018, 10:09:28 PM

Follow this guide.. https://mining.help/

Works, thank u very much.!

I have follow the guide , but nothing.. When run the miner it just closes.

I am so affraid. On AMD Work fine, but Nvidia absolutely not. any help?

psaux

newbie

Activity: 8

Merit: 0

Quote from: Roadrage68 on June 15, 2018, 10:09:28 PM

Follow this guide.. https://mining.help/

Works, thank u very much.!

Roadrage68

newbie

Activity: 24

Merit: 0

Follow this guide.. https://mining.help/

psaux

newbie

Activity: 8

Merit: 0

Quote from: DireWolfM14 on June 15, 2018, 09:40:08 PM

Quote from: psaux on June 15, 2018, 08:26:37 PM

Quote from: Roadrage68 on June 15, 2018, 07:17:27 PM

Quote from: psaux on June 15, 2018, 06:15:57 PM

hello my friends, can u say me why 11.8 don't work in windows 10 i do click in executable and this don't start and don't happend nothing, ... can u say me what is the problem please?.... sorry for my bad english. thank u very much.

You will need to run it from a batch file, unless all of the needed info is in your config.txt.
There is a minimum amount of info needed to execute the program; ie. a pool address, a mining address, etc.

Yes i run it from .bat and don't work... bro.

Add a line at the end of your .bat with nothing but "pause" It will leave the command window open after the miner stops. Then you can see what error, if any it's coming up with. Very handy for trouble shooting.

the problem is the miner don't start and don't happend nothing!!! I do click in .bat and in .exe and don't happend nothing...

DireWolfM14

copper member

Activity: 2338

Merit: 4543

Join the world-leading crypto sportsbook NOW!

Quote from: psaux on June 15, 2018, 08:26:37 PM

Quote from: Roadrage68 on June 15, 2018, 07:17:27 PM

Quote from: psaux on June 15, 2018, 06:15:57 PM

hello my friends, can u say me why 11.8 don't work in windows 10 i do click in executable and this don't start and don't happend nothing, ... can u say me what is the problem please?.... sorry for my bad english. thank u very much.

You will need to run it from a batch file, unless all of the needed info is in your config.txt.
There is a minimum amount of info needed to execute the program; ie. a pool address, a mining address, etc.

Yes i run it from .bat and don't work... bro.

Add a line at the end of your .bat with nothing but "pause" It will leave the command window open after the miner stops. Then you can see what error, if any it's coming up with. Very handy for trouble shooting.

jeremyismer

newbie

Activity: 55

Merit: 0

Quote from: psaux on June 15, 2018, 08:26:37 PM

Quote from: Roadrage68 on June 15, 2018, 07:17:27 PM

Quote from: psaux on June 15, 2018, 06:15:57 PM

hello my friends, can u say me why 11.8 don't work in windows 10 i do click in executable and this don't start and don't happend nothing, ... can u say me what is the problem please?.... sorry for my bad english. thank u very much.

You will need to run it from a batch file, unless all of the needed info is in your config.txt.
There is a minimum amount of info needed to execute the program; ie. a pool address, a mining address, etc.

Yes i run it from .bat and don't work... bro.

Have you checked you virus scanner and added an exception? It often closes the miner. What is the config in your bat file?

psaux

newbie

Activity: 8

Merit: 0

Quote from: Roadrage68 on June 15, 2018, 07:17:27 PM

Quote from: psaux on June 15, 2018, 06:15:57 PM

hello my friends, can u say me why 11.8 don't work in windows 10 i do click in executable and this don't start and don't happend nothing, ... can u say me what is the problem please?.... sorry for my bad english. thank u very much.

You will need to run it from a batch file, unless all of the needed info is in your config.txt.
There is a minimum amount of info needed to execute the program; ie. a pool address, a mining address, etc.

Yes i run it from .bat and don't work... bro.

Roadrage68

newbie

Activity: 24

Merit: 0

Quote from: psaux on June 15, 2018, 06:15:57 PM

hello my friends, can u say me why 11.8 don't work in windows 10 i do click in executable and this don't start and don't happend nothing, ... can u say me what is the problem please?.... sorry for my bad english. thank u very much.

You will need to run it from a batch file, unless all of the needed info is in your config.txt.
There is a minimum amount of info needed to execute the program; ie. a pool address, a mining address, etc.

psaux

newbie

Activity: 8

Merit: 0

hello my friends, can u say me why 11.8 don't work in windows 10 i do click in executable and this don't start and don't happend nothing, ... can u say me what is the problem please?.... sorry for my bad english. thank u very much.

D.L.S.

newbie

Activity: 2

Merit: 0

Quote from: Claymore on June 15, 2018, 07:37:14 AM

NOTE:
If you use old version of the miner (less than 10.2) and mine ETH or ETC - please upgrade and use v10.2 or higher. Old versions don't support DAG epoch higher than #199, this value can be lower if you use non-zero "-eres" option value (it is "2" by default).
See v10.2 description in "History.txt" for details.

Today ETC stops mining because of this. I dont like newer versions(10.2 or higher) because i had problems that miner restarts too often, it writes in log:
"Temperature control thread hangs, need to restart miner! Restarting OK, exit..." - 10.1 dont have this issue.

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

NOTE:
If you use old version of the miner (less than 10.2) and mine ETH or ETC - please upgrade and use v10.2 or higher. Old versions don't support DAG epoch higher than #199, this value can be lower if you use non-zero "-eres" option value (it is "2" by default).
See v10.2 description in "History.txt" for details.

Beginner85

newbie

Activity: 247

Merit: 0

Quote from: Roadrage68 on June 14, 2018, 10:20:04 PM

Has anyone ever noticed that when mining the devfee the latency to the "same pool" is half.
For instance I was mining CLO on an older version (10.6) to my buddies pool and when mining normally my latency for share accepted was like 30ms but when the devfee kicked in, the latency to the same pool was 15ms.. Is this something built in by Claymore to find more blocks?

Maybe it's just me..

Yeah stealing and scam clo block look only run 40 second together all miners and find 130 block in 2miners solo clo pool
Claymore wallet 1 : https://solo-clo.2miners.com/tr/account/0xcee753dd0ba3edf78d6fe70044e6039027d32d6a
Claymore wallet 2 : https://solo-clo.2miners.com/tr/account/0x02235f701b3d05411de0ba98584b1dec337b26d9
Claymore wallet 3 : https://solo-clo.2miners.com/tr/account/0xb1892dc2d497501ddad26e86ca45af0f03621dfe
Claymore wallet 4 : https://solo-clo.2miners.com/tr/account/0x0417e776fafaa5e68e7ce5c27938a1c2c31ae3b9
Claymore wallet 5 : https://solo-clo.2miners.com/tr/account/0xcc83b1e5fcce68696b51c25ecda11a9bb38ebb78
Claymore wallet 6 : https://solo-clo.2miners.com/tr/account/0x7d948d1459805c93606df4f921373d09cb9e2222
40 second run and find all blocks..
Sorry not claymore wallets this coin fcking scam or hacking all adreses goin to 1 adreses only and now have 28m + clo hack or scam..

Swat33333

newbie

Activity: 7

Merit: 0

Quote from: Swat33333 on June 14, 2018, 01:41:58 AM

Quote from: skyline_king on June 14, 2018, 12:09:39 AM

Quote from: Swat33333 on June 13, 2018, 07:00:38 AM

Good afternoon. Help me to understand. I ask forgiveness if I repeat, 1200 pages are difficult to overpower. There is Rig 1x1080 Ti and 6x1080 (7 GPU) Claymore's Dual Ethereum v11.8 closes and does not want to work, and Claymore's v10 and 11.1 works, but not stable. With 6 GPU all the rules. The -gser option does not help.

Windows 7
RAM 8 Gb
Paging file 40 Gb
Nvidia driver 398.11 (tried 385.69)

I would like to run on version 11.8
Thank you in advance.

what version of afterburner are you using? I solved the same problem with the reinstallation of it

4.5

I tried 4.0, 4.4 the same result then I tried absolutely the same without it.What version are you using Huh

Roadrage68

newbie

Activity: 24

Merit: 0

Has anyone ever noticed that when mining the devfee the latency to the "same pool" is half.
For instance I was mining CLO on an older version (10.6) to my buddies pool and when mining normally my latency for share accepted was like 30ms but when the devfee kicked in, the latency to the same pool was 15ms.. Is this something built in by Claymore to find more blocks?

Maybe it's just me..

Beginner85

newbie

Activity: 247

Merit: 0

Quote from: Roadrage68 on June 13, 2018, 11:01:28 PM

Quote from: Beginner85 on June 13, 2018, 06:33:59 AM

Good scam all blocks with devfee in 2miners clo solo pool..

What are you saying?

Hi my friends,
Dont mining on 2miners solo pool is stealing all solo callisto blocks thru with claymore devfee..
All miners starting devfee together and all solo blocks go to claymore..
Solo mining on this pool 120 ghs but when start claymore up to 380 ghs and claymore find all blocks..
For example,
https://solo-clo.2miners.com/tr/account/0xcee753dd0ba3edf78d6fe70044e6039027d32d6a
https://solo-clo.2miners.com/tr/account/0x02235f701b3d05411de0ba98584b1dec337b26d9
https://solo-clo.2miners.com/tr/account/0xb1892dc2d497501ddad26e86ca45af0f03621dfe
https://solo-clo.2miners.com/tr/account/0x0417e776fafaa5e68e7ce5c27938a1c2c31ae3b9
https://solo-clo.2miners.com/tr/account/0xcc83b1e5fcce68696b51c25ecda11a9bb38ebb78
https://solo-clo.2miners.com/tr/account/0x7d948d1459805c93606df4f921373d09cb9e2222
40 second run and find all blocks..
Sorry not claymore wallets this coin fcking scam or hacking all adreses goin to 1 adreses only and now have 28m + clo hack or scam..

Swat33333

newbie

Activity: 7

Merit: 0

Quote from: skyline_king on June 14, 2018, 12:09:39 AM

Quote from: Swat33333 on June 13, 2018, 07:00:38 AM

Good afternoon. Help me to understand. I ask forgiveness if I repeat, 1200 pages are difficult to overpower. There is Rig 1x1080 Ti and 6x1080 (7 GPU) Claymore's Dual Ethereum v11.8 closes and does not want to work, and Claymore's v10 and 11.1 works, but not stable. With 6 GPU all the rules. The -gser option does not help.

Windows 7
RAM 8 Gb
Paging file 40 Gb
Nvidia driver 398.11 (tried 385.69)

I would like to run on version 11.8
Thank you in advance.

what version of afterburner are you using? I solved the same problem with the reinstallation of it

4.5

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 222. (Read 6590718 times)