Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 218.

kpatrik

newbie

Activity: 7

Merit: 0

Quote from: hugomenezes on June 24, 2018, 06:34:03 AM

Quote from: damba_ on June 24, 2018, 06:23:00 AM

Quote from: hugomenezes on June 24, 2018, 06:03:40 AM

Hi all,
I need some help to resolve a problem on my Rig.
My Specs is:
Motherboard: ASUS B250 Miner Expert with lastest bios
RAM: 4GB
HDD:320GB
CPU: G4400
VGA: MSI RX580 Armor 8GB + Gigabyte RX580 Gaming 8GB
PSU: 2000W
Miner: Claymore 11.8
OS: Windows 10 Pro

I had Windows 10 with all updates, the drivers all updated and my problem is the mh/s speed, i only get 22mh/s i try to put diferent clocks speed on GPU and RAM but the result its the same 22mh/s.
I build other RIG with the same hardware and i get 30mh/s on RX580 with clocks GPU 1250Mhz 0.950v RAM 2150Mhz 0.950v.

Anyone had this problem?
Sry for my poor english.

Regards

Did you switch your gpu workload from graphics to compute?
In Claymore 11.6 or newer you can: press "y" key to turn on "Compute Mode" in AMD drivers for all cards
That could be the problem.

Yes

Try this mining OS for free: MinerOne OS https://minerone.net

hugomenezes

newbie

Activity: 6

Merit: 0

Quote from: damba_ on June 24, 2018, 06:23:00 AM

Quote from: hugomenezes on June 24, 2018, 06:03:40 AM

Hi all,
I need some help to resolve a problem on my Rig.
My Specs is:
Motherboard: ASUS B250 Miner Expert with lastest bios
RAM: 4GB
HDD:320GB
CPU: G4400
VGA: MSI RX580 Armor 8GB + Gigabyte RX580 Gaming 8GB
PSU: 2000W
Miner: Claymore 11.8
OS: Windows 10 Pro

I had Windows 10 with all updates, the drivers all updated and my problem is the mh/s speed, i only get 22mh/s i try to put diferent clocks speed on GPU and RAM but the result its the same 22mh/s.
I build other RIG with the same hardware and i get 30mh/s on RX580 with clocks GPU 1250Mhz 0.950v RAM 2150Mhz 0.950v.

Anyone had this problem?
Sry for my poor english.

Regards

Did you switch your gpu workload from graphics to compute?
In Claymore 11.6 or newer you can: press "y" key to turn on "Compute Mode" in AMD drivers for all cards
That could be the problem.

Yes

damba_

jr. member

Activity: 150

Merit: 3

Quote from: hugomenezes on June 24, 2018, 06:03:40 AM

Hi all,
I need some help to resolve a problem on my Rig.
My Specs is:
Motherboard: ASUS B250 Miner Expert with lastest bios
RAM: 4GB
HDD:320GB
CPU: G4400
VGA: MSI RX580 Armor 8GB + Gigabyte RX580 Gaming 8GB
PSU: 2000W
Miner: Claymore 11.8
OS: Windows 10 Pro

I had Windows 10 with all updates, the drivers all updated and my problem is the mh/s speed, i only get 22mh/s i try to put diferent clocks speed on GPU and RAM but the result its the same 22mh/s.
I build other RIG with the same hardware and i get 30mh/s on RX580 with clocks GPU 1250Mhz 0.950v RAM 2150Mhz 0.950v.

Anyone had this problem?
Sry for my poor english.

Regards

Did you switch your gpu workload from graphics to compute?
In Claymore 11.6 or newer you can: press "y" key to turn on "Compute Mode" in AMD drivers for all cards
That could be the problem.

hugomenezes

newbie

Activity: 6

Merit: 0

Hi all,
I need some help to resolve a problem on my Rig.
My Specs is:
Motherboard: ASUS B250 Miner Expert with lastest bios
RAM: 4GB
HDD:320GB
CPU: G4400
VGA: MSI RX580 Armor 8GB + Gigabyte RX580 Gaming 8GB
PSU: 2000W
Miner: Claymore 11.8
OS: Windows 10 Pro

I had Windows 10 with all updates, the drivers all updated and my problem is the mh/s speed, i only get 22mh/s i try to put diferent clocks speed on GPU and RAM but the result its the same 22mh/s.
I build other RIG with the same hardware and i get 30mh/s on RX580 with clocks GPU 1250Mhz 0.950v RAM 2150Mhz 0.950v.

Anyone had this problem?
Sry for my poor english.

Regards

Ruster87

newbie

Activity: 13

Merit: 0

Quote from: mehudi on June 23, 2018, 12:03:50 PM

Hi all,

after upgrading to Claymore 11.8 some of my rigs started restarting every 10 min or so. i've reinstalled drivers, checked connections.

i keep getting message in the log file that he GPUx has failed openGL and then 'server: accept failed with error: 10004'

i've got RX480 cards with 4 mb ram.

please help.

tbia

Add me on telegram tommyzjh. I do tuning and diagnostics for a fee

robert1b

newbie

Activity: 1

Merit: 0

My rig restart several times with a message
WATCHDOG: GPU 3 hangs in OpenCL call, exit
WATCHDOG: GPU 3 hangs in OpenCL call, exit
This happened with different GPU. (Six RX580 Nitro+) working on Windows 10
In previous version, there was no restart. Rig working several days without restart.
My config:
-epsw x
-tstop 85
-tt 60
-platform 1
-fanmin 10
-fanmax 100
-powlim -30
-cclock 1130
-mclock 2150
-cvddc 860
-mvddc 860
-dcri 14
-mode 1
-mport -3333
-asm 1
#-esm 1
-r >20
#-wd 0

ETH: 06/24/18-09:46:58 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 182.289 Mh/s, Total Shares: 34, Rejected: 0, Time: 00:13
ETH: GPU0 30.386 Mh/s, GPU1 30.386 Mh/s, GPU2 30.384 Mh/s, GPU3 30.373 Mh/s, GPU4 30.377 Mh/s, GPU5 30.383 Mh/s
GPU0 t=48C fan=33%, GPU1 t=49C fan=34%, GPU2 t=50C fan=33%, GPU3 t=48C fan=35%, GPU4 t=51C fan=35%, GPU5 t=50C fan=34%

davidzai

newbie

Activity: 23

Merit: 0

Anyone experience hashrate drop?

I am using GTX1070ti x 6 mining ETC at etc.ethermine.org. Already 1 week plus my average hashrate was 190mh/s. But since 13 hours ago, my average hashrate drop to 160mh/s.

Already restarted the rig, still the same... Running my rig on smos with claymore v11.8

TigTex

jr. member

Activity: 55

Merit: 5

Quote from: carlo_0000 on June 22, 2018, 04:53:50 PM

Quote from: TigTex on June 20, 2018, 06:25:38 PM

Don't use the "blockchain beta" driver. It is already included on the latest AMD adrenaline drivers from amd.com/drivers. Please stop spreading old news!
-> go to amd.com/drivers and download the latest WHQL driver
-> open the adrenaline control panel and change the settings from GRAPHICS to COMPUTE mode for EACH AMD CARD that you have. Reboot and recheck if compute mode is still enabled
You should have more speed than using old blockchain driver that was created for testing purposes. Also it's the only driver that is fully compatible with windows 1803

you sure? i did not test the last drivers for rx series

but i can say on vega the blockchain is at lease 5% faster than the adrenaline

With RX580, adrenaline is faster than the blockchain drivers (<1%, minimal gains on ETH). No idea about the vega's

Roadrage68

newbie

Activity: 24

Merit: 0

Quote from: Euro1121 on June 23, 2018, 09:05:31 AM

Quote from: kgminer on June 22, 2018, 06:31:23 PM

Quote from: Euro1121 on June 22, 2018, 06:22:36 PM

Hi everyone,
I'm here because for the first time I'm trying to mine with claymore 11.8.
But unfortunately it crash on startup.
i had put my ethereum wallet address on start.bat.

ethDcrminer64.exe -epool eu1.ethermine.org:4444 -ewal "my address" -epsw x

before crashing on the screen it says:

ETH 2 pool are specified
Main ethereum pool is eu1.ethermine.org:4444
DCR: 0 Pool is specified

my system is:

z270gt6
intel celeron g3930
4gb ram
ssd120 gb
MSI gtx 1060 6gb OC

I already changed the paging file at 36000MB

updated Motherboard bios

downloaded and set MSI afterburner with:

POWER LIMIT: 65%
temp limit 85degrees not connected to power limit
CORE CLOCK 0
MEMORY CLOCK 480
FAN SPEED AUTO

any suggestion is welcome :-)

thank you in advance!!!!

Copy\paste log file here.
Are you mining on windows or Linux? if windows what is the windows version?

this is the log

01:17:14:960 1830 Check and remove old log files...
01:17:14:960 1830 args: -epool eu1.ethermine.org:4444 -ewal 0xa4a1b5803ba8d8f04Dff2F6C6Dd9f6b16e8b10A4 -epsw x
01:17:14:960 1830
01:17:14:960 1830 …ÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕª
01:17:14:960 1830 ∫ Claymore's Dual GPU Miner - v11.8 ∫
01:17:14:960 1830 ∫ ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK ∫
01:17:14:960 1830 »ÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕº
01:17:14:960 1830
01:17:14:960 1830 b591
01:17:15:179 1830 ETH: 2 pools are specified
01:17:15:179 1830 Main Ethereum pool is eu1.ethermine.org:4444
01:17:15:179 1830 DCR: 0 pool is specified

Check your dpools.txt? And your epools.txt while you are at it..
Looks like something in this file may be active, no # in front of line..

castillojim

newbie

Activity: 17

Merit: 0

Have problems with ethpill and 1080s with Claymore. Any solution yet?

mehudi

newbie

Activity: 1

Merit: 0

Hi all,

after upgrading to Claymore 11.8 some of my rigs started restarting every 10 min or so. i've reinstalled drivers, checked connections.

i keep getting message in the log file that he GPUx has failed openGL and then 'server: accept failed with error: 10004'

i've got RX480 cards with 4 mb ram.

please help.

tbia

Bulltime

newbie

Activity: 8

Merit: 1

Quote from: Tomason on June 18, 2018, 02:03:07 PM

Please, no one of you is mining ethereum with nvidia through Ethermine in win 10?.
I need someone to help me, none of the versions of Claymore work.

Complete system specs including whats loaded on your HDD.SSD

Then what issues are you running in to first to last.

Euro1121

newbie

Activity: 3

Merit: 0

Quote from: kgminer on June 22, 2018, 06:31:23 PM

Quote from: Euro1121 on June 22, 2018, 06:22:36 PM

Hi everyone,
I'm here because for the first time I'm trying to mine with claymore 11.8.
But unfortunately it crash on startup.
i had put my ethereum wallet address on start.bat.

ethDcrminer64.exe -epool eu1.ethermine.org:4444 -ewal "my address" -epsw x

before crashing on the screen it says:

ETH 2 pool are specified
Main ethereum pool is eu1.ethermine.org:4444
DCR: 0 Pool is specified

my system is:

z270gt6
intel celeron g3930
4gb ram
ssd120 gb
MSI gtx 1060 6gb OC

I already changed the paging file at 36000MB

updated Motherboard bios

downloaded and set MSI afterburner with:

POWER LIMIT: 65%
temp limit 85degrees not connected to power limit
CORE CLOCK 0
MEMORY CLOCK 480
FAN SPEED AUTO

any suggestion is welcome :-)

thank you in advance!!!!

Copy\paste log file here.
Are you mining on windows or Linux? if windows what is the windows version?

this is the log

01:17:14:960 1830 Check and remove old log files...
01:17:14:960 1830 args: -epool eu1.ethermine.org:4444 -ewal 0xa4a1b5803ba8d8f04Dff2F6C6Dd9f6b16e8b10A4 -epsw x
01:17:14:960 1830
01:17:14:960 1830 …ÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕª
01:17:14:960 1830 ∫ Claymore's Dual GPU Miner - v11.8 ∫
01:17:14:960 1830 ∫ ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK ∫
01:17:14:960 1830 »ÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕº
01:17:14:960 1830
01:17:14:960 1830 b591
01:17:15:179 1830 ETH: 2 pools are specified
01:17:15:179 1830 Main Ethereum pool is eu1.ethermine.org:4444
01:17:15:179 1830 DCR: 0 pool is specified

Bit_fan_talks

jr. member

Activity: 121

Merit: 1

at last
now i can use only MS RDC

tnx

ermis1975

member

Activity: 198

Merit: 10

I have AMD and Nvidia cards in the same ring. AMD settings are ok. What I have to change to "start file" for NVIDIA? Can I control NVIDIA clocks etc from there like amd?

kgminer

jr. member

Activity: 100

Merit: 6

Quote from: Euro1121 on June 22, 2018, 06:22:36 PM

Hi everyone,
I'm here because for the first time I'm trying to mine with claymore 11.8.
But unfortunately it crash on startup.
i had put my ethereum wallet address on start.bat.

ethDcrminer64.exe -epool eu1.ethermine.org:4444 -ewal "my address" -epsw x

before crashing on the screen it says:

ETH 2 pool are specified
Main ethereum pool is eu1.ethermine.org:4444
DCR: 0 Pool is specified

my system is:

z270gt6
intel celeron g3930
4gb ram
ssd120 gb
MSI gtx 1060 6gb OC

I already changed the paging file at 36000MB

updated Motherboard bios

downloaded and set MSI afterburner with:

POWER LIMIT: 65%
temp limit 85degrees not connected to power limit
CORE CLOCK 0
MEMORY CLOCK 480
FAN SPEED AUTO

any suggestion is welcome :-)

thank you in advance!!!!

Copy\paste log file here.
Are you mining on windows or Linux? if windows what is the windows version?

Euro1121

newbie

Activity: 3

Merit: 0

Hi everyone,
I'm here because for the first time I'm trying to mine with claymore 11.8.
But unfortunately it crash on startup.
i had put my ethereum wallet address on start.bat.

ethDcrminer64.exe -epool eu1.ethermine.org:4444 -ewal "my address" -epsw x

before crashing on the screen it says:

ETH 2 pool are specified
Main ethereum pool is eu1.ethermine.org:4444
DCR: 0 Pool is specified

my system is:

z270gt6
intel celeron g3930
4gb ram
ssd120 gb
MSI gtx 1060 6gb OC

I already changed the paging file at 36000MB

updated Motherboard bios

downloaded and set MSI afterburner with:

POWER LIMIT: 65%
temp limit 85degrees not connected to power limit
CORE CLOCK 0
MEMORY CLOCK 480
FAN SPEED AUTO

any suggestion is welcome :-)

thank you in advance!!!!

carlo_0000

legendary

Activity: 1281

Merit: 1003

Quote from: TigTex on June 20, 2018, 06:25:38 PM

Don't use the "blockchain beta" driver. It is already included on the latest AMD adrenaline drivers from amd.com/drivers. Please stop spreading old news!
-> go to amd.com/drivers and download the latest WHQL driver
-> open the adrenaline control panel and change the settings from GRAPHICS to COMPUTE mode for EACH AMD CARD that you have. Reboot and recheck if compute mode is still enabled
You should have more speed than using old blockchain driver that was created for testing purposes. Also it's the only driver that is fully compatible with windows 1803

you sure? i did not test the last drivers for rx series

but i can say on vega the blockchain is at lease 5% faster than the adrenaline

DonValenteeno

jr. member

Activity: 103

Merit: 2

Quote from: Raja_MBZ on June 20, 2018, 05:21:04 PM

Quote from: ?? on ??

What is everyone getting for stock RX 470? I been away from mining for a while, and I'm getting around 15Mh/s. It seems low, but is the decrease due to the DAG file size?

No, you should be getting much more hashrate than that with your RX 470. At the very least, it should be getting you 23 Mh/s to 25 Mh/s. I'd suggest you to:

-reinstall drivers
-make sure that your graphics is not getting overheated and is staying below 88 degrees
-apply a bit of overclocking

BTW, are you using just one graphics card?

DAG FIX AMD drivers ver. 22.19.659.1? Memory overclocked to 1750 at least? BIOS re-flashed?

m0neymaker

newbie

Activity: 7

Merit: 0

Please add the feature in addition to the -minspeed reboot by the number of video cards found in the system. When the graphics cards overheat the hashtate begin to decrease, especially in warm rooms, -r 1 reboot occurs. But sometimes not all GPUs are defined and for correct determination it is necessary to reboot the farm several times. By the way, I have a strange summary hashrate on version 11.8: all 7 GPUs 29MH/s, but summ shows only 160 + - and GPU farm restarts.

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 218. (Read 6590718 times)