Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 271. (Read 6590565 times)
April 17, 2018, 03:37:59 AM
Hello. I use Claymore with nicehash pool to mine. I want to ask which pool is better for mining ETH or ALTcoins.
April 17, 2018, 12:48:03 AM
I never mined XVG yet.
How many XVG can we mine with: Nivida 1060 6GB, dual miner ETH+XVG?
And what is the best pool for XVG mining??
Thanks
How many XVG can we mine with: Nivida 1060 6GB, dual miner ETH+XVG?
And what is the best pool for XVG mining??
Thanks
I mine XVG using this pool... xvg.blake2s.com
The XVG is merely the icing on the cake for me, ETH is where the real money comes in. Mined XVG only adds maybe 10% on top of the ETH I mine, but something is better than nothing. I am also using GTX1060 3GB cards. I mine ETH at ~113MH/s and blake2 at ~1900MH/s reported running 6 of these cards.
April 16, 2018, 11:54:46 PM
I found this guide but it quite confused
Quote
-o stratum+tcp://.mine.zpool.ca: -u [-p c=,]
must be a valid address. Incorrect addresses will result in forfit of earning.
You can also use any valid wallet address from any of the coins we mine. This feature has had minimal testing so use at your own risk
YOU MUST ALWAYS set your currency in your password field that matches your wallet address: c=. The pool has mined hundreds of different coins and many have the same address version. We CAN NOT read your mind and possible know what currency you want. If no c= is set, your currency will be randomly chosen from any matching coins we have used. This HAS TO BE A REAL EXCHANGE SYMBOL. Do not use a symbol that has an added. Such as XVG-blake2s or AUR-sha or DGB-skein, these are ALL WRONG. These are used only for the pool to support multi-algo coins.
c= doesn't always work. However, if you fail to correct this and/or continue mining with the wrong currency detected you will NOT be able to change to the proper currency once an actual balance has been posted to the address. The quickest and easiest way for you to fix this, is create a new address, update your miners and make sure again you've set c= properly. Do not log a support ticket asking to convert your balance from one currency to another, they'll be closed. If you insist on keeping and using the original address. Your accrued balance will be cleared and the proper currency updated for you. Any blocks still new/immature/exchange will automaticlly convert to the new currency
See the "Pool Status" area on the right for PORT numbers.
You can also use any valid wallet address from any of the coins we mine. This feature has had minimal testing so use at your own risk
YOU MUST ALWAYS set your currency in your password field that matches your wallet address: c=
c=
See the "Pool Status" area on the right for PORT numbers.
April 16, 2018, 11:46:32 PM
I never mined XVG yet.
How many XVG can we mine with: Nivida 1060 6GB, dual miner ETH+XVG?
And what is the best pool for XVG mining??
Thanks
How many XVG can we mine with: Nivida 1060 6GB, dual miner ETH+XVG?
And what is the best pool for XVG mining??
Thanks
April 16, 2018, 11:30:22 PM
anyone pls help, i just have installed window 10 again, but claymore app is stop working when starting
what's error?
check eventlogs -> application logs and copy\paste error here
18:29:17:455 1630 Check and remove old log files...
18:29:17:455 1630 args: -epool asia1.ethermine.org:4444 -ewal 0x3a5d9aafc39352f968e7e177ec34237badc96d3e -epsw x
18:29:17:471 1630
18:29:17:471 1630 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
18:29:17:486 1630 º Claymore's Dual GPU Miner - v11.6 º
18:29:17:486 1630 º ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK º
18:29:17:596 1630 ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
18:29:17:627 1630
18:29:17:627 1630 b571
18:29:17:862 1630 ETH: 1 pool is specified
18:29:17:862 1630 Main Ethereum pool is asia1.ethermine.org:4444
18:29:17:877 1630 DCR: 0 pool is specified
Dude, He says "Eventlogs" not the Claymore miner Logs
check eventlogs -> application logs and copy\paste error here
To do this
Open Windowstart--> type Event Viewer --> Windows Logs --> Applications
my mistake
Faulting application name: EthDcrMiner64.exe, version: 0.0.0.0, time stamp: 0x5abe0fb3
Faulting module name: igdrclneo64.dll, version: 0.0.0.0, time stamp: 0x5a96b19b
Exception code: 0xc0000005
Fault offset: 0x0000000000030819
Faulting process id: 0x1b1c
Faulting application start time: 0x01d3ca95e69fb0a2
Faulting application path: C:\Users\toto\Downloads\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal_Blake2s_Keccak AMD+NVIDIA GPU Miner v11.6\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal_Blake2s_Keccak AMD+NVIDIA GPU Miner v11.6\EthDcrMiner64.exe
Faulting module path: C:\Windows\System32\DriverStore\FileRepository\igdlh64.inf_amd64_250db833a1cd577e\igdrclneo64.dll
Report Id: 9497195f-38a5-4a1a-81fb-d014b42913ef
Faulting package full name:
Faulting package-relative application ID:
detail:
- System
- Provider
[ Name] Application Error
- EventID 1000
[ Qualifiers] 0
Level 2
Task 100
Keywords 0x80000000000000
- TimeCreated
[ SystemTime] 2018-04-02T15:18:52.529715300Z
EventRecordID 4241
Channel Application
Computer DESKTOP-NSP2I4V
Security
- EventData
EthDcrMiner64.exe
0.0.0.0
5abe0fb3
igdrclneo64.dll
0.0.0.0
5a96b19b
c0000005
0000000000030819
1b1c
01d3ca95e69fb0a2
C:\Users\toto\Downloads\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal_Blake2s_Keccak AMD+NVIDIA GPU Miner v11.6\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal_Blake2s_Keccak AMD+NVIDIA GPU Miner v11.6\EthDcrMiner64.exe
C:\Windows\System32\DriverStore\FileRepository\igdlh64.inf_amd64_250db833a1cd577e\igdrclneo64.dll
9497195f-38a5-4a1a-81fb-d014b42913ef
tks all, this problem is solved after removing Intel driver
which Intel drivers did you delete? I'm getting the same error
Faulting application name: EthDcrMiner64.exe, version: 0.0.0.0, time stamp: 0x5abe0fb3
Faulting module name: igdrclneo64.dll, version: 0.0.0.0, time stamp: 0x5a96b19b
Exception code: 0xc0000005
Fault offset: 0x0000000000030819
Faulting process id: 0x1adc
Faulting application start time: 0x01d3d5f908532e32
Faulting application path: C:\Users\slik\Downloads\eth\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal_Blake2s_Keccak AMD+NVIDIA GPU Miner v11.6\EthDcrMiner64.exe
Faulting module path: C:\WINDOWS\System32\DriverStore\FileRepository\igdlh64.inf_amd64_250db833a1cd577e\igdrclneo64.dll
Report Id: 9e7b4464-c177-442e-9c2e-b816c3cceaec
Faulting package full name:
Faulting package-relative application ID:
April 16, 2018, 10:45:57 PM
11.6 do increase Nividia card hash little bit, nice job.
April 16, 2018, 10:38:20 PM
Anyone has a working verge pool for someone in the US east? I tried every pool and the best I found is NL pool and I'm only getting 60% of the payout I should be getting. Unless every calculator is wrong..
I have 70 mining rigs so this is quite a big problem for me
I have 70 mining rigs so this is quite a big problem for me
April 16, 2018, 07:53:43 PM
I've been trying to find the best dcri for my 13 x RX580 rig. I currently use claymore 11.5. So I made a couple of scripts with autohotkey that do the following: take a couple screenshots every hour of the ethermine site and of the command line like if you have pressed "s", every 12 hours autodetect the best dcri like if you pressed "z" and take a screenshot. Are all these information I am collecting completely useless, or not? How would you use them? How did you find the best dcri for your cards, and how can you be sure that you have actually found it? Thanks in advance.
Why would you use that over the autodetect of Claymore? Or are you trying to check Claymore is doing it right?
April 16, 2018, 06:49:18 PM
I've been trying to find the best dcri for my 13 x RX580 rig. I currently use claymore 11.5. So I made a couple of scripts with autohotkey that do the following: take a couple screenshots every hour of the ethermine site and of the command line like if you have pressed "s", every 12 hours autodetect the best dcri like if you pressed "z" and take a screenshot. Are all these information I am collecting completely useless, or not? How would you use them? How did you find the best dcri for your cards, and how can you be sure that you have actually found it? Thanks in advance.
1. How did you find the best dcri for your cards, and how can you be sure that you have actually found it?
Start each card and use the + and - at runtime to adjust the dcri- and check the Hash rate and memory errors- once the best dcri is exceeded it will have an effect on the hash rate - now go back to the best hash rate
2. ... of the command line like if you have pressed "s
This data could be used to trigger alerts if the GPU hash rate is not as expected or has incorrect shares
Can you please post the script for your hotkey of the command line like if you have pressed "s"
April 16, 2018, 05:35:26 PM
I've been trying to find the best dcri for my 13 x RX580 rig. I currently use claymore 11.5. So I made a couple of scripts with autohotkey that do the following: take a couple screenshots every hour of the ethermine site and of the command line like if you have pressed "s", every 12 hours autodetect the best dcri like if you pressed "z" and take a screenshot. Are all these information I am collecting completely useless, or not? How would you use them? How did you find the best dcri for your cards, and how can you be sure that you have actually found it? Thanks in advance.
April 16, 2018, 05:26:36 PM
Hello,
I'm new to the forum
Can someone help me? when i try to mine eth i get this errors...
I have an GTX 1060 3gb, is it because i don't have enough ram?
https://imgur.com/a/1sYTX
I'm new to the forum
Can someone help me? when i try to mine eth i get this errors...
I have an GTX 1060 3gb, is it because i don't have enough ram?
https://imgur.com/a/1sYTX
Ensure your swap file is at least 16GB.
Your card should still be able to mine ETH https://investoon.com/tools/dag_size
Post your mining configuration, this can help with figuring out what's wrong.
April 16, 2018, 01:45:34 PM
hello
April 16, 2018, 01:42:46 PM
Hello,
I'm new to the forum
Can someone help me? when i try to mine eth i get this errors...
I have an GTX 1060 3gb, is it because i don't have enough ram?
https://imgur.com/a/1sYTX
I'm new to the forum
Can someone help me? when i try to mine eth i get this errors...
I have an GTX 1060 3gb, is it because i don't have enough ram?
https://imgur.com/a/1sYTX
April 16, 2018, 09:02:01 AM
using the latest version. Having 6 RX480 and 1 1070 cards.
I used to mine ETH with about 28 MH/s on each card then I switched to altcoins and getting until today a stable 200 MH/s with my 7 cards (28 per card).
Now switched back to ETH and getting only 17 MH/s on my RX480 and still 28 on my 1070 now.
All cards have 8 GB memory.
Any ideas what is wrong?
Thx
SJ
I used to mine ETH with about 28 MH/s on each card then I switched to altcoins and getting until today a stable 200 MH/s with my 7 cards (28 per card).
Now switched back to ETH and getting only 17 MH/s on my RX480 and still 28 on my 1070 now.
All cards have 8 GB memory.
Any ideas what is wrong?
Thx
SJ
Which amd driver version?
using 16.11.5 now. with newer versions it did not recognize all cards.
Use the blockchain driver.
https://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-Blockchain-Compute-Release-Notes.aspx
April 16, 2018, 08:51:34 AM
I use claymore v11.6 via HiveOS few days ago start problems with loop reload miner/reboot rigs.
Code:
=== Last 50 lines of /var/log/miner/claymore/lastrun_reboot.log ===
11:55:12:389 27fff700 recv: 51
11:55:12:389 27fff700 srv pck: 50
11:55:12:393 27fff700 srv bs: 0
11:55:12:393 27fff700 sent: 222
11:55:13:203 35ff3700 ETH: Stratum - Cannot connect to us1.ethpool.org:3333
11:55:13:203 35ff3700 DevFee: ETH: Stratum - Failed to connect, retry in 20 sec...
11:55:14:451 367f4700 ETH: checking pool connection...
11:55:14:451 367f4700 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
11:55:14:547 367f4700 buf: {"id":3,"jsonrpc":"2.0","result":["0x4dde1d47fc63b923c439f22ada15844445b652afb137256fe6b983b53b059789","0x38d7e4b9c575aa9a9da222b486ac059e7cfa04c61fb1dd58c432b72ce19ff04c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x531207"]}
11:55:17:391 27fff700 srv_thr cnt: 1, IP: 192.168.1.100
11:55:17:391 27fff700 recv: 51
11:55:17:391 27fff700 srv pck: 50
11:55:17:396 27fff700 srv bs: 0
11:55:17:396 27fff700 sent: 222
11:55:17:675 27fff700 srv_thr cnt: 1, IP: 127.0.0.1
11:55:17:675 27fff700 recv: 51
11:55:17:675 27fff700 srv pck: 50
11:55:17:677 27fff700 srv bs: 0
11:55:17:677 27fff700 sent: 222
11:55:19:464 367f4700 buf: {"id":0,"jsonrpc":"2.0","result":["0x6b17e810f82f14fd1b7360a79cf194023f3f6c74b166ac551a75da63ff4be55a","0x38d7e4b9c575aa9a9da222b486ac059e7cfa04c61fb1dd58c432b72ce19ff04c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x531208"]}
11:55:19:464 367f4700 ETH: 04/15/18-11:55:19 - New job from eu1.ethermine.org:4444
11:55:19:464 367f4700 target: 0x0000000112e0be82 (diff: 4000MH), epoch 181(2.41GB)
11:55:19:464 367f4700 ETH - Total Speed: 89.491 Mh/s, Total Shares: 100, Rejected: 0, Time: 01:18
11:55:19:464 367f4700 ETH: GPU0 15.042 Mh/s, GPU1 15.013 Mh/s, GPU2 14.984 Mh/s, GPU3 15.025 Mh/s, GPU4 14.723 Mh/s, GPU5 14.704 Mh/s
11:55:21:738 367f4700 sent: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x553eb06", "0x000000000000000000000000000000000000000000000000000000002ae46561"]}
11:55:21:833 367f4700 buf: {"id":6,"jsonrpc":"2.0","result":true}
11:55:22:400 27fff700 srv_thr cnt: 1, IP: 192.168.1.100
11:55:22:402 27fff700 recv: 51
11:55:22:402 27fff700 srv pck: 50
11:55:22:405 27fff700 srv bs: 0
11:55:22:405 27fff700 sent: 222
11:55:24:452 367f4700 ETH: checking pool connection...
11:55:24:452 367f4700 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
11:55:24:548 367f4700 buf: {"id":3,"jsonrpc":"2.0","result":["0x6b17e810f82f14fd1b7360a79cf194023f3f6c74b166ac551a75da63ff4be55a","0x38d7e4b9c575aa9a9da222b486ac059e7cfa04c61fb1dd58c432b72ce19ff04c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x531208"]}
11:55:27:406 27fff700 srv_thr cnt: 1, IP: 192.168.1.100
11:55:27:406 27fff700 recv: 51
11:55:27:406 27fff700 srv pck: 50
11:55:27:409 27fff700 srv bs: 0
11:55:27:409 27fff700 sent: 222
11:55:27:838 9ab64700 watchdog - fminer thread hangs
11:55:27:839 9ab64700 em hbt: 1, fm hbt: 145471,
11:55:27:839 9ab64700 Miner thread hangs, need to restart miner!
11:55:27:839 9ab64700 Rebooting
11:55:12:389 27fff700 recv: 51
11:55:12:389 27fff700 srv pck: 50
11:55:12:393 27fff700 srv bs: 0
11:55:12:393 27fff700 sent: 222
11:55:13:203 35ff3700 ETH: Stratum - Cannot connect to us1.ethpool.org:3333
11:55:13:203 35ff3700 DevFee: ETH: Stratum - Failed to connect, retry in 20 sec...
11:55:14:451 367f4700 ETH: checking pool connection...
11:55:14:451 367f4700 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
11:55:14:547 367f4700 buf: {"id":3,"jsonrpc":"2.0","result":["0x4dde1d47fc63b923c439f22ada15844445b652afb137256fe6b983b53b059789","0x38d7e4b9c575aa9a9da222b486ac059e7cfa04c61fb1dd58c432b72ce19ff04c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x531207"]}
11:55:17:391 27fff700 srv_thr cnt: 1, IP: 192.168.1.100
11:55:17:391 27fff700 recv: 51
11:55:17:391 27fff700 srv pck: 50
11:55:17:396 27fff700 srv bs: 0
11:55:17:396 27fff700 sent: 222
11:55:17:675 27fff700 srv_thr cnt: 1, IP: 127.0.0.1
11:55:17:675 27fff700 recv: 51
11:55:17:675 27fff700 srv pck: 50
11:55:17:677 27fff700 srv bs: 0
11:55:17:677 27fff700 sent: 222
11:55:19:464 367f4700 buf: {"id":0,"jsonrpc":"2.0","result":["0x6b17e810f82f14fd1b7360a79cf194023f3f6c74b166ac551a75da63ff4be55a","0x38d7e4b9c575aa9a9da222b486ac059e7cfa04c61fb1dd58c432b72ce19ff04c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x531208"]}
11:55:19:464 367f4700 ETH: 04/15/18-11:55:19 - New job from eu1.ethermine.org:4444
11:55:19:464 367f4700 target: 0x0000000112e0be82 (diff: 4000MH), epoch 181(2.41GB)
11:55:19:464 367f4700 ETH - Total Speed: 89.491 Mh/s, Total Shares: 100, Rejected: 0, Time: 01:18
11:55:19:464 367f4700 ETH: GPU0 15.042 Mh/s, GPU1 15.013 Mh/s, GPU2 14.984 Mh/s, GPU3 15.025 Mh/s, GPU4 14.723 Mh/s, GPU5 14.704 Mh/s
11:55:21:738 367f4700 sent: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x553eb06", "0x000000000000000000000000000000000000000000000000000000002ae46561"]}
11:55:21:833 367f4700 buf: {"id":6,"jsonrpc":"2.0","result":true}
11:55:22:400 27fff700 srv_thr cnt: 1, IP: 192.168.1.100
11:55:22:402 27fff700 recv: 51
11:55:22:402 27fff700 srv pck: 50
11:55:22:405 27fff700 srv bs: 0
11:55:22:405 27fff700 sent: 222
11:55:24:452 367f4700 ETH: checking pool connection...
11:55:24:452 367f4700 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
11:55:24:548 367f4700 buf: {"id":3,"jsonrpc":"2.0","result":["0x6b17e810f82f14fd1b7360a79cf194023f3f6c74b166ac551a75da63ff4be55a","0x38d7e4b9c575aa9a9da222b486ac059e7cfa04c61fb1dd58c432b72ce19ff04c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x531208"]}
11:55:27:406 27fff700 srv_thr cnt: 1, IP: 192.168.1.100
11:55:27:406 27fff700 recv: 51
11:55:27:406 27fff700 srv pck: 50
11:55:27:409 27fff700 srv bs: 0
11:55:27:409 27fff700 sent: 222
11:55:27:838 9ab64700 watchdog - fminer thread hangs
11:55:27:839 9ab64700 em hbt: 1, fm hbt: 145471,
11:55:27:839 9ab64700 Miner thread hangs, need to restart miner!
11:55:27:839 9ab64700 Rebooting
April 16, 2018, 03:46:37 AM
Hello,
I am mining Ethereum forks with 4G cards and I want the dev fee to be in Ethereum fork (DAG recreation crashes my miner from time to time), unfortunately the option " - Use "-allcoins exp -allpools 1" options " do not work in version 11.* . Can you please fix this.
I am mining Ethereum forks with 4G cards and I want the dev fee to be in Ethereum fork (DAG recreation crashes my miner from time to time), unfortunately the option " - Use "-allcoins exp -allpools 1" options " do not work in version 11.* . Can you please fix this.
April 16, 2018, 03:11:30 AM
April 16, 2018, 01:10:29 AM
There is no windows version to download.. 
April 15, 2018, 05:37:53 AM
Nice miner software, i have use it for long times, easy to configure and lite at my pc rig 
April 15, 2018, 01:48:32 AM
using the latest version. Having 6 RX480 and 1 1070 cards.
I used to mine ETH with about 28 MH/s on each card then I switched to altcoins and getting until today a stable 200 MH/s with my 7 cards (28 per card).
Now switched back to ETH and getting only 17 MH/s on my RX480 and still 28 on my 1070 now.
All cards have 8 GB memory.
Any ideas what is wrong?
Thx
SJ
I used to mine ETH with about 28 MH/s on each card then I switched to altcoins and getting until today a stable 200 MH/s with my 7 cards (28 per card).
Now switched back to ETH and getting only 17 MH/s on my RX480 and still 28 on my 1070 now.
All cards have 8 GB memory.
Any ideas what is wrong?
Thx
SJ
Which amd driver version?
using 16.11.5 now. with newer versions it did not recognize all cards.
Jump to: