Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 371. (Read 6590718 times)

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100
-mode 1

EthDcrMiner64.exe -etht 200, -epool http://127.0.0.1:8080, -ewal ---------------------, -epsw x, -ethi 8 -estale 1
-esm 1
-allpools.

Msi x370 gaming pro carbon M/b.
Amd ryzen 7 cpu.
16g 2667 Fury ram.
M.2 hdd.
x4 msi gaming x rx580 8gb  with modded bios-es .
x2 on ribbon risers in crossfire and x2 on usb risers.
Amd Block chain drivers.
1200w corsair platinum psu

i also use it for gaming that is why it is not a cheap cpu and such.

Thanks For your help Claymore.
I was warned about the security issues in the 10.5 I was using at the time.
I wanted to know if possible someone cold take some hashrate or it is a fault on Dwarfpools side?
I'm now using ver11 with ETH-proxy server and there seems do be improvement. I have tried Ethminer but yours has a better hash rate.
keep up the good work and stay on top of the vulnerabilities and I will also be stoping the remote port,
Cheers.  

Are you using the correct Claymore miner? please post your .bat file settings and your Hardware specifications to help you out more.

Incorrect. Miner creates second connection to the pool for devfee.


Please read first post of this thread. It will tell you about antiviruses alarms. Also learn about "-mport" option. Also make sure that you use recent version of the miner and downloaded the miner from the links from OP only.
If you still sure that my miner has backdoors/viruses - drop this miner asap and use some different miner that you like more.

PS. Here is my related message https://bitcointalksearch.org/topic/m.28540417

Hello Miners

version 11 crashes with the following error at random times. Do you have solution or troubleshooting steps?

``
18:03:14:704   aa4    B2S: 02/25/18-18:03:14 - New job from s.antminepool.com:5766
18:03:14:704   aa4   target: 0x0000000015554000 (diff: 51GH)
18:03:15:579   19cc   GPU 3, GpuMiner cu_k04 failed 4, unspecified launch failure
18:03:15:579   19cc   GPU 3, GpuMiner kx failed 1
18:03:15:594   19cc   Set global fail flag, failed GPU3
18:03:15:594   19cc   GPU 3 failed

```
this is 7*1060 (ASUS strix gtx1060 O6G Gaming) rig with the latest drivers from asus website

OC settings
Power 72%
Core Clock -230
Memory Clock +670

That's how the Dev fee works. Claymore replaces your wallet with his and mines for 36 seconds every hour. You should have asked Dwarfpool the time and duration of when the wallets were switched and compared it to the miner logs.

I have been getting detection of a virus backdoor in your software after installation.
Trojan:Win32/CoinMiner!bit.
my hashrate has been jumping up and down so i contacted dwarfpool , They stated analysis has shown that my wallet has been changing to another in a backdoor in your mining software.
i only mine ETH and I have not applied the no DEV fee option.
Is there something we should know?

That's how the Dev fee works. Claymore replaces your wallet with his and mines for 36 seconds every hour. You should have asked Dwarfpool the time and duration of when the wallets were switched and compared it to the miner logs.

You should read about dev fee in readme or in the first massage.
And ofcourse antivirus will detect CoinMiner because this program is a coin miner

I have been getting detection of a virus backdoor in your software after installation.
Trojan:Win32/CoinMiner!bit.

my hashrate has been jumping up and down so i contacted dwarfpool , They stated analysis has shown that my wallet has been changing to another in a backdoor in your mining software.
i only mine ETH and I have not applied the no DEV fee option.
Is there something we should know?

1060 w/3GB RAM should do about that, maybe 21Mh/s if you get things just right.  My Gigabyte card likes 70% power limit, about +220 GPU speed offset and +1000 memory offset.  Not all cards will do that, I have Hynix VRAM, also.  Some might get a little more, but I don't know of any way to set the memory more than +1000 offset.  My card will hold a stable +240 GPU, but I get crappy shares relative to what I get at +220.  Every single card is just a little different unless they came out of the same batch, same model from the same maker.  I have my temp max at 80C which is about what it does when I'm dual mining (and yes, about 350Mh/s for Verge / XVG is what I get, although you can tweak -dcri up to the best your card will do without impacting your ETH hashing much (I limit it to 1% impact) then you might be able to get 400+Mh/s but in my experience it messes things up and I get recycles way too often instead of it running the clock out (-r 239) at four hours, which is my self-imposed limit before I restart the miner.  I was using -dcri 70 which seemed to be the sweet spot for intensity on my specific card.  The other rig is a GTX1080 with RX 580's, all 8GB mostly Asus OC/ROG/Strix models with one Sapphire Nitro+ 580 OC.

Some people insist on just letting it run forever, but my machines seem to grow a minds of their own after a few hours, so 4 hours is what I picked.  For the GTX1060 memory ramped up to 10K speed, I build the DAG in between 8 and 9 seconds.  No big woop...  I am back to single mining ETH for now, I just get too darned squirrelly dual mining.

You can not change the nVidia GPU BIOS for GTX10x0 cards, it's encrypted and won't boot if you mess with it (which is assuming you are truly a crypto genius and can figure out the encryption, which nobody else has - so far, anyway), so you are stuck with mods using AfterBurner or nVidiaInspector, etc because Claymore doesn't do memory tweaks for nVidia (or fans, temps or power limits) like it does for AMD cards.

how to write in dpools.txt coins with different algorithms and is it possible? For example, the main coin is kessak, and spare blake2s. The option: "DCOIN: blake2s" does not work, rejected share

Remove the comma between 1150 and -mvddc

Yep all of the same type as well,
RX580 4GB Saphire Pulse.

I have never seen such high OC settings for 1060 with Hynix memory. What specific model do you have and do you have any clue about the manufacturing date?
You can push the memory clock above +1000 MHz through Asus GPU Tweak (details: http://bit.ly/2GHtYma, use translator).

Are they all AMD cards?

1060 w/3GB RAM should do about that, maybe 21Mh/s if you get things just right.  My Gigabyte card likes 70% power limit, about +220 GPU speed offset and +1000 memory offset.  Not all cards will do that, I have Hynix VRAM, also.  Some might get a little more, but I don't know of any way to set the memory more than +1000 offset.  My card will hold a stable +240 GPU, but I get crappy shares relative to what I get at +220.  Every single card is just a little different unless they came out of the same batch, same model from the same maker.