Author

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 391. (Read 6590565 times)

sr. member
Activity: 2142
Merit: 353
Xtreme Monster
I did some tests with antminepool, 30500MH/s (24 hours of stable mining) , I did receive 145 XVG , whattomine says it should be 162. Seems orphans.


Come on, you are complaining for something so close, If the difference was 30% then yes but your case is only 10%.

I guess a stable xvg pool is needed.
newbie
Activity: 67
Merit: 0
we are currently wasting hashpower mining xvg at nlpool, as we are mining all blake2s coins there. the way i see it, if we set c=xvg, we aren't paid for mined xsh (currently, because i think this pool is not exchanging for us).

please fix it nlpool devs.

Does antminer pay?

My friend has been mining xvg at http://mine.nlpool.nl for more than 24 hours and I must say that is much less than it was on antminer so far.

Yes Antminer is paying, once per hour, but with my 15kmhs.... around 7 verge per hour
newbie
Activity: 42
Merit: 0
I had some claymore 11 crashes, this seems happend on linux only, and when dual coin pool is not reachable/down:

ETH: 02/19/18-20:26:11 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 188.072 Mh/s, Total Shares: 2773, Rejected: 0, Time: 40:40
ETH: GPU0 26.884 Mh/s, GPU1 26.849 Mh/s, GPU2 26.868 Mh/s, GPU3 26.868 Mh/s, GPU
s
 B2S - Total Speed: 0.000 Mh/s, Total Shares: 6915, Rejected: 19
 B2S: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0
 B2S: Stratum - Cannot connect to s.antminepool.com:9009
 B2S: Stratum - Failed to connect, retry in 7 sec...
Miner thread hangs, need to restart miner!


Also when 2nd coin pool is down, then main mining speed is affected, not that much.

I did some tests with antminepool, 30500MH/s (24 hours of stable mining) , I did receive 145 XVG , whattomine says it should be 162. Seems orphans.
sr. member
Activity: 2142
Merit: 353
Xtreme Monster
Because it's the same Algo i think.

Also, there are problems with hashrate  and that is because your pool might need a faster internet connection to accommodate the users or you need to disable the torrents. I'm not joking, or if is nothing of what I said then it might be something holding your pool internet connection back cause the hashrate is nothing like used to me.

Maybe the payment is not as good as antminer because of the internet connection issues. Download and upload speed is the key here, need to be top notch.
jr. member
Activity: 84
Merit: 1
...

The whole Claymore's log from when the issue seems to start:

18:41:37:870   cc4   ETH - Total Speed: 99.571 Mh/s, Total Shares: 1173, Rejected: 0, Time: 34:22
18:41:37:870   cc4   ETH: GPU0 13.016 Mh/s, GPU1 12.974 Mh/s, GPU2 13.037 Mh/s, GPU3 13.019 Mh/s, GPU4 23.765 Mh/s, GPU5 23.760 Mh/s
18:41:38:355   1738   srv_thr cnt: 1, IP: 192.168.XX.XX


WTF?  Angry
I know, right? How could people copy that huge wall of text?

A) Devil is in the details. I'm running over 25 miners with 6-8 GPUs each almost all alone by myself. Build from scratch. many different models. RX. R9. GTX, ... And I had no exp in these stuff 9 months ago. I managed to do all of this, get a perfectly stable system with little to none problems, only by paying a great deal of attention to details. So I do the courtesy to others who may want to help me, by giving them "the option" to see and read the details.

B) If you get off your high horse, you'll see that I put the important parts short and sweet in the beginning. Giving the line of error which I think is the main thing. System spec. And few lines on what's up. THEN. Only then, I wrote "the whole log file from which the problem starts". So the post is not in anyway or from defined by the log file. You can simply ignore it. You don't need to quote it. And it will take 2 sec to scroll past it.

So if you don't have anything to say, stop talking. It's not Facebook or twitter, or text messages with your bff. It's a  forum. You can expect time to time a lengthy post. And as long as it's not messy, it's perfectly fine.
Ah, but I don't own a horse.  The issue is not with lengthy USEFUL posts, it's people quoting the "README!!.TXT" file entirely or such.

Never-the-less, it tends to be "drinking from a firehose" analogy: it's not useful and people just aren't thinking about what they are posting when they decide they - for whatever reason - include the entire "ReadMe" file in a post.  Sure, you can scroll right by it, hardly the point: somebody is paying for the storage here, and I can't for the life of me figure out why anyone needs multiple copies of that file, and it's not just the OP, it has been quoted.  WTF? Roll Eyes Huh
newbie
Activity: 208
Merit: 0
No, actually that is not true. There are people mining XSH ( Shield ) since the difficulty is more stable.

Best

Wijnand

About my question, why is showing xsh for people mining xvg?

Because it's the same Algo i think.
sr. member
Activity: 2142
Merit: 353
Xtreme Monster
No, actually that is not true. There are people mining XSH ( Shield ) since the difficulty is more stable.

Best

Wijnand

About my question, why is showing xsh for people mining xvg?
newbie
Activity: 208
Merit: 0
we are currently wasting hashpower mining xvg at nlpool, as we are mining all blake2s coins there. the way i see it, if we set c=xvg, we aren't paid for mined xsh (currently, because i think this pool is not exchanging for us).

please fix it nlpool devs.

No, actually that is not true. There are people mining XSH ( Shield ) since the difficulty is more stable.

Best

Wijnand
sr. member
Activity: 2142
Merit: 353
Xtreme Monster
we are currently wasting hashpower mining xvg at nlpool, as we are mining all blake2s coins there. the way i see it, if we set c=xvg, we aren't paid for mined xsh (currently, because i think this pool is not exchanging for us).

please fix it nlpool devs.

Does antminer pay?

My friend has been mining xvg at http://mine.nlpool.nl for more than 24 hours and I must say that is much less than it was on antminer so far.
newbie
Activity: 9
Merit: 0
Hi,
Can anyone help me please and give me some info on this error:

NVML API: failed to get device handle 4, error 15.
NVML API: failed to get device handle 5, error 15.
NVML API: failed to get device handle 4, error 15.
NVML API: failed to get device handle 5, error 15.
NVML API: failed to get device handle 4, error 15.
NVML API: failed to get device handle 5, error 15.
NVML API: failed to get device handle 4, error 15.
NVML API: failed to get device handle 5, error 15.

There are 4 1050 cards, and 2 1060 cards on the miner. Latest NVIDIA driver which for both cards is the same. MB: ASUS Z170-A ( I know a piece of crap!). PSU: 1050W Green. Win10 X64. MSI Afterburner for OC. 80 power limit, CC:+100. MC: +700. Runs at about 50 degree.

I've got lots of miners running stable. But this one works for about 3 days, then the 1060 cards fail, miner restarts, and the 2 1060 cards are gone. When it happens, the 1060 cards look fine physically, and both are fine in Device Manager, but in Afterburner, both cards are frozen without being able to do anything on them. And they are no giving any Hash either obviously. System need to be restarted for them to get fixed.

I'm hosting the system for a third party, the hardware is theirs, but I clean installed the OS, and did everything by the book. Only software issue that I can think of is, that after installing the OS and trying to run it for the first time, Claymore wouldn't start at all which was related to the OpenCL.dll file which for some reason was missing from sys32. I copied the .dll file from an identical system and put it in the miner's sys32 file.

The whole Claymore's log from when the issue seems to start:

18:41:37:870   cc4   ETH - Total Speed: 99.571 Mh/s, Total Shares: 1173, Rejected: 0, Time: 34:22
18:41:37:870   cc4   ETH: GPU0 13.016 Mh/s, GPU1 12.974 Mh/s, GPU2 13.037 Mh/s, GPU3 13.019 Mh/s, GPU4 23.765 Mh/s, GPU5 23.760 Mh/s
18:41:38:355   1738   srv_thr cnt: 1, IP: 192.168.XX.XX


WTF?  Angry
I know, right? How could people copy that huge wall of text?

A) Devil is in the details. I'm running over 25 miners with 6-8 GPUs each almost all alone by myself. Build from scratch. many different models. RX. R9. GTX, ... And I had no exp in these stuff 9 months ago. I managed to do all of this, get a perfectly stable system with little to none problems, only by paying a great deal of attention to details. So I do the courtesy to others who may want to help me, by giving them "the option" to see and read the details.

B) If you get off your high horse, you'll see that I put the important parts short and sweet in the beginning. Giving the line of error which I think is the main thing. System spec. And few lines on what's up. THEN. Only then, I wrote "the whole log file from which the problem starts". So the post is not in anyway or from defined by the log file. You can simply ignore it. You don't need to quote it. And it will take 2 sec to scroll past it.

So if you don't have anything to say, stop talking. It's not Facebook or twitter, or text messages with your bff. It's a  forum. You can expect time to time a lengthy post. And as long as it's not messy, it's perfectly fine.
newbie
Activity: 168
Merit: 0
we are currently wasting hashpower mining xvg at nlpool, as we are mining all blake2s coins there. the way i see it, if we set c=xvg, we aren't paid for mined xsh (currently, because i think this pool is not exchanging for us).

please fix it nlpool devs.
newbie
Activity: 19
Merit: 0
Can someone help me with this please...

I'm dual mining ETH+SIA on Nanopool with few nVidia cards. Eth is showing just fine but Sia is showing 0 earnings after quite some time and you can see there were some shares...

https://sia.nanopool.org/account/5682ff6799aaaae84866e9ee6167ef53644d3c4b3b7d909d4c2d9fa35dc2a512a98a3b98aaa3

Here is bat content that I got with nanopool generator:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal 0x1249d67b4cd1ae115fb2534d5cde0257d0b3ae14.kopac1/[email protected] -epsw x -dcoin sia -dpool stratum+tcp://sia-eu1.nanopool.org:7777 -dwal 5682ff6799aaaae84866e9ee6167ef53644d3c4b3b7d909d4c2d9fa35dc2a512a98a3b98aaa3/kopac1/[email protected] -dpsw x -ftime 10

First of all i dont think you should mine sia now. Anyways, I had the same problem long back ago when i mined sia, but after some days the coins appeared. Dont ask me why, but wait some more time, or contact with them.

Thank you.

I mine ZCL with my primary rig (on Suprnova) and I'm testing ETH+Sia on Nanopool with 1 card now...

Is there something else that you would recommend for dual mining?

I'm not familiarized with nvidia cards. But you should try ETH+ All coins you are interested in. For example, test Decreed, Pascal, Verge, SmartCash, etc. And see on "What to Mine" wich pair is better for your card, and for you so. My opinion only ofc Smiley

Sure will do. Thank you! Smiley
newbie
Activity: 47
Merit: 0
Can someone help me with this please...

I'm dual mining ETH+SIA on Nanopool with few nVidia cards. Eth is showing just fine but Sia is showing 0 earnings after quite some time and you can see there were some shares...

https://sia.nanopool.org/account/5682ff6799aaaae84866e9ee6167ef53644d3c4b3b7d909d4c2d9fa35dc2a512a98a3b98aaa3

Here is bat content that I got with nanopool generator:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal 0x1249d67b4cd1ae115fb2534d5cde0257d0b3ae14.kopac1/[email protected] -epsw x -dcoin sia -dpool stratum+tcp://sia-eu1.nanopool.org:7777 -dwal 5682ff6799aaaae84866e9ee6167ef53644d3c4b3b7d909d4c2d9fa35dc2a512a98a3b98aaa3/kopac1/[email protected] -dpsw x -ftime 10

First of all i dont think you should mine sia now. Anyways, I had the same problem long back ago when i mined sia, but after some days the coins appeared. Dont ask me why, but wait some more time, or contact with them.

Thank you.

I mine ZCL with my primary rig (on Suprnova) and I'm testing ETH+Sia on Nanopool with 1 card now...

Is there something else that you would recommend for dual mining?

I'm not familiarized with nvidia cards. But you should try ETH+ All coins you are interested in. For example, test Decreed, Pascal, Verge, SmartCash, etc. And see on "What to Mine" wich pair is better for your card, and for you so. My opinion only ofc Smiley
sr. member
Activity: 2142
Merit: 353
Xtreme Monster
Something I'm not understanding is that my friend is mining xvg at http://mine.nlpool.nl and the last 50 payments is showing xsh as a reward too but the wallet he is mining is for xvg only, why is showing xsh as reward while he is mining xvg, actually is showing xvg and xsh as rewards but his wallet is xvg.
newbie
Activity: 10
Merit: 0
PLEASE HELP.
I have one rx 580 OC Edition.. I boy on one men 2 rx 580 oc edition too.. My gpy give me 24,6 mh/s.. i now create rig, and gpu 2 and gpu 3 give 28.2 mh/s.. and work few minutes and restart miner or gpu 3 go down on 0 mh/s -_- i read that is becaose he OVERCLOCK that two gpu and because miner restar -_- PLEASE HELP how to restore that 2 gpu on default like my gpu?

Lol. this is some weird translation I suppose. Do lower your memory clocks to increase stability. And approach each GPU differently sometimes the difference can be confusing.
I have some 12 GPUs rigs that have same cards(all Sapphire Nitro+ 570, Elpida ) some work fine on 2075-2066 and some others on the same rig may have issues if above 1850 (although its statistically very low amount of GPUs)
Normally the minimum that you can get fro polaris is 28MH (older rx470 refs  could be even lower depending...)

The cards you have probably should be good to give 30+ stable. What's the maker of the "rx 580 OC Edition"?

The era of GPU mining SIA is GONE! If you notice the total share found on sia nanopool has been at ZERO for almost a month. Now ASICs are taking over and trust me you get nothing if continue mining.
newbie
Activity: 19
Merit: 0
Can someone help me with this please...

I'm dual mining ETH+SIA on Nanopool with few nVidia cards. Eth is showing just fine but Sia is showing 0 earnings after quite some time and you can see there were some shares...

https://sia.nanopool.org/account/5682ff6799aaaae84866e9ee6167ef53644d3c4b3b7d909d4c2d9fa35dc2a512a98a3b98aaa3

Here is bat content that I got with nanopool generator:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal 0x1249d67b4cd1ae115fb2534d5cde0257d0b3ae14.kopac1/[email protected] -epsw x -dcoin sia -dpool stratum+tcp://sia-eu1.nanopool.org:7777 -dwal 5682ff6799aaaae84866e9ee6167ef53644d3c4b3b7d909d4c2d9fa35dc2a512a98a3b98aaa3/kopac1/[email protected] -dpsw x -ftime 10

First of all i dont think you should mine sia now. Anyways, I had the same problem long back ago when i mined sia, but after some days the coins appeared. Dont ask me why, but wait some more time, or contact with them.

Thank you.

I mine ZCL with my primary rig (on Suprnova) and I'm testing ETH+Sia on Nanopool with 1 card now...

Is there something else that you would recommend for dual mining?
newbie
Activity: 47
Merit: 0
Can someone help me with this please...

I'm dual mining ETH+SIA on Nanopool with few nVidia cards. Eth is showing just fine but Sia is showing 0 earnings after quite some time and you can see there were some shares...

https://sia.nanopool.org/account/5682ff6799aaaae84866e9ee6167ef53644d3c4b3b7d909d4c2d9fa35dc2a512a98a3b98aaa3

Here is bat content that I got with nanopool generator:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal 0x1249d67b4cd1ae115fb2534d5cde0257d0b3ae14.kopac1/[email protected] -epsw x -dcoin sia -dpool stratum+tcp://sia-eu1.nanopool.org:7777 -dwal 5682ff6799aaaae84866e9ee6167ef53644d3c4b3b7d909d4c2d9fa35dc2a512a98a3b98aaa3/kopac1/[email protected] -dpsw x -ftime 10

First of all i dont think you should mine sia now. Anyways, I had the same problem long back ago when i mined sia, but after some days the coins appeared. Dont ask me why, but wait some more time, or contact with them.
newbie
Activity: 19
Merit: 0
Can someone help me with this please...

I'm dual mining ETH+SIA on Nanopool with few nVidia cards. Eth is showing just fine but Sia is showing 0 earnings after quite some time and you can see there were some shares...

https://sia.nanopool.org/account/5682ff6799aaaae84866e9ee6167ef53644d3c4b3b7d909d4c2d9fa35dc2a512a98a3b98aaa3

Here is bat content that I got with nanopool generator:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal 0x1249d67b4cd1ae115fb2534d5cde0257d0b3ae14.kopac1/[email protected] -epsw x -dcoin sia -dpool stratum+tcp://sia-eu1.nanopool.org:7777 -dwal 5682ff6799aaaae84866e9ee6167ef53644d3c4b3b7d909d4c2d9fa35dc2a512a98a3b98aaa3/kopac1/[email protected] -dpsw x -ftime 10
sr. member
Activity: 857
Merit: 262
PLEASE HELP.
I have one rx 580 OC Edition.. I boy on one men 2 rx 580 oc edition too.. My gpy give me 24,6 mh/s.. i now create rig, and gpu 2 and gpu 3 give 28.2 mh/s.. and work few minutes and restart miner or gpu 3 go down on 0 mh/s -_- i read that is becaose he OVERCLOCK that two gpu and because miner restar -_- PLEASE HELP how to restore that 2 gpu on default like my gpu?

Lol. this is some weird translation I suppose. Do lower your memory clocks to increase stability. And approach each GPU differently sometimes the difference can be confusing.
I have some 12 GPUs rigs that have same cards(all Sapphire Nitro+ 570, Elpida ) some work fine on 2075-2066 and some others on the same rig may have issues if above 1850 (although its statistically very low amount of GPUs)
Normally the minimum that you can get fro polaris is 28MH (older rx470 refs  could be even lower depending...)

The cards you have probably should be good to give 30+ stable. What's the maker of the "rx 580 OC Edition"?
newbie
Activity: 17
Merit: 0
PLEASE HELP.
I have one rx 580 OC Edition.. I boy on one men 2 rx 580 oc edition too.. My gpy give me 24,6 mh/s.. i now create rig, and gpu 2 and gpu 3 give 28.2 mh/s.. and work few minutes and restart miner or gpu 3 go down on 0 mh/s -_- i read that is becaose he OVERCLOCK that two gpu and because miner restar -_- PLEASE HELP how to restore that 2 gpu on default like my gpu?

use google translate
Jump to: