Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 506.

Ursul0

sr. member

Activity: 857

Merit: 262

@Claymore: I'm getting some weird behavior on machine where I test possibly faulty raisers see log below:
Note: sometimes I also experience the "lost from EthMan worker" issue - after some hours of work it disappears(now on v10.1) from EthMan 3.2-3.6 (while the worker itself is hashing just fine) are there any (EthMan?) logs that I can enable so I'd get some idea as to what is the problem?

2* Palit 1060 6GB :

Code:

3:37:12:659	5c0	new buf size: 0
13:37:12:659	5c0	ETH: 12/19/17-13:37:12 - New job from eu1.ethermine.org:4444
13:37:12:659	5c0	target: 0x0000000112e0be82 (diff: 4000MH), epoch 158(2.23GB)
13:37:12:659	5c0	ETH - Total Speed: 46.342 Mh/s, Total Shares: 8, Rejected: 0, Time: 00:10
13:37:12:659	5c0	ETH: GPU0 23.298 Mh/s, GPU1 23.044 Mh/s
13:37:12:659	5c0	 DCR - Total Speed: 355.287 Mh/s, Total Shares: 2, Rejected: 0
13:37:12:659	5c0	 DCR: GPU0 178.618 Mh/s, GPU1 176.669 Mh/s
13:37:14:472	1068	srv_thr cnt: 1, IP: 192.168.1.50
13:37:14:472	1068	recv: 51
13:37:14:472	1068	srv pck: 50
13:37:14:473	1068	srv bs: 0
13:37:14:473	1068	sent: 188
13:37:17:246	10b0	GPU 1, GpuMiner cu_k00 failed 4, unspecified launch failure
13:37:17:246	10b0	GPU 1, GpuMiner kx failed 1
13:37:17:262	10b4	GPU 0, GpuMiner cu_k00 failed 4, unspecified launch failure
13:37:17:262	10b4	GPU 0, GpuMiner kx failed 1
13:37:17:246	10b0	Set global fail flag, failed GPU1
13:37:17:262	10b0	GPU 1 failed
13:37:17:262	1158	GPU 1, GpuMiner cu_k00 failed 4, unspecified launch failure
13:37:17:262	1158	GPU 1, GpuMiner kx failed 1
13:37:17:262	10b4	Set global fail flag, failed GPU0
13:37:17:262	10b4	GPU 0 failed

jackbox

legendary

Activity: 1246

Merit: 1024

Quote from: cjclm7 on December 19, 2017, 09:10:46 AM

Quote from: HELIUM_COIN on December 17, 2017, 08:20:41 PM

Hello,

Trying to set up multi gpu system.

8 NVIDIA 1050's and 5 AMD RX470's on Asrock H110.

Was working well with 8+1 but after adding the last 4 the miner now hangs on startup.
Tried versions 9.7 thru 10.2, no luck.

Is there a claymore GPU limitation I am missing? All cards are installed properly in windows and patched blockchain drivers for the AMD.

The nvidia are a bit older drivers but seem to have the best luck with them for many months.(newer ones were not stable).

I tried the -gser settings but just delayed the hang.

Claymore loads the AMD cards, and them pauses, then eventually locks the entire computer.

Any ideas?

Thanks so much! Any suggestions are greatly appreciated.

most probably your PSU is not enough and it is not a GPU limit issue (Claymore limit is 32)

Most issues I have seen were due to inadequate or failing PSUs.

cjclm7

newbie

Activity: 25

Merit: 0

Quote from: HELIUM_COIN on December 17, 2017, 08:20:41 PM

Hello,

Trying to set up multi gpu system.

8 NVIDIA 1050's and 5 AMD RX470's on Asrock H110.

Was working well with 8+1 but after adding the last 4 the miner now hangs on startup.
Tried versions 9.7 thru 10.2, no luck.

Is there a claymore GPU limitation I am missing? All cards are installed properly in windows and patched blockchain drivers for the AMD.

The nvidia are a bit older drivers but seem to have the best luck with them for many months.(newer ones were not stable).

I tried the -gser settings but just delayed the hang.

Claymore loads the AMD cards, and them pauses, then eventually locks the entire computer.

Any ideas?

Thanks so much! Any suggestions are greatly appreciated.

most probably your PSU is not enough and it is not a GPU limit issue (Claymore limit is 32)

notbatman

legendary

Activity: 2212

Merit: 1038

^^^ Windows has an 8 GPU limit, use Linux.

cjclm7

newbie

Activity: 25

Merit: 0

Quote from: ozoner99 on December 17, 2017, 10:57:40 PM

Quote from: HELIUM_COIN on December 17, 2017, 08:20:41 PM

Hello,

Trying to set up multi gpu system.

8 NVIDIA 1050's and 5 AMD RX470's on Asrock H110.

Is there a claymore GPU limitation I am missing?

Yep. Claymore supports 10 GPUs max. Try running claymore for the 470s and ewbf (equihash) for the 1050s - you'll make more that way anyhow

If you read Claymore´s README file you will learn limit is 32 GPU and not 10 GPU

Ursul0

sr. member

Activity: 857

Merit: 262

Quote from: ozoner99 on December 17, 2017, 10:57:40 PM

Yep. Claymore supports 10 GPUs max. Try running claymore for the 470s and ewbf (equihash) for the 1050s - you'll make more that way anyhow

This is factually wrong. . Claymore supports more then 10 GPUs obviously as most of my rigs have 12.

kenbeannet

newbie

Activity: 17

Merit: 0

From what I have read (After 60 pages), I cannot seem to find any answer on the error "GPU#X Got Incorrect Share". Can anyone explain how to resolve this? I have been lowering MEMORY clocks slowly, but they dont seem to be disappearing.

Thanks!

notbatman

legendary

Activity: 2212

Merit: 1038

Quote from: preda on December 19, 2017, 07:17:53 AM

who can help me?
i own 18x 1060 3gb

i always mined eth or whatever ethash alghorytm with this cards

lately about 20 days or so.. i get big drops hashrates why?

i have 4 rigs and all do the same i tried with overclock, stock, low overclock, changing drivers, i treid all, but i get big drops.

1 rig does 143mh (24.7mh *6) about, every 1 or 2 minutes claymore say 80mh and the cards show they are doing 13mh why? this happen with 4 rigs and never happened before there i s some reason of this?
in the pool i cant see a constant hashrate but high and low hashrate.
thanks who can help me

Double up the PSUs on one of the rigs and see if that stops it, PSU & GPU power efficiency can drop significantly as they age.

preda

sr. member

Activity: 756

Merit: 250

who can help me?
i own 18x 1060 3gb

i always mined eth or whatever ethash alghorytm with this cards

lately about 20 days or so.. i get big drops hashrates why?

i have 4 rigs and all do the same i tried with overclock, stock, low overclock, changing drivers, i treid all, but i get big drops.

1 rig does 143mh (24.7mh *6) about, every 1 or 2 minutes claymore say 80mh and the cards show they are doing 13mh why? this happen with 4 rigs and never happened before there i s some reason of this?
in the pool i cant see a constant hashrate but high and low hashrate.
thanks who can help me

Gunna01

sr. member

Activity: 306

Merit: 251

Quote from: deadsix on December 19, 2017, 01:43:33 AM

Quote from: Gunna01 on December 18, 2017, 08:12:51 PM

Any chance of dual mining eth and cryptonight?

You dont understand what dual mining does, or what kind of algos are clubbed together, do you?

Obviously note based in your response

Demarsac

sr. member

Activity: 504

Merit: 272

Quote from: TODO4EVER on December 18, 2017, 06:53:54 PM

Hello I haven't been mining for few months now and I would like to know is this now normal for 2 rx 480 ?

I used to have 51.5 Eth and 1750 Dcr
I'm currently using the latest adrenaline driver.
Switched back to 16.12.2 and it is the same issue
Tried different versions of the miner & even the old one that I used to use.
The speed is constant across all the tries I mentioned above.

Thanks in advance.

Hi my friend
You need different drivers. (The blockchain ones)
That solve this drop rate. You will be back at your original hashrates once you put these drivers

deadsix

hero member

Activity: 751

Merit: 517

Fail to plan, and you plan to fail.

Quote from: Gunna01 on December 18, 2017, 08:12:51 PM

Any chance of dual mining eth and cryptonight?

You dont understand what dual mining does, or what kind of algos are clubbed together, do you?

Rickirs

member

Activity: 206

Merit: 20

Quote from: leonix007 on December 18, 2017, 06:49:23 PM

Quote from: evlo on December 18, 2017, 05:39:11 PM

OC settings does not work with 17.50 (17.12)

I did not found any other utility that can set OC for AMD graphic cards from commandline in windows (or linux)

try 17.11, Claymore stated that 17.12.1 drivers broke some miners management, might also be in OC settings

https://bitcointalk.org/index.php?topic=1433925.18400

He said its temperature and fan thing, I don't think OC thing are also affected.

Gunna01

sr. member

Activity: 306

Merit: 251

Any chance of dual mining eth and cryptonight?

bluspirit

jr. member

Activity: 70

Merit: 3

Quote from: clems on December 18, 2017, 04:33:31 AM

DevFee: XMR: Stratum - connecting to 'xmr.suprnova.cc' <145.239.65.23> port 5222
Connection timeout.

And when I check

nmap -p 5222 xmr.suprnova.cc -Pn

Starting Nmap 7.60 ( https://nmap.org ) at 2017-12-18 10:32 CET
Nmap scan report for xmr.suprnova.cc (145.239.65.23)
Host is up (0.028s latency).
rDNS record for 145.239.65.23: fr-db6b.suprnova.cc

PORT STATE SERVICE
5222/tcp open xmpp-client

Someone have this error?

You are off topic.
Anyway that pool seems currently offline

TODO4EVER

newbie

Activity: 1

Merit: 0

Hello I haven't been mining for few months now and I would like to know is this now normal for 2 rx 480 ?

https://i.imgur.com/V1B5nIq.png

I used to have 51.5 Eth and 1750 Dcr
I'm currently using the latest adrenaline driver.
Switched back to 16.12.2 and it is the same issue
Tried different versions of the miner & even the old one that I used to use.
The speed is constant across all the tries I mentioned above.

Thanks in advance.

leonix007

sr. member

Activity: 1008

Merit: 297

Grow with community

Quote from: evlo on December 18, 2017, 05:39:11 PM

OC settings does not work with 17.50 (17.12)

I did not found any other utility that can set OC for AMD graphic cards from commandline in windows (or linux)

try 17.11, Claymore stated that 17.12.1 drivers broke some miners management, might also be in OC settings

https://bitcointalk.org/index.php?topic=1433925.18400

evlo

jr. member

Activity: 155

Merit: 4

OC settings does not work with 17.50 (17.12)

I did not found any other utility that can set OC for AMD graphic cards from commandline in windows (or linux)

shap00

newbie

Activity: 54

Merit: 0

hi guys! i have a problem. My claymore's monitor works fine for the first rig, but when i try to add the second rig, it shows my the first rig again. i rechecked the steps with no effect. i allowed ethdcrminer64 in inbound rules, set static internal private ip adress to every computer, made the port forwarding. can somebody help me please?

vladimir4504

newbie

Activity: 10

Merit: 0

Quote from: xs2k on December 18, 2017, 08:36:10 AM

Still on version 9.6 with 1070s without any issues. Is the 10.2 worth upgrading? Speed improvements?

i changed into 10.2, 30x1070 g1 gaming, eth+pascal, 9.6 was pretty stable with some resets during the month, one-twice per rig. lets see 10.2

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 506. (Read 6590757 times)