Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 530.

PB_SilentMiner

newbie

Activity: 36

Merit: 0

Quote from: Tomee on November 21, 2017, 10:18:00 AM

Quote from: DasBoom on November 20, 2017, 11:36:45 AM

Quote from: DasBoom on November 19, 2017, 05:26:16 PM

Quote from: PB_SilentMiner on November 19, 2017, 04:28:34 PM

Quote from: iRrromka on November 19, 2017, 03:57:55 PM

Quote from: DasBoom on November 19, 2017, 12:27:30 PM

Hi there I started using Claymore's v10.1 yesterday,since then my hash rate has remained the same
but stale shares have trippled.I started with the same settings I used with v10.0 and have tried tweaking
GPU settings and the like but my stale shares are still tripple that of v10.0. Has anyone else come across this issue?
Should/Can I just use v10.0 instead?

I've noticed the same problem on Clay 10.1, even more than 20% of stale shares with Ethermine eu1.

Rebooting everyday...

I've seen the same, switched to eu2.ethermine.org, and has been fine for last 3 weeks, been getting between 2-5% stale.

Then suddenly it shot up to 15-20% Stale, so switched to us1.ethermine.org, seems to be stable for last 48 hours, back to 3% stale.

Thanks for the help,I'll give it a try asap and post the result soon good or bad.

I had no luck switching pools so I have just switched back to v10.0,I'll let it run a few hours hopefully
its the answer.

I take my last comment back, didn't last long. WTF is going on with ethermine lately?

Has anyone experienced issues with other pools?

opies32765

member

Activity: 88

Merit: 16

Guys

I have a strange issue with one of my rigs that i cannot figure out. I currently have 13 rigs but for some reason this one has been an issue for me

8 sapphire 570's modded 1500+ straps using PBE 1.6.3
asus z270-a
8gb ddr 4

2 EVGA G3 850's and 2 server PSU's

Im using claymore 10 and have used 10.1 ..using the latest amd drivers with compute turned on.

Windows 10 1703 build just like all my other rigs

the issue is that whenever i change any voltage settings in claymore and i reboot the computer the miner locks up the computer after it initializes the open cl...

once it locks up reboot it again and the hashrate is back at stock...reboot again and then starts working ok

another issue is that every minute or so i get a random card that drops the hashrate...2-3 hashes

ive tried lowering the clocks and slowly raising them but no luck

I have changed out the mobo, the DDR, the pci risers...currently i have 3200 watts available to it so i know its not a power issue....

Any help would be appreciated

greatauror28

full member

Activity: 181

Merit: 101

Ethereum Miner

Quote from: illanz on November 21, 2017, 06:25:58 AM

Quote from: illanz on November 19, 2017, 04:11:47 AM

Is Ths normal to have this green GPU recap at every round...?? Huh

Very annoying. Gow can I get rid of it ?

Please someone answer

thanks

No.

Personally, I only see that when I start Claymore and it is initializing.

vx0713

newbie

Activity: 46

Merit: 0

Quote from: Ursul0 on November 21, 2017, 03:21:12 PM

Quote from: vx0713 on November 21, 2017, 08:58:33 AM

OK, so I have a mixed GPU minning rig, with 3x 1060 and 3x 1070.

Is it OK, to start 2 instances of claymore, one with dual mining on the GTX 1070 and one with solo mining for the 1060s ?

(right now I'm limited by my PSU, and it won't handle 6GPU in dual mining mode)

you can do better than that.
for example the following will disable dual mining for GPUs 0,1,2 :

-mode 1-012

thanks much appreciated!

BSAlex

member

Activity: 239

Merit: 10

Got a strange issue with Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v10.1 (Windows 8.1 64 bit). ASUS GTX STRIX 970 video. After DAG generation I am getting two types of hashrate - around 10MH/s or about 23 MH/s Hashrate variation also apply to other coin, with the same 2x drop of hashrate. If miner begin to run with a rate I can modify it applying OC for core and memory, but no more then 15%, for example from 9MH/s with stock clock to 10,5 MH/s with stable maximum OC. It did non depend on P0 state activated - actually, I start to activate it when I find the problem. The miner is run via NHML 1.8.1.5 algo aggregator. Please advise how to troubleshoot.

Ursul0

sr. member

Activity: 857

Merit: 262

Quote from: vx0713 on November 21, 2017, 08:58:33 AM

OK, so I have a mixed GPU minning rig, with 3x 1060 and 3x 1070.

Is it OK, to start 2 instances of claymore, one with dual mining on the GTX 1070 and one with solo mining for the 1060s ?

(right now I'm limited by my PSU, and it won't handle 6GPU in dual mining mode)

you can do better than that.
for example the following will disable dual mining for GPUs 0,1,2 :

-mode 1-012

Tomee

newbie

Activity: 11

Merit: 0

Quote from: DasBoom on November 20, 2017, 11:36:45 AM

Quote from: DasBoom on November 19, 2017, 05:26:16 PM

Quote from: PB_SilentMiner on November 19, 2017, 04:28:34 PM

Quote from: iRrromka on November 19, 2017, 03:57:55 PM

Quote from: DasBoom on November 19, 2017, 12:27:30 PM

Hi there I started using Claymore's v10.1 yesterday,since then my hash rate has remained the same
but stale shares have trippled.I started with the same settings I used with v10.0 and have tried tweaking
GPU settings and the like but my stale shares are still tripple that of v10.0. Has anyone else come across this issue?
Should/Can I just use v10.0 instead?

I've noticed the same problem on Clay 10.1, even more than 20% of stale shares with Ethermine eu1.

Rebooting everyday...

I've seen the same, switched to eu2.ethermine.org, and has been fine for last 3 weeks, been getting between 2-5% stale.

Then suddenly it shot up to 15-20% Stale, so switched to us1.ethermine.org, seems to be stable for last 48 hours, back to 3% stale.

Thanks for the help,I'll give it a try asap and post the result soon good or bad.

I had no luck switching pools so I have just switched back to v10.0,I'll let it run a few hours hopefully
its the answer.

tg88

legendary

Activity: 2492

Merit: 1429

Payment Gateway Allows Recurring Payments

Quote from: illanz on November 21, 2017, 06:25:58 AM

Quote from: illanz on November 19, 2017, 04:11:47 AM

Is Ths normal to have this green GPU recap at every round...?? Huh

Very annoying. Gow can I get rid of it ?

Please someone answer

thanks

post here your command line to analyze better.

vx0713

newbie

Activity: 46

Merit: 0

OK, so I have a mixed GPU minning rig, with 3x 1060 and 3x 1070.

Is it OK, to start 2 instances of claymore, one with dual mining on the GTX 1070 and one with solo mining for the 1060s ?

(right now I'm limited by my PSU, and it won't handle 6GPU in dual mining mode)

illanz

newbie

Activity: 40

Merit: 0

Quote from: illanz on November 19, 2017, 04:11:47 AM

Is Ths normal to have this green GPU recap at every round...?? Huh

Very annoying. Gow can I get rid of it ?

http://illanz.free.fr/eth.jpg

Please someone answer

thanks

leonix007

sr. member

Activity: 1008

Merit: 297

Grow with community

Quote from: titan01 on November 21, 2017, 02:52:50 AM

this software can work under Win10? i try to run bat file but seems not work.

Yes, its working, post your hardware specs and config to help you out, or any errors seen?

Yohow

member

Activity: 66

Merit: 10

Quote from: titan01 on November 21, 2017, 02:52:50 AM

this software can work under Win10? i try to run bat file but seems not work.

Deactivate Antivirus

titan01

newbie

Activity: 1

Merit: 0

this software can work under Win10? i try to run bat file but seems not work.

DasBoom

newbie

Activity: 5

Merit: 0

Quote from: DasBoom on November 20, 2017, 11:36:45 AM

Quote from: DasBoom on November 19, 2017, 05:26:16 PM

Quote from: PB_SilentMiner on November 19, 2017, 04:28:34 PM

Quote from: iRrromka on November 19, 2017, 03:57:55 PM

Quote from: DasBoom on November 19, 2017, 12:27:30 PM

Hi there I started using Claymore's v10.1 yesterday,since then my hash rate has remained the same
but stale shares have trippled.I started with the same settings I used with v10.0 and have tried tweaking
GPU settings and the like but my stale shares are still tripple that of v10.0. Has anyone else come across this issue?
Should/Can I just use v10.0 instead?

I've noticed the same problem on Clay 10.1, even more than 20% of stale shares with Ethermine eu1.

Rebooting everyday...

I've seen the same, switched to eu2.ethermine.org, and has been fine for last 3 weeks, been getting between 2-5% stale.

Then suddenly it shot up to 15-20% Stale, so switched to us1.ethermine.org, seems to be stable for last 48 hours, back to 3% stale.

Thanks for the help,I'll give it a try asap and post the result soon good or bad.

I had no luck switching pools so I have just switched back to v10.0,I'll let it run a few hours hopefully
its the answer.

I've been running on v10.0 for 9hrs now stale shares instantly returned to an acceptable rate.
I'm mining ethereum only mode for the record. I'm running 2x 1050 ti on this rig does anyone know
if the cause is specifically an nvidia card issue,or a teething trouble with v10.1?

fgm

newbie

Activity: 43

Merit: 0

Hey Claymore, please implement hostname in Ethman instead of ip. It's simpler with dhcp ip assignment.

DasBoom

newbie

Activity: 5

Merit: 0

Quote from: DasBoom on November 19, 2017, 05:26:16 PM

Quote from: PB_SilentMiner on November 19, 2017, 04:28:34 PM

Quote from: iRrromka on November 19, 2017, 03:57:55 PM

Quote from: DasBoom on November 19, 2017, 12:27:30 PM

Hi there I started using Claymore's v10.1 yesterday,since then my hash rate has remained the same
but stale shares have trippled.I started with the same settings I used with v10.0 and have tried tweaking
GPU settings and the like but my stale shares are still tripple that of v10.0. Has anyone else come across this issue?
Should/Can I just use v10.0 instead?

I've noticed the same problem on Clay 10.1, even more than 20% of stale shares with Ethermine eu1.

Rebooting everyday...

I've seen the same, switched to eu2.ethermine.org, and has been fine for last 3 weeks, been getting between 2-5% stale.

Then suddenly it shot up to 15-20% Stale, so switched to us1.ethermine.org, seems to be stable for last 48 hours, back to 3% stale.

Thanks for the help,I'll give it a try asap and post the result soon good or bad.

I had no luck switching pools so I have just switched back to v10.0,I'll let it run a few hours hopefully
its the answer.

TigTex

jr. member

Activity: 55

Merit: 5

Quote from: Marcosgarcia999 on November 19, 2017, 10:34:51 PM

I have claymore dual v. 10.1 and RTH+decred. I want to kwon what think us that is best: ETH+Decred? ETH+Sia? ETH+Lbry?
My gpu is only one gtx 1060
Thanks!

Take a look here: https://whattomine.com/calculators

You have calculators for those 3 coins that you said. Test and see what gives you the best profit.
Spoiler: it's eth+decred

ZUBR64

newbie

Activity: 9

Merit: 0

Hi.
Its real to support dual keccak+dagger-hashimoto mod?

JustMan

newbie

Activity: 1

Merit: 0

Thanks for your work!

pehoko

full member

Activity: 232

Merit: 100

Why v10.1 is much slower than v6.0? In my case this is about 20%.

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 530. (Read 6590565 times)