Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 532. (Read 6590757 times)

I'm new to mining, I have one rig running 6 rx580s. I noticed restarts caused by the devfee being unreachable. I added the nofee switch and mined for 24 hrs nonstop. I'm using simplemining and these are my current settings:

-wd 1 -r 1 -epool stratum+tcp://eth-us.dwarfpool.com:8008 -ewal $walletETH/$rigName -esm 0 -epsw x -allpools 1 -mport -3333 -asm 1 -mode 1

It's trying to go to us1.ethermine.org and can't get there.

https://image.ibb.co/buhLxm/miner_rebooting.png

Is there something I missed?

Thank you.

I'm using a palit gtx1070 jetstream. Motherboard is biostar tb250-btc pro.
I tried to direct the gpu on the motherboard without using a riser. 

I uninstalled then installed the driver and here is the thing it would run smoothly both at default and at oc settings.  But the problem is when I shut it down or there is a power outage because when I turn it on again, the miner would crash after one hour and I had to do the same thing over again.

Hi there

How to set core and memory clock in linux? I think it's not working. I have "./ethdcrminer64 -cclock 1200 -mclock 2000 (...)" in start.bash and I am getting only 11.8 Mh/s with a Radeon 560, which is comparable to default clocks in windows (got 13.3 with 1200 core / 2000 memory)

Then again, I copied into a script

And I see core 1300 Mhz and memory 1750 Mhz....

How to change core and mem clock?

Thanks.

Hello,
I use the 470 (modded Bios - Timings / VCC Offset) with claymore 9.7 i get 27,5 MHS before the DAG file Problem.
now i get with Claymore 10.1 only 24,5 MHS - with the lattest driver and with the driver von 23.8 -> what driver do you use for BIOS modded AMD GPUS (Driversetting) to get again the 27,5 MHS?


thx lg Martin

Is Ths normal to have this green GPU recap at every round...??  
Very annoying. Gow can I get rid of it ?

http://illanz.free.fr/eth.jpg

ever heard of static ips? you can easily fix this issue yourself

Dear Claymore!
Is it possible to add to remote monitor possibility to understand computer's names instead of IP?
It will be usefull for many admins.
For example, I have to control about 140 rigs. Time to time, IP-adresses of rigs are changed by DHCP.
So, 1 or 2 times a  week I need to reconfigure remote monitoring.  
It's really terrible job!  

Thank you in advance!

I am using Win 7, I didnt bother looking into anything, I just Reinstalled Windows, it is all running again will see if it works out. Will update in another 24hours if it continues to run ok

(Pssssst equihash etc)

To anyone whose rigs started freezing and crashing recently - just check your Windows update logs, especially on Win 10.
You can use Win 10 Spy Disabler to optimize Windows and disable unnecessary features.

Yes this is what you should use until the latest drivers with compute mode is less buggy.

will this do?

http://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-Blockchain-Compute-Release-Notes.aspx

what's weird is im mining other coins at max hash rate, it's only etc that dips bad.

Use amd blockchain drivers from 23 August or if you Use latest version of Windows 10 give a try to latest relive drivers with compute mode enabled.

Wondering if anyone can shed some light on my issue, im switching over to ETC and ive always used claymore.

my nvidia 1060 rigg pushes out the same hash rate 24.5 per card, my amds all went from 29.5 to 19.5. any idea what it can be?

Yeah right... and gift them for 50 euros each in the second hand market after some months that 3GB won't be enough for dag files....

BONUS with 1060 3GB option: Crappy Hynix memory chips averaging 18MH/s....

I have pretty much the exact same issue. I have a rig with mixed GPU's has been chugging away for the last 2 months fine then beginning of the past week crashed, for me though however when I looked at it the Nvidia cards were not being detected and Afterburner could no longer edit the amd cards settings. I reinstalled both amd and nvidia drivers but same results after about 10 minutes. I even removed the Nvidia cards and still no luck. I am gonna take some time this weekend and do a fresh install of windows and cross my fingers. Currently down 4 of 10 cards cause of this

Can we get power consumption per card added to the api??

Try to add loop in start.bat
Something like this
____________________
:loop

EthDcrminer64

goto loop
____________________

I'll move all pool info from config.txt to epool.txt
Don't know if the last is necessary but it is make sence to keep it one place.

Can anybody help me out with  Claymore setup, with restart option?
Some times i chech my rig and it is on standby. Miner is closed. In logs it is trying to reach pool but after 2-3 tryes it just closes because cannot reach pool.

So these Are my parameters in v10.1
i use config file insted of start.bat for settings.

So this is config file:

-epool eu1.ethermine.org:4444
-ewal 0x15bc7702a8ed2710544e5e6c2e85cf2edd335938
-epsw x
-ethi 16
-mode 1
-tstop 70
-wd 1
-r >60
-mport 0

this is epool file:

 POOL: eu1.ethermine.org:14444, WALLET: 0x5704af0e1da22632410254948fd0c794037f3ccb, PSW: x, ESM: 0, ALLPOOLS: 0
 POOL: us1.ethermine.org:4444, WALLET: 0x5704af0e1da22632410254948fd0c794037f3ccb, PSW: x, ESM: 1, ALLPOOLS: 0
 POOL: us1.ethermine.org:14444, WALLET: 0x5704af0e1da22632410254948fd0c794037f3ccb, PSW: x, ESM: 1, ALLPOOLS: 0
 POOL: us2.ethermine.org:4444, WALLET: 0x5704af0e1da22632410254948fd0c794037f3ccb, PSW: x, ESM: 1, ALLPOOLS: 0
 POOL: us2.ethermine.org:14444, WALLET: 0x5704af0e1da22632410254948fd0c794037f3ccb, PSW: x, ESM: 1, ALLPOOLS: 0
 POOL: asia1.ethermine.org:4444, WALLET: 0x5704af0e1da22632410254948fd0c794037f3ccb, PSW: x, ESM: 1, ALLPOOLS: 0
 POOL: asia1.ethermine.org:14444, WALLET: 0x5704af0e1da22632410254948fd0c794037f3ccb, PSW: x, ESM: 1, ALLPOOLS: 0


I need miner to:
1) Restart incase any problems.
2) switch to epools file for alternative pool adress.

Looks like im missing something. I cant understand how to set it up. I read Readme dozens of times still cant make it work.