Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 628. (Read 6590565 times)

Anyone can say if the hashrate of 470s are better with 10 version?
Anyway very thanks to Dev

Can anyone report hashrate of eth + lbc mode on r9 fury/fury x or nano ? Thanks

I tried the new version , speed not change ; try to runing now

What's your eth+lbc hashrate? ( rx 480 ?

Metroid,
Clocks, voltages and voltage offset are hardcoded in videocards bioses, so videocards are mining with their "default" settings both before and after reconnect.
Only hashrate drops, all settings remain the same.

It seems, when there is a reconnect, the settings are back to default and so the voltage, reason why such low hashrate. Disable reconnect and make a way around it.

You must work hard to spot the problem and fix it, being a miner is not easy. Although I'm not a miner, the knowledge I have is common sense of how a system must work, so do your best, you can fix this easily on your own.

This problem is still reproducible with CDM v10.0 and the same blockchain driver.
Rigs with 16.7.3 driver works well for 500+ hours.

Normal hashrate:
00:26:41:263   12ac   ETH - Total Speed: 157.527 Mh/s, Total Shares: 269, Rejected: 0, Time: 01:38
00:26:41:278   12ac   ETH: GPU0 26.059 Mh/s, GPU1 26.316 Mh/s, GPU2 26.297 Mh/s, GPU3 26.301 Mh/s, GPU4 26.260 Mh/s, GPU5 26.293 Mh/s
00:26:41:278   12ac    DCR - Total Speed: 4410.745 Mh/s, Total Shares: 810, Rejected: 14
00:26:41:310   12ac    DCR: GPU0 729.664 Mh/s, GPU1 736.848 Mh/s, GPU2 736.329 Mh/s, GPU3 736.429 Mh/s, GPU4 735.283 Mh/s, GPU5 736.192 Mh/s

Then miner looses connection to pool:
00:31:41:744   12ac   Socket was closed remotely (by pool)
00:31:41:744   12ac   ETH: Connection lost, retry in 20 sec...
00:31:42:009   1210   Socket was closed remotely (by pool)
00:31:42:025   1210    DCR: Connection lost, retry in 20 sec...

After reconnection hashrate is ~2x lower:
00:33:03:981   12ac   ETH - Total Speed: 70.921 Mh/s, Total Shares: 293, Rejected: 0, Time: 01:44
00:33:03:997   12ac   ETH: GPU0 16.093 Mh/s, GPU1 11.812 Mh/s, GPU2 11.813 Mh/s, GPU3 11.818 Mh/s, GPU4 11.796 Mh/s, GPU5 7.589 Mh/s
00:33:04:044   12ac    DCR - Total Speed: 1985.794 Mh/s, Total Shares: 855, Rejected: 14
00:33:04:060   12ac    DCR: GPU0 450.611 Mh/s, GPU1 330.748 Mh/s, GPU2 330.755 Mh/s, GPU3 330.902 Mh/s, GPU4 330.287 Mh/s, GPU5 212.491 Mh/s
...
after 9 hours nothing changes, hashrate is still low:
09:09:49:724   12ac   ETH - Total Speed: 72.822 Mh/s, Total Shares: 1865, Rejected: 1, Time: 10:21
09:09:49:724   12ac   ETH: GPU0 19.089 Mh/s, GPU1 10.880 Mh/s, GPU2 11.818 Mh/s, GPU3 11.818 Mh/s, GPU4 11.811 Mh/s, GPU5 7.406 Mh/s
09:09:49:739   12ac    DCR - Total Speed: 2039.024 Mh/s, Total Shares: 4561, Rejected: 71
09:09:49:739   12ac    DCR: GPU0 534.490 Mh/s, GPU1 304.646 Mh/s, GPU2 330.906 Mh/s, GPU3 330.900 Mh/s, GPU4 330.707 Mh/s, GPU5 207.375 Mh/s

Does anyone have the same problem?

I'm quite new to mining, but isn't it a huge No-no to put anything than stock to 1625?
No one ever mines at that frequency, so it should always have a safe stock timings, so card can work after PC restart.

What card is this?

Ooops yeah I meant the pixel clock patcher.

https://s26.postimg.org/czq3avjt5/claymore10.png

Stable on 30 MH/s with Claymore v 10 + AMD Blockchain driver + Win 10. Thank you Claymore.

Do you mean atiwinflash or atikmdag-patcher?

You probably forgot to run atiwinflash.

RX480, Windows 10, Blockchain driver

Hashrate(ETH+DCR) - 30.5mhs/917mhs
CClock 1200, MClock 2070
Power Draw(GPUZ) - 104W

Underclock works now. Great work Claymore.

I knew someone would say that lol I was however able to flash my factory bios settings, so I must be flashing properly.

Hey man no offense,  but if you can't even figure out how to extract Claymore from the .rar file first befor you use it then you shouldnt be attempting to flash your BIOS. 

I tried to change my timing by copying and pasting the 1500 in to the 1625 1750 2000. I followed instructions perfectly using https://www.youtube.com/watch?v=OP_zSP2H6ho. After flashing, I get this message "No AMD graphics driver is installed, or the AMD driver is not functioning properly. Please install the AMD driver appropriate for your AMD hardware." I had to flash my old bios settings to get it working again.

Thank you for this new release!

Added Claymore Dual v10 to EthControl listing (https://ethmonitoring.com)

HAHAaa! Thanks, Will I make more with claymore than nicehash? 2 rx 470's, both are running at around 20 mh/s.