Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 630.

Mapuo

hero member

Activity: 910

Merit: 1002

Quote from: TigTex on September 01, 2017, 02:53:46 PM

Quote from: platitude on September 01, 2017, 01:59:49 PM

Try to set 840 for example and tell us if it works, cause it looks like I had the same issue. I mean check wich card is showing you wrong voltage and set separatelyfor each card with comma, like: 840,870,870,870,870
--- Update: I've set 848 value only and it works for me, try to decrease the value. ~~Also it look's like the problem with values setting is there and you need to restart the miner every time~~ Fixed: too much undervolt

Done that, anything below 0.9v is ignored and 0.912 is used instead. I'll wait for more feedback on this.

Yes, voltage control still not working properly.

TigTex

jr. member

Activity: 55

Merit: 5

Quote from: platitude on September 01, 2017, 01:59:49 PM

Try to set 840 for example and tell us if it works, cause it looks like I had the same issue. I mean check wich card is showing you wrong voltage and set separatelyfor each card with comma, like: 840,870,870,870,870
--- Update: I've set 848 value only and it works for me, try to decrease the value. ~~Also it look's like the problem with values setting is there and you need to restart the miner every time~~ Fixed: too much undervolt

Done that, anything below 0.9v is ignored and 0.912 is used instead. I'll wait for more feedback on this.

platitude

member

Activity: 103

Merit: 10

Quote from: SummersideGuy on September 01, 2017, 02:35:04 PM

I would be interested i knowing what people are getting with the 10.0 update for LBR with their 470,570,580, and 560 RX cards when dual mining

30.4mh/s LBC - Sapphire RX580 Pulse 4GB

Xdragon

hero member

Activity: 543

Merit: 500

And what about GTX 1080 ti, is it any good at dual ETH+LBC?

rednoW

legendary

Activity: 1510

Merit: 1003

Quote from: SummersideGuy on September 01, 2017, 02:35:04 PM

I would be interested i knowing what people are getting with the 10.0 update for LBR with their 470,570,580, and 560 RX cards when dual mining

30.5mh eth + 90lbry with my sapphire nitro+ rx480 1170/[email protected]

SummersideGuy

sr. member

Activity: 518

Merit: 250

I am a meat Popsicle

I would be interested i knowing what people are getting with the 10.0 update for LBR with their 470,570,580, and 560 RX cards when dual mining

NavyCuda

member

Activity: 107

Merit: 10

Quote from: rednoW on September 01, 2017, 02:02:50 PM

Quote from: Shnikes101 on September 01, 2017, 01:48:07 PM

Quote from: rednoW on September 01, 2017, 01:38:14 PM

40mh eth + 290mh lbry )) vega64 liquid

Beta Mining Drivers or 17.8.2?

On 17.8.2 I'm at 36 mh eth + 220mh lbc.

May have to switch back over and try the other drivers

17.8.2, clocks 1500/1080@1v, consumption is huge - 360watt
also can do 1340/[email protected]. 38.2eth+250lbry with 280-300watt

I don't understand why some of you run your core clock so high on Vega.

Vega FE will do 41Mh/s with a core clock of 852MHZ and 1100MHZ HBM2. Since I need -cvddc set to 1000mV with the block chain drivers, I run a core clock of 1137MHZ, that gets me 42.1Mh/s. Get over 1200 and Vega really starts to warm up. With the FE pro beta drivers I could run -cvddc at 950. I noticed that setting -cvddc too low will effect the HBM2 overclock.

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: spyshagg on September 01, 2017, 12:50:57 PM

@claymore
9.4 works fine. Exactly the same batch file. Did something change?

I change something all the time, but it works for all, so you should look for the reason in your environment: installed software or internet connection.

Quote from: wOvAN on September 01, 2017, 02:04:24 PM

v10 still not working on win 7 blockchain driver

Blockchain drivers for Win7 are broken.

Quote from: rednoW on September 01, 2017, 01:38:14 PM

40mh eth + 290mh lbry )) vega64 liquid

LBC has good speed finally. Also in ETH-only mode I get >44MH at 1100MHz memory (air cooled Vega 64). The only problem with Vega is huge power consumption. And buggy ADL, but this problem is related to several cards.

wOvAN

jr. member

Activity: 41

Merit: 3

Quote from: rednoW on September 01, 2017, 02:14:51 PM

Quote from: wOvAN on September 01, 2017, 02:04:24 PM

v10 still not working on win 7 blockchain driver

use robinhood drivers under win7

yes, but they not seem to be able to do any undervolt with v10

rednoW

legendary

Activity: 1510

Merit: 1003

Quote from: wOvAN on September 01, 2017, 02:04:24 PM

v10 still not working on win 7 blockchain driver

use robinhood drivers under win7

wOvAN

jr. member

Activity: 41

Merit: 3

v10 still not working on win 7 blockchain driver

rednoW

legendary

Activity: 1510

Merit: 1003

Quote from: Shnikes101 on September 01, 2017, 01:48:07 PM

Quote from: rednoW on September 01, 2017, 01:38:14 PM

40mh eth + 290mh lbry )) vega64 liquid

Beta Mining Drivers or 17.8.2?

On 17.8.2 I'm at 36 mh eth + 220mh lbc.

May have to switch back over and try the other drivers

17.8.2, clocks 1500/1080@1v, consumption is huge - 360watt
also can do 1340/[email protected]. 38.2eth+250lbry with 280-300watt

platitude

member

Activity: 103

Merit: 10

Quote from: TigTex on September 01, 2017, 01:40:13 PM

Just leaving feedback here on the version 10.0

Using 5x RX580 and the amd blockchain driver from 23rd august, it's now possible to parcially control the voltage.

I had my voltage set at 0.875v but the driver ignores and it sets 0.912 as the minimum. If I set 0.800, it still selects 0.912v.
So this means that I have an increase in power consuption. My 5 gpu rig now uses 120w more power.

So, if you have this 0.912v limit as I have, don't use a low core clock because with 0.912 you can do near 1300mhz stable (rx 580 sapphire pulse)
With that extra core speed, make sure that you increase the DCRI value so that the second coin uses the full extra MHz for maximum efficiency.

Before: ETH 144MHs DCR 4700MHs (at 1200mhz 0.875v) +/- 840w
Now: ETH 150MHs DCR 5750MHs (at 1300mhz 0.912v) +/- 960w

Because I pay 0.17€/kW, it's almost not worth the extra speed vs power consuption.

Please reply if you also can't set the voltage any lower than 0.9v

Try to set 840 for example and tell us if it works, cause it looks like I had the same issue. I mean check wich card is showing you wrong voltage and set separatelyfor each card with comma, like: 840,870,870,870,870
--- Update: I've set 848 value only and it works for me, try to decrease the value. Also it look's like the problem with values setting is there and you need to restart the miner every time

Shnikes101

full member

Activity: 254

Merit: 109

Quote from: rednoW on September 01, 2017, 01:38:14 PM

40mh eth + 290mh lbry )) vega64 liquid

Beta Mining Drivers or 17.8.2?

On 17.8.2 I'm at 36 mh eth + 220mh lbc.

May have to switch back over and try the other drivers

z0n0

legendary

Activity: 1274

Merit: 1006

Any speed improvements with GTX 1060?

TigTex

jr. member

Activity: 55

Merit: 5

Just leaving feedback here on the version 10.0

Using 5x RX580 and the amd blockchain driver from 23rd august, it's now possible to parcially control the voltage.

I had my voltage set at 0.875v but the driver ignores and it sets 0.912 as the minimum. If I set 0.800, it still selects 0.912v.
So this means that I have an increase in power consuption. My 5 gpu rig now uses 120w more power.

So, if you have this 0.912v limit as I have, don't use a low core clock because with 0.912 you can do near 1300mhz stable (rx 580 sapphire pulse)
With that extra core speed, make sure that you increase the DCRI value so that the second coin uses the full extra MHz for maximum efficiency.

Before: ETH 144MHs DCR 4700MHs (at 1200mhz 0.875v) +/- 840w
Now: ETH 150MHs DCR 5750MHs (at 1300mhz 0.912v) +/- 960w

Because I pay 0.17€/kW, it's almost not worth the extra speed vs power consuption.

Please reply if you also can't set the voltage any lower than 0.9v

rednoW

legendary

Activity: 1510

Merit: 1003

40mh eth + 290mh lbry )) vega64 liquid

platitude

member

Activity: 103

Merit: 10

Win 10, Sapphire RX580 Pulse 4GB cards, Blockchain drivers(23 Aug) installed, Claymore v10.0 is crashing from time to time, after crash I need to restart BAT file, because of hashrate drop. Waiting for a fix or new version

Quote

22:38:44:695   14f4   watchdog - thread 2 (gpu1), hb time 85609
22:38:44:695   14f4   WATCHDOG: GPU 1 hangs in OpenCL call, exit
22:38:44:696   14f4   watchdog - thread 3 (gpu1), hb time 85531
22:38:44:696   14f4   WATCHDOG: GPU 1 hangs in OpenCL call, exit
22:38:44:699   14f4   OC v7, Reset control for GPU 0, close miner right now if you want to use default control from Catalyst
22:38:44:700   14f4   OC v7, Reset control for GPU 1, close miner right now if you want to use default control from Catalyst
22:38:45:806   14f4   Restarting OK, exit...

johndoe2

newbie

Activity: 21

Merit: 0

Thanks for the update Claymore, I just updated my 7 Gpu hybrid rig to 10.0. My multimedia PC seems to be crashing so I'm using the previous version for now

Intristing

full member

Activity: 227

Merit: 100

Quote from: Call_Me_Bambi on September 01, 2017, 01:03:56 PM

Version 10.0 now available on Mega.

Can we change the voltage for AMD R9 390?

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 630. (Read 6590565 times)