Hi Claymore : is there a new version of your dual miner in the pipe, ready soon ?
The actual one is very good, but we ever hope better ;-).
Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 640. (Read 6590757 times)
August 27, 2017, 01:06:05 PM
August 27, 2017, 12:51:17 PM
Good Afternoon
I've been reading this forum for some time but this is my first post and I apologize for being a help request.
I Have 3 rigs running Claymore for some time now but one of them has a strange problem, the miner detects a problem with one GPU, sends message for restarting and after it restarts windows hangs with a new log file with only 8 lines on it.
SO: Windows 10
Cards: 2 RX580 and 6 RX560
Driver: 22.19.662.4
Miner Version: v9.8
Every card modded and patched
args: args: -epool eu1.ethermine.org:4444 -ewal XXXXXXX.MinerXX -epsw x -dcri 45,35,45,45,25,45 -mode 1 -dbg 1 -gser 1 -r 60 -dbg 1 -lidag 0,1,0 -allpools 1 -allcoins 1
Logfile with error:
New log when windows hangs:
There are no errors on windows logs or anything and every time this happens I have to restart the rig.
In args I specified a restart every 60 minutes and that miner restart works great but the miner restart after GPU failure does not.
Any Ideas?
The GPU that fails is one of the RX580.
Thanks in advance
I've been reading this forum for some time but this is my first post and I apologize for being a help request.
I Have 3 rigs running Claymore for some time now but one of them has a strange problem, the miner detects a problem with one GPU, sends message for restarting and after it restarts windows hangs with a new log file with only 8 lines on it.
SO: Windows 10
Cards: 2 RX580 and 6 RX560
Driver: 22.19.662.4
Miner Version: v9.8
Every card modded and patched
args: args: -epool eu1.ethermine.org:4444 -ewal XXXXXXX.MinerXX -epsw x -dcri 45,35,45,45,25,45 -mode 1 -dbg 1 -gser 1 -r 60 -dbg 1 -lidag 0,1,0 -allpools 1 -allcoins 1
Logfile with error:
Code:
17:00:59:018 15fc watchdog - thread 0 (gpu0), hb time 93
17:00:59:034 15fc watchdog - thread 1 (gpu0), hb time 266
17:00:59:034 15fc watchdog - thread 2 (gpu1), hb time 79562
17:00:59:034 15fc WATCHDOG: GPU 1 hangs in OpenCL call, exit
17:00:59:034 15fc watchdog - thread 3 (gpu1), hb time 79375
17:00:59:050 15fc WATCHDOG: GPU 1 hangs in OpenCL call, exit
17:00:59:050 15fc watchdog - thread 4 (gpu2), hb time 157
17:00:59:050 15fc watchdog - thread 5 (gpu2), hb time 313
17:00:59:050 15fc watchdog - thread 6 (gpu3), hb time 63
17:00:59:065 15fc watchdog - thread 7 (gpu3), hb time 234
17:00:59:065 15fc watchdog - thread 8 (gpu4), hb time 93
17:00:59:065 15fc watchdog - thread 9 (gpu4), hb time 281
17:00:59:065 15fc watchdog - thread 10 (gpu5), hb time 78
17:00:59:065 15fc watchdog - thread 11 (gpu5), hb time 234
17:00:59:081 15fc watchdog - thread 12 (gpu6), hb time 281
17:00:59:081 15fc watchdog - thread 13 (gpu6), hb time 125
17:00:59:081 15fc watchdog - thread 14 (gpu7), hb time 234
17:00:59:081 15fc watchdog - thread 15 (gpu7), hb time 78
17:01:00:362 15fc Restarting OK, exit...
New log when windows hangs:
Code:
17:01:03:316 1f38 args: -epool eu1.ethermine.org:4444 -ewal XXXXXXX.MinerXX -epsw x -dcri 45,35,45,45,25,45 -mode 1 -dbg 1 -gser 1 -r 60 -dbg 1 -lidag 0,1,0 -allpools 1 -allcoins 1
17:01:03:316 1f38
17:01:03:316 1f38 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
17:01:03:316 1f38 º Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.8 º
17:01:03:331 1f38 ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
17:01:03:331 1f38
17:01:03:550 1f38 ETH: 5 pools are specified
17:01:03:550 1f38 Main Ethereum pool is eu1.ethermine.org:4444
There are no errors on windows logs or anything and every time this happens I have to restart the rig.
In args I specified a restart every 60 minutes and that miner restart works great but the miner restart after GPU failure does not.
Any Ideas?
The GPU that fails is one of the RX580.
Thanks in advance
August 27, 2017, 12:23:04 PM
I have noticed a bug with combo ETH Miner v9.8 + AMD Blockchain Aug23 driver.
If miner looses connection to a pool, after reconnection hashrate significially drops.
Restarting the miner solves this problem.
Hasrate before reconnection to pool is ~156MH (26MH x 6 cards) and hashrate after reconnection is ~67MH (7, 11, 11, 7, 11, 18MH).
There was no such a problem with same miner and older drivers.
Claymore, I can send you the log, if it is neccessary.
If miner looses connection to a pool, after reconnection hashrate significially drops.
Restarting the miner solves this problem.
Hasrate before reconnection to pool is ~156MH (26MH x 6 cards) and hashrate after reconnection is ~67MH (7, 11, 11, 7, 11, 18MH).
There was no such a problem with same miner and older drivers.
Claymore, I can send you the log, if it is neccessary.
August 27, 2017, 11:43:40 AM
I have one GPU that has a high bad shares when i use lidag 1 2 or 3 but when i have it at 0 no bad share. problem is it hangs when it changes coins for dev fee. It affects profitability too much with lidag since bad share rate and extra time when dag is generated and dev time is extended for the period it is generating the dag. Is there any other solution for this?
August 27, 2017, 11:39:09 AM
1 year back, one of my very new rigs was taking 450 Watts on the wall.
Now I've just checked and it's consuming 600 Watts for the very same hash rate.
Does the efficiency go down this much of the hardware?
your rig is possibly becoming wiser with time and does something productive for itself on your expenseNow I've just checked and it's consuming 600 Watts for the very same hash rate.
Does the efficiency go down this much of the hardware?
Dust or PSU, you need to blow it out w/ air
It should not happen: the worst PSU I had, went from 88% efficiency down to 78% in a year and bit.
You are talking about a huge drop: something like a PSU at 90% efficiency going down to 60% efficiency.
August 27, 2017, 11:18:38 AM
1 year back, one of my very new rigs was taking 450 Watts on the wall.
Now I've just checked and it's consuming 600 Watts for the very same hash rate.
Does the efficiency go down this much of the hardware?
your rig is possibly becoming wiser with time and does something productive for itself on your expenseNow I've just checked and it's consuming 600 Watts for the very same hash rate.
Does the efficiency go down this much of the hardware?
Dust or PSU, you need to blow it out w/ air
August 27, 2017, 10:33:59 AM
Howdy Devs and happy Miners!!
Question: When the Claymore dual miner restarts (for whatever reason: coin switch etc.) it resets the core voltage value on my MSI R9 290x Gaming 4G to zero. This is a huge problem because it hits 80C on this setting. I have to manually go back into Afterburner and reset it to -100 everytime. This gets the card back down to 70C without affecting my hashrate, so how do I access and change this particular setting within Claymore? FWIW I also have an R9 390 in this rig but when Claymore resets the core voltage value this card is not negatively affected in the temperature department.
My Rig:
Running Nicehash Legacy
Crimson Blockchain drivers
MSI Afterburner 4.4.0 beta 12
Motherboard: 990fx-ud3
GTX 1070
Rx 580
R9 290x <---problem card
R9 390
Thanks in advance!!
Chris
Question: When the Claymore dual miner restarts (for whatever reason: coin switch etc.) it resets the core voltage value on my MSI R9 290x Gaming 4G to zero. This is a huge problem because it hits 80C on this setting. I have to manually go back into Afterburner and reset it to -100 everytime. This gets the card back down to 70C without affecting my hashrate, so how do I access and change this particular setting within Claymore? FWIW I also have an R9 390 in this rig but when Claymore resets the core voltage value this card is not negatively affected in the temperature department.
My Rig:
Running Nicehash Legacy
Crimson Blockchain drivers
MSI Afterburner 4.4.0 beta 12
Motherboard: 990fx-ud3
GTX 1070
Rx 580
R9 290x <---problem card
R9 390
Thanks in advance!!
Chris
August 27, 2017, 09:34:34 AM
Any word on an update to the miner to support the new AMD blockchain beta drivers? Can't undervolt with 9.8 miner settings if using new drivers. Come on Claymore. We need you buddy!
August 27, 2017, 09:19:37 AM
Hello everyone. I have error on claymore, ETH: Stratum - Failed to connect. Network is normally, i tried to reset router, changed dns but nothing work. Plz help, first time i saw that issue and dont know how to fix it
The site says that the address is us1.ethermine.org:14444 not us1-ethermine.org:14444
August 27, 2017, 06:57:19 AM
Hi guys i need a pro Tip )))
Im using two asus strix 1060 6 gb
mining ETC on nanopool with Claymore 9.8
sometimes its found share very low
is it im doing something wrong ?
btw 46 mhs
TY
Im using two asus strix 1060 6 gb
mining ETC on nanopool with Claymore 9.8
sometimes its found share very low
is it im doing something wrong ?
btw 46 mhs
TY
August 27, 2017, 06:38:53 AM
Hello everyone. I have error on claymore, ETH: Stratum - Failed to connect. Network is normally, i tried to reset router, changed dns but nothing work. Plz help, first time i saw that issue and dont know how to fix it
http://imgur.com/a/7XGqY
http://imgur.com/a/7XGqY
August 27, 2017, 06:28:37 AM
1 year back, one of my very new rigs was taking 450 Watts on the wall.
Now I've just checked and it's consuming 600 Watts for the very same hash rate.
Does the efficiency go down this much of the hardware?
your rig is possibly becoming wiser with time and does something productive for itself on your expenseNow I've just checked and it's consuming 600 Watts for the very same hash rate.
Does the efficiency go down this much of the hardware?
Could you clarify that a bit more?
https://youtu.be/ARJ8cAGm6JE
August 27, 2017, 06:27:07 AM
1 year back, one of my very new rigs was taking 450 Watts on the wall.
Now I've just checked and it's consuming 600 Watts for the very same hash rate.
Does the efficiency go down this much of the hardware?
Now I've just checked and it's consuming 600 Watts for the very same hash rate.
Does the efficiency go down this much of the hardware?
What about the temperature on the cards and ambient? Has that increased?
Power consumption is side effect of increased performance. Claymore has optimised the miner significantly since 1 year ago. Thus increased power consumption.
A big yes! Temperature has been extremely high too along with the increase of power. But hash-rate hasn't changed/increased.
Temperature now with 100% fan is around 90, never happened before.
August 27, 2017, 05:30:02 AM
Quick question on what I'm looking at.
When the miner starts to mine, what does the time on the far right of every update mean?
If it says Time: 00:10 does that mean 10 seconds pass or minutes pass?
When the miner starts to mine, what does the time on the far right of every update mean?
If it says Time: 00:10 does that mean 10 seconds pass or minutes pass?
hh:mm
August 27, 2017, 03:28:52 AM
Quick question on what I'm looking at.
When the miner starts to mine, what does the time on the far right of every update mean?
If it says Time: 00:10 does that mean 10 seconds pass or minutes pass?
When the miner starts to mine, what does the time on the far right of every update mean?
If it says Time: 00:10 does that mean 10 seconds pass or minutes pass?
August 27, 2017, 02:39:13 AM
I keep getting the error that ethermine.org's pool is invalid.
02:11:06:398 c4c args:
02:11:06:400 c4c
02:11:06:400 c4c ﾉﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍｻ
02:11:06:403 c4c ｺ Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.8 ｺ
02:11:06:404 c4c ﾈﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍｼ
02:11:06:405 c4c
02:11:06:608 c4c ETH: No pools specified! Specify at least one valid pool in "-epool" parameter.
I'm using this on the startminer.bat file
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal "address"."name" -epsw x
02:11:06:398 c4c args:
02:11:06:400 c4c
02:11:06:400 c4c ﾉﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍｻ
02:11:06:403 c4c ｺ Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.8 ｺ
02:11:06:404 c4c ﾈﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍｼ
02:11:06:405 c4c
02:11:06:608 c4c ETH: No pools specified! Specify at least one valid pool in "-epool" parameter.
I'm using this on the startminer.bat file
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal "address"."name" -epsw x
Try PORT 4444
August 27, 2017, 01:46:52 AM
I keep getting the error that ethermine.org's pool is invalid.
02:11:06:398 c4c args:
02:11:06:400 c4c
02:11:06:400 c4c ﾉﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍｻ
02:11:06:403 c4c ｺ Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.8 ｺ
02:11:06:404 c4c ﾈﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍｼ
02:11:06:405 c4c
02:11:06:608 c4c ETH: No pools specified! Specify at least one valid pool in "-epool" parameter.
I'm using this on the startminer.bat file
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal "address"."name" -epsw x
02:11:06:398 c4c args:
02:11:06:400 c4c
02:11:06:400 c4c ﾉﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍｻ
02:11:06:403 c4c ｺ Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.8 ｺ
02:11:06:404 c4c ﾈﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍｼ
02:11:06:405 c4c
02:11:06:608 c4c ETH: No pools specified! Specify at least one valid pool in "-epool" parameter.
I'm using this on the startminer.bat file
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal "address"."name" -epsw x
August 26, 2017, 08:52:25 PM
1 year back, one of my very new rigs was taking 450 Watts on the wall.
Now I've just checked and it's consuming 600 Watts for the very same hash rate.
Does the efficiency go down this much of the hardware?
Now I've just checked and it's consuming 600 Watts for the very same hash rate.
Does the efficiency go down this much of the hardware?
What about the temperature on the cards and ambient? Has that increased?
Power consumption is side effect of increased performance. Claymore has optimised the miner significantly since 1 year ago. Thus increased power consumption.
August 26, 2017, 08:27:30 PM
1 year back, one of my very new rigs was taking 450 Watts on the wall.
Now I've just checked and it's consuming 600 Watts for the very same hash rate.
Does the efficiency go down this much of the hardware?
your rig is possibly becoming wiser with time and does something productive for itself on your expenseNow I've just checked and it's consuming 600 Watts for the very same hash rate.
Does the efficiency go down this much of the hardware?
Could you clarify that a bit more?
Your Rig is Dating His rig
August 26, 2017, 06:34:03 PM
Sir, when will you update the Cryptonote miner for MONERO. seems like small scale miners are jumping to mine Monero now.. (im one of those 
)
)I'm one of those 'small scale miners' and have switched to Monero using 'Claymore CryptoNote GPU Miner v9.7 Beta - POOL'.
As far as I can tell it's working just fine, but I would not complain if it could be improved.
Jump to: