Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 734.

chronek

sr. member

Activity: 273

Merit: 250

BD People Are Legend

Quote from: greatania on July 19, 2017, 06:40:05 AM

Know anybody what is ? Could be difficulty, that sets from the pool? Thank you

Yes, a pool sets a lower difficulty (target) than the network difficulty in order for your miner to easier find shares, even if that share not solve block it validate that you working on sollution. Usual that difficulty is based on the hashrate you report to the pool.

mzeoatrakeb

newbie

Activity: 25

Merit: 0

Quote from: yany on July 19, 2017, 08:59:05 AM

Quote from: mzeoatrakeb on July 19, 2017, 08:43:02 AM

Hello guys, I have GIGABYTE Radeon RX 580 GAMING 8GB

Its def give 21 mhs after flash 26mhs.

can someone help ? i would like got 28-30 mhs.

what I Did:

in flash/Bios 24 Mhs
Memory

MHz Mv
300 1000
1000 1000
2000 1000

Mhz | Timing Strap

1750 copy
2000 replace.

in flash/Bios 26 mhs
Memory

MHz Mv
300 900
1000 900
2000 900

Mhz | Timing Strap

1750 copy
2000 replace.

any ideas to get 28-30 mhs?

Increase RAM clock to 2200 (or close to that, what is stable for you)
Decrease GPU: 1200 MHz
Decrease TDP: -10%

With bios mod, it should give you 28-29-30 depending on the driver/miner version. (I suggest latest available from both + Creative Update for Windows)

you got same card?

miner 9.7
driver: 17.1.1

yany

newbie

Activity: 31

Merit: 0

Quote from: mzeoatrakeb on July 19, 2017, 08:43:02 AM

Hello guys, I have GIGABYTE Radeon RX 580 GAMING 8GB

Its def give 21 mhs after flash 26mhs.

can someone help ? i would like got 28-30 mhs.

what I Did:

in flash/Bios 24 Mhs
Memory

MHz Mv
300 1000
1000 1000
2000 1000

Mhz | Timing Strap

1750 copy
2000 replace.

in flash/Bios 26 mhs
Memory

MHz Mv
300 900
1000 900
2000 900

Mhz | Timing Strap

1750 copy
2000 replace.

any ideas to get 28-30 mhs?

Increase RAM clock to 2200 (or close to that, what is stable for you)
Decrease GPU: 1200 MHz
Decrease TDP: -10%

With bios mod, it should give you 28-29-30 depending on the driver/miner version. (I suggest latest available from both + Creative Update for Windows)

mzeoatrakeb

newbie

Activity: 25

Merit: 0

Hello guys, I have GIGABYTE Radeon RX 580 GAMING 8GB

Its def give 21 mhs after flash 26mhs.

can someone help ? i would like got 28-30 mhs.

what I Did:

in flash/Bios 24 Mhs
Memory

MHz Mv
300 1000
1000 1000
2000 1000

Mhz | Timing Strap

1750 copy
2000 replace.

in flash/Bios 26 mhs
Memory

MHz Mv
300 900
1000 900
2000 900

Mhz | Timing Strap

1750 copy
2000 replace.

any ideas to get 28-30 mhs?

brownfly

full member

Activity: 308

Merit: 100

140 Watt per unit

ZenFr

legendary

Activity: 1260

Merit: 1046

Quote from: brownfly on July 19, 2017, 07:55:47 AM

9.7 gave my 1070 card good boost: from 29 MH/s to 30 MH/s, or from 146 to 151 MH/s at the same OC settings.

Yes, but what is your power consumption ? 100/115 W or 150 W (standard) ?
I am also with the 9.7 version of Claymore.

brownfly

full member

Activity: 308

Merit: 100

9.7 gave my 1070 card good boost: from 29 MH/s to 30 MH/s, or from 146 to 151 MH/s at the same OC settings.

Commie

full member

Activity: 621

Merit: 108

Quote from: ZenFr on July 19, 2017, 07:38:13 AM

Quote from: Commie on July 19, 2017, 06:18:56 AM

Double check your settings. 1070 should be close to 30 even without severe overclocking. On my 970's I get 22-23 Mh/s and cards are cold (<60C).

I forgot to tell the power consumption of all my 1070s are limited to they minimum (100 W for 2 and 115 W for 2 others).
But even with these low consumptions (for GTX 1070), my ratio hashrate/consumption is under this example with 1060.
I can't use AfterBurner because I'm with Linux (but I can overclock a little bit inside the driver)

Not familiar with Linux so can't say anything on that, but it looks like your cards are doing stock hashrate with big power savings. If you're happy with that just leave it as it is, your cards will work for years

ZenFr

legendary

Activity: 1260

Merit: 1046

Quote from: Commie on July 19, 2017, 06:18:56 AM

Quote from: ZenFr on July 19, 2017, 05:37:52 AM

Your 25.4 mh/s is very high for a simple GTX 1060 6 GB.
It is approx what I have with my GTX 1070...

Double check your settings. 1070 should be close to 30 even without severe overclocking. On my 970's I get 22-23 Mh/s and cards are cold (<60C).

I forgot to tell the power consumption of all my 1070s are limited to they minimum (100 W for 2 and 115 W for 2 others).
But even with these low consumptions (for GTX 1070), my ratio hashrate/consumption is under this example with 1060.
I can't use AfterBurner because I'm with Linux (but I can overclock a little bit inside the driver)

ZenFr

legendary

Activity: 1260

Merit: 1046

Quote from: fluxdane on July 19, 2017, 05:43:35 AM

Quote from: ZenFr on July 19, 2017, 05:37:52 AM

Quote from: fluxdane on July 19, 2017, 05:31:32 AM

Quote from: ozzy1926 on July 18, 2017, 04:54:58 PM

Any evga 1060 ftw or sc user can share their setting ? I can't pass 24.5 Mh/s

I have an 8 card rig of EVGA 06G-P4-6161-KR GeForce GTX 1060 6GB (single fan), since Claymore 9.7 I´m getting a max hash of 25,4mh/s per card (solo eth mining).

My settings:
Power Limit: 65%
Temp Limit: 63 Cº
Core Clock: 145 Mhz
Memory Clock: 1000 Mhz
Fan: 90%

This whole rig pulls 700w. Cards temp is between 55ºC - 62ºC. Running stable 11 days now with abnove settings.

Hope it helps

Your 25?4 mh/s is very high for a simple GTX 1060 6 GB.
It is approx what I have with my GTX 1070...

What do you chooe 90% for the fan : it is very high. Because there is only one fan in your 1060 ? With 2 fans, you would choose the same setting, 90 % ?

Yes 90% fan speed is due to the single fan. I have another AMD rig with dual fans on the cards, and these run at 55% speed, the more fans the less fan speed required, and the less noise you will have.
1070s should reach 29mh/s if I remember correctly.

Thanks for the reply about single/double fan : it's interesting to know.

greatania

newbie

Activity: 25

Merit: 0

Know anybody what is ? Could be difficulty, that sets from the pool? Thank you

P00P135

full member

Activity: 1123

Merit: 136

Quote from: ryderbg on July 19, 2017, 06:30:35 AM

Hi guys! I just made new rig with 5 cards MSI RX580 8gb and there is problem with the cards which are connected to PCIEx16 via extender/riser Ver007. But the cards connected to PCIEx4 are ok. The problem is that the cards connected to PCIEx16 are mining with 4mh/s. Any ideas what to do?

Plug a monitor into them and make sure MSI afterburner recognizes them and is OCing them properly.

ryderbg

newbie

Activity: 7

Merit: 0

Hi guys! I just made new rig with 5 cards MSI RX580 8gb and there is problem with the cards which are connected to PCIEx16 via extender/riser Ver007. But the cards connected to PCIEx4 are ok. The problem is that the cards connected to PCIEx16 are mining with 4mh/s. Any ideas what to do?

naeme18720

sr. member

Activity: 290

Merit: 250

Quote from: siampumpkin on July 19, 2017, 03:55:35 AM

Quote from: naeme18720 on July 19, 2017, 03:49:39 AM

Quote from: siampumpkin on July 19, 2017, 03:42:26 AM

Quote from: naeme18720 on July 19, 2017, 03:40:40 AM

Quote from: siampumpkin on July 19, 2017, 03:24:43 AM

Quote from: naeme18720 on July 19, 2017, 03:04:30 AM

Hi
Are i can mining eth in windows xp 64bit???

If you have a GPU such as AMD 4XX/5xx or GTX-10XX you can mine with Claymore. You cannot CPU mine ETh

Thanks
I have gpu rx....
but drivers for gpu rx470 4gb in windows xp 64bit where??

All the drivers you need are the ones from AMD website. Follow the instructions on the first page of this thread for instructions on downloading, installing and running the miner.

Ok this site http://support.amd.com
Thanks very much for help to me
For bios rx470 4gb sapphire
This link??? I used
http://1stminingrig.com/sapphire-rx-470-nitro-oc-4gb-bios-flash-mod-tutorial-hynix-elpida-samsung-micron/

If you are going to flash your card make sure the bios is for the same type of memory you have in your card. You can check this with GPUZ. Also you will need to patch the drivers for them to work in Windows with a modified bios because it will not have the correct bios signature. You can find information on that Here https://www.techpowerup.com/228536/amd-bios-signature-check-re-enabled-with-relive-locks-out-polaris-bios-modders

Ok
Very thanks but i not see nothing for my gpu bios or other things
Sapphire rx470 4gb nitro oc

Commie

full member

Activity: 621

Merit: 108

Quote from: ZenFr on July 19, 2017, 05:37:52 AM

Your 25.4 mh/s is very high for a simple GTX 1060 6 GB.
It is approx what I have with my GTX 1070...

Double check your settings. 1070 should be close to 30 even without severe overclocking. On my 970's I get 22-23 Mh/s and cards are cold (<60C).

fluxdane

newbie

Activity: 3

Merit: 0

Quote from: ZenFr on July 19, 2017, 05:37:52 AM

Quote from: fluxdane on July 19, 2017, 05:31:32 AM

Quote from: ozzy1926 on July 18, 2017, 04:54:58 PM

Any evga 1060 ftw or sc user can share their setting ? I can't pass 24.5 Mh/s

I have an 8 card rig of EVGA 06G-P4-6161-KR GeForce GTX 1060 6GB (single fan), since Claymore 9.7 I´m getting a max hash of 25,4mh/s per card (solo eth mining).

My settings:
Power Limit: 65%
Temp Limit: 63 Cº
Core Clock: 145 Mhz
Memory Clock: 1000 Mhz
Fan: 90%

This whole rig pulls 700w. Cards temp is between 55ºC - 62ºC. Running stable 11 days now with abnove settings.

Hope it helps

Your 25?4 mh/s is very high for a simple GTX 1060 6 GB.
It is approx what I have with my GTX 1070...

What do you chooe 90% for the fan : it is very high. Because there is only one fan in your 1060 ? With 2 fans, you would choose the same setting, 90 % ?

Yes 90% fan speed is due to the single fan. I have another AMD rig with dual fans on the cards, and these run at 55% speed, the more fans the less fan speed required, and the less noise you will have.
1070s should reach 29mh/s if I remember correctly.

greatania

newbie

Activity: 25

Merit: 0

Hi folks, am mining solo ETC and for five days now i have the same target in Claymore 9.5,

july 14: Current ETH share target: 0x000000016e80fe03 (diff: 3000MH), epoch #136

july 19: Current ETH share target: 0x000000016e80fe03 (diff: 3000MH), epoch #137

I mean here is same numbers for the share target <0x000000016e80fe03> with different epoch #

This is normal ?
Thank You

ZenFr

legendary

Activity: 1260

Merit: 1046

Quote from: fluxdane on July 19, 2017, 05:31:32 AM

Quote from: ozzy1926 on July 18, 2017, 04:54:58 PM

Any evga 1060 ftw or sc user can share their setting ? I can't pass 24.5 Mh/s

I have an 8 card rig of EVGA 06G-P4-6161-KR GeForce GTX 1060 6GB (single fan), since Claymore 9.7 I´m getting a max hash of 25,4mh/s per card (solo eth mining).

My settings:
Power Limit: 65%
Temp Limit: 63 Cº
Core Clock: 145 Mhz
Memory Clock: 1000 Mhz
Fan: 90%

This whole rig pulls 700w. Cards temp is between 55ºC - 62ºC. Running stable 11 days now with abnove settings.

Hope it helps

Your 25.4 mh/s is very high for a simple GTX 1060 6 GB.
It is approx what I have with my GTX 1070...

What do you chooe 90% for the fan : it is very high. Because there is only one fan in your 1060 ? With 2 fans, you would choose the same setting, 90 % ?

fluxdane

newbie

Activity: 3

Merit: 0

Quote from: ozzy1926 on July 18, 2017, 04:54:58 PM

Any evga 1060 ftw or sc user can share their setting ? I can't pass 24.5 Mh/s

I have an 8 card rig of EVGA 06G-P4-6161-KR GeForce GTX 1060 6GB (single fan), since Claymore 9.7 I´m getting a max hash of 25,4mh/s per card (solo eth mining).

My settings:
Power Limit: 65%
Temp Limit: 63 Cº
Core Clock: 145 Mhz
Memory Clock: 1000 Mhz
Fan: 90%

This whole rig pulls 700w. Cards temp is between 55ºC - 62ºC. Running stable 11 days now with abnove settings.

Hope it helps

npittas

newbie

Activity: 29

Merit: 0

Quote from: nnsltlh on July 19, 2017, 05:04:55 AM

Help me, My card R9 270 2GB not work with tool Claymore. show me how to fix this, pls. tks sp.

http://i228.photobucket.com/albums/ee102/nnsltlh/error%20claymore.jpg

2Gb Cards no longer work with ETH. Either try a coin with DAG<2Gb or use another GPU

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 734. (Read 6590565 times)