Any evga 1060 ftw or sc user can share their setting ? I can't pass 24.5 Mh/s
I have an 8 card rig of EVGA 06G-P4-6161-KR GeForce GTX 1060 6GB (single fan), since Claymore 9.7 I´m getting a max hash of 25,4mh/s per card (solo eth mining).
My settings:
Power Limit: 65%
Temp Limit: 63 Cº
Core Clock: 145 Mhz
Memory Clock: 1000 Mhz
Fan: 90%
This whole rig pulls 700w. Cards temp is between 55ºC - 62ºC. Running stable 11 days now with abnove settings.
Hope it helps
Thanks for the setting but did you checked the watt meter from wall because I get 720-730 with 7 cards
Wallmeter checked 704w, I’m solo mining eth. More info, CPU is Celeron, I have 4GB RAM and 2x750w Corsair PSUs.
Hi,
I started to use this dual miner. I want to mine ETH+SC.
When I start the .bat file, mining begins and a few seconds later, the display turns off and newer turns back on.
The computer freezes. I had to restart the computer.
Operating system: Windows 10
Graphic card: Sapphire RX570 Pulse 4GB
Driver version: 17.4.4 (I have also tried the other versions)
I didn't understand what happens.
Can anyone help me?
Thank you all.
Imagine asking a doctor: "I am dying, please help"...
If you want help you have to provide as much information as possible!
What is your Hardware, Software, Configuration, and etc? Post screenshots from GPU-Z, MSI AB, PBE, Claymore logs ant etc....
If this happens only when dual mining you are probably expecting too much from your cards. If you see this happening sometimes when solo mining as well, then you have probably overclocked too much, or incompatible GPU BIOS settings. Here a few things you can try:
Check overclocking settings, you may want to overclock less, resulting in less mh/s but more stable mining.
When dual mining try to decrease -dcri for the second coin until your rig runs stable.
Try also dual mining eth+another coin except SIA.
Try dual mining SIA+another coin except eth.
If nothing helps, you may have a faulty GPU or riser.
Cheers
