Nice 4% boost for Baffins, May be another nvidia 1060 boost in next version? Still a bit behind
Good work!
Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 756. (Read 6590757 times)
July 09, 2017, 01:07:42 PM
Hey Claymore,
Nice 4% boost for Baffins, May be another nvidia 1060 boost in next version? Still a bit behind
Good work!
Nice 4% boost for Baffins, May be another nvidia 1060 boost in next version? Still a bit behind
Good work!
July 09, 2017, 01:05:10 PM
I am so desperate that I will donate eth if i solve this....
6x 1070, asrock h81 btc, win 10, latest nvidia drivers, claymore 9.6, 1200w PSU, Virtual set to 16 gb.
Even at stock settings , the miner crashes, sometimes directly , and sometimes after 1-2 hours.
I have tried different nvidia drivers, and even tried previous claymore versions.
Tried swapping the cards around and setting in bios gen1/gen2 ( it should work out of the box )
I have connected the 2 molex connectors on the mobo and also having 6 powered usb risers.
Only time i can get it to go a bit longer is if i have it at stock, but change the Power target to around 60% for all cards.
I have a "wattman" and it says computer is taking 650w from the wall. but thats with low Power target, otherwise it is around 900.
When it crashes, 1 card Always dissapears , both from the miner and from Afterburner ( in AB its there but cant change anything because its grayed out ) resulting in having to reset PC.
Sometimes when it crashes , my monitor that is connected to 1 of the cards also shuts down.
Most of the times i get BSOD after the crash and if that doesnt happen, the whole computer freezes up.
I really want to Think there is enough Power to drive this with 1200w.
Edit : Just Before it crashes, my mouse curser is almost unmovable. Really laggy. But both cpu and memory are far from maxed out.
My cards temp are also not capping, just around 60.
Any ideas ?
6x 1070, asrock h81 btc, win 10, latest nvidia drivers, claymore 9.6, 1200w PSU, Virtual set to 16 gb.
Even at stock settings , the miner crashes, sometimes directly , and sometimes after 1-2 hours.
I have tried different nvidia drivers, and even tried previous claymore versions.
Tried swapping the cards around and setting in bios gen1/gen2 ( it should work out of the box )
I have connected the 2 molex connectors on the mobo and also having 6 powered usb risers.
Only time i can get it to go a bit longer is if i have it at stock, but change the Power target to around 60% for all cards.
I have a "wattman" and it says computer is taking 650w from the wall. but thats with low Power target, otherwise it is around 900.
When it crashes, 1 card Always dissapears , both from the miner and from Afterburner ( in AB its there but cant change anything because its grayed out ) resulting in having to reset PC.
Sometimes when it crashes , my monitor that is connected to 1 of the cards also shuts down.
Most of the times i get BSOD after the crash and if that doesnt happen, the whole computer freezes up.
I really want to Think there is enough Power to drive this with 1200w.
Edit : Just Before it crashes, my mouse curser is almost unmovable. Really laggy. But both cpu and memory are far from maxed out.
My cards temp are also not capping, just around 60.
Any ideas ?
+1 you need to unplug all of them and add one and let it run for a bit and add one at a time. Time consuming yes, but will get you to the root of thep roblem. I had a faulty vga connecter that was my issue
Sounds like you're either overclocking too much, or one of your risers has an intermittent connection. Shady risers do all kinds of weird stuff.
July 09, 2017, 01:04:45 PM
I can't for the life of me get Siacoin to dual mine. Anything obvious I'm doing wrong? Ethereum runs fine, but SC never gets authorized, and my SC hash rate just sits at 0.000 MH/s and I just keep getting SC job timeouts.
My startup script:
My output (edited slightly for compactness):
Notice in there that it says ETH: Authorized, but it never says anything about SC: Authorized? I think this is my problem, but I don't know what else to do about it.
What I've tried so far, none of which have been successful:
Any thoughts?
My startup script:
Code:
ethdcrminer64.exe -epool eth-us-east1.nanopool.org:9999 -ewal ***my ethereum info*** -epsw x -dpool stratum+tcp://sia-us-west1.nanopool.org:7777 -dwal ***my siacoin address***/***miner name***/***email address*** -ftime 10 -dcoin sia
My output (edited slightly for compactness):
Code:
����������������������������������������������������������������ͻ
� Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.7 �
����������������������������������������������������������������ͼ
ETH: 5 pools are specified
Main Ethereum pool is eth-us-east1.nanopool.org:9999
SC: 5 pools are specified
Main Siacoin pool is sia-us-west1.nanopool.org:7777
AMD OpenCL platform not found
CUDA initializing...
NVIDIA Cards available: 5
CUDA Driver Version/Runtime Version: 9.0/8.0
GPU #0: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1
GPU #1: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1
GPU #2: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1
GPU #3: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1
GPU #4: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1
Total cards: 5
ETH: Stratum - connecting to 'eth-us-east1.nanopool.org' <158.69.85.38> port 9999
DUAL MINING MODE ENABLED: ETHEREUM+SIACOIN
ETH: eth-proxy stratum mode
ETH: Stratum - Connected (eth-us-east1.nanopool.org:9999)
Watchdog enabled
SC: Stratum - connecting to 'sia-us-west1.nanopool.org' <45.32.71.82> port 7777
Remote management (READ-ONLY MODE) is enabled on port 3333
SC: Stratum - Connected (sia-us-west1.nanopool.org:7777)
ETH: Authorized
Setting DAG epoch #133...
Setting DAG epoch #133 for GPU0
[snip]
Create GPU buffer for GPU0
[snip]
GPU0 DAG creation time - 5327 ms
Setting DAG epoch #133 for GPU0 done
[snip]
ETH: 07/09/17-20:52:04 - SHARE FOUND - (GPU 0)
ETH: Share accepted (140 ms)!
Socket was closed remotely (by pool)
SC: Job timeout, disconnect, retry in 20 sec...
ETH - Total Speed: 155.754 Mh/s, Total Shares: 1(1+0+0+0+0), Rejected: 0, Time: 00:00
ETH: GPU0 32.165 Mh/s, GPU1 27.200 Mh/s, GPU2 31.693 Mh/s, GPU3 32.887 Mh/s, GPU4 31.810 Mh/s
SC - Total Speed: 0.000 Mh/s, Total Shares: 0(0+0+0+0+0), Rejected: 0
SC: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
Notice in there that it says ETH: Authorized, but it never says anything about SC: Authorized? I think this is my problem, but I don't know what else to do about it.
What I've tried so far, none of which have been successful:
- Generating a new Siacoin wallet address
- Changing my email address to a Gmail address
- -dcri intensities from about 1 to 500
- switching from Nanopool to Miningpoolhub
- switching to different Nanopool servers
- Claymore 9.5 and 9.7
Any thoughts?
July 09, 2017, 12:58:02 PM
I am so desperate that I will donate eth if i solve this....
6x 1070, asrock h81 btc, win 10, latest nvidia drivers, claymore 9.6, 1200w PSU, Virtual set to 16 gb.
Even at stock settings , the miner crashes, sometimes directly , and sometimes after 1-2 hours.
I have tried different nvidia drivers, and even tried previous claymore versions.
Tried swapping the cards around and setting in bios gen1/gen2 ( it should work out of the box )
I have connected the 2 molex connectors on the mobo and also having 6 powered usb risers.
Only time i can get it to go a bit longer is if i have it at stock, but change the Power target to around 60% for all cards.
I have a "wattman" and it says computer is taking 650w from the wall. but thats with low Power target, otherwise it is around 900.
When it crashes, 1 card Always dissapears , both from the miner and from Afterburner ( in AB its there but cant change anything because its grayed out ) resulting in having to reset PC.
Sometimes when it crashes , my monitor that is connected to 1 of the cards also shuts down.
Most of the times i get BSOD after the crash and if that doesnt happen, the whole computer freezes up.
I really want to Think there is enough Power to drive this with 1200w.
Edit : Just Before it crashes, my mouse curser is almost unmovable. Really laggy. But both cpu and memory are far from maxed out.
My cards temp are also not capping, just around 60.
Any ideas ?
6x 1070, asrock h81 btc, win 10, latest nvidia drivers, claymore 9.6, 1200w PSU, Virtual set to 16 gb.
Even at stock settings , the miner crashes, sometimes directly , and sometimes after 1-2 hours.
I have tried different nvidia drivers, and even tried previous claymore versions.
Tried swapping the cards around and setting in bios gen1/gen2 ( it should work out of the box )
I have connected the 2 molex connectors on the mobo and also having 6 powered usb risers.
Only time i can get it to go a bit longer is if i have it at stock, but change the Power target to around 60% for all cards.
I have a "wattman" and it says computer is taking 650w from the wall. but thats with low Power target, otherwise it is around 900.
When it crashes, 1 card Always dissapears , both from the miner and from Afterburner ( in AB its there but cant change anything because its grayed out ) resulting in having to reset PC.
Sometimes when it crashes , my monitor that is connected to 1 of the cards also shuts down.
Most of the times i get BSOD after the crash and if that doesnt happen, the whole computer freezes up.
I really want to Think there is enough Power to drive this with 1200w.
Edit : Just Before it crashes, my mouse curser is almost unmovable. Really laggy. But both cpu and memory are far from maxed out.
My cards temp are also not capping, just around 60.
Any ideas ?
Hi.
Last night has the same problem. I have the same hardware and software specs like you. After check all things, I saw a molex melted. I change the cable and works again.
Good luck.
(Sorry about my eng)
July 09, 2017, 12:53:08 PM
www.ubuntu.com, 1200W is definitely too little.
850W for mainboard and 3x cards.
850W for remaining 3x cards.
Do you recommend getting a better psu or does changing to Ubuntu do any difference regarding the Power? Cant imagine that.
But my wattman says 950 when they are all on 100% Power target, that is for the whole rig...
it's like redlining your Porsche, you can go there but don't keep it there. At 950W your 1200W PSU is probably about to kick the bucket.
July 09, 2017, 12:50:32 PM
www.ubuntu.com, 1200W is definitely too little.
850W for mainboard and 3x cards.
850W for remaining 3x cards.
Do you recommend getting a better psu or does changing to Ubuntu do any difference regarding the Power? Cant imagine that.
But my wattman says 950 when they are all on 100% Power target, that is for the whole rig...
July 09, 2017, 12:49:19 PM
I am so desperate that I will donate eth if i solve this....
6x 1070, asrock h81 btc, win 10, latest nvidia drivers, claymore 9.6, 1200w PSU, Virtual set to 16 gb.
Even at stock settings , the miner crashes, sometimes directly , and sometimes after 1-2 hours.
I have tried different nvidia drivers, and even tried previous claymore versions.
Tried swapping the cards around and setting in bios gen1/gen2 ( it should work out of the box )
I have connected the 2 molex connectors on the mobo and also having 6 powered usb risers.
Only time i can get it to go a bit longer is if i have it at stock, but change the Power target to around 60% for all cards.
I have a "wattman" and it says computer is taking 650w from the wall. but thats with low Power target, otherwise it is around 900.
When it crashes, 1 card Always dissapears , both from the miner and from Afterburner ( in AB its there but cant change anything because its grayed out ) resulting in having to reset PC.
Sometimes when it crashes , my monitor that is connected to 1 of the cards also shuts down.
Most of the times i get BSOD after the crash and if that doesnt happen, the whole computer freezes up.
I really want to Think there is enough Power to drive this with 1200w.
Edit : Just Before it crashes, my mouse curser is almost unmovable. Really laggy. But both cpu and memory are far from maxed out.
My cards temp are also not capping, just around 60.
Any ideas ?
6x 1070, asrock h81 btc, win 10, latest nvidia drivers, claymore 9.6, 1200w PSU, Virtual set to 16 gb.
Even at stock settings , the miner crashes, sometimes directly , and sometimes after 1-2 hours.
I have tried different nvidia drivers, and even tried previous claymore versions.
Tried swapping the cards around and setting in bios gen1/gen2 ( it should work out of the box )
I have connected the 2 molex connectors on the mobo and also having 6 powered usb risers.
Only time i can get it to go a bit longer is if i have it at stock, but change the Power target to around 60% for all cards.
I have a "wattman" and it says computer is taking 650w from the wall. but thats with low Power target, otherwise it is around 900.
When it crashes, 1 card Always dissapears , both from the miner and from Afterburner ( in AB its there but cant change anything because its grayed out ) resulting in having to reset PC.
Sometimes when it crashes , my monitor that is connected to 1 of the cards also shuts down.
Most of the times i get BSOD after the crash and if that doesnt happen, the whole computer freezes up.
I really want to Think there is enough Power to drive this with 1200w.
Edit : Just Before it crashes, my mouse curser is almost unmovable. Really laggy. But both cpu and memory are far from maxed out.
My cards temp are also not capping, just around 60.
Any ideas ?
Sounds like you're either overclocking too much, or one of your risers has an intermittent connection. Shady risers do all kinds of weird stuff.
July 09, 2017, 12:47:20 PM
Was running 9.5 at 22.8Mh per card, now getting 24mh per card. Thanks claymore, definitely dont mind paying the devfee considering its paying for improvments to hashing speeds 
July 09, 2017, 12:36:31 PM
July 09, 2017, 12:33:38 PM
I am so desperate that I will donate eth if i solve this....
6x 1070, asrock h81 btc, win 10, latest nvidia drivers, claymore 9.6, 1200w PSU, Virtual set to 16 gb.
Even at stock settings , the miner crashes, sometimes directly , and sometimes after 1-2 hours.
I have tried different nvidia drivers, and even tried previous claymore versions.
Tried swapping the cards around and setting in bios gen1/gen2 ( it should work out of the box )
I have connected the 2 molex connectors on the mobo and also having 6 powered usb risers.
Only time i can get it to go a bit longer is if i have it at stock, but change the Power target to around 60% for all cards.
I have a "wattman" and it says computer is taking 650w from the wall. but thats with low Power target, otherwise it is around 900.
When it crashes, 1 card Always dissapears , both from the miner and from Afterburner ( in AB its there but cant change anything because its grayed out ) resulting in having to reset PC.
Sometimes when it crashes , my monitor that is connected to 1 of the cards also shuts down.
Most of the times i get BSOD after the crash and if that doesnt happen, the whole computer freezes up.
I really want to Think there is enough Power to drive this with 1200w.
Edit : Just Before it crashes, my mouse curser is almost unmovable. Really laggy. But both cpu and memory are far from maxed out.
My cards temp are also not capping, just around 60.
Any ideas ?
My launcher :
timeout /t 60
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
ethdcrminer64.exe -epool eu1.ethermine.org:4444 -ewal Adress.Miner01 -epsw x -mode 1 -tt 68 -allpools 1
pause
Log :
234 1678 NVML: cannot get current temperature, error 15
18:33:16:250 1678 NVML: cannot get fan speed, error 15
18:33:16:862 1780 GPU 1, GpuMiner cu_k1 failed 6, the launch timed out and was terminated
18:33:17:447 33c GPU 5, GpuMiner cu_k1 failed 6, the launch timed out and was terminated
18:33:17:455 167c GPU 0, GpuMiner cu_k1 failed 6, the launch timed out and was terminated
18:33:17:463 f7c GPU 2, GpuMiner cu_k1 failed 6, the launch timed out and was terminated
18:33:17:472 e60 GPU 3, GpuMiner cu_k1 failed 6, the launch timed out and was terminated
18:33:17:481 10bc GPU 4, GpuMiner cu_k1 failed 6, the launch timed out and was terminated
18:33:17:496 1780 GPU 1, GpuMiner kx failed 1
18:33:17:506 33c GPU 5, GpuMiner kx failed 1
18:33:17:516 167c GPU 0, GpuMiner kx failed 1
18:33:17:527 f7c GPU 2, GpuMiner kx failed 1
18:33:17:534 e60 GPU 3, GpuMiner kx failed 1
18:33:17:543 10bc GPU 4, GpuMiner kx failed 1
18:33:17:505 1780 Set global fail flag, failed GPU1
18:33:17:559 1780 GPU 1 failed
18:33:17:523 167c Set global fail flag, failed GPU0
18:33:17:582 167c GPU 0 failed
18:33:17:542 e60 Set global fail flag, failed GPU3
18:33:17:599 e60 GPU 3 failed
18:33:17:516 33c Set global fail flag, failed GPU5
18:33:17:627 33c GPU 5 failed
18:33:17:533 f7c Set global fail flag, failed GPU2
18:33:17:641 f7c GPU 2 failed
18:33:17:550 10bc Set global fail flag, failed GPU4
18:33:17:657 10bc GPU 4 failed
18:33:17:665 177c GPU 1, GpuMiner cu_k1 failed 6, the launch timed out and was terminated
18:33:17:673 bc0 GPU 5, GpuMiner cu_k1 failed 6, the launch timed out and was terminated
18:33:17:687 258 GPU 0, GpuMiner cu_k1 failed 6, the launch timed out and was terminated
18:33:17:701 768 GPU 2, GpuMiner cu_k1 failed 6, the launch timed out and was terminated
18:33:17:711 1170 GPU 3, GpuMiner cu_k1 failed 6, the launch timed out and was terminated
18:33:17:718 e74 GPU 4, GpuMiner cu_k1 failed 6, the launch timed out and was terminated
18:33:17:730 177c GPU 1, GpuMiner kx failed 1
18:33:17:738 bc0 GPU 5, GpuMiner kx failed 1
18:33:17:746 258 GPU 0, GpuMiner kx failed 1
18:33:17:754 768 GPU 2, GpuMiner kx failed 1
18:33:17:773 1170 GPU 3, GpuMiner kx failed 1
18:33:17:780 e74 GPU 4, GpuMiner kx failed 1
18:33:17:737 177c Set global fail flag, failed GPU1
18:33:17:795 177c GPU 1 failed
18:33:17:752 258 Set global fail flag, failed GPU0
18:33:17:821 258 GPU 0 failed
18:33:17:779 1170 Set global fail flag, failed GPU3
18:33:17:841 1170 GPU 3 failed
18:33:17:745 bc0 Set global fail flag, failed GPU5
18:33:17:856 bc0 GPU 5 failed
18:33:17:788 e74 Set global fail flag, failed GPU4
18:33:17:872 e74 GPU 4 failed
18:33:17:771 768 Set global fail flag, failed GPU2
18:33:17:887 768 GPU 2 failed
18:33:19:613 1678 NVML: cannot get current temperature, error 999 (an internal driver error occurred)
18:33:19:629 1678 NVML: cannot get fan speed, error 999 (an internal driver error occurred)
18:33:19:738 1678 NVML: cannot get current temperature, error 999 (an internal driver error occurred)
18:33:19:754 1678 NVML: cannot get fan speed, error 999 (an internal driver error occurred)
18:33:19:848 1678 NVML: cannot get current temperature, error 999 (an internal driver error occurred)
18:33:19:848 1678 NVML: cannot get fan speed, error 999 (an internal driver error occurred)
18:33:19:957 1678 NVML: cannot get current temperature, error 999 (an internal driver error occurred)
18:33:19:957 1678 NVML: cannot get fan speed, error 999 (an internal driver error occurred)
18:33:20:051 1678 NVML: cannot get current temperature, error 999 (an internal driver error occurred)
18:33:20:051 1678 NVML: cannot get fan speed, error 999 (an internal driver error occurred)
18:33:20:145 1678 NVML: cannot get current temperature, error 999 (an internal driver error occurred)
18:33:20:145 1678 NVML: cannot get fan speed, error 999 (an internal driver error occurred)
18:33:20:238 1678 NVML: cannot get current temperature, error 999 (an internal driver error occurred)
18:33:20:238 1678 NVML: cannot get fan speed, error 999 (an internal driver error occurred)
18:33:20:332 1678 NVML: cannot get current temperature, error 999 (an internal driver error occurred)
18:33:20:332 1678 NVML: cannot get fan speed, error 999 (an internal driver error occurred)
18:33:20:426 1678 NVML: cannot get current temperature, error 999 (an internal driver error occurred)
18:33:20:426 1678 NVML: cannot get fan speed, error 999 (an internal driver error occurred)
18:33:20:520 1678 NVML: cannot get current temperature, error 999 (an internal driver error occurred)
18:33:20:520 1678 NVML: cannot get fan speed, error 999 (an internal driver error occurred)
18:33:20:613 1678 NVML: cannot get current temperature, error 999 (an internal driver error occurred)
18:33:20:613 1678 NVML: cannot get fan speed, error 999 (an internal driver error occurred)
18:33:20:707 1678 NVML: cannot get current temperature, error 999 (an internal driver error occurred)
18:33:20:707 1678 NVML: cannot get fan speed, error 999 (an internal driver error occurred)
6x 1070, asrock h81 btc, win 10, latest nvidia drivers, claymore 9.6, 1200w PSU, Virtual set to 16 gb.
Even at stock settings , the miner crashes, sometimes directly , and sometimes after 1-2 hours.
I have tried different nvidia drivers, and even tried previous claymore versions.
Tried swapping the cards around and setting in bios gen1/gen2 ( it should work out of the box )
I have connected the 2 molex connectors on the mobo and also having 6 powered usb risers.
Only time i can get it to go a bit longer is if i have it at stock, but change the Power target to around 60% for all cards.
I have a "wattman" and it says computer is taking 650w from the wall. but thats with low Power target, otherwise it is around 900.
When it crashes, 1 card Always dissapears , both from the miner and from Afterburner ( in AB its there but cant change anything because its grayed out ) resulting in having to reset PC.
Sometimes when it crashes , my monitor that is connected to 1 of the cards also shuts down.
Most of the times i get BSOD after the crash and if that doesnt happen, the whole computer freezes up.
I really want to Think there is enough Power to drive this with 1200w.
Edit : Just Before it crashes, my mouse curser is almost unmovable. Really laggy. But both cpu and memory are far from maxed out.
My cards temp are also not capping, just around 60.
Any ideas ?
My launcher :
timeout /t 60
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
ethdcrminer64.exe -epool eu1.ethermine.org:4444 -ewal Adress.Miner01 -epsw x -mode 1 -tt 68 -allpools 1
pause
Log :
234 1678 NVML: cannot get current temperature, error 15
18:33:16:250 1678 NVML: cannot get fan speed, error 15
18:33:16:862 1780 GPU 1, GpuMiner cu_k1 failed 6, the launch timed out and was terminated
18:33:17:447 33c GPU 5, GpuMiner cu_k1 failed 6, the launch timed out and was terminated
18:33:17:455 167c GPU 0, GpuMiner cu_k1 failed 6, the launch timed out and was terminated
18:33:17:463 f7c GPU 2, GpuMiner cu_k1 failed 6, the launch timed out and was terminated
18:33:17:472 e60 GPU 3, GpuMiner cu_k1 failed 6, the launch timed out and was terminated
18:33:17:481 10bc GPU 4, GpuMiner cu_k1 failed 6, the launch timed out and was terminated
18:33:17:496 1780 GPU 1, GpuMiner kx failed 1
18:33:17:506 33c GPU 5, GpuMiner kx failed 1
18:33:17:516 167c GPU 0, GpuMiner kx failed 1
18:33:17:527 f7c GPU 2, GpuMiner kx failed 1
18:33:17:534 e60 GPU 3, GpuMiner kx failed 1
18:33:17:543 10bc GPU 4, GpuMiner kx failed 1
18:33:17:505 1780 Set global fail flag, failed GPU1
18:33:17:559 1780 GPU 1 failed
18:33:17:523 167c Set global fail flag, failed GPU0
18:33:17:582 167c GPU 0 failed
18:33:17:542 e60 Set global fail flag, failed GPU3
18:33:17:599 e60 GPU 3 failed
18:33:17:516 33c Set global fail flag, failed GPU5
18:33:17:627 33c GPU 5 failed
18:33:17:533 f7c Set global fail flag, failed GPU2
18:33:17:641 f7c GPU 2 failed
18:33:17:550 10bc Set global fail flag, failed GPU4
18:33:17:657 10bc GPU 4 failed
18:33:17:665 177c GPU 1, GpuMiner cu_k1 failed 6, the launch timed out and was terminated
18:33:17:673 bc0 GPU 5, GpuMiner cu_k1 failed 6, the launch timed out and was terminated
18:33:17:687 258 GPU 0, GpuMiner cu_k1 failed 6, the launch timed out and was terminated
18:33:17:701 768 GPU 2, GpuMiner cu_k1 failed 6, the launch timed out and was terminated
18:33:17:711 1170 GPU 3, GpuMiner cu_k1 failed 6, the launch timed out and was terminated
18:33:17:718 e74 GPU 4, GpuMiner cu_k1 failed 6, the launch timed out and was terminated
18:33:17:730 177c GPU 1, GpuMiner kx failed 1
18:33:17:738 bc0 GPU 5, GpuMiner kx failed 1
18:33:17:746 258 GPU 0, GpuMiner kx failed 1
18:33:17:754 768 GPU 2, GpuMiner kx failed 1
18:33:17:773 1170 GPU 3, GpuMiner kx failed 1
18:33:17:780 e74 GPU 4, GpuMiner kx failed 1
18:33:17:737 177c Set global fail flag, failed GPU1
18:33:17:795 177c GPU 1 failed
18:33:17:752 258 Set global fail flag, failed GPU0
18:33:17:821 258 GPU 0 failed
18:33:17:779 1170 Set global fail flag, failed GPU3
18:33:17:841 1170 GPU 3 failed
18:33:17:745 bc0 Set global fail flag, failed GPU5
18:33:17:856 bc0 GPU 5 failed
18:33:17:788 e74 Set global fail flag, failed GPU4
18:33:17:872 e74 GPU 4 failed
18:33:17:771 768 Set global fail flag, failed GPU2
18:33:17:887 768 GPU 2 failed
18:33:19:613 1678 NVML: cannot get current temperature, error 999 (an internal driver error occurred)
18:33:19:629 1678 NVML: cannot get fan speed, error 999 (an internal driver error occurred)
18:33:19:738 1678 NVML: cannot get current temperature, error 999 (an internal driver error occurred)
18:33:19:754 1678 NVML: cannot get fan speed, error 999 (an internal driver error occurred)
18:33:19:848 1678 NVML: cannot get current temperature, error 999 (an internal driver error occurred)
18:33:19:848 1678 NVML: cannot get fan speed, error 999 (an internal driver error occurred)
18:33:19:957 1678 NVML: cannot get current temperature, error 999 (an internal driver error occurred)
18:33:19:957 1678 NVML: cannot get fan speed, error 999 (an internal driver error occurred)
18:33:20:051 1678 NVML: cannot get current temperature, error 999 (an internal driver error occurred)
18:33:20:051 1678 NVML: cannot get fan speed, error 999 (an internal driver error occurred)
18:33:20:145 1678 NVML: cannot get current temperature, error 999 (an internal driver error occurred)
18:33:20:145 1678 NVML: cannot get fan speed, error 999 (an internal driver error occurred)
18:33:20:238 1678 NVML: cannot get current temperature, error 999 (an internal driver error occurred)
18:33:20:238 1678 NVML: cannot get fan speed, error 999 (an internal driver error occurred)
18:33:20:332 1678 NVML: cannot get current temperature, error 999 (an internal driver error occurred)
18:33:20:332 1678 NVML: cannot get fan speed, error 999 (an internal driver error occurred)
18:33:20:426 1678 NVML: cannot get current temperature, error 999 (an internal driver error occurred)
18:33:20:426 1678 NVML: cannot get fan speed, error 999 (an internal driver error occurred)
18:33:20:520 1678 NVML: cannot get current temperature, error 999 (an internal driver error occurred)
18:33:20:520 1678 NVML: cannot get fan speed, error 999 (an internal driver error occurred)
18:33:20:613 1678 NVML: cannot get current temperature, error 999 (an internal driver error occurred)
18:33:20:613 1678 NVML: cannot get fan speed, error 999 (an internal driver error occurred)
18:33:20:707 1678 NVML: cannot get current temperature, error 999 (an internal driver error occurred)
18:33:20:707 1678 NVML: cannot get fan speed, error 999 (an internal driver error occurred)
July 09, 2017, 12:19:12 PM
i wonder if anyone compared claymore with older version and other mining software, is that really amd hardware problem or someone pay to criple it?
I think the architectural changes, on top of the drivers issues that Vega currently is having is the most likely culprit.
July 09, 2017, 12:16:15 PM
i wonder if anyone compared claymore with older version and other mining software, is that really amd hardware problem or someone pay to criple it?
July 09, 2017, 12:07:30 PM
My 1060 rigs went from 613MH/s total to 640MH/s total with v9.7.
Thanks Claymore.
Thanks Claymore.
July 09, 2017, 11:58:10 AM
So suddenly im getting windows defender saying "ethdcrminer.exe has been blocked from accessing graphics hardware" ive added the folder and the individual .exe to the windows defender exclusion list but its still happening. Can someone help please?
My Antivirus program Webroot SecureAnywhere reports always that Claymore's miner is a Trojan, but this is a false positive alert.
Have set in SecureAnywhere the miner as allowed exception.
July 09, 2017, 11:52:04 AM
So suddenly im getting windows defender saying "ethdcrminer.exe has been blocked from accessing graphics hardware" ive added the folder and the individual .exe to the windows defender exclusion list but its still happening. Can someone help please?
July 09, 2017, 11:38:32 AM
If I understand correctly, the DAG is meant to be randomised on the fly, but I wanted to know 2 things :-
1) Is it possible to manually set the DAG Epoch?
or
2) Does anyone perhaps have an idea what is causing this issue?
Where did you hear that? Since I started mining its only going up
July 09, 2017, 11:23:04 AM
Hey all,
I hope you have all been having a great weekend.
So when playing around with two 7970's I have laying around, I noticed what seems to be a relation between the DAG Epoch # set and my hashrate when running Claymore's EthDcrMiner using Nicehas running either Daggerdecred or Daggerhashimoto.
The miner has a tendency to set DAG Epoch #133 or #135, achieving a hashrate of say 25mh/s. However, when the miner sets DAG Epoch #1 (happens maybe 1/20 startups), the hashrate pretty much doubles.
If I understand correctly, the DAG is meant to be randomised on the fly, but I wanted to know 2 things :-
1) Is it possible to manually set the DAG Epoch?
or
2) Does anyone perhaps have an idea what is causing this issue?
I hope you have all been having a great weekend.
So when playing around with two 7970's I have laying around, I noticed what seems to be a relation between the DAG Epoch # set and my hashrate when running Claymore's EthDcrMiner using Nicehas running either Daggerdecred or Daggerhashimoto.
The miner has a tendency to set DAG Epoch #133 or #135, achieving a hashrate of say 25mh/s. However, when the miner sets DAG Epoch #1 (happens maybe 1/20 startups), the hashrate pretty much doubles.
If I understand correctly, the DAG is meant to be randomised on the fly, but I wanted to know 2 things :-
1) Is it possible to manually set the DAG Epoch?
or
2) Does anyone perhaps have an idea what is causing this issue?
July 09, 2017, 10:56:36 AM
GPU 3, GpuMiner cu_k01 failed 73, an illegal instruction was encountered
GPU 3, GpuMiner kx failed 1
GPU 4, GpuMiner cu_k01 failed 73, an illegal instruction was encountered
GPU 4, GpuMiner kx failed 1
GPU 3 failed
GPU 2, GpuMiner cu_k01 failed 73, an illegal instruction was encountered
GPU 2, GpuMiner kx failed 1
GPU 0, GpuMiner cu_k01 failed 73, an illegal instruction was encountered
GPU 0, GpuMiner kx failed 1
GPU 1, GpuMiner cu_k01 failed 73, an illegal instruction was encountered
GPU 1, GpuMiner kx failed 1
GPU 3, GpuMiner cu_k01 failed 73, an illegal instruction was encountered
GPU 3, GpuMiner kx failed 1
GPU 2 failed
GPU 0 failed
GPU 5, GpuMiner cu_k01 failed 73, an illegal instruction was encountered
GPU 3 failed
GPU 2, GpuMiner cu_k01 failed 73, an illegal instruction was encountered
GPU 2, GpuMiner kx failed 1
GPU 0, GpuMiner cu_k01 failed 73, an illegal instruction was encountered
GPU 0, GpuMiner kx failed 1
GPU 1, GpuMiner cu_k01 failed 73, an illegal instruction was encountered
GPU 1, GpuMiner kx failed 1
GPU 4 failed
GPU 2 failed
GPU 0 failed
GPU 1 failed
GPU 4, GpuMiner cu_k01 failed 73, an illegal instruction was encountered
GPU 4, GpuMiner kx failed 1
GPU 5, GpuMiner kx failed 1
GPU 6, GpuMiner cu_k01 failed 73, an illegal instruction was encountered
GPU 6, GpuMiner kx failed 1
GPU 4 failed
GPU 1 failed
GPU 6 failed
GPU 6, GpuMiner cu_k01 failed 73, an illegal instruction was encountered
GPU 6, GpuMiner kx failed 1
GPU 5 failed
GPU 6 failed
GPU 5, GpuMiner cu_k01 failed 73, an illegal instruction was encountered
GPU 5, GpuMiner kx failed 1
GPU 5 failed
6x msi gtx 1060 3gb gt oc (hynix ram)
1x galax gtx 1060 3gb (samsung)
win 10 64 bit
nvidia 384.76
8gb ddr4 ram
v9.6 no problem
v9.7
?
GPU 3, GpuMiner kx failed 1
GPU 4, GpuMiner cu_k01 failed 73, an illegal instruction was encountered
GPU 4, GpuMiner kx failed 1
GPU 3 failed
GPU 2, GpuMiner cu_k01 failed 73, an illegal instruction was encountered
GPU 2, GpuMiner kx failed 1
GPU 0, GpuMiner cu_k01 failed 73, an illegal instruction was encountered
GPU 0, GpuMiner kx failed 1
GPU 1, GpuMiner cu_k01 failed 73, an illegal instruction was encountered
GPU 1, GpuMiner kx failed 1
GPU 3, GpuMiner cu_k01 failed 73, an illegal instruction was encountered
GPU 3, GpuMiner kx failed 1
GPU 2 failed
GPU 0 failed
GPU 5, GpuMiner cu_k01 failed 73, an illegal instruction was encountered
GPU 3 failed
GPU 2, GpuMiner cu_k01 failed 73, an illegal instruction was encountered
GPU 2, GpuMiner kx failed 1
GPU 0, GpuMiner cu_k01 failed 73, an illegal instruction was encountered
GPU 0, GpuMiner kx failed 1
GPU 1, GpuMiner cu_k01 failed 73, an illegal instruction was encountered
GPU 1, GpuMiner kx failed 1
GPU 4 failed
GPU 2 failed
GPU 0 failed
GPU 1 failed
GPU 4, GpuMiner cu_k01 failed 73, an illegal instruction was encountered
GPU 4, GpuMiner kx failed 1
GPU 5, GpuMiner kx failed 1
GPU 6, GpuMiner cu_k01 failed 73, an illegal instruction was encountered
GPU 6, GpuMiner kx failed 1
GPU 4 failed
GPU 1 failed
GPU 6 failed
GPU 6, GpuMiner cu_k01 failed 73, an illegal instruction was encountered
GPU 6, GpuMiner kx failed 1
GPU 5 failed
GPU 6 failed
GPU 5, GpuMiner cu_k01 failed 73, an illegal instruction was encountered
GPU 5, GpuMiner kx failed 1
GPU 5 failed
6x msi gtx 1060 3gb gt oc (hynix ram)
1x galax gtx 1060 3gb (samsung)
win 10 64 bit
nvidia 384.76
8gb ddr4 ram
v9.6 no problem
v9.7
? July 09, 2017, 10:48:42 AM
6x MSI GeForce GTX 1070 Armor OC
Driver: 384.76
Win10 x64 (latest upds)
Ether only.
GPU: 1750
RAM: 2225
TDP: 60%
Consume: 770W
v9.6: 180 MH/s
v9.7: 187 MH/s
Cheers.
Driver: 384.76
Win10 x64 (latest upds)
Ether only.
GPU: 1750
RAM: 2225
TDP: 60%
Consume: 770W
v9.6: 180 MH/s
v9.7: 187 MH/s
Cheers.
July 09, 2017, 10:43:21 AM
WOW! I'm running 7 1070's and picked up another 10MHS with the new release!!
Jump to: