Hi Claymore
Works great here with 7 x 1070 MSI ARMOR X 8G !!!
Power limit is 125W per GPU
Dual mining ETH/SC
with 9_5:
dcri=55
ETH= 190Mh/s
SC=3470 Mh/s
with 9_7:
dcri=62
ETH= 198Mh/s
SC= 4081 Mh/s
Which give +6,19% Gain !!!
smooth and sailing, GPU's temperature equal
Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 758. (Read 6590565 times)
July 08, 2017, 08:18:11 PM
July 08, 2017, 07:51:47 PM
Great stuff.
GTX 1070's went from 30.16 Mh/s (total of 181 between 6 cards). To 31.17 Mh/s each (total of around 187.5 Mh/s).
GTX 1070's went from 30.16 Mh/s (total of 181 between 6 cards). To 31.17 Mh/s each (total of around 187.5 Mh/s).
July 08, 2017, 05:51:50 PM
I see Nvidia optimization.
But when you will made Radeon optimization?
Red army a lot more bigger then Green.
But when you will made Radeon optimization?
Red army a lot more bigger then Green.
July 08, 2017, 05:28:22 PM
This version was well worth the wait!
I've gone from 23.5mh/s to 24.9mh/s for my 1060 3gb.
I'd say the only problem is it's not very consistent. Hash rate fluctuates a lot as low as 24.2 mh/s, don't know if that's normal.
I've gone from 23.5mh/s to 24.9mh/s for my 1060 3gb.
I'd say the only problem is it's not very consistent. Hash rate fluctuates a lot as low as 24.2 mh/s, don't know if that's normal.
July 08, 2017, 04:59:22 PM
@Claymore, thanks for update but for rx 460 on 9.6 was 13.9 mh/s in exp/dcr dual mode and now it drops to 13.6 mh/s on 9.7 with same -dcri 18. Second coin has raised almost double that`s good.
July 08, 2017, 04:57:53 PM
Hello,
A quick question from me. Currently I'm on GTX970 + Windows 10 v1703 + Claymore 9.6. For mining purposes I'm forced to use Nvidia 347.52 driver. Unfortunately, in order to use my GPU in Adobe Premiere I need newer drivers, so everytime I switch from work to mining, I have to uninstall/install GPU drivers. It's not that big of a problem, but now I would like to add another Nvidia GPU, so that I could use one for work and the other one just for mining at the same time. However, with old Nvidia GPU drivers it won't be possible. Is there any workaround for this issue ?
Thanks !
A quick question from me. Currently I'm on GTX970 + Windows 10 v1703 + Claymore 9.6. For mining purposes I'm forced to use Nvidia 347.52 driver. Unfortunately, in order to use my GPU in Adobe Premiere I need newer drivers, so everytime I switch from work to mining, I have to uninstall/install GPU drivers. It's not that big of a problem, but now I would like to add another Nvidia GPU, so that I could use one for work and the other one just for mining at the same time. However, with old Nvidia GPU drivers it won't be possible. Is there any workaround for this issue ?
Thanks !
July 08, 2017, 04:50:35 PM
Dear Claymore,
do you have any updated information for RX GPU eth epoch problem ?
http://www.legitreviews.com/ethereum-hashrate-performance-drop-might-coming-amd-nvidia-gpus-tested_195702
http://1stminingrig.com/amd-radeon-rx-400-rx-500-will-be-no-longer-profitable-for-ethereum-mining/
https://www.techpowerup.com/234482/eth-mining-lower-vram-gpus-to-be-rendered-unprofitable-in-time
is this true (TLB) ? can we make another method without TLB (Translation Lookaside Buffer) cache?
do you have any updated information for RX GPU eth epoch problem ?
http://www.legitreviews.com/ethereum-hashrate-performance-drop-might-coming-amd-nvidia-gpus-tested_195702
http://1stminingrig.com/amd-radeon-rx-400-rx-500-will-be-no-longer-profitable-for-ethereum-mining/
https://www.techpowerup.com/234482/eth-mining-lower-vram-gpus-to-be-rendered-unprofitable-in-time
is this true (TLB) ? can we make another method without TLB (Translation Lookaside Buffer) cache?
July 08, 2017, 04:29:40 PM
Eth+sia - 31.9 + 450 mhs on 1070 with 70% TDP. I like it.
Thx Claymore.
Win 7, Gainward 1070 (best cooler from all geforce cards) - 47C with 46% fans
Thx Claymore.
Win 7, Gainward 1070 (best cooler from all geforce cards) - 47C with 46% fans
July 08, 2017, 04:10:34 PM
Thanks tried it on my GTX 1070. Up to par with ethminer. speeds now
For dual mining I get quite some ETH hashrate drop for little DCR, so for now dual mining on my gtx 1070 is a no go.
For dual mining I get quite some ETH hashrate drop for little DCR, so for now dual mining on my gtx 1070 is a no go.
well, dual-mining with gtx1070 still disappointed results ...
It depends on GPU, settings, selected coin, it's price and net diff. For example, for SIA on stock 1070 ccminer shows 1400MH/s. In dual mode in v9.7 I get 650MH/s SIA (so 45% of pure SIA speed) with only 2% ETH lost (about 25.8MH/s instead of 26.4MH/s).
DCR speed is not so good, agreed.
July 08, 2017, 04:07:17 PM
well, dual-mining with gtx1070 still disappointed results ...
July 08, 2017, 03:52:47 PM
Thanks Claymore! Getting similar hash to ethminer now with 9.7.
July 08, 2017, 03:39:32 PM
v9.7:
- Added ASM mode for RX460/560 cards, up to 30% speedup for second coin in dual mode.
- Improved ETH speed for some Nvidia cards.
- Improved speed in dual mode for Nvidia cards.
- reduced initialization time.
- a few minor bug fixes and improvements.
- EthMan: added ability to select several rigs.
- EthMan: several minor bug fixes and improvements.
- Added ASM mode for RX460/560 cards, up to 30% speedup for second coin in dual mode.
- Improved ETH speed for some Nvidia cards.
- Improved speed in dual mode for Nvidia cards.
- reduced initialization time.
- a few minor bug fixes and improvements.
- EthMan: added ability to select several rigs.
- EthMan: several minor bug fixes and improvements.
Thank you very much Claymore, now this might be one of the greatest versions.
July 08, 2017, 03:32:47 PM
9.7 update increased speed on my 1070 by ~1mh/s
July 08, 2017, 03:28:12 PM
v9.7:
- Added ASM mode for RX460/560 cards, up to 30% speedup for second coin in dual mode.
- Improved ETH speed for some Nvidia cards.
- Improved speed in dual mode for Nvidia cards.
- reduced initialization time.
- a few minor bug fixes and improvements.
- EthMan: added ability to select several rigs.
- EthMan: several minor bug fixes and improvements.
- Added ASM mode for RX460/560 cards, up to 30% speedup for second coin in dual mode.
- Improved ETH speed for some Nvidia cards.
- Improved speed in dual mode for Nvidia cards.
- reduced initialization time.
- a few minor bug fixes and improvements.
- EthMan: added ability to select several rigs.
- EthMan: several minor bug fixes and improvements.
Thanks tried it on my GTX 1070. Up to par with ethminer. speeds now
For dual mining I get quite some ETH hashrate drop for little DCR, so for now dual mining on my gtx 1070 is a no go.
July 08, 2017, 03:20:26 PM
I've been having an issue with My PC crashing after a few hours of running the Miner. It has only started recently as I have been using the Miner for a while now. No real changes have been made, no new windows updates have been installed. There is nothing listed in event viewer so I don't know where to start. What happens is at any given moment the display will go out/the system will crash, the pc fans will start running at max and the only thing you can do is reboot the machine. I've been using custom bios on the cards without an issue and the issue happens whether I'm OCed or not. After a few hours it crashes, sometimes sooner. It's annoying because if I'm asleep or away from the computer, 90% of the time when I come back the computer is in that crashed state.
July 08, 2017, 02:07:59 PM
I am minning with RX 470 in 20.560 MH/S but later 4 hours, the hash rate down to 16, why? if i restart claymore it fixed, but i dont want restart! i want run forever :/
any idea?
SO: Windows 7 x64 Ultimate
4 GB ram DDR2
Intel core 2 duo
775 Motherboard
320 GB HDD
any idea?
SO: Windows 7 x64 Ultimate
4 GB ram DDR2
Intel core 2 duo
775 Motherboard
320 GB HDD
Have u overclocked the gpu?
no, i put afterburner the last week, but the card die if is OC, (cross window, rare colors and restart) so i have now in factory setings
July 08, 2017, 01:31:34 PM
v9.7:
- Added ASM mode for RX460/560 cards, up to 30% speedup for second coin in dual mode.
- Improved ETH speed for some Nvidia cards.
- Improved speed in dual mode for Nvidia cards.
- reduced initialization time.
- a few minor bug fixes and improvements.
- EthMan: added ability to select several rigs.
- EthMan: several minor bug fixes and improvements.
- Added ASM mode for RX460/560 cards, up to 30% speedup for second coin in dual mode.
- Improved ETH speed for some Nvidia cards.
- Improved speed in dual mode for Nvidia cards.
- reduced initialization time.
- a few minor bug fixes and improvements.
- EthMan: added ability to select several rigs.
- EthMan: several minor bug fixes and improvements.
July 08, 2017, 01:23:38 PM
During final tests I noticed some problems, so I have to postpone new version for a day.
@Claymore - very grateful for improvements in EthManager. The last version is almost perfect for me.
I would like to make a suggestion - if it's possible and doable. Can you some how add in the 'Events' new one - for incorrect share (due to too much overclocking)? Maybe in some of the updates to come?
I am not even sure why this happen, but sometimes some rig starts to give way too much incorrect shares. And after a PC restart - all goes back to normal.
July 08, 2017, 01:07:47 PM
Claymore starts up with no problems and runs for days but every time I try to startup in benchmark the miner crashes as soon as I double click the bat file the miner opens than the win box pops up this program failed I'm running win 10 its set at 16gb I also have 8 gigs of memory btc pro board all msi rx470 does anyone have a suggestion thanks
July 08, 2017, 01:05:37 PM
I am minning with RX 470 in 20.560 MH/S but later 4 hours, the hash rate down to 16, why? if i restart claymore it fixed, but i dont want restart! i want run forever :/
any idea?
SO: Windows 7 x64 Ultimate
4 GB ram DDR2
Intel core 2 duo
775 Motherboard
320 GB HDD
any idea?
SO: Windows 7 x64 Ultimate
4 GB ram DDR2
Intel core 2 duo
775 Motherboard
320 GB HDD
Have u overclocked the gpu?
Jump to: