Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 762. (Read 6590565 times)
July 07, 2017, 12:46:13 PM
I'm ready with a short video about my "Claymore Ether Rig". I gave full specs here too: https://youtu.be/u09bJLtTNNU
July 07, 2017, 12:31:36 PM
New version will be released within 24 hours.
Good speedup in dual mode for AMD RX460/560 cards.
Good speedup in dual mode for Nvidia cards, some speedup in ETH-only mode for some cards.
Good speedup in dual mode for AMD RX460/560 cards.
Good speedup in dual mode for Nvidia cards, some speedup in ETH-only mode for some cards.
DAG updates Mr C or no news from the Frontlines?
No news yet.
@Claymore, can i use ESTALE: 0 in epools or i can use it only in the config?
You cannot use it in epools.txt.
Is there any chance to add it to epools, its pool related parameter so it makes sense to be there i think...
July 07, 2017, 12:11:28 PM
... to go further then -100mV in MSI Afterburner for my R9 290. 50W less power consumption ..
Use Wattman in the AMD Settings and you should be able to set it as low as possible. Or BIOS-mod the card.
July 07, 2017, 12:10:26 PM
If I use -asm 2 -dcri 65, my reported hashrate increases slightly but my effective hashrate is incredibly sporadic.
Any reason for this?
Any reason for this?
July 07, 2017, 12:03:20 PM
Mr. Claymore, do you need my log file of crashed ETH mining with AMD Vega for bug fixing in your miners?
I tested your ZCash miner too, same issue.
Thanks.
-swisstrader
I tested your ZCash miner too, same issue.
Thanks.
-swisstrader
July 07, 2017, 11:25:24 AM
New version will be released within 24 hours.
Good speedup in dual mode for AMD RX460/560 cards.
Good speedup in dual mode for Nvidia cards, some speedup in ETH-only mode for some cards.
Good speedup in dual mode for AMD RX460/560 cards.
Good speedup in dual mode for Nvidia cards, some speedup in ETH-only mode for some cards.
DAG updates Mr C or no news from the Frontlines?
No news yet.
@Claymore, can i use ESTALE: 0 in epools or i can use it only in the config?
You cannot use it in epools.txt.
July 07, 2017, 11:20:46 AM
@Claymore, can i use ESTALE: 0 in epools or i can use it only in the config?
July 07, 2017, 11:14:48 AM
New version will be released within 24 hours.
Good speedup in dual mode for AMD RX460/560 cards.
Good speedup in dual mode for Nvidia cards, some speedup in ETH-only mode for some cards.
Good speedup in dual mode for AMD RX460/560 cards.
Good speedup in dual mode for Nvidia cards, some speedup in ETH-only mode for some cards.
Will there be speed up for AMD R9 390?
July 07, 2017, 10:58:12 AM
New version will be released within 24 hours.
Good speedup in dual mode for AMD RX460/560 cards.
Good speedup in dual mode for Nvidia cards, some speedup in ETH-only mode for some cards.
Good speedup in dual mode for AMD RX460/560 cards.
Good speedup in dual mode for Nvidia cards, some speedup in ETH-only mode for some cards.
*Faints*
<3
July 07, 2017, 10:12:09 AM
New version will be released within 24 hours.
Good speedup in dual mode for AMD RX460/560 cards.
Good speedup in dual mode for Nvidia cards, some speedup in ETH-only mode for some cards.
Good speedup in dual mode for AMD RX460/560 cards.
Good speedup in dual mode for Nvidia cards, some speedup in ETH-only mode for some cards.
DAG updates Mr C or no news from the Frontlines?
July 07, 2017, 10:08:47 AM
New version will be released within 24 hours.
Good speedup in dual mode for AMD RX460/560 cards.
Good speedup in dual mode for Nvidia cards, some speedup in ETH-only mode for some cards.
Good speedup in dual mode for AMD RX460/560 cards.
Good speedup in dual mode for Nvidia cards, some speedup in ETH-only mode for some cards.
July 07, 2017, 09:15:28 AM
AMD and NVIDIA? 
July 07, 2017, 09:13:42 AM
Mr Claymore any timeline for the rx560 1060 updates
July 07, 2017, 09:11:06 AM
Something new with the droping hashrate on Radeon cards ?
yes, dump claymore use sgminer instead.
No DAG issue with sgminer? Are you sure?
Bits be trippin bullshit. Probably sgminer has the same issue. Credibility of BBT is now sub zero
Someone really have to test SGminer to end this . no need to have a benchmark just run with current dag and compare the results with claymore for same dag
July 07, 2017, 09:08:59 AM
Something new with the droping hashrate on Radeon cards ?
yes, dump claymore use sgminer instead.
No DAG issue with sgminer? Are you sure?
Bits be trippin bullshit. Probably sgminer has the same issue. Credibility of BBT is now sub zero
Someone really have to test SGminer to end this . no need to have a benchmark just run with current dag and compare the results with claymore for same dag
July 07, 2017, 09:06:32 AM
I'm hoping someone can help me.
I'd like to set my GPU's clock and voltage settings. I can do it for the first card and I thought that I would be able to separate the second, third, fourth cards settings with a comma, but it's not working. It only sets the setting for the first card.
Example of what I'm currently using:
-cclock 1112,1112 -mclock 2000,2000 -cvddc 860,860 -mvddc 900,900
I'd like to set my GPU's clock and voltage settings. I can do it for the first card and I thought that I would be able to separate the second, third, fourth cards settings with a comma, but it's not working. It only sets the setting for the first card.
Example of what I'm currently using:
-cclock 1112,1112 -mclock 2000,2000 -cvddc 860,860 -mvddc 900,900
atiwinflash, gpu-z, polarisbioseditor
...and don't expect the cards to work under Windows without first taking sledge hammer to the Windows driver digital signatures, use Ubuntu instead and avoid that mess.
I've already made custom bioses. I don't go as extreme with the bios settings as I do with the settings in windows for stability reasons. I once has a card that was bricked by apply settings via bios mod that worked in claymore.
My questions is why cannot I not set the settings for multiple cards like I'm supposed to be able to with the claymore bat file? Only the first card will take the settings
Also worth noting that it only shows the temperature of the first card, yet all cards are hashing.
That usually happens when crossfire is on.
THANKS! This was the problem.
July 07, 2017, 08:57:22 AM
It's a little bit offtopic, but is there anyway to go further then -100mV in MSI Afterburner for my R9 290. 50W less power consumption until now and everything stable for me.
July 07, 2017, 08:24:59 AM
Something new with the droping hashrate on Radeon cards ?
yes, dump claymore use sgminer instead.
No DAG issue with sgminer? Are you sure?
Bits be trippin bullshit. Probably sgminer has the same issue. Credibility of BBT is now sub zero
July 07, 2017, 05:42:18 AM
Today I got the beast - AMD Radeon Vega FE 16GB.
Does somebody know why mining with Claymore's ETH miner isn't working?
I've set -etha 0 as reported by miner.
I need to know which hash rate we can get with this newest GPU.
Thank you in advance for a reply.
-swisstrader
https://s12.postimg.org/8iffawn31/IMG_3170.jpg
Does somebody know why mining with Claymore's ETH miner isn't working?
I've set -etha 0 as reported by miner.
I need to know which hash rate we can get with this newest GPU.
Thank you in advance for a reply.
-swisstrader
https://s12.postimg.org/8iffawn31/IMG_3170.jpg
What happens if you disable assembler mode?
Thanks for the input. Did it and no success.
"Cannot build OpenCL program for GPU 0" and "GPU0, OpenCL error -48 (0) - cannot create DAG on GPU"
Any help from Claymore?
Thanks.
July 07, 2017, 03:30:25 AM
I'm having sort of the same problem. After a few hours the miner restarts mining and I have to manually set the priority to Real Time in the task manager to have constant hash rate on all cards.
Are there any commands that I can put in the batch file to set the EthDcrMiner64.exe as priority realtime?
Using Windows 10 x64 updated.
Thanks
Are there any commands that I can put in the batch file to set the EthDcrMiner64.exe as priority realtime?
Using Windows 10 x64 updated.
Thanks
Jump to: