Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 775.

emmettoc

full member

Activity: 131

Merit: 100

Quote from: comp on July 01, 2017, 06:42:43 AM

Still claymore has a DAG issue to solve that is not there in sgminer running on linux

Claymore requested complainers to upload the evidence on YouTube.

nils8107

newbie

Activity: 22

Merit: 0

Quote from: hcwh on July 01, 2017, 06:40:37 AM

Quote from: achalmersman on June 30, 2017, 11:22:48 PM

Quote from: Jpopple on June 30, 2017, 10:07:27 PM

Ok so I have 2 x gtx 970s and 2 x gtx 1060s. Windows 10 how can I possibly run all four at the same time? They use two different video drivers?

I'm a newb but to my knowledge you can't. I started with a 970 and got it hashing 19 MH/s but was unable to use it and the 1070s I started buying. I only have 10xx series cards in my windows machine now. My Linux rig runs 1070s, 1060s and 1 970s all without any trouble however I cannot figure out how to overclock the 970 in Linux so its running around 18.5 MH/s. But at least its running and I can control the fan speed. The 10xx series cards all overclock via server-x settings without any problem

What are you using to overclock 10xx cards in Linux and what hash rate are you getting with that? Are you putting things in xorg.conf that you can share or are you changing in the GUI nvidia-settings? I changed in the GUI, but it didn't have any effect. Or are you executing on the command line?

Hi

I also have 2X1070 8GB and 1X 970 in my Rig.

the 2 1070 makes 29MH/s while the 970 only makes 2.3MH/s

Is there any solution? Windows 10 64bit, latest Nvidia driver. Claymore's 9.6

Thank You

comp

member

Activity: 112

Merit: 10

Still claymore has a DAG issue to solve that is not there in sgminer running on linux

hcwh

newbie

Activity: 24

Merit: 0

Quote from: achalmersman on June 30, 2017, 11:22:48 PM

Quote from: Jpopple on June 30, 2017, 10:07:27 PM

Ok so I have 2 x gtx 970s and 2 x gtx 1060s. Windows 10 how can I possibly run all four at the same time? They use two different video drivers?

I'm a newb but to my knowledge you can't. I started with a 970 and got it hashing 19 MH/s but was unable to use it and the 1070s I started buying. I only have 10xx series cards in my windows machine now. My Linux rig runs 1070s, 1060s and 1 970s all without any trouble however I cannot figure out how to overclock the 970 in Linux so its running around 18.5 MH/s. But at least its running and I can control the fan speed. The 10xx series cards all overclock via server-x settings without any problem

What are you using to overclock 10xx cards in Linux and what hash rate are you getting with that? Are you putting things in xorg.conf that you can share or are you changing in the GUI nvidia-settings? I changed in the GUI, but it didn't have any effect. Or are you executing on the command line?

lsszmeja

newbie

Activity: 13

Merit: 0

https://www.reddit.com/r/EtherMining/comments/6jjhob/ethereum_code_optimized_for_some_nvidian_cards/

will claymore miner have the boosted settings for nvidas??

antonio2234

member

Activity: 95

Merit: 10

Who is Clymore responsible here?? Angry

I am getting CUDA and DAG error.

boysie

newbie

Activity: 43

Merit: 0

Quote from: boysie on July 01, 2017, 01:27:46 AM

Quote from: boysie on June 30, 2017, 04:05:56 PM

Not working with Vega :9 using 9.6

21:00:54:687   19c8   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
21:00:54:689   19c8   º Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.6 º
21:00:54:691   19c8   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ¼
21:00:54:694   19c8
21:00:54:897   19c8   ETH: 1 pool is specified
21:00:54:900   19c8   Main Ethereum pool is eu1-etc.ethermine.org:4444
21:00:54:903   19c8   DCR: 0 pool is specified
21:00:54:966   19c8   OpenCL platform: AMD Accelerated Parallel Processing
21:00:54:969   19c8   OpenCL initializing...

21:00:54:973   19c8   AMD Cards available: 1
21:00:54:976   19c8   GPU #0: gfx900, 16192 MB available, 64 compute units
21:00:54:979   19c8   POOL/SOLO version
21:00:54:981   19c8   b365
21:00:54:983   19c8   Platform: Windows
21:00:55:030   19c8   start building OpenCL program for GPU 0...
21:00:55:055   19c8   done
21:00:55:160   19c8   Error: AMD HSA Code Object loading failed.

So not a claymore issue looks like a windows driver issue with all openCL with the vega.

I've tried a lot of miners now and not 1 works, new OS, new mobo, so seems we are going to be a while before we get a proper working vega on windows.

Nice on AMD Sad

Boysie

errors:

AMD Cards available: 1
GPU #0: gfx900, 16192 MB available, 64 compute units
POOL/SOLO version
Cannot build OpenCL program for GPU 0
GPU #0: set -etha as 0 (ETH algo for fast cards)
No NVIDIA CUDA GPUs detected.
Total cards: 1
ETH: Stratum - connecting to 'eu1-etc.ethermine.org' <94.23.45.111> port 4444
ETH: Stratum - Connected (eu1-etc.ethermine.org:4444)
ETH: Authorized
No pool specified for Decred! Ethereum-only mining mode is enabled
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: eth-proxy stratum mode
Watchdog enabled
Remote management is enabled on port 4028

Setting DAG epoch #133...
Setting DAG epoch #133 for GPU0
Create GPU buffer for GPU0
GPU0, OpenCL error -48 (0) - cannot create DAG on GPU
GPU 0 failed
Setting DAG epoch #133 for GPU0
GPU0, OpenCL error -48 (0) - cannot create DAG on GPU

Getting identical issue with Linux (Ubuntu 16.04) Sad

boysie

newbie

Activity: 43

Merit: 0

Quote from: boysie on June 30, 2017, 04:05:56 PM

Not working with Vega :9 using 9.6

21:00:54:687   19c8   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
21:00:54:689   19c8   º Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.6 º
21:00:54:691   19c8   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ¼
21:00:54:694   19c8
21:00:54:897   19c8   ETH: 1 pool is specified
21:00:54:900   19c8   Main Ethereum pool is eu1-etc.ethermine.org:4444
21:00:54:903   19c8   DCR: 0 pool is specified
21:00:54:966   19c8   OpenCL platform: AMD Accelerated Parallel Processing
21:00:54:969   19c8   OpenCL initializing...

21:00:54:973   19c8   AMD Cards available: 1
21:00:54:976   19c8   GPU #0: gfx900, 16192 MB available, 64 compute units
21:00:54:979   19c8   POOL/SOLO version
21:00:54:981   19c8   b365
21:00:54:983   19c8   Platform: Windows
21:00:55:030   19c8   start building OpenCL program for GPU 0...
21:00:55:055   19c8   done
21:00:55:160   19c8   Error: AMD HSA Code Object loading failed.

So not a claymore issue looks like a windows driver issue with all openCL with the vega.

I've tried a lot of miners now and not 1 works, new OS, new mobo, so seems we are going to be a while before we get a proper working vega on windows.

Nice on AMD Sad

Boysie

errors:

AMD Cards available: 1
GPU #0: gfx900, 16192 MB available, 64 compute units
POOL/SOLO version
Cannot build OpenCL program for GPU 0
GPU #0: set -etha as 0 (ETH algo for fast cards)
No NVIDIA CUDA GPUs detected.
Total cards: 1
ETH: Stratum - connecting to 'eu1-etc.ethermine.org' <94.23.45.111> port 4444
ETH: Stratum - Connected (eu1-etc.ethermine.org:4444)
ETH: Authorized
No pool specified for Decred! Ethereum-only mining mode is enabled
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: eth-proxy stratum mode
Watchdog enabled
Remote management is enabled on port 4028

Setting DAG epoch #133...
Setting DAG epoch #133 for GPU0
Create GPU buffer for GPU0
GPU0, OpenCL error -48 (0) - cannot create DAG on GPU
GPU 0 failed
Setting DAG epoch #133 for GPU0
GPU0, OpenCL error -48 (0) - cannot create DAG on GPU

antonio2234

member

Activity: 95

Merit: 10

I have problem with my 4x1070.
Nvidia Driver version: 368.81
Windows 10.
My virtual memory: Min 18,000 MB and max 25,000 on drive C (windows).

xxoanser

newbie

Activity: 16

Merit: 0

Quote from: thameur on June 30, 2017, 03:06:01 PM

goodbye DAG Grin

I found solution to have full hashrate with Claymore, Strix R9 390 @ 32.3 Mh/s in ETH temperature 70°C

Share the solution please

achalmersman

newbie

Activity: 17

Merit: 0

Quote from: Jpopple on June 30, 2017, 10:07:27 PM

Ok so I have 2 x gtx 970s and 2 x gtx 1060s. Windows 10 how can I possibly run all four at the same time? They use two different video drivers?

I'm a newb but to my knowledge you can't. I started with a 970 and got it hashing 19 MH/s but was unable to use it and the 1070s I started buying. I only have 10xx series cards in my windows machine now. My Linux rig runs 1070s, 1060s and 1 970s all without any trouble however I cannot figure out how to overclock the 970 in Linux so its running around 18.5 MH/s. But at least its running and I can control the fan speed. The 10xx series cards all overclock via server-x settings without any problem

FFI2013

hero member

Activity: 906

Merit: 507

I'm sure this has been asked before in the last 600 something pages but I keep seeing incorrect eth shares gpu 1 and 2 what exactly does this mean the submitted share count is off or is there a problem with those 2 gpus one is a 290 and the other 390 win 10 15.12 drivers thanks

Jpopple

newbie

Activity: 27

Merit: 0

Ok so I have 2 x gtx 970s and 2 x gtx 1060s. Windows 10 how can I possibly run all four at the same time? They use two different video drivers?

notbatman

legendary

Activity: 2212

Merit: 1038

oh, 16GB with 64 cores....

edit:

it's called the frontier edition and has some triangles on it, lol.

jackbox

legendary

Activity: 1246

Merit: 1024

Quote from: burgla7711 on June 30, 2017, 09:45:10 PM

So i know this post is for Claymore miner, but i was having such issues, I moved to nicehash, does anyone else on here use nicehash with multiple gpus. It benchmarks all the algo's fine. When i go to start, it starts mining and then 20-30 min into mining the computer locks up. It doesn't turn off , or give any error message. It just locks , no mouse or keyboard. I have to then hard shut down the pc, and start mining over and it does it again. I don't know if it is certain algo's causing it or not, i tried most of them individually and it seems to do the same thing. I just want my rig mining already and i am having so many issues with the software configuration. any help is appreciated. Even if it is claymore code that will allow me to mine nicehash stratum links.

When mining any Ethash coin Nicehash miner uses Claymore so you have accomplished nothing. It is just a shell running the typical mining software depending on coin being mined.

burgla7711

newbie

Activity: 14

Merit: 0

So i know this post is for Claymore miner, but i was having such issues, I moved to nicehash, does anyone else on here use nicehash with multiple gpus. It benchmarks all the algo's fine. When i go to start, it starts mining and then 20-30 min into mining the computer locks up. It doesn't turn off , or give any error message. It just locks , no mouse or keyboard. I have to then hard shut down the pc, and start mining over and it does it again. I don't know if it is certain algo's causing it or not, i tried most of them individually and it seems to do the same thing. I just want my rig mining already and i am having so many issues with the software configuration. any help is appreciated. Even if it is claymore code that will allow me to mine nicehash stratum links.

tumjuk

newbie

Activity: 13

Merit: 0

why my Mh/s drop so much.

my card is 1060 6gb.

https://prnt.sc/fq8c76

ETH is 21 Mh/s is normal.
LBC is 13 Mh/s is abnormal because i have 190 Mh/s per card if i run only LBC.

My code.
ethdcrminer64.exe -epool eth.suprnova.cc:5005 -ewal tumjuk.eth -epsw x -dpool stratum+tcp://lbry.suprnova.cc:6256 -dwal tumjuk.lbry -dpsw x -dcoin lbry -allpools 1

sorry for my english language.

regards,

fredeq

legendary

Activity: 1537

Merit: 1005

boysie is this professional vega or RX one?

fcaldas

newbie

Activity: 53

Merit: 0

Quote from: boysie on June 30, 2017, 04:05:56 PM

Not working with Vega :9 using 9.6

21:00:54:687   19c8   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
21:00:54:689   19c8   º Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.6 º
21:00:54:691   19c8   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ¼
21:00:54:694   19c8
21:00:54:897   19c8   ETH: 1 pool is specified
21:00:54:900   19c8   Main Ethereum pool is eu1-etc.ethermine.org:4444
21:00:54:903   19c8   DCR: 0 pool is specified
21:00:54:966   19c8   OpenCL platform: AMD Accelerated Parallel Processing
21:00:54:969   19c8   OpenCL initializing...

21:00:54:973   19c8   AMD Cards available: 1
21:00:54:976   19c8   GPU #0: gfx900, 16192 MB available, 64 compute units
21:00:54:979   19c8   POOL/SOLO version
21:00:54:981   19c8   b365
21:00:54:983   19c8   Platform: Windows
21:00:55:030   19c8   start building OpenCL program for GPU 0...
21:00:55:055   19c8   done
21:00:55:160   19c8   Error: AMD HSA Code Object loading failed.

oh wow, nice. make sure you let us know the hashrate when this is fixed Cheesy

boysie

newbie

Activity: 43

Merit: 0

Not working with Vega :9 using 9.6

21:00:54:687   19c8   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
21:00:54:689   19c8   º Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.6 º
21:00:54:691   19c8   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ¼
21:00:54:694   19c8
21:00:54:897   19c8   ETH: 1 pool is specified
21:00:54:900   19c8   Main Ethereum pool is eu1-etc.ethermine.org:4444
21:00:54:903   19c8   DCR: 0 pool is specified
21:00:54:966   19c8   OpenCL platform: AMD Accelerated Parallel Processing
21:00:54:969   19c8   OpenCL initializing...

21:00:54:973   19c8   AMD Cards available: 1
21:00:54:976   19c8   GPU #0: gfx900, 16192 MB available, 64 compute units
21:00:54:979   19c8   POOL/SOLO version
21:00:54:981   19c8   b365
21:00:54:983   19c8   Platform: Windows
21:00:55:030   19c8   start building OpenCL program for GPU 0...
21:00:55:055   19c8   done
21:00:55:160   19c8   Error: AMD HSA Code Object loading failed.

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 775. (Read 6590565 times)