Topic: Claymore&#039;s Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 812. (Read 6590718 times)

Quote from: adaseb on June 17, 2017, 07:29:12 PM

But the fee is only 1% for ETH-only mining mode... that's what is posted on the front page...

Yes ETH single mode is 1% dev fee. If you dual mine you will pay 2% dev fee on ETH side only. Dev fee never mines from the extra coin like dcr, sia, pasc but you pay for it in ETH mining time.

In that case it makes absolutely no sense to dual mine because the profit from the extra coins is far far less than another 1% of ETH gone.

Actually, you do make a little extra dual mining. The extra 1% fee is about one-third to one-half of the income from the second coin. But if you factor in the extra power consumption you might be right. Dual mining uses quite a bit more power. Also it stresses the cards more and might cause earlier GPU failure. I stopped dual mining for these reasons and it destroyed one of my power supplies. I added a GPU to my rig. The PSU should have been able to handle the extra power but the PSU turned off and would never turn off again. Currently it is in service and waiting for a new replacement. So you are probably correct in the fact that dual mining is probably not worth it when you consider all the factors involved.

thameur

newbie

Activity: 30

Merit: 0

Quote from: thameur on June 17, 2017, 07:21:36 PM

Quote from: sofianeelec on June 17, 2017, 03:51:49 PM

Effective Hashrate Drop Every New DAG in ETC and ETH 1-2% so becarful new Miners

Why

??
Hashrate Drop Every New DAG

For the 1 millionth time.

NO HASHRATE DOESN'T DROP EVERY NEW DAG. IT ONLY DROPS ON OLD GPUS LIKE 270X / 280X / 7970.

I have R9 390 8g asus strix, from 129.2 Mh/s drop to 128.01 Mh/s

adaseb

legendary

Activity: 3808

Merit: 1723

Quote from: thameur on June 17, 2017, 07:21:36 PM

Quote from: sofianeelec on June 17, 2017, 03:51:49 PM

Effective Hashrate Drop Every New DAG in ETC and ETH 1-2% so becarful new Miners

Why

??
Hashrate Drop Every New DAG

For the 1 millionth time.

NO HASHRATE DOESN'T DROP EVERY NEW DAG. IT ONLY DROPS ON OLD GPUS LIKE 270X / 280X / 7970.

thameur

newbie

Activity: 30

Merit: 0

Quote from: sofianeelec on June 17, 2017, 03:51:49 PM

Effective Hashrate Drop Every New DAG in ETC and ETH 1-2% so becarful new Miners

Why

??
Hashrate Drop Every New DAG

JustCauseBIH

member

Activity: 91

Merit: 10

Wow

I guess that most of those who speak about "new miners" are "old" only few months

I bet you would like that you are last person entered in minig, right?

If you think answer was posted few times, just point poster how to find answer if you dont want to serve it. Otherwise shut up.

BigWolf

newbie

Activity: 50

Merit: 0

Quote from: adaseb on June 17, 2017, 06:27:05 PM

Nothing but Newbies arguing with other Newbies in this thread.

Clear sign that it will be time to sell GPUs in the near near future.

If any of them had done much research before investing they would have realized they would have been smarter using that money investing in the coins on the exchanges. I make a hell of a lot more money playing the exchanges than I do mining. I'm just glad all my miners have paid for themselves and I'm in the black no matter what. Most of these newbies will never re-coupe the money they invested in hardware.

adaseb

legendary

Activity: 3808

Merit: 1723

Nothing but Newbies arguing with other Newbies in this thread.

Clear sign that it will be time to sell GPUs in the near near future.

sofianeelec

newbie

Activity: 22

Merit: 0

Quote from: sofianeelec on June 17, 2017, 04:12:00 PM

Quote from: sofianeelec on June 17, 2017, 03:51:49 PM

Effective Hashrate Drop Every New DAG in ETC and ETH 1-2% so becarful new Miners

can you explaine this please ??

is tha for the size of DAG increase and what solution can we do ??

any help

hacman

newbie

Activity: 6

Merit: 0

Quote from: hacman on June 14, 2017, 12:56:26 PM

Hi Claymore,

Firstly - thanks for your efforts on this. I’m new to mining, but got everything setup in no time at all!

So, I was wondering how you’re determining the number f TMUs/shaders that are available?

Is this detected in some way, or do you look at what each card identifies as and use hard coded values?

If the latter - is there any scope for adding a switch to allow manual config of these values?

Thanks!

Any thoughts on this?

I’m also curious to know - are there assembler drivers for the RX460 included in the program? As setting the -asm 1 flag seems to have no effect on these cards.

Thanks!

zanmat0

newbie

Activity: 21

Merit: 0

Quote from: Skol600ml on June 17, 2017, 05:35:44 PM

But the fee is only 1% for ETH-only mining mode... that's what is posted on the front page...

Yes ETH single mode is 1% dev fee. If you dual mine you will pay 2% dev fee on ETH side only. Dev fee never mines from the extra coin like dcr, sia, pasc but you pay for it in ETH mining time.

In that case it makes absolutely no sense to dual mine because the profit from the extra coins is far far less than another 1% of ETH gone.

How much do you think 1% is?

0.01 ETH of every 1 ETH mined

JustCauseBIH

member

Activity: 91

Merit: 10

Hi there,

i have small issue, but cant find ansswer in tons of replys and search did not help Sad

I have two GPU, but miner seams to read only one temperature (im sure it is diferent). I even used -gmap 10 -di 01 as GPU 1 was not shown at first.

Also, how can i point miner to use diferent profiles of afterbuner in config file? I found somewhere that, but lost track of right code.

Skol600ml

full member

Activity: 158

Merit: 100

Quote from: mcub3d on June 17, 2017, 05:19:25 PM

But the fee is only 1% for ETH-only mining mode... that's what is posted on the front page...

Yes ETH single mode is 1% dev fee. If you dual mine you will pay 2% dev fee on ETH side only. Dev fee never mines from the extra coin like dcr, sia, pasc but you pay for it in ETH mining time.

In that case it makes absolutely no sense to dual mine because the profit from the extra coins is far far less than another 1% of ETH gone.

How much do you think 1% is?

Klexicon

newbie

Activity: 11

Merit: 0

Hoping someone here can help. I'm looking to dual mine with Claymore (ETH and SIA). I would like to solo mine SIA via siamining (like I do with marlin miner) and ETH via nanopool but obviously do it together in one app like Claymore. Here's my current bat file config below. It's going through nanopool for both cryptos.

EthDcrMiner64.exe -ttli 75 -tstop 80 -epool eth-us-east1.nanopool.org:9999 -ewal etherwallet.minername/emailaddress -epsw x -dcoin sia -dwal siawallet/minername/emailaddress -dpsw x -ftime 10

Your help is much appreciated.

You need to set -dpool as well.

Marvell1

legendary

Activity: 2408

Merit: 1102

Leading Crypto Sports Betting & Casino Platform