Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 816.

Alubert

full member

Activity: 164

Merit: 100

Quote from: rampage999 on June 16, 2017, 07:25:57 AM

Claymore Dual Miner Windows version + Windows 10 + Dual Mining Sia From Miningpoolhub, Receipt For Miner Hang

The program will stuck ,console not updating, every one or two hour.

If I set automatically reboots via -r 1, it doesn't reboots automatically,
I have to press enter on the miner,
then it says SC the connection timed out and will go ahead to reboot.

The same thing happens on both of my windows 10 rigs.

Linux version, with miningpoolhub, never had such problem.

Is this known problem?
It is wired connection.

Is that overclocked?

rampage999

newbie

Activity: 45

Merit: 0

Claymore Dual Miner Windows version + Windows 10 + Dual Mining Sia From Miningpoolhub, Receipt For Miner Hang

The program will stuck ,console not updating, every one or two hour.

If I set automatically reboots via -r 1, it doesn't reboots automatically,
I have to press enter on the miner,
then it says SC the connection timed out and will go ahead to reboot.

The same thing happens on both of my windows 10 rigs.

Linux version, with miningpoolhub, never had such problem.

Is this known problem?
It is wired connection.

puffaz

newbie

Activity: 2

Merit: 0

Hi.

I was able to launch Genoil's miner on Windows 10 and GTX 970 with the latest drivers (382.53) by setting "Optimize for Compute Performance" to On for that app in Nvidia Control Panel as described here https://www.youtube.com/watch?v=NvD57PyEJz8

This gave me 20MH/s instead of ~3MH/s without the ned to downgrade the drivers. But this only works with Genoil's miner in OpenCL mode.

Guy in the video successfully runs Claymore's miner too.

For some reason for (not only) me with Claymore's miner and "Optimize for Compute Performance" enabled I get:

CUDA error 0 #102 - 46
CUDA error 0 #103 - 46
CUDA error 0 #105 - 46
...
CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
...
GPU 0, CUDA error 46 - cannot write buffer for DAG
...

Here's the description of what "Optimize for Compute Performance" does
http://nvidia.custhelp.com/app/answers/detail/a_id/4370/~/what-does-the-setting-optimize-for-compute-performance-do%3F

What could be the reason?

liomojo1

hero member

Activity: 676

Merit: 500

Thanks for the tip!
I will stop all other cards and leave only this one to see , but the pool is so slow in statistics!

aarons6

legendary

Activity: 1736

Merit: 1006

Quote from: liomojo1 on June 16, 2017, 05:01:12 AM

Quote from: Claymore on June 16, 2017, 04:46:40 AM

Quote from: liomojo1 on June 16, 2017, 04:34:15 AM

Claymore how is this explained , this 48.5 mgh is one rx480 which was hashing before with 28.5 mgh , now it is 48.5 , obviously it is not real , but it is hashing for hour with no errors and even after restart of the miner it is the same , even dual mining? Could it be this samsung ddr that when clocked lies the miner that it hashes fast , but in reality it is not , that is why effective hashrate is lower 30% ! I see on all my machines with samsung ddr that has this low effective hashrate! The micron ones and the r9 390 machines don`t have this low effective hashrate!

Of course this is not real hashrate for RX480. Probably you modified bios/clocks too much and now that card is crazy.

Actually it is the same bios and same setting for over a month , may be a windows update made it crazy like this! Just wondering why there no errors and even hwinfo don`t detect gpu errors! Very strange?

one thing you may want to edit out your TV number as someone can possible use that to try to log into your pc.. altho they would have to guess the random password..

another thing, aside what the software says, what does the pool say your hash rate is? its probably just reporting wrong and mining the same speed as the other cards.

liomojo1

hero member

Activity: 676

Merit: 500

Quote from: Claymore on June 16, 2017, 04:46:40 AM

Quote from: liomojo1 on June 16, 2017, 04:34:15 AM

Claymore how is this explained , this 48.5 mgh is one rx480 which was hashing before with 28.5 mgh , now it is 48.5 , obviously it is not real , but it is hashing for hour with no errors and even after restart of the miner it is the same , even dual mining? Could it be this samsung ddr that when clocked lies the miner that it hashes fast , but in reality it is not , that is why effective hashrate is lower 30% ! I see on all my machines with samsung ddr that has this low effective hashrate! The micron ones and the r9 390 machines don`t have this low effective hashrate!

Of course this is not real hashrate for RX480. Probably you modified bios/clocks too much and now that card is crazy.

Actually it is the same bios and same setting for over a month , may be a windows update made it crazy like this! Just wondering why there no errors and even hwinfo don`t detect gpu errors! Very strange?

nlrobbie

member

Activity: 105

Merit: 10

When i try to download the claymore software i got a warning that the file has a virus.

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: liomojo1 on June 16, 2017, 04:34:15 AM

Claymore how is this explained , this 48.5 mgh is one rx480 which was hashing before with 28.5 mgh , now it is 48.5 , obviously it is not real , but it is hashing for hour with no errors and even after restart of the miner it is the same , even dual mining? Could it be this samsung ddr that when clocked lies the miner that it hashes fast , but in reality it is not , that is why effective hashrate is lower 30% ! I see on all my machines with samsung ddr that has this low effective hashrate! The micron ones and the r9 390 machines don`t have this low effective hashrate!

Of course this is not real hashrate for RX480. Probably you modified bios/clocks too much and now that card is crazy.

coinville07

newbie

Activity: 5

Merit: 0

Quote from: liomojo1 on June 16, 2017, 04:34:15 AM

Claymore how is this explained , this 48.5 mgh is one rx480 which was hashing before with 28.5 mgh , now it is 48.5 , obviously it is not real , but it is hashing for hour with no errors and even after restart of the miner it is the same , even dual mining? Could it be this samsung ddr that when clocked lies the miner that it hashes fast , but in reality it is not , that is why effective hashrate is lower 30% ! I see on all my machines with samsung ddr that has this low effective hashrate! The micron ones and the r9 390 machines don`t have this low effective hashrate!
https://s1.postimg.org/x9o2kf51b/48mgh.png

Meaby our card's exact hashrate is that and claymore is earning much more we think Grin

liomojo1

hero member

Activity: 676

Merit: 500

Claymore how is this explained , this 48.5 mgh is one rx480 which was hashing before with 28.5 mgh , now it is 48.5 , obviously it is not real , but it is hashing for hour with no errors and even after restart of the miner it is the same , even dual mining? Could it be this samsung ddr that when clocked lies the miner that it hashes fast , but in reality it is not , that is why effective hashrate is lower 30% ! I see on all my machines with samsung ddr that has this low effective hashrate! The micron ones and the r9 390 machines don`t have this low effective hashrate!

ziddey

newbie

Activity: 16

Merit: 0

Quote from: dt8666 on June 15, 2017, 08:27:26 PM

About the Crimmson Driver for AMD.

From the main page and on every run of Claymore, it keep shows the need to use 15.12 driver.

If I have the Rx4xx/5xx card, will I see degraded performance if using driver like 17.4.3? or any 17.xx onward? or will this newer driver caused more stability with Claymore?

It's just what's been tested to be a known good for the most part. I've seen no performance penalty with the current drivers.

coinville07

newbie

Activity: 5

Merit: 0

Quote from: BigWolf on June 15, 2017, 11:43:25 PM

Quote from: TechPark on June 15, 2017, 06:47:25 PM

Hi, Claymore

Could you please modify your miner in the way so it forces a user to pass series of tests even before a download to filter out uneducated, arrogant, lazy and greedy people out

LMFAO!!! The influx of newbies is crazy the last few weeks. Someone should write a script to count how many times the same exact question can be asked over and over!

Newbies: BEFORE you even think about posting a question, go back and read at least the last 10 pages of this forum. Chances are your question has been asked and answered several damn times. Then if you don't see it, read the "Readme!!!.txt" file that Claymore so graciously spent his time on for you. It's filled with what will most likely answer your question. (Plus you might even learn how to optimize your miner as well.) After all of that if you still can't figure it out, then by all means please ask. But if you can't do the two things prior to asking, don't expect to be spoon fed from the people you are competing against.

Is it really much that difficult to understand what NEWBIE is. At the same time you also write it with your own fingers.? Whats your aim? Here have about 600 pages how can i know the thing i am looking is indexed on first 10 pages and labeled same as what my situation is? Are the forum concepts changed or its just i m outdated from earth. Is this your job here stressing people and flouting with them are you getting paid for this because if yes give your eth adress to me so i can donate you You man if you don't want to help put your hands in your pocket rather than putting on that keyboard ok? Regards.
Note i have already read whole readme.txt and for possible solutions even all commands. I also solve my issue by my own as you saw i'm not a spoonfed as you think right? This was a different issue and i think some one has to apologise for his impulsive behavior.

coinville07

newbie

Activity: 5

Merit: 0

Quote from: aarons6 on June 16, 2017, 03:09:06 AM

Quote from: coinville07 on June 16, 2017, 01:39:31 AM

Quote from: aarons6 on June 15, 2017, 09:19:51 PM

Quote from: coinville07 on June 15, 2017, 09:05:00 PM

Quote from: kirune on June 15, 2017, 06:18:01 PM

Hi all. the last couple f days I've seen the overall Mh/s amount diminishing (mining ETH at nanopool). I moved from an average of 192.4Mh/s to 190.7Mh/s. (x7 rx570)
The only significant issue was that Windows Defender (windows 10) all of a sudden decided that EthDcrMiner64.exe was a severe thread and put it on quarantine. I fixed that setting the file and the process on the exclusion list. I may be wrong, but I'm pretty sure that the decrease on speed was before the incident.
I don't know if the incident is related to the lose of speed, or some other external factor is affecting production, and I'd appreciate any input on the problem.

EDIT: I forgot to mention, but the average weather temp has increased to +30 Cº increasing GPUs temp +2 degrees approx. (the max values being 71, 71, 69, 59, 67, 65, 68)

Same issue on my miners for last two days total miner speed on ethermine org is a bit low than before and share qty is very low too claymore miner also doesn't say "SHARE ACCEPTED (...ms)" it only says "SHARE FOUND (GPU...) Some one have or solved an issue like this. I have stopped the miners today can it be an attack or anything like that some of my friends are also having this issue with their miners too Thanks®ards

yes im not sure but my speed is going down as well.. maybe its the site? before the orange and green line were on top of each other.

https://ethermine.org/miners/06f176D67B18d097CF061117442d78B87CCEe8E0

hmm look at this a huge loss on usa1
https://ethermine.org/stats

it must be an internet outage?

i think im going to put eu1 as a backup in the epools.txt

Hi to all i opened a ticked last night and this is the mail from support team:

We are aware of the server problems with claymore miners. Our backend support is currently looking into fixing this. Switching stratum may work temporarily but it’s as though workers are being banned.

Another work around is to place the ’ -allcoins ‘ command into your start.bat to have the dev fee mine on a different pool to avoid being blocked.

We apologize for this inconvenience and are working to fix this. We appreciate your patience.

hmm i have allpools but not allcoins.. i will test.

I now tried the eu server on one of my rig and it started to give shares accepted then ethermine tweeted us1 server perfomance issue is resolved you can check if helps.

aarons6

legendary

Activity: 1736

Merit: 1006

Quote from: coinville07 on June 16, 2017, 01:39:31 AM

Quote from: aarons6 on June 15, 2017, 09:19:51 PM

Quote from: coinville07 on June 15, 2017, 09:05:00 PM

Quote from: kirune on June 15, 2017, 06:18:01 PM

Hi all. the last couple f days I've seen the overall Mh/s amount diminishing (mining ETH at nanopool). I moved from an average of 192.4Mh/s to 190.7Mh/s. (x7 rx570)
The only significant issue was that Windows Defender (windows 10) all of a sudden decided that EthDcrMiner64.exe was a severe thread and put it on quarantine. I fixed that setting the file and the process on the exclusion list. I may be wrong, but I'm pretty sure that the decrease on speed was before the incident.
I don't know if the incident is related to the lose of speed, or some other external factor is affecting production, and I'd appreciate any input on the problem.

EDIT: I forgot to mention, but the average weather temp has increased to +30 Cº increasing GPUs temp +2 degrees approx. (the max values being 71, 71, 69, 59, 67, 65, 68)

Same issue on my miners for last two days total miner speed on ethermine org is a bit low than before and share qty is very low too claymore miner also doesn't say "SHARE ACCEPTED (...ms)" it only says "SHARE FOUND (GPU...) Some one have or solved an issue like this. I have stopped the miners today can it be an attack or anything like that some of my friends are also having this issue with their miners too Thanks®ards

yes im not sure but my speed is going down as well.. maybe its the site? before the orange and green line were on top of each other.

https://ethermine.org/miners/06f176D67B18d097CF061117442d78B87CCEe8E0

hmm look at this a huge loss on usa1
https://ethermine.org/stats

it must be an internet outage?

i think im going to put eu1 as a backup in the epools.txt

Hi to all i opened a ticked last night and this is the mail from support team:

We are aware of the server problems with claymore miners. Our backend support is currently looking into fixing this. Switching stratum may work temporarily but it’s as though workers are being banned.

Another work around is to place the ’ -allcoins ‘ command into your start.bat to have the dev fee mine on a different pool to avoid being blocked.

We apologize for this inconvenience and are working to fix this. We appreciate your patience.

hmm i have allpools but not allcoins.. i will test.

coinville07

newbie

Activity: 5

Merit: 0

Quote from: aarons6 on June 15, 2017, 09:19:51 PM

Quote from: coinville07 on June 15, 2017, 09:05:00 PM

Quote from: kirune on June 15, 2017, 06:18:01 PM

Hi all. the last couple f days I've seen the overall Mh/s amount diminishing (mining ETH at nanopool). I moved from an average of 192.4Mh/s to 190.7Mh/s. (x7 rx570)
The only significant issue was that Windows Defender (windows 10) all of a sudden decided that EthDcrMiner64.exe was a severe thread and put it on quarantine. I fixed that setting the file and the process on the exclusion list. I may be wrong, but I'm pretty sure that the decrease on speed was before the incident.
I don't know if the incident is related to the lose of speed, or some other external factor is affecting production, and I'd appreciate any input on the problem.

EDIT: I forgot to mention, but the average weather temp has increased to +30 Cº increasing GPUs temp +2 degrees approx. (the max values being 71, 71, 69, 59, 67, 65, 68)

Same issue on my miners for last two days total miner speed on ethermine org is a bit low than before and share qty is very low too claymore miner also doesn't say "SHARE ACCEPTED (...ms)" it only says "SHARE FOUND (GPU...) Some one have or solved an issue like this. I have stopped the miners today can it be an attack or anything like that some of my friends are also having this issue with their miners too Thanks®ards

yes im not sure but my speed is going down as well.. maybe its the site? before the orange and green line were on top of each other.

https://ethermine.org/miners/06f176D67B18d097CF061117442d78B87CCEe8E0

hmm look at this a huge loss on usa1
https://ethermine.org/stats

it must be an internet outage?

i think im going to put eu1 as a backup in the epools.txt

Hi to all i opened a ticked last night and this is the mail from support team:

We are aware of the server problems with claymore miners. Our backend support is currently looking into fixing this. Switching stratum may work temporarily but it’s as though workers are being banned.

Another work around is to place the ’ -allcoins ‘ command into your start.bat to have the dev fee mine on a different pool to avoid being blocked.

We apologize for this inconvenience and are working to fix this. We appreciate your patience.

delle54

sr. member

Activity: 307

Merit: 250

Quote from: BigWolf

Newbies: BEFORE you even think about posting a question, go back and read at least the last 10 pages of this forum. Chances are your question has been asked and answered several damn times. Then if you don't see it, read the "Readme!!!.txt" file that Claymore so graciously spent his time on for you. It's filled with what will most likely answer your question. (Plus you might even learn how to optimize your miner as well.) After all of that if you still can't figure it out, then by all means please ask. But if you can't do the two things prior to asking, don't expect to be spoon fed from the people you are competing against.

Also, don't forget the search function at the top of the page or just google...

BigWolf

newbie

Activity: 50

Merit: 0

Quote from: TechPark on June 15, 2017, 06:47:25 PM

Hi, Claymore

Could you please modify your miner in the way so it forces a user to pass series of tests even before a download to filter out uneducated, arrogant, lazy and greedy people out

LMFAO!!! The influx of newbies is crazy the last few weeks. Someone should write a script to count how many times the same exact question can be asked over and over!

Newbies: BEFORE you even think about posting a question, go back and read at least the last 10 pages of this forum. Chances are your question has been asked and answered several damn times. Then if you don't see it, read the "Readme!!!.txt" file that Claymore so graciously spent his time on for you. It's filled with what will most likely answer your question. (Plus you might even learn how to optimize your miner as well.) After all of that if you still can't figure it out, then by all means please ask. But if you can't do the two things prior to asking, don't expect to be spoon fed from the people you are competing against.

aarons6

legendary

Activity: 1736

Merit: 1006

Quote from: coinville07 on June 15, 2017, 09:05:00 PM

Quote from: kirune on June 15, 2017, 06:18:01 PM

Hi all. the last couple f days I've seen the overall Mh/s amount diminishing (mining ETH at nanopool). I moved from an average of 192.4Mh/s to 190.7Mh/s. (x7 rx570)
The only significant issue was that Windows Defender (windows 10) all of a sudden decided that EthDcrMiner64.exe was a severe thread and put it on quarantine. I fixed that setting the file and the process on the exclusion list. I may be wrong, but I'm pretty sure that the decrease on speed was before the incident.
I don't know if the incident is related to the lose of speed, or some other external factor is affecting production, and I'd appreciate any input on the problem.

EDIT: I forgot to mention, but the average weather temp has increased to +30 Cº increasing GPUs temp +2 degrees approx. (the max values being 71, 71, 69, 59, 67, 65, 68)

Same issue on my miners for last two days total miner speed on ethermine org is a bit low than before and share qty is very low too claymore miner also doesn't say "SHARE ACCEPTED (...ms)" it only says "SHARE FOUND (GPU...) Some one have or solved an issue like this. I have stopped the miners today can it be an attack or anything like that some of my friends are also having this issue with their miners too Thanks®ards

yes im not sure but my speed is going down as well.. maybe its the site? before the orange and green line were on top of each other.

https://ethermine.org/miners/06f176D67B18d097CF061117442d78B87CCEe8E0

hmm look at this a huge loss on usa1
https://ethermine.org/stats

it must be an internet outage?

i think im going to put eu1 as a backup in the epools.txt

coinville07

newbie

Activity: 5

Merit: 0

Quote from: kirune on June 15, 2017, 06:18:01 PM

Hi all. the last couple f days I've seen the overall Mh/s amount diminishing (mining ETH at nanopool). I moved from an average of 192.4Mh/s to 190.7Mh/s. (x7 rx570)
The only significant issue was that Windows Defender (windows 10) all of a sudden decided that EthDcrMiner64.exe was a severe thread and put it on quarantine. I fixed that setting the file and the process on the exclusion list. I may be wrong, but I'm pretty sure that the decrease on speed was before the incident.
I don't know if the incident is related to the lose of speed, or some other external factor is affecting production, and I'd appreciate any input on the problem.

EDIT: I forgot to mention, but the average weather temp has increased to +30 Cº increasing GPUs temp +2 degrees approx. (the max values being 71, 71, 69, 59, 67, 65, 68)

Same issue on my miners for last two days total miner speed on ethermine org is a bit low than before and share qty is very low too claymore miner also doesn't say "SHARE ACCEPTED (...ms)" it only says "SHARE FOUND (GPU...) Some one have or solved an issue like this. I have stopped the miners today can it be an attack or anything like that some of my friends are also having this issue with their miners too Thanks®ards

dt8666

full member

Activity: 302

Merit: 102

Mining with noise and without noise is all possibl

About the Crimmson Driver for AMD.

From the main page and on every run of Claymore, it keep shows the need to use 15.12 driver.

If I have the Rx4xx/5xx card, will I see degraded performance if using driver like 17.4.3? or any 17.xx onward? or will this newer driver caused more stability with Claymore?

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 816. (Read 6590718 times)