Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 826.

Metroid

sr. member

Activity: 2142

Merit: 353

Xtreme Monster

Quote from: Claymore on June 12, 2017, 04:40:46 PM

Quote from: GH on June 12, 2017, 03:49:54 PM

Claymore,
the problem with ETHMan 3.1 + Dualminer 9.5
If some rig go down, and then after some time goes up, it dosent restore in ETHMan, on screenshot you see that miner restarted and work, i launched web console and it works already 2 minutes, but ETHMan still show "lost ****". Even after 10 minutes ETHMan dosent see rig. So as it was with ETHMan 3.0, I need restart it to see all rigs stats again.

If you included cryptography and https, then maybe here some trouble with ssl? need to update certificate if connection was lost?

Can confirm this, same problem here.
The last update of EthMan improved the 100% lock after a warning, but a rig which was offline and comes back up is not (always?) shown as alive until EthMan is restarted.
Also the batch action is still not retriggered in case of a persisting failure.

I spent half a day in attempts to reproduce it, but it works fine for me, weird. If you can 100% reproduce this issue I can prepare debug version with logging and send it to you so I can get more info. PM me if you want to participate.
Retriggering: if a rig was lost, BAT file will be executed. If rig is back again and then again will be lost, BAT will be executed again. What's wrong exactly?

A friend was having this issue, so i went to check and it looks like ethman newest version see the miners and after a while one or more miners just disappear even though the ones that disappeared are still working, tested older version and ethman v2.6 works as it should be.

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: GH on June 12, 2017, 03:49:54 PM

Claymore,
the problem with ETHMan 3.1 + Dualminer 9.5
If some rig go down, and then after some time goes up, it dosent restore in ETHMan, on screenshot you see that miner restarted and work, i launched web console and it works already 2 minutes, but ETHMan still show "lost ****". Even after 10 minutes ETHMan dosent see rig. So as it was with ETHMan 3.0, I need restart it to see all rigs stats again.

If you included cryptography and https, then maybe here some trouble with ssl? need to update certificate if connection was lost?

Can confirm this, same problem here.
The last update of EthMan improved the 100% lock after a warning, but a rig which was offline and comes back up is not (always?) shown as alive until EthMan is restarted.
Also the batch action is still not retriggered in case of a persisting failure.

I spent half a day in attempts to reproduce it, but it works fine for me, weird. If you can 100% reproduce this issue I can prepare debug version with logging and send it to you so I can get more info. PM me if you want to participate.
Retriggering: if a rig was lost, BAT file will be executed. If rig is back again and then again will be lost, BAT will be executed again. What's wrong exactly?

bobjones34

newbie

Activity: 10

Merit: 0

Quote from: bobjones34 on June 12, 2017, 10:09:50 AM

Hi, ive looked eveywhere and cant find an answer.
Could someone please tell me what ssssssssssssssssssssssssssssssssssss
mean when i look at the miner ?
Cheers

Anyone Please ?

Wblead

newbie

Activity: 1

Merit: 0

have question to Gigabyte GTX 970 WindForce 3X OC owners. I've been trying to max out GPU performance in ethereum mining.
I am using Win10 x64 with 350.12 drivers.
Card is overclocked to 1500/3800 GPU/MEM an gives reasonable 18.6 MH/s.
I also played with NVIDIA SMI and both 347.52 and 347.88 drivers. Win7 has similar statistics.
However it's a little bit off to me that MSI or ASUS GTX970 owners can obtain up to 23 MH/s with similar clock speeds.

Can it be higher?

GH

member

Activity: 117

Merit: 10

Quote from: davescream on June 12, 2017, 04:19:32 AM

Claymore,
the problem with ETHMan 3.1 + Dualminer 9.5
If some rig go down, and then after some time goes up, it dosent restore in ETHMan, on screenshot you see that miner restarted and work, i launched web console and it works already 2 minutes, but ETHMan still show "lost ****". Even after 10 minutes ETHMan dosent see rig. So as it was with ETHMan 3.0, I need restart it to see all rigs stats again.

If you included cryptography and https, then maybe here some trouble with ssl? need to update certificate if connection was lost?

Can confirm this, same problem here.
The last update of EthMan improved the 100% lock after a warning, but a rig which was offline and comes back up is not (always?) shown as alive until EthMan is restarted.
Also the batch action is still not retriggered in case of a persisting failure.

bonosurgut

hero member

Activity: 520

Merit: 500

Quote from: ne0x86 on June 12, 2017, 02:38:31 PM

Hi, simple question. Can I run claymore dual mining on a PC with an AMD Card and a nvidia card running together?

I guess but not sure

Thanks!

yes, you can, add -mport and -di various for each running miner

sofianeelec

newbie

Activity: 22

Merit: 0

reported Hashrate decreased evrey New DAG whay ??

Apolo.-

newbie

Activity: 14

Merit: 0

Quote from: ?? on ??

Quote from: Apolo.- on June 12, 2017, 01:57:05 PM

Quote from: notbatman on June 12, 2017, 10:54:31 AM

^ mining the wrong coin, try one with a smaller DAG.

Can you please explain me a little more? i read about DAG but don´t understand the concept.

My card has 3gb Vram, is that the problem?

Your card's memory controller is actually the problem - as the DAG grows, even though it can fit it in its RAM, it gets slower and slower at random access. This does not occur with GCN 2 and newer GPUs.

So theres no solution for this?

i will buy rx570 cards, will 4gb be enought or should i buy the one with 8gb ?

ne0x86

newbie

Activity: 81

Merit: 0

Hi, simple question. Can I run claymore dual mining on a PC with an AMD Card and a nvidia card running together?

I guess but not sure

Thanks!

Apolo.-

newbie

Activity: 14

Merit: 0

Quote from: notbatman on June 12, 2017, 10:54:31 AM

^ mining the wrong coin, try one with a smaller DAG.

Can you please explain me a little more? i read about DAG but don´t understand the concept.

My card has 3gb Vram, is that the problem?

h!ghC

newbie

Activity: 10

Merit: 0

Quote from: xleejohnx on June 12, 2017, 09:51:31 AM

Quote from: h!ghC on June 12, 2017, 07:54:19 AM

Hello,

I have some trouble using this miner. It seems to connect to the mining pool (suprnova.cc) but it doesn't mine. There are no "Share accepted" notices:

http://www.imagebanana.com/view/5x1258l7/Unbenannt.PNG

This is my config:

Code:

-epool stratum+tcp://eth.suprnova.cc:5000
-ewal username.eth1
-epsw xyz
-esm 3
-dpool stratum+tcp://dcr.suprnova.cc:3252
-dwal username.dcr1
-dpsw xyz
-mode 1
-allpools 1

Any idea why it doesn't work?

Best

edit: just noticed you have esm 3 for nicehash try 1
also mode 1 is eth only and you have settings for mode 0

Thanks for the answer. Mode 1 is on purpose, i don't care too much about DCR and i am happy if ETH works.
I have the "- esm 3" info from suprnova.cc website (https://eth.suprnova.cc/). But I changed it to 1 and than I receive this error message:
http://www.imagebanana.com/view/d6k63h1f/1.PNG
Any other suggestions?

Kokum

newbie

Activity: 7

Merit: 0

Hi,

I have a question which is important to me. Why Claymore's Miner does not stop hashing when the network is down? I did a simple test - unplugged Internet plug from my router so there was no Internet connectivity on local network but the miner was still showing the same hash rate and even finding new shares. How is this possible? Worse thing it is also drawing the same amount of electricity when no Internet connection. If my ISP will have some network outages then Claymore's Miner will simply waste the electricity. Is this by default or some config error or something else?

Thanks.

jointheredditarmy

newbie

Activity: 7

Merit: 0

Quote from: xleejohnx on June 12, 2017, 10:40:15 AM

Quote from: jointheredditarmy on June 12, 2017, 10:02:10 AM

Quote from: xleejohnx on June 12, 2017, 09:59:23 AM

Quote from: jointheredditarmy on June 12, 2017, 09:53:51 AM

Is this the right place to ask for technical help? Sorry, new to the forums!

I'm getting the following error repeated when trying to dual mine ETH/SC

15:32:39:297   2824   ETH: Stratum - Connected (eth-eu1.nanopool.org:9999)
15:32:39:359   2824   Socket was closed remotely (by pool)
15:32:39:361   2824   ETH: Job timeout, disconnect, retry in 20 sec...

Doesn't look like any other errors, can provide rest of logs if helpful.

configs below (stripped email and wallet). Please help!

-epool eth-eu1.nanopool.org:9999
-epsw x
-dpool stratum+tcp://sia-eu1.nanopool.org:7777
-dpsw x
-esm 1
-eres 1
-dcoin sc
-tt 75
-tstop 85

you are missing these command lines
-ewal YOUR_ETH_ADDRESS/YOUR_WORKER_NAME/YOUR_EMAIL
-dwal YOUR_ETH_ADDRESS/YOUR_WORKER_NAME/YOUR_EMAIL

I deleted it when copying and pasting the configs from config.txt, but its there.

-ewal 0x7da5428e36A057A2f6C1BB0f96B1D04eD245a6a9/test_machine

You need at add your email at the end

Ack, good call! Fixed but unfortunately still not working with the same error Sad

notbatman

legendary

Activity: 2212

Merit: 1038

^ mining the wrong coin, try one with a smaller DAG.

Apolo.-

newbie

Activity: 14

Merit: 0

Hello, i´m starting to mine eth, i have this config with a 7970 gpu

setx GPU_FORCE_64BIT_PTR 0

setx GPU_MAX_HEAP_SIZE 100

setx GPU_USE_SYNC_OBJECTS 1

setx GPU_MAX_ALLOC_PERCENT 100

setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal 0xdab6c630978e0f7059c07a7a8f3b2627359cd346.compunoe -epsw x

I´m having 11.7 mhs only, what am i doing wrong?

I uninstalled last drivers and installed 15.12

Gpu is without overclock

xleejohnx

hero member

Activity: 672

Merit: 500

Quote from: jointheredditarmy on June 12, 2017, 10:02:10 AM

Quote from: xleejohnx on June 12, 2017, 09:59:23 AM

Quote from: jointheredditarmy on June 12, 2017, 09:53:51 AM

Is this the right place to ask for technical help? Sorry, new to the forums!

I'm getting the following error repeated when trying to dual mine ETH/SC

15:32:39:297   2824   ETH: Stratum - Connected (eth-eu1.nanopool.org:9999)
15:32:39:359   2824   Socket was closed remotely (by pool)
15:32:39:361   2824   ETH: Job timeout, disconnect, retry in 20 sec...

Doesn't look like any other errors, can provide rest of logs if helpful.

configs below (stripped email and wallet). Please help!

-epool eth-eu1.nanopool.org:9999
-epsw x
-dpool stratum+tcp://sia-eu1.nanopool.org:7777
-dpsw x
-esm 1
-eres 1
-dcoin sc
-tt 75
-tstop 85

you are missing these command lines
-ewal YOUR_ETH_ADDRESS/YOUR_WORKER_NAME/YOUR_EMAIL
-dwal YOUR_ETH_ADDRESS/YOUR_WORKER_NAME/YOUR_EMAIL

I deleted it when copying and pasting the configs from config.txt, but its there.

-ewal 0x7da5428e36A057A2f6C1BB0f96B1D04eD245a6a9/test_machine

You need at add your email at the end

myty

newbie

Activity: 3

Merit: 0

Quote from: myty on June 12, 2017, 01:43:51 AM

Hello.
I am using R9 380 Nitro Sapphire.
When i am mining solo Ethereum all is working fine, but when i dual mine with DECRED I get GPU artefacts.
Why is that?
Thank you!

anyone?

AriesIV10

legendary

Activity: 1260

Merit: 1006

Mine for a Bit

Quote from: Simon_Grape on June 11, 2017, 10:56:07 AM

For all of you struggling to keep your rigs cool this time of year.. This dude has a cool idea

https://www.youtube.com/watch?v=E-_9F8R_PFU

I love ingenuity!!

bobjones34

newbie

Activity: 10

Merit: 0

Hi, ive looked eveywhere and cant find an answer.
Could someone please tell me what ssssssssssssssssssssssssssssssssssss
mean when i look at the miner ?
Cheers

jointheredditarmy

newbie

Activity: 7

Merit: 0

Quote from: xleejohnx on June 12, 2017, 09:59:23 AM

Quote from: jointheredditarmy on June 12, 2017, 09:53:51 AM

Is this the right place to ask for technical help? Sorry, new to the forums!

I'm getting the following error repeated when trying to dual mine ETH/SC

15:32:39:297   2824   ETH: Stratum - Connected (eth-eu1.nanopool.org:9999)
15:32:39:359   2824   Socket was closed remotely (by pool)
15:32:39:361   2824   ETH: Job timeout, disconnect, retry in 20 sec...

Doesn't look like any other errors, can provide rest of logs if helpful.

configs below (stripped email and wallet). Please help!

-epool eth-eu1.nanopool.org:9999
-epsw x
-dpool stratum+tcp://sia-eu1.nanopool.org:7777
-dpsw x
-esm 1
-eres 1
-dcoin sc
-tt 75
-tstop 85

you are missing these command lines
-ewal YOUR_ETH_ADDRESS/YOUR_WORKER_NAME/YOUR_EMAIL
-dwal YOUR_ETH_ADDRESS/YOUR_WORKER_NAME/YOUR_EMAIL

I deleted it when copying and pasting the configs from config.txt, but its there.

-ewal 0x7da5428e36A057A2f6C1BB0f96B1D04eD245a6a9/test_machine

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 826. (Read 6590718 times)