Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 827.

xleejohnx

hero member

Activity: 672

Merit: 500

Quote from: jointheredditarmy on June 12, 2017, 09:53:51 AM

Is this the right place to ask for technical help? Sorry, new to the forums!

I'm getting the following error repeated when trying to dual mine ETH/SC

15:32:39:297   2824   ETH: Stratum - Connected (eth-eu1.nanopool.org:9999)
15:32:39:359   2824   Socket was closed remotely (by pool)
15:32:39:361   2824   ETH: Job timeout, disconnect, retry in 20 sec...

Doesn't look like any other errors, can provide rest of logs if helpful.

configs below (stripped email and wallet). Please help!

-epool eth-eu1.nanopool.org:9999
-epsw x
-dpool stratum+tcp://sia-eu1.nanopool.org:7777
-dpsw x
-esm 1
-eres 1
-dcoin sc
-tt 75
-tstop 85

you are missing these command lines
-ewal YOUR_ETH_ADDRESS/YOUR_WORKER_NAME/YOUR_EMAIL
-dwal YOUR_SIA_ADDRESS/YOUR_WORKER_NAME/YOUR_EMAIL

EDIT: bad habit of copy and paste

jointheredditarmy

newbie

Activity: 7

Merit: 0

Is this the right place to ask for technical help? Sorry, new to the forums!

I'm getting the following error repeated when trying to dual mine ETH/SC

15:32:39:297   2824   ETH: Stratum - Connected (eth-eu1.nanopool.org:9999)
15:32:39:359   2824   Socket was closed remotely (by pool)
15:32:39:361   2824   ETH: Job timeout, disconnect, retry in 20 sec...

Doesn't look like any other errors, can provide rest of logs if helpful.

configs below (stripped email and wallet). Please help!

-epool eth-eu1.nanopool.org:9999
-epsw x
-dpool stratum+tcp://sia-eu1.nanopool.org:7777
-dpsw x
-esm 1
-eres 1
-dcoin sc
-tt 75
-tstop 85

xleejohnx

hero member

Activity: 672

Merit: 500

Quote from: h!ghC on June 12, 2017, 07:54:19 AM

Hello,

I have some trouble using this miner. It seems to connect to the mining pool (suprnova.cc) but it doesn't mine. There are no "Share accepted" notices:

This is my config:

Code:

-epool stratum+tcp://eth.suprnova.cc:5000
-ewal username.eth1
-epsw xyz
-esm 3
-dpool stratum+tcp://dcr.suprnova.cc:3252
-dwal username.dcr1
-dpsw xyz
-mode 1
-allpools 1

Any idea why it doesn't work?

Best

edit: just noticed you have esm 3 for nicehash try 1
also mode 1 is eth only and you have settings for mode 0

oakleerulez

newbie

Activity: 4

Merit: 0

Quote from: NoOneLt on June 12, 2017, 08:59:14 AM

Quote from: oakleerulez on June 12, 2017, 08:35:48 AM

Hi All,
Was hoping for some help/suggestions. I am trying to use claymore 9.5 to mine with 5 Zotac 1070 minis. When I run the miner it only comes in at 2.5mh/s per card. I dont think its a power issue since it will mine a variety of other algorithms. Currently using stock settings in windows10.

Any suggestions would be awesome.

Do you have latest build of windows? Also what driver version you are using? i'am on 382.33 and getting around 21mh/s from 1060/6GB.

Anyone tried latest 382.53 - issues? Improvements?

driver build 382.33
windows build 10586.916

antiycda

full member

Activity: 140

Merit: 100

Finally i got my 5 X 1060 3G rig up&running. 105Mhs / 600 Watt. thanks guys

HappyS

legendary

Activity: 1568

Merit: 1008

Hi there, can somebody help me with one question:

Can i install this miner like a "service" on my work PC's (windows) ? I have a lot of 1060-1080 card on work ant want use it for mining but cant "autorun" script...

NoOneLt

member

Activity: 140

Merit: 10

Quote from: oakleerulez on June 12, 2017, 08:35:48 AM

Hi All,
Was hoping for some help/suggestions. I am trying to use claymore 9.5 to mine with 5 Zotac 1070 minis. When I run the miner it only comes in at 2.5mh/s per card. I dont think its a power issue since it will mine a variety of other algorithms. Currently using stock settings in windows10.

Any suggestions would be awesome.

Do you have latest build of windows? Also what driver version you are using? i'am on 382.33 and getting around 21mh/s from 1060/6GB.

Anyone tried latest 382.53 - issues? Improvements?

bensam1231

legendary

Activity: 1750

Merit: 1024

@Claymore when is Nvidia getting ASM enhancements? Is that just going to be AMD only or will they come to Nvidia six months down the line like most major changes to the miner?

salmonmeat

newbie

Activity: 4

Merit: 0

Is it still impossible to mine with cards with less than 2 GB video memory? looks like latest version of claymore miner no longer uses DAG files...

oakleerulez

newbie

Activity: 4

Merit: 0

Hi All,
Was hoping for some help/suggestions. I am trying to use claymore 9.5 to mine with 5 Zotac 1070 minis. When I run the miner it only comes in at 2.5mh/s per card. I dont think its a power issue since it will mine a variety of other algorithms. Currently using stock settings in windows10.

Any suggestions would be awesome.

cprieto

newbie

Activity: 10

Merit: 0

Quote from: drak24 on June 12, 2017, 02:51:10 AM

Quote from: cprieto on June 11, 2017, 08:22:52 PM

Hello,

Have you guys tried Dual mining with GTX 1070 cards? hows your hash? its decent compared to rx 480/580 series

This is my hash dual mining on rx 480

ETH - Total Speed: 29.143 Mh/s SC - Total Speed: 582.858 Mh/s

I tried to find some information, i found a guy on youtube hashing 200-300 when dual mining.. its normal?

Regards

What are your settings to get 29? I have 2 rx 480s in my system dual mining the same coins. I get 24 on both cards for ETH and 1200+ for SC using dcri 22. If it's higher, I get a higher SC hash rate but slightly lower ETH hash rate. If I lower it under 22, ETH stays the same at 24/card, but SC gets lower. I'm running both cards at 0 mV (I keep it there to prevent crashes), 0 power limit, 90 temp limit, 1154 core clock, 2228 memory clock (I notice no difference increasing this to 2250), custom fan speed.

Any suggestions would be appreciated.

well. i have 2 msi rx 480 4gb, 1 rx sapphire 4gb, 1 xfx rx 480 8gb

stock i get about 24-26. flashed 28-29..

did you flashed your cards?

regards

Quote from: ?? on ??

How about mining using RX 570?

pretty decent 27-28 (Solo mining)..

seljak

member

Activity: 101

Merit: 10

After windows update i get an error:

The aplication was unable to start correctly(0xc000007b).

Is there a solution to this problem?

rozsada

member

Activity: 105

Merit: 10

hi guys, need your help!
I want to monitor remotely (in another house) a rig. I have the ip and the local ip.
How to do that?

h!ghC

newbie

Activity: 10

Merit: 0

Hello,

I have some trouble using this miner. It seems to connect to the mining pool (suprnova.cc) but it doesn't mine. There are no "Share accepted" notices:

http://www.imagebanana.com/view/5x1258l7/Unbenannt.PNG

This is my config:

Code:

-epool stratum+tcp://eth.suprnova.cc:5000
-ewal username.eth1
-epsw xyz
-esm 3
-dpool stratum+tcp://dcr.suprnova.cc:3252
-dwal username.dcr1
-dpsw xyz
-mode 1
-allpools 1

Any idea why it doesn't work?

Best

matttheazn

newbie

Activity: 8

Merit: 0

I am having issues with under volting and the gpu index changing every restart. I am using 7 rx 580's 3 are xfx and 4 are rog strix(does this have anything to due with my problem?). I am trying to under volt in the start.bat command line, and every restart of my pc it seems as though the index is changing. Is there a way to permanently set the gpu index? Is it possible to program under volts in the bios? The rog strix cards seem to want to eat around 200w when dual mining. I was able to set up the 3 xfx cards dual mining at 130w. Please Help, Thank you.

seljak

member

Activity: 101

Merit: 10

What is the recomended driver for nvidia pascal?
Thanks.

Authentic77

newbie

Activity: 1

Merit: 0

Hey guys,

I am seeing some fluctuation on my current effective rate for ETH. I am currently dual mining ETH/SIA with a - dcri 16, - ethi 8. Not getting any incorrect shares in over 24hrs.

https://ethermine.org/miners/80cce4a14e22414bd870c024584abcb1a0666cf6

As you can see the graph moves from around 85 Mh/s up to 130Mh/s. Is this normal? I would expect the fluctuations to be in around the 5-6% mark.

justapoorv

newbie

Activity: 2

Merit: 0

Quote from: deadsix on June 12, 2017, 04:48:47 AM

Quote from: davescream on June 12, 2017, 04:33:20 AM

Quote from: justapoorv on June 12, 2017, 04:26:39 AM

Hi Guys
Can we split the output from each GPU to different wallets using claymore miner?
I am fine with splitting either the time(like 30 mins to one wallet and 30 mins to second wallet) or the GPU output(like GPU 0,1,2 to wallet 1 and GPU 3,4,5 to wallet 2) to each wallet.
I have a home rig and want to automatically split the payment received to my account and my friends account.
any help will be appreciated.

you can make separate configfiles for you and your friend with your own wallets, and then use windows task sheduler to run miner with friends config or your config.

the bat file is simple at 12:00 run this bat file:

taskkill /f /IM EthDcrMiner64.exe
EthDcrMiner64.exe c:\pathtoyour\config_friend.txt

at 00:00 run this

taskkill /f /IM EthDcrMiner64.exe
EthDcrMiner64.exe c:\pathtoyour\config_myself.txt

the explanation of config file you can see in miners folder "config.txt"

but miner may crash or somethink i think it is bad idea. As I know, claymore miner cannot mine to different wallets for now. Only your wallet and developers wallet for fee.

Or ... just create two batch files to run two instances of the miner parallely, assign 0,1,2 to the first wallet, and 3,4,5 to the second. Use the -di option to set which gpuz to be used on which batch file.
For instance, first batch file would have your eth address, and -di 0,1,2. The Second batch file woult have your friends eth address and -di 3,4,5

Hi Deadsix
I tried with this method however when I give a command to close the miner, the new instance is not starting. taskkill /f /IM EthDcrMiner64.exe
Also the -di command gives errors when not using all gpus
Any other idea will be appreciated.

tommy1735

member

Activity: 89

Merit: 12

Quote from: Aquazi on June 12, 2017, 05:55:42 AM

Quote from: tommy1735 on June 12, 2017, 04:54:54 AM

the -cvddc command does not work with RX 580 does it?
i tried set it to -cvddc 850 but gpuz shows 1.0000V

-fanmin 60 -fanmax 90 has no effect too i think... or can MSI afterburner be the Problem?

thanks for this nice miner

You can't get a lower voltage on the core than the memories.

This means that if you have memories at 1000 mV core won't get under 1000 regardless.

i did not change anything on mem V but when i set core voltage -100 in msi AB i can see 0.8250 VDDC in GPUz
looks like core and memories voltage has nothing to do with each other... where you got your information from?

i have a problem with 1 of my 3 RX 580 that its 70+°C even with 0.8250V and only 1000 core 2000 mem... thinking of disassemble and check the heat paste or put some new on it
other 2 RX 580 runs very good at ~60°C

Aquazi

full member

Activity: 215

Merit: 100

Quote from: tommy1735 on June 12, 2017, 04:54:54 AM

the -cvddc command does not work with RX 580 does it?
i tried set it to -cvddc 850 but gpuz shows 1.0000V

-fanmin 60 -fanmax 90 has no effect too i think... or can MSI afterburner be the Problem?

thanks for this nice miner

You can't get a lower voltage on the core than the memories.

This means that if you have memories at 1000 mV core won't get under 1000 regardless.

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 827. (Read 6590718 times)