Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 858. (Read 6590718 times)

Same with me, around 5-6% lower 24h average than reported. Any ideas?

Guys help please !!!
I launched the mining on the two while the cards.
Created a config file with these parameters:

-epool eu1-etc.ethermine.org:4444
-ewal 0xAD61Cc52a630f6D8697f795163a4DB342543C059
-epsw x
-dpool dcr.coinmine.pl:2222
-dwal name when registering the name of the clerk
-dpsw password of a clerk
-esm 2
-mode 0
-tt 70
-asm 2
-etha 0.0
-ethi 11.11

I ran the ethdcrminer64 file and produced this screen.
http://savepic.ru/14211059.png

What for FAILOVER 1 ?? Why are there other pools shown?
The cards in the dual are buzzing, everything is cut off for now (

Maybe because when you run ethdcrminer64, the default miner refers to something?
Then he launched a batch file for the Classic air, on Nanopoula.
http://savepic.ru/14201843.jpg

The temperature of the Power Supply program showed this:
http://savepic.ru/14192627.jpg

Hash on the first map (to which the monik is connected), fell a couple of times to 10, then equalized. And she was hot somehow.
Later he left for a couple of minutes, returned, but the monik does not burn, the first card does not spin, the second one threshes.
Monique turned off, then turned on, wrote there is no video adapter. It rebooted, did not help, poked the adapters from VGA to HDMI, again it was loaded, the card spun, the system got stuck.

But the batch file from the Claymore folder disappeared, did not find it and was upset (
Firewood version 16.9.1, auto-update disabled, Windows 7 64 bit.

Maps Sapphire RX480 8 GB, memory Mikron, while nothing sewed, did not disperse anything.
The food is served until 2 cards, two cards are in the rig, but the power wires are not connected yet.
Raisers on the mallekus feed, on two cards one wire.

Power Supply Corsair PM1000i, it does not rotate by the way.

What now?
Who can help properly configure these batars? There is a suspicion that in the batnik the speed of the fans is incorrectly specified and they are heated and rotate a little, and the dual is generally hard (probably wrong did something (

The first farm already does not work stably (

Why do I only get 22 mh/s with each of my RX 580's 8gb? I figured these guys would get at least 26+. What am I doing wrong? Here is my batch file...

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool us2.ethermine.org14444 -ewal 0x0c62Ff143f51f4320F9408ED86f0B01128EE764A.rig3 -epsw x -dpool stratum+tcpsiamining.com7777  -dwal 3896d72f4860695c165692a06cd46f035d438d034d2c9b32e3bdf879a5174d55ec40bc51d80f.ri g3 -dpsw x -dcoin sia

Hey claymore, moving smaller chunks around is quicker and results in faster hashing right? What if you compress the DAG?

Can anyone fix my problems? please

Can the default job timeout detecion be changed from 15 minutes to less?

I would say that 95% is a good result. I am getting 90%. Impressive hash rates from 4 workes. Is it 31 Mhs from 1 card? What make and model and settings on them?

What is your source? I am using 9.4

29,4 Mh/s - is the first idea.
Read the first page of this thread thoroughly - is the second idea.

Try this key with value 1.

-eres   this setting is related to Ethereum mining stability. Every next Ethereum epoch requires a bit more GPU memory, miner can crash during reallocating GPU buffer for new DAG.
   To avoid it, miner reserves a bit larger GPU buffer at startup, so it can process several epochs without buffer reallocation.
   This setting defines how many epochs miner must foresee when it reserves GPU buffer, i.e. how many epochs will be processed without buffer reallocation. Default value is 2.

How do I know if the devfell is being mined in the poll I'm using?
miningpoolhub.com

It's the operating system and motherboard that needs to support more gpu,  not the application.

My effective hashrate can get erratic like that too sometimes..

Is this normal?

Effective Hash Rate / Reported is right at 95%

Guys,

I have all ways been using single miner and read somewhere that dual mining would not affect the ETH mining. I have been trying but it does. Is there any specific command? I have tried -ASM 2 but it still the same when I mine ETH and SC. ETH still goes down when i dual mine.

The lastest version is 9.4? but everyone uses 9.2?

why?

I'm in a similar situation where I have ordered 4x XFX RX470, 1x MSI RX470 and 1x 570, will try this pixel patcher and will let you know if I would be able to mine with this configuration.

I'm using Claymore only for Ethereum mining (not dual mining) but I get accepted shares rare, which factors affects the overall performance to get accepted shares.

My OS is Windows 10 64-Bit, and internet speed is 15Mbps stable, the graphic is MSI RX 470 Gaming and I'm planing to put in the upcoming days 4 more GPU XFX RX 470

I've just started playing around with the standalone miner, I usualy use nicehash.

I know nvidia cards are not the best at ETH, but Ive seen a few posts stating that 20+Mhs should be possible on a 980ti.

I'm getting 2.XXX Mhs when testing with the default settings, and I cant find what I'm missing....

The system lags incredible bad, as in move mouse, wait 5s to see where it ends up.


Driver version is 382.5

you need to configure the EPOOLS arquive and remove the "#" and configure with the info of your supernova pool and miner.

Guys if you have trouble with dag file upload just expand virtual memory. It will do the trick