Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 861.

Teress

full member

Activity: 224

Merit: 102

Quote from: OverEasy on May 29, 2017, 06:06:11 AM

Quote from: Teress on May 29, 2017, 04:55:14 AM

Quote from: OverEasy on May 28, 2017, 07:38:10 PM

Anyone managed to get 4xx and 5xx running on same rig?
Man I think I tried about everything now.

I got 2x 470 (modded)
2x 480 (modded)
1 570 (modded)

With the Crimson 16.x.x drivers I can easily get my 470's and 480's but the darn 580 just shows as standard VGA.

I even tried the latest greatest 17.something driver and that was a mess lol. It showed all 5 cards but never would actually load the drivers correctly..

Grrr gotta be a way lol....

Yes. I have mixed rig with 480 and 570. Simply use latest AMD driver, patch it and start mining

Could you explain or link to the patch please? I think your talking about skipping sig check but i have never done that. Thanks for any help

Uf, I am getting sick of people who dont want to spent their time and search on google, rather spent time of others, who wants to help. Next time I will better not help.

Google for atikmdag-patcher...

brether

newbie

Activity: 4

Merit: 0

Hey,

I am struggling to get -cclock and -mclock options to work with my new AMD 580 on Ubuntu 16.04. -fanmin and -fanmax work ok.

I do get message "AMD ADL Library not found" - I suspect it's related to that but my understanding is that AMD 580 doesn't support the Catalyst drivers on Linux?

Any ideas?

Newton90

sr. member

Activity: 463

Merit: 256

does anyone know why 4 of 6 cards mine with low hashrate?asus gtx1060 o3g, tdp65%, core +170,claymore 9.4,win 8.1,driver 382.33.on other rig the same cards with the same sets works fine.thx.

Victorio

full member

Activity: 281

Merit: 100

Quote from: honorbtc on May 28, 2017, 02:04:21 PM

Hello guys, I have a problem with one of my rx 470.

I'd try to install the card in the x16 slot on a separate motherboard, flash the original BIOS, check the performance, then flash the biosmod with your favorite memory straps and do the fine tuning with Wattool, checking the performance at each iteration.

OverEasy

sr. member

Activity: 301

Merit: 251

Quote from: Teress on May 29, 2017, 04:55:14 AM

Quote from: OverEasy on May 28, 2017, 07:38:10 PM

Anyone managed to get 4xx and 5xx running on same rig?
Man I think I tried about everything now.

I got 2x 470 (modded)
2x 480 (modded)
1 570 (modded)

With the Crimson 16.x.x drivers I can easily get my 470's and 480's but the darn 580 just shows as standard VGA.

I even tried the latest greatest 17.something driver and that was a mess lol. It showed all 5 cards but never would actually load the drivers correctly..

Grrr gotta be a way lol....

Yes. I have mixed rig with 480 and 570. Simply use latest AMD driver, patch it and start mining

Could you explain or link to the patch please? I think your talking about skipping sig check but i have never done that. Thanks for any help

jackbox

legendary

Activity: 1246

Merit: 1024

Quote from: Victorio on May 29, 2017, 05:57:25 AM

Quote from: drrobert on May 28, 2017, 08:19:25 AM

Hi claymore can you add shared acceped / invalid by gpu index on json
will be very userfull to adjust overclock by gpu.
thanks.

I second that. Parsing manually the log takes a lot of time.

Ver 9.4 already shows shares accepted per GPU. Having the invalid shares also would be useful.

Victorio

full member

Activity: 281

Merit: 100

Quote from: drrobert on May 28, 2017, 08:19:25 AM

Hi claymore can you add shared acceped / invalid by gpu index on json
will be very userfull to adjust overclock by gpu.
thanks.

I second that. Parsing manually the log takes a lot of time.

Teress

full member

Activity: 224

Merit: 102

Quote from: OverEasy on May 28, 2017, 07:38:10 PM

Anyone managed to get 4xx and 5xx running on same rig?
Man I think I tried about everything now.

I got 2x 470 (modded)
2x 480 (modded)
1 570 (modded)

With the Crimson 16.x.x drivers I can easily get my 470's and 480's but the darn 580 just shows as standard VGA.

I even tried the latest greatest 17.something driver and that was a mess lol. It showed all 5 cards but never would actually load the drivers correctly..

Grrr gotta be a way lol....

Yes. I have mixed rig with 480 and 570. Simply use latest AMD driver, patch it and start mining

Nokia555

sr. member

Activity: 392

Merit: 266

EthMonitoring.com

Quote from: TechPark on May 28, 2017, 07:37:44 PM

Could you please share your knowledge. I would like to know how to configure remote notifications and watchdogs on my rigs.

What notifications do you need?

cavoisathu

newbie

Activity: 3

Merit: 0

Can I disable the statist of the Dcr mining?? (Dual mining is must working, hide the yellow line in Claymore cmd window)

Plumbus

newbie

Activity: 45

Merit: 0

Quote from: induktor on May 28, 2017, 09:33:05 PM

Quote from: Plumbus on May 28, 2017, 07:44:09 PM

Are the voltage command line options still only available on windows?

depends if you are talking about AMD or nvidia, on nvidia as long as you are on driver 370 and UP and have coolbits activated properly you can touch voltages, a little dangerous on nvidia though, but your choice

, i only play with core and mem values

It works with AMD on Linux?

induktor

hero member

Activity: 710

Merit: 502

Quote from: Plumbus on May 28, 2017, 07:44:09 PM

Are the voltage command line options still only available on windows?

depends if you are talking about AMD or nvidia, on nvidia as long as you are on driver 370 and UP and have coolbits activated properly you can touch voltages, a little dangerous on nvidia though, but your choice

, i only play with core and mem values

Plumbus

newbie

Activity: 45

Merit: 0

Are the voltage command line options still only available on windows?

OverEasy

sr. member

Activity: 301

Merit: 251

Anyone managed to get 4xx and 5xx running on same rig?
Man I think I tried about everything now.

I got 2x 470 (modded)
2x 480 (modded)
1 570 (modded)

With the Crimson 16.x.x drivers I can easily get my 470's and 480's but the darn 580 just shows as standard VGA.

I even tried the latest greatest 17.something driver and that was a mess lol. It showed all 5 cards but never would actually load the drivers correctly..

Grrr gotta be a way lol....

TechPark

full member

Activity: 238

Merit: 100

Quote from: induktor on May 28, 2017, 07:32:12 PM

Quote from: Nokia555 on May 28, 2017, 10:55:12 AM

Quote from: induktor on May 28, 2017, 10:52:43 AM

Hello Claymore, guys!

this is the first time i use claymore miner (9.4) on lubuntu 1404, GTX 1060 x 5, works fantastic right out of the box, BUT, it only output stats every 4 minutes or so, is there is any way to change that? so it can output stats every 1 minute instead??

i ask that because i have scripts that reads the miner output to the syslog and show it on an LCD display, the script runs once a minute but with claymore i only got stats every 4 or 5 minutes.

just would like to change that, any way i can do it?, i am using mode 1

thank you
indkt.

Hi, why don't you use the API for stats? If you need any help with, let me know.
Also for online access: https://github.com/JamesSmith2/EthMonitoring

Hi Thanks for replying
This rig has a lot of different miners for different algos, all of the output is done to the syslog on ramdisk, and a lot of scripts reads from there, this API is propietary from claymore only works with claymore miner, i already have everything working on all the other miners, the display updating, including temperatures, fan speeds, powerusage, webpage with all the stats, the watchdog programs that turn off cards if they go to high in temp, the remote notification system, etc i won't make everything again just for one specific miner.
it has to be a way to output stats faster and not every 5 minutes!, it is the only miner that does it!.
thanks
indkt.

Could you please share your knowledge. I would like to know how to configure remote notifications and watchdogs on my rigs.

induktor

hero member

Activity: 710

Merit: 502

Quote from: Nokia555 on May 28, 2017, 10:55:12 AM

Quote from: induktor on May 28, 2017, 10:52:43 AM

Hello Claymore, guys!

this is the first time i use claymore miner (9.4) on lubuntu 1404, GTX 1060 x 5, works fantastic right out of the box, BUT, it only output stats every 4 minutes or so, is there is any way to change that? so it can output stats every 1 minute instead??

i ask that because i have scripts that reads the miner output to the syslog and show it on an LCD display, the script runs once a minute but with claymore i only got stats every 4 or 5 minutes.

just would like to change that, any way i can do it?, i am using mode 1

thank you
indkt.

Hi, why don't you use the API for stats? If you need any help with, let me know.
Also for online access: https://github.com/JamesSmith2/EthMonitoring

Hi Thanks for replying
This rig has a lot of different miners for different algos, all of the output is done to the syslog on ramdisk, and a lot of scripts reads from there, this API is propietary from claymore only works with claymore miner, i already have everything working on all the other miners, the display updating, including temperatures, fan speeds, powerusage, webpage with all the stats, the watchdog programs that turn off cards if they go to high in temp, the remote notification system, etc i won't make everything again just for one specific miner.
it has to be a way to output stats faster and not every 5 minutes!, it is the only miner that does it!.
thanks
indkt.

TechPark

full member

Activity: 238

Merit: 100

Quote from: spyshagg on May 27, 2017, 03:20:11 PM

@Claymore

The miner doesn't apply -cvddc less than 900mv on my RX570

-cvddc 880 applies the same voltage as -cvddc 900

Is it by design? I could still knock some watts down if it allowed me to.

I noticed the same. I have a mix of RX cards and cvddc key does not work consistently. It is applied to some cards not not to all. MSI AB does work though.

sp00lin9

hero member

Activity: 490

Merit: 500

Quote from: nils8107 on May 28, 2017, 05:40:43 AM

Hi all

I have a GTX 1080& GTX 970. Not SLI connected...
I run V9.4 but my GTX970 only makes about 3MH/s

I try fix this issue several hours. Cant figure out why its not working.
Somebody have any Ideas what I`m doing wrong?

Thank you so much

Run your rig on linux, its going to be tough to find the cuda 6.5 drivers we need for the 9 series cards..

eodgooch

newbie

Activity: 2

Merit: 0

hello miners! I'm having some difficulty. I'm seeing "ETH: Share rejected!" and "ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s" even though the graphics cards are recognized. I've worked through some other issues with the amdgpu pro and linux kernel errors but this has me stumped. No errors in dmesg and I'm lost. Please help!

Code:

AMD Cards available: 3
GPU #0: Ellesmere, 8169 MB available, 36 compute units
GPU #0 recognized as Radeon RX 480/580
GPU #1: Ellesmere, 8169 MB available, 36 compute units
GPU #1 recognized as Radeon RX 480/580
GPU #2: Ellesmere, 8169 MB available, 36 compute units
GPU #2 recognized as Radeon RX 480/580
POOL/SOLO version
GPU #0: algorithm ASM
GPU #1: algorithm ASM
GPU #2: algorithm ASM
No NVIDIA CUDA GPUs detected.
Total cards: 3
AMD ADL library not found.
ETH: Stratum - connecting to 'us2.ethpool.org' <149.56.26.222> port 3333
ETH: Stratum - Connected (us2.ethpool.org:3333)
DUAL MINING MODE ENABLED: ETHEREUM+SIACOIN
ETH: eth-proxy stratum mode
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

SC - connecting to sia-us-west1.nanopool.org:9980/miner/header?address=4e216fcf7c91739469faf7c58b08543f2fe083b2a67870cb0d326cc6593fd7e6e4c3ff72969b
ETH: Share rejected!
Socket was closed remotely (by pool)
ETH: Job timeout, disconnect, retry in 20 sec...
SC: Connected (sia-us-west1.nanopool.org:9980/miner/header?address=4e216fcf7c91739469faf7c58b08543f2fe083b2a67870cb0d326cc6593fd7e6e4c3ff72969b)

GPU #0: Ellesmere, 8169 MB available, 36 compute units
GPU #1: Ellesmere, 8169 MB available, 36 compute units
GPU #2: Ellesmere, 8169 MB available, 36 compute units
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0(0+0+0), Rejected: 1, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s
SC - Total Speed: 0.000 Mh/s, Total Shares: 0(0+0+0), Rejected: 0
SC: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s
Incorrect ETH shares: none
Pool switches: ETH - 0, SC - 0
Current SC share target: 0x0000000007547ff5 (diff: 150GH)
GPU0 t=33C fan=31%, GPU1 t=25C fan=23%, GPU2 t=26C fan=16%

and CLINFO important bits

Code:

718- Device Vendor Advanced Micro Devices, Inc.
797- Device Vendor ID 0x1002
854- Device Version OpenCL 1.2 AMD-APP (2348.3)
932- Driver Version 2348.3
989- Device OpenCL C Version OpenCL C 1.2
1053: Device Type GPU
1107- Device Profile FULL_PROFILE
1170- Device Board Name (AMD) AMD Radeon (TM) RX 480 Graphics
1252- Device Topology (AMD) PCI-E, 01:00.0
1317- Max compute units 36
1370- SIMD per compute unit (AMD) 4
--
7490- Device Vendor Advanced Micro Devices, Inc.
7569- Device Vendor ID 0x1002
7626- Device Version OpenCL 1.2 AMD-APP (2348.3)
7704- Driver Version 2348.3
7761- Device OpenCL C Version OpenCL C 1.2
7825: Device Type GPU
7879- Device Profile FULL_PROFILE
7942- Device Board Name (AMD) Radeon RX 580 Series
8013- Device Topology (AMD) PCI-E, 03:00.0
8078- Max compute units 36
8131- SIMD per compute unit (AMD) 4
--
14251- Device Vendor Advanced Micro Devices, Inc.
14330- Device Vendor ID 0x1002
14387- Device Version OpenCL 1.2 AMD-APP (2348.3)
14465- Driver Version 2348.3
14522- Device OpenCL C Version OpenCL C 1.2
14586: Device Type GPU
14640- Device Profile FULL_PROFILE
14703- Device Board Name (AMD) AMD Radeon (TM) RX 480 Graphics
14785- Device Topology (AMD) PCI-E, 04:00.0
14850- Max compute units 36
14903- SIMD per compute unit (AMD) 4
--
26816- clGetPlatformInfo(NULL, CL_PLATFORM_NAME, ...) No platform
26878- clGetDeviceIDs(NULL, CL_DEVICE_TYPE_ALL, ...) No platform
26940- clCreateContext(NULL, ...) [default] No platform
27002- clCreateContext(NULL, ...) [other] Success [AMD]
27066- clCreateContextFromType(NULL, CL_DEVICE_TYPE_CPU) No platform
27131: clCreateContextFromType(NULL, CL_DEVICE_TYPE_GPU) No platform
27196- clCreateContextFromType(NULL, CL_DEVICE_TYPE_ACCELERATOR) No platform
27269- clCreateContextFromType(NULL, CL_DEVICE_TYPE_CUSTOM) No platform
27337- clCreateContextFromType(NULL, CL_DEVICE_TYPE_ALL) No platform

mantor84

member

Activity: 63

Merit: 10

Quote from: mantor84 on May 26, 2017, 12:42:22 PM

Quote from: mantor84 on May 26, 2017, 01:51:47 AM

Quote from: MinerosYV on May 25, 2017, 07:59:53 PM

Quote from: mantor84 on May 25, 2017, 07:34:08 PM

hi guys...I really need your help.

I don't know why...but the watchdog error is killing me. I mean I have no idea what I could do to solve this issue.

My current rig looks like that:
7x RX580 Sapphire Nitro+ 8GB
8GB RAM
Windows 10
Virtual Memory min 2000 max 50000 (increased that much just to see if its working better...but it isn't)
Temp: 52-58°C
Fan: 60%
- ethi 4
- gser 2

The hole system is running but after some minutes/hours I get an watchdog error mostly at GPU4.
I checked everything used new riser even from an other manufacturer but it doesn't work.

The new Claymore V9.4 miner doesn't help.

If I have an Watchdog error I need to reboot my hole system an normally restart of Claymore never worked for me even from the beginning. Undecided

My watchdog is looking like that:
01:14:59:055   1a28   watchdog - thread 0 (gpu0), hb time 109
01:14:59:056   1a28   watchdog - thread 1 (gpu0), hb time 31
01:14:59:056   1a28   watchdog - thread 2 (gpu1), hb time 94
01:14:59:056   1a28   watchdog - thread 3 (gpu1), hb time 16
01:14:59:056   1a28   watchdog - thread 4 (gpu2), hb time 47
01:14:59:056   1a28   watchdog - thread 5 (gpu2), hb time 125
01:14:59:057   1a28   watchdog - thread 6 (gpu3), hb time 31
01:14:59:057   1a28   watchdog - thread 7 (gpu3), hb time 109
01:14:59:057   1a28   watchdog - thread 8 (gpu4), hb time 8297
01:14:59:058   1a28   watchdog - thread 9 (gpu4), hb time 8375
01:14:59:058   1a28   watchdog - thread 10 (gpu5), hb time 47
01:14:59:058   1a28   watchdog - thread 11 (gpu5), hb time 125
01:14:59:058   1a28   watchdog - thread 12 (gpu6), hb time 141
01:14:59:059   1a28   watchdog - thread 13 (gpu6), hb time 63

GPU 4 watchdog is way too high... and I hope you can give me some tipps to solve this.

Am I the only one who has that issue? Huh

couldn't find a solution at www.

If you need more information let me know.

appreciate for any help.

PS: approx. 3-4 days ago I could mine over 100 hours in a row and I didn't change anything till then.

It sounds like W10 updated and is messing with it, we are having problems with the 7 cards rigs, since a couple of weeks as a resul of an update, reset your system to a previus date.
We had some space left on some other rigs so took it down to 5.
Thats why we are building no more that 4 cards rigs now.
Should try ti change the GPU4 raiser just in case.

I had deactivated all W10 updates and all my GPUs can be detected in windows and with claymore.
So I think it should be OK with it... or not? Huh

I changed the raiser also once ...no effect.

Really strange and frustrating that watchdog issue it doesn't work for longer than 15min Angry

I've OC all cards the same like that "if its important"
GPU clock: 1150
Memory clock: 2150
GPU voltage: -75mv
Hynix all 7 gpus

Started Dual mining again (ETH + DCR) and it's running for almost 4,5hours without a watchdog error.
Can it be that only ETH mining is buggy with the Claymore client?
Didn't change anything just switched back to ETH+DCR instead of only ETH mining and it seems to run.

Will let you know if its fine now or if the watchdog error comes back.

btw does anyone else have problems with only ETH mining on the Claymore client?

Short Update: If anyone was interested
Dual Mining is working without issues... right now 55hours in a row.
No changes at the GPU or Bios... don't know why but only ETH mining is not working for me.
GPU 4 is getting the watchdog issue all the time after some minutes.

So if you have issues with the watchdog ...try to use the dual mine feature.

PS.: If anyone has a solution for that please let me know.

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 861. (Read 6590565 times)