Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 862. (Read 6590718 times)

Hi, I downloaded 16.11.5 from AMD. When I run the GPU-Z utility it reports the driver is 16.11.5 beta. Is that correct? I can't find another version anywhere.

Thanks,

Brian

Hello guys, I have a problem with one of my rx 470.

It's a MSI gaming 4gb, used to make ETH only 28,5 Mh/s with :

1500 straps, -60mV core, 1150 core, 2000 mem, claymore 9.4, crimson 16.9.2

Now, after trying ETH +SCI (that happened about a the same time that windows 10 downgraded the drivers to 16.6), it was doing 18 MH/s ETH + 560 SC, which i first thought was normal.

Now, i'm getting more and more gpu Watchdog hang problem. The miner restart the GPU works fine for 1 to 6 hours then hang again.

Played with -dcri and managed to get 25 / 400 once, but can't achieve that again. (and the hanging problem didn't disapear)
increased core voltage and speed, hang problem still there after about 1 hour of mining.

I went back to ETH only to see if the problem comes from the dual mining, but now the card mine at only 25 MH/s.

Uninstalled MSI afterburner, uninstalled drivers with DDU, installed 17.4.3 patched with atikmdag, reinstalled afterburner = same hashing speed.
Uninstalled 17.4.3 and reinstalled 16.9.2 = still 25 MH/s
Changed bios to 1750 straps, nothing changed.

System :
-Windows 10
-8 gb ram
-750W bronze corsair PSU
-also mining with a 7950 on another miner, never had a problem with this one.

All my other rigs with rx 470 are running stable with ETH for weeks (except one that the fan randomly hit 100% until I reboot, but that's another story less urgent)

Anyone has an idea?

(Edit : very stable 20 MH/s ETH only -18mV core 1050 MHz, 1750 mem , no hardware errors in 3.5 hours... but that's very low, my 1 fan XFX is doing 24.5 MH/s with the same settings)

Hi, why don't you use the API for stats? If you need any help with, let me know.
Also for online access: https://github.com/JamesSmith2/EthMonitoring

Hello Claymore, guys!

this is the first time i use claymore miner (9.4) on lubuntu 1404, GTX 1060 x 5, works fantastic right out of the box, BUT, it only output stats every 4 minutes or so, is there is any way to change that? so it can output stats every 1 minute instead??

i ask that because i have scripts that reads the miner output to the syslog and show it on an LCD display, the script runs once a minute but with claymore i only got stats every 4 or 5 minutes.

just would like to change that, any way i can do it?, i am using mode 1

thank you
indkt.

Has anyone managed to extract the newest AMD drivers? (amdgpu-pro-17.10-414273.tar.xz)
I enter and I'm getting an error.

thank you buddy...ill try

You are going to need try the dcri values by chaning them with keyboard +/- untils its good ratio between two mh/s-es.

anybody help me to improve my bat file?

thanks!

@Claymore

For some reason, using 9.4, I cannot mine SC on miningpoolhub anymore, keeps disconnecting, am I missing something here?

Heres ie my command, works in 9.1-3, not on 9.4: EthDcrMiner64.exe -r 1 -asm 1 -dcri 17 -retrydelay 5 -epool europe.ethash-hub.miningpoolhub.com:17020 -esm 2 -ewal tperalta82.TheRig -epsw x -eworker tperalta82.TheRig  -dpool stratum+tcp://hub.miningpoolhub.com:20550 -dwal tperalta82.TheRig -dpsw x -dcoin sc -allpools 1 -allcoins 1

Hi claymore can you add shared acceped / invalid by gpu index on json
will be very userfull to adjust overclock by gpu.
thanks.

Ok, I will add it in next update.

How i can decrease load on Nvidia card? If i mine and use the card for internet or just windows serfing, i see GUI and mouse cursor lags.

I have searched but still need some advice how to setup EthOS Claymore for dual ETH+DCR. My ETH is going to my wallet correctly but I'm having troubles setting up my DCR to mine to Suprnova. Any tutorials, links, videos on how to set up dual mining on EthOS?

Thank you very much for you cool miner.

I using v.9.3. for dual mining ETH+Pasc and notice this strange behavior:


I.  In the log I see some enonce but miner send to pool other one:

11:30:46:478   10f0   PASC: put share nonce 30909ba enonce 275
11:30:46:497   10f0   PASC round found 1 shares
11:30:46:515   330    PASC: 05/28/17-11:30:46 - SHARE FOUND - (GPU 2)
11:30:46:515   330   send: {"params": ["yfife5.wm", "1002", "3237643030303030", "592A8AB3", "ba090903"], "id": 4, "method": "mining.submit"}

Here enonce= "275" but send "27d00000" (if convert to ASCII).  And it happens all time. Send "enonce + 8" (275+8 = 27d)

II. But the worth thing is when enonce growth out of 3 digit. The miner continue send (and calculate) only first 3 digit:

11:34:03:392   139c   PASC: put share nonce 30909ba enonce 27c8
11:34:03:392   139c   PASC round found 1 shares
11:34:03:408   330    PASC: 05/28/17-11:34:03 - SHARE FOUND - (GPU 0)
11:34:03:408   330   send: {"params": ["yfife5.wm", "1002", "3237643030303030", "592A8AB3", "ba090903"], "id": 4, "method": "mining.submit"}

You can see here the same nonce as in previous example, but enonce must be "27c8" but sending the same "27d00000". (actually miner works correct 27c8+8 = 27d0, but when adding "0000" it looks like "27d" + "00000").

So can you add "0" before enonce, like this "000027d0". It will increase real hashrate by 1/16 (6.25%), because now we calculate the same hashes for different enonce (each hash for enonce "xx" equal hash for enonce "xx8").

Also, will be good, to add solo mining mode for Pascal.

i have the same issue and i cant figure it out.  from what i concluded though, i think its a windows 10 issue.

Hi all

I have a GTX 1080& GTX 970. Not SLI connected...
I run V9.4 but my GTX970 only makes about 3MH/s

https://www2.pic-upload.de/img/33241156/niningGPU.jpg

I try fix this issue several hours. Cant figure out why its not working.
Somebody have any Ideas what I`m doing wrong?

Thank you so much

Kind of curious, I just put a MSI Z170 M5 MB with 2 Evga gtx 1060's and installed the drivers but only see's one card. On boot, shows both card led's lit then turns off the second one and Claymore sees only one but runs good. My Asus board right off sees the two. Wanted this board as it is listed on the seven card systems. Any ideas?

thay

Hello,

What is the best amd driver, in terms of compatibility, for Claymore 9.4 ?
--------------------------
Cards - RX 580
OS - Win 10

I have 980s as well & I need to run em on linux for best performance.