Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 860.

TechPark

full member

Activity: 238

Merit: 100

Quote from: Nokia555 on May 28, 2017, 11:08:26 PM

Quote from: TechPark on May 28, 2017, 06:37:44 PM

Could you please share your knowledge. I would like to know how to configure remote notifications and watchdogs on my rigs.

What notifications do you need?

The main one is to know when mining stops, the secondary is when the hash rate decreases.

LJLT

newbie

Activity: 48

Merit: 0

Wich are the best driver today for Claymore 9.4 and RX470?

kisk

full member

Activity: 126

Merit: 100

Quote from: vince212 on May 29, 2017, 12:32:26 PM

can you help me choose for my 2nd build?

thinking of the rx 570s or gtx 1070.

paying about .26kw/h USD

.26kw/h??? Holy sh.....

You definitely want RX cards man.

kisk

full member

Activity: 126

Merit: 100

Quote from: sp00lin9 on May 29, 2017, 06:12:18 PM

Quote from: Lad121 on May 29, 2017, 04:42:38 PM

I am getting a DAG error. I have 6gb of ram and two cards of 2gb. Here is the log file https://pastebin.com/fkdDWPzQ. If someone helps me mine ethereum, I will gladly tip him in btc.

You cant mine ether with 2GB cards anymore, the dag file itself is larger than that..

AFAIK Musicoin is the only Ethash you can mine with a 2GB card at this point (Not sure of UBQ's DAG size...)

Its still profitable as well... check the Pools page for info.

kisk

full member

Activity: 126

Merit: 100

Quote from: OverEasy on May 29, 2017, 10:03:47 AM

Quote from: Teress on May 29, 2017, 07:09:04 AM

Quote from: OverEasy on May 29, 2017, 05:06:11 AM

Quote from: Teress on May 29, 2017, 03:55:14 AM

Quote from: OverEasy on May 28, 2017, 06:38:10 PM

Anyone managed to get 4xx and 5xx running on same rig?
Man I think I tried about everything now.

I got 2x 470 (modded)
2x 480 (modded)
1 570 (modded)

With the Crimson 16.x.x drivers I can easily get my 470's and 480's but the darn 580 just shows as standard VGA.

I even tried the latest greatest 17.something driver and that was a mess lol. It showed all 5 cards but never would actually load the drivers correctly..

Grrr gotta be a way lol....

Yes. I have mixed rig with 480 and 570. Simply use latest AMD driver, patch it and start mining

Could you explain or link to the patch please? I think your talking about skipping sig check but i have never done that. Thanks for any help

Uf, I am getting sick of people who dont want to spent their time and search on google, rather spent time of others, who wants to help. Next time I will better not help.

Google for atikmdag-patcher...

I did spend my time googling and found many different ways to try it. I was simply asking how you did it for my benefit and of course any others reading this with same issues. I have used the patcher with the new drivers and now get past the loading drivers part. All 5 cards are now seen but one card is ALWAYS yellow triangle in device manager. I have switched ports, DDU'd and started over, everything I can come up with.
So now I got all 5 cards but one is non-working. So if a 470 is failed and I change the riser to another port and reboot then a 480 will be failed for example. The other 4 will mine. Anyone else have any suggestions (and yes I am researching for an answer elsewhere) lol

ALWAYS include your rig specs (all of them) and detailed error messages if you want real answers (for instance, what is the device manager error on the device?)

Sounds like a mobo PCIe setting issue, however no one would know for sure without knowing what mobo you're using. My last build had a very specific bios setup (Z170A).

sp00lin9

hero member

Activity: 490

Merit: 500

Quote from: Lad121 on May 29, 2017, 04:42:38 PM

I am getting a DAG error. I have 6gb of ram and two cards of 2gb. Here is the log file https://pastebin.com/fkdDWPzQ. If someone helps me mine ethereum, I will gladly tip him in btc.

You cant mine ether with 2GB cards anymore, the dag file itself is larger than that..

johnambush

full member

Activity: 228

Merit: 100

Quote from: Lad121 on May 29, 2017, 04:42:38 PM

I am getting a DAG error. I have 6gb of ram and two cards of 2gb. Here is the log file https://pastebin.com/fkdDWPzQ. If someone helps me mine ethereum, I will gladly tip him in btc.

You probably have less then 8 Gb memory. In that case you need to put more ram or extend virtual memory

http://www.pcworld.com/article/2840886/if-windows-virtual-memory-is-too-low-you-can-increase-it-but-there-are-trade-offs.html

Bwtmn7

member

Activity: 109

Merit: 10

Quote from: willi9974 on May 21, 2017, 04:28:27 PM

Here are my live stats,

ETH: 05/21/17-23:25:30 - New job from europe.ethash-hub.miningpoolhub.com:20535
ETH - Total Speed: 165.462 Mh/s, Total Shares: 313, Rejected: 0, Time: 03:03
ETH: GPU0 27.629 Mh/s, GPU1 27.510 Mh/s, GPU2 27.632 Mh/s, GPU3 27.416 Mh/s, GPU4 27.630 Mh/s, GPU5 27.646 Mh/s

SC - Total Speed: 2481.934 Mh/s, Total Shares: 174, Rejected: 0
SC: GPU0 414.435 Mh/s, GPU1 412.646 Mh/s, GPU2 414.473 Mh/s, GPU3 411.238 Mh/s, GPU4 414.445 Mh/s, GPU5 414.697 Mh/s

i have 6 cards and the bios are moded. on the top, the GPU are undervolted and the memory are running on a higher speed...

how did yo uget 27MH/s what video card model are you using? what core/memory clock speed?

Lad121

newbie

Activity: 1

Merit: 0

I am getting a DAG error. I have 6gb of ram and two cards of 2gb. Here is the log file https://pastebin.com/fkdDWPzQ. If someone helps me mine ethereum, I will gladly tip him in btc.

blacklig

sr. member

Activity: 504

Merit: 251

New to nVidia mining. Any help will be very appreciated

I am just configuring 2 rigs with 1060 and I cannot get more than 18.8 MH/s on ETH when OCed and not dual mining. How come I am always reading about 22 stock, 25 OCed etc?

What am I doing wrong?

One setup is like this:

4x 1060 3GB, MSI
Win7 pro, 6 GB Ram, some cheap Sempron, 700 W,
this miner (is any other maybe better?), last version drivers.

OC is currently +50 core, +600 mem. If I run them stock, they do only about 15 MH/s

Can you give me your ideas how to push those cards to better hashes?

I am thinking, would Win10 help me? (I tried, but couldnt somehow install nVidia drivers, always got issue with "not for this version of Windows..) Or could Linux help me? (but I dont know if those efficient miners exists for Linux?) Or maybe should I use different miner than this Claymores 9.4 dual?

Thanks

OverEasy

sr. member

Activity: 301

Merit: 251

Quote from: OverEasy on May 29, 2017, 10:03:47 AM

Quote from: Teress on May 29, 2017, 07:09:04 AM

Quote from: OverEasy on May 29, 2017, 05:06:11 AM

Quote from: Teress on May 29, 2017, 03:55:14 AM

Quote from: OverEasy on May 28, 2017, 06:38:10 PM

Anyone managed to get 4xx and 5xx running on same rig?
Man I think I tried about everything now.

I got 2x 470 (modded)
2x 480 (modded)
1 570 (modded)

With the Crimson 16.x.x drivers I can easily get my 470's and 480's but the darn 580 just shows as standard VGA.

I even tried the latest greatest 17.something driver and that was a mess lol. It showed all 5 cards but never would actually load the drivers correctly..

Grrr gotta be a way lol....

Yes. I have mixed rig with 480 and 570. Simply use latest AMD driver, patch it and start mining

Could you explain or link to the patch please? I think your talking about skipping sig check but i have never done that. Thanks for any help

Uf, I am getting sick of people who dont want to spent their time and search on google, rather spent time of others, who wants to help. Next time I will better not help.

Google for atikmdag-patcher...

I did spend my time googling and found many different ways to try it. I was simply asking how you did it for my benefit and of course any others reading this with same issues. I have used the patcher with the new drivers and now get past the loading drivers part. All 5 cards are now seen but one card is ALWAYS yellow triangle in device manager. I have switched ports, DDU'd and started over, everything I can come up with.
So now I got all 5 cards but one is non-working. So if a 470 is failed and I change the riser to another port and reboot then a 480 will be failed for example. The other 4 will mine. Anyone else have any suggestions (and yes I am researching for an answer elsewhere) lol

Well I finally gave up. Skipping sig check allowed new AMD drivers to fully load on 4 of the 5 cards. After numerous tries I could never get the 5th card past error 43 or whatever it was. I pulled the 570 out. Am now building yet another rig and will try again. This time all 570's and again with 5 cards. Fingers crossed...

AzzAz

legendary

Activity: 1030

Merit: 1006

Quote from: nisarga on May 29, 2017, 12:56:25 PM

Hi,

I'm mining with Claymore dual Ethereum miner 9.4 on my rx480+HD7870 rig (Eth only). RX 480 performs 26 Mh/s, but the HD7870 performs only 1.2 Mh/s instead of like 11-13 Mh/s. Any idea what causes that?
When mining Zcash on the same rig with Claymore Zcash miner, both GPUs are working 100%.

Thanks for ideas in advance.

Read about ETH. There is some "DAG"...Or read OP ( first page). Or google "eth mining". Make an effort to understand what are you doing.

nisarga

newbie

Activity: 2

Merit: 0

Hi,

I'm mining with Claymore dual Ethereum miner 9.4 on my rx480+HD7870 rig (Eth only). RX 480 performs 26 Mh/s, but the HD7870 performs only 1.2 Mh/s instead of like 11-13 Mh/s. Any idea what causes that?
When mining Zcash on the same rig with Claymore Zcash miner, both GPUs are working 100%.

Thanks for ideas in advance.

vince212

full member

Activity: 306

Merit: 100

can you help me choose for my 2nd build?

thinking of the rx 570s or gtx 1070.

paying about .26kw/h USD

pb2014

newbie

Activity: 32

Merit: 0

Hello guys I'm currently getting 13 Mh/s with my R9 280X. Is this about right for my card? I'm running the 9.2 version if that makes any difference.

Thanks in advance

Newton90

sr. member

Activity: 463

Merit: 256

Quote from: Newton90 on May 29, 2017, 06:28:34 AM

does anyone know why 4 of 6 cards mine with low hashrate?asus gtx1060 o3g, tdp65%, core +170,claymore 9.4,win 8.1,driver 382.33.on other rig the same cards with the same sets works fine.thx.

has same situation for etarminer.mb asus z170 pro.gpu mem not overclock.

OverEasy

sr. member

Activity: 301

Merit: 251

Quote from: Teress on May 29, 2017, 07:09:04 AM

Quote from: OverEasy on May 29, 2017, 05:06:11 AM

Quote from: Teress on May 29, 2017, 03:55:14 AM

Quote from: OverEasy on May 28, 2017, 06:38:10 PM

Anyone managed to get 4xx and 5xx running on same rig?
Man I think I tried about everything now.

I got 2x 470 (modded)
2x 480 (modded)
1 570 (modded)

With the Crimson 16.x.x drivers I can easily get my 470's and 480's but the darn 580 just shows as standard VGA.

I even tried the latest greatest 17.something driver and that was a mess lol. It showed all 5 cards but never would actually load the drivers correctly..

Grrr gotta be a way lol....

Yes. I have mixed rig with 480 and 570. Simply use latest AMD driver, patch it and start mining

Could you explain or link to the patch please? I think your talking about skipping sig check but i have never done that. Thanks for any help

Uf, I am getting sick of people who dont want to spent their time and search on google, rather spent time of others, who wants to help. Next time I will better not help.

Google for atikmdag-patcher...

I did spend my time googling and found many different ways to try it. I was simply asking how you did it for my benefit and of course any others reading this with same issues. I have used the patcher with the new drivers and now get past the loading drivers part. All 5 cards are now seen but one card is ALWAYS yellow triangle in device manager. I have switched ports, DDU'd and started over, everything I can come up with.
So now I got all 5 cards but one is non-working. So if a 470 is failed and I change the riser to another port and reboot then a 480 will be failed for example. The other 4 will mine. Anyone else have any suggestions (and yes I am researching for an answer elsewhere) lol

Winterlust

jr. member

Activity: 69

Merit: 2

x@XX:~/c$ ./ethdcrminer64 -epool eth.f2pool.com:8008 -ewal xxx -epsw x -eworker rig1
-bash: ./ethdcrminer64: cannot execute binary file: Exec format error

x@XX:~/c$ sudo ./ethdcrminer64 -epool eth.f2pool.com:8008 -ewal xxx -epsw x -eworker rig1
./ethdcrminer64: 1: ./ethdcrminer64: Syntax error: Unterminated quoted string

I'm getting an error on ppc64el architecture, isn't it supported?

AlainC

member

Activity: 91

Merit: 10

Quote from: bitcoinmining123456 on May 29, 2017, 07:41:17 AM

{This device cannot find enough free resources that it can use. (Code 12)If you want to use this device, you will need to disable one of the other devices on this system.}

It seems to be a problem with the motherboard limitations, or self config ?
https://technet.microsoft.com/fr-fr/library/cc732199(v=ws.10).aspx
either find a bad configuration in the PCI configuration in the BIOS/UEFI...

This thread gives a solution for one similar case:
http://discussions.virtualdr.com/showthread.php?231257-RESOLVED-Home-This-device-cannot-find-enough-free-resources-that-it-can-use-(code-12)

Quote

I finally contacted MSI and here's what they told me:

Ensure you have latest Bios update for your board (If you have not done so already). Please try with clearing the cmos setting on Jbat1 jumper/SW1 Switch or removing the battery on the mb out for 1 minute and put it back in with power off. Turn system back on load optimized default setting in bios cmos, save exit. If you didn’t start out with a clean/fresh load of Window please do so for best result. Also load all updates drivers for board chipset and hardware’s drivers. Finally check power supply, run with at least a 400 watt’s, verify RAM, video card, hard drives and CPU ensure they are not the cause of the issue. Thanks Note: Ensure you have proper cooling for processor and system to eliminate overheating issue.

I popped out the battery and re-installed it to clear the cmos, then set the bios to "optimized default" (I already had the latest bios installed), and re-installed XP.
It worked! I'm VERY happy. (I never cleared the cmos before (intentionally).

Can someone confirm my intuition?

bitcoinmining123456

newbie

Activity: 3

Merit: 0

I have 3 Sapphire RX 470 4gb and 2 sapphire 570 4gb in one rig but display adapter showing {This device cannot find enough free resources that it can use. (Code 12)If you want to use this device, you will need to disable one of the other devices on this system.} only 2 GPUs other 3 GPUs are not showing. I use z170a xpower gaming titanium motherboard, windows 10 64 bit, latest version AMD drivers 17.5.2 and I updated bios.

now, what do I now? anyone help me please to solve my problem. Thanks in advance

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 860. (Read 6590718 times)