@pustul
I currently am using GTX 1060's and I braved the over clock world. I can push mine to near 21 but just shy before I blue screen. I have to just accept that 20.5 is solid and go with it. Yours will go a bit faster but don't get greedy as all you will get is an unstable machine. Been there. Flaky board is the reason rig01 keeps dumping. New one in the works.
@Claymore
Many thanks for the S/W and your time. Single (eth) for now but going to go dual when rack goes live.
thay
Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 874. (Read 6590718 times)
May 22, 2017, 01:37:18 AM
May 22, 2017, 01:30:04 AM
oh. you're probably right. my bad 
May 22, 2017, 01:20:29 AM
The miner progressively shows/detects less and less memory for detected GPUs
When the miner starts it shows 8148 MB for each card, and it goes all the way down to 1000 MB per card. This can happen in an hour or in 12 hours. Stopping and restarting the miner fixes the problem.
OS: Ubuntu 16.04.1
AMD drivers: 16.30
All cards are ASUS ROG STRIX-RX480-8G-GAMING
Has anyone else experienced this?
@Claymore: Could it be that you are not releasing GPU memory between internal miner restarts?
When the miner starts it shows 8148 MB for each card, and it goes all the way down to 1000 MB per card. This can happen in an hour or in 12 hours. Stopping and restarting the miner fixes the problem.
OS: Ubuntu 16.04.1
AMD drivers: 16.30
All cards are ASUS ROG STRIX-RX480-8G-GAMING
Has anyone else experienced this?
@Claymore: Could it be that you are not releasing GPU memory between internal miner restarts?
Memleak when it fucks up. Then it restarts itself to hog more memory with the second copy of the DAG.
yes, definitely sounds like a memory leak to me.
grab some paper towels and check your motherboard/ram slots particularly, hopefully its not so bad that you are leaking underneath the rig too.
once i had stacked a couple rigs, like bunk beds you know.. so i could utilize the same 24" box fan for 14 gpu's.. and the top rig memory leaked all over the rig underneath it.. huge mess.
who would have thought all that fluid fits in such small semiconductors?
man i wish ram just ran on smoke like cpu's do..
Umm ... thats not what Wolf0 was referring to, memory leak means the program is unable to release memory it no longer is using causing memory usage to spike way above usual levels.
What you are talking about is thermal compound leaking oil or something.
May 22, 2017, 01:12:58 AM
The miner progressively shows/detects less and less memory for detected GPUs
When the miner starts it shows 8148 MB for each card, and it goes all the way down to 1000 MB per card. This can happen in an hour or in 12 hours. Stopping and restarting the miner fixes the problem.
OS: Ubuntu 16.04.1
AMD drivers: 16.30
All cards are ASUS ROG STRIX-RX480-8G-GAMING
Has anyone else experienced this?
@Claymore: Could it be that you are not releasing GPU memory between internal miner restarts?
When the miner starts it shows 8148 MB for each card, and it goes all the way down to 1000 MB per card. This can happen in an hour or in 12 hours. Stopping and restarting the miner fixes the problem.
OS: Ubuntu 16.04.1
AMD drivers: 16.30
All cards are ASUS ROG STRIX-RX480-8G-GAMING
Has anyone else experienced this?
@Claymore: Could it be that you are not releasing GPU memory between internal miner restarts?
Memleak when it fucks up. Then it restarts itself to hog more memory with the second copy of the DAG.
yes, definitely sounds like a memory leak to me.
grab some paper towels and check your motherboard/ram slots particularly, hopefully its not so bad that you are leaking underneath the rig too.
once i had stacked a couple rigs, like bunk beds you know.. so i could utilize the same 24" box fan for 14 gpu's.. and the top rig memory leaked all over the rig underneath it.. huge mess.
who would have thought all that fluid fits in such small semiconductors?
man i wish ram just ran on smoke like cpu's do..
May 22, 2017, 12:22:24 AM
The miner progressively shows/detects less and less memory for detected GPUs
When the miner starts it shows 8148 MB for each card, and it goes all the way down to 1000 MB per card. This can happen in an hour or in 12 hours. Stopping and restarting the miner fixes the problem.
OS: Ubuntu 16.04.1
AMD drivers: 16.30
All cards are ASUS ROG STRIX-RX480-8G-GAMING
Has anyone else experienced this?
@Claymore: Could it be that you are not releasing GPU memory between internal miner restarts?
When the miner starts it shows 8148 MB for each card, and it goes all the way down to 1000 MB per card. This can happen in an hour or in 12 hours. Stopping and restarting the miner fixes the problem.
OS: Ubuntu 16.04.1
AMD drivers: 16.30
All cards are ASUS ROG STRIX-RX480-8G-GAMING
Has anyone else experienced this?
@Claymore: Could it be that you are not releasing GPU memory between internal miner restarts?
May 21, 2017, 10:41:49 PM
Hi, I took Sia for second mining, who is the best? Decred/Siacoin/Lbry/Pascal???
May 21, 2017, 10:02:59 PM
Any one can help on why I get very low hash rate for dual mining vs using Nicehash GUI?
Claymore via nanopool reported:
ETH: 7-Mh/s, Sia - 950 Mh/s - 1K
If using Nicehash.
I get 28.2 mH/s as ongoing
Card: R9 290X on Win10
Claymore via nanopool reported:
ETH: 7-Mh/s, Sia - 950 Mh/s - 1K
If using Nicehash.
I get 28.2 mH/s as ongoing
Card: R9 290X on Win10
May 21, 2017, 09:37:57 PM
Can anyone confirm that 9.3 finds a blocks in SOLO ? 650 MH\s and 11 days still no block. Bad luck ?
Claymore miner is designed to mine on pools only. "Claymore' Solo" means ETH only, "Claymore' Duo" means ETH + another coin.
You have to check your earnings on the pool you are mining to. If you can share your config and bat files we might be able to point you to the right direction.
So what is this exemple on the first page ?
Quote
ethpool, ethermine (and Siacoin solo):
EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F.YourWorkerName -epsw x -dpool http://localhost:9980/miner/header -dcoin sia
EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F.YourWorkerName -epsw x -dpool http://localhost:9980/miner/header -dcoin sia
May 21, 2017, 09:26:59 PM
Hi guys,
I know NVIDIA cards are not ideal for eth mining but what should I expect from a gtx 1080? I have latest drivers (382.05) on win10 anniversary and I only get about 25 Mh/s even with oc.
I know NVIDIA cards are not ideal for eth mining but what should I expect from a gtx 1080? I have latest drivers (382.05) on win10 anniversary and I only get about 25 Mh/s even with oc.
May 21, 2017, 09:18:14 PM
Can anyone confirm that 9.3 finds a blocks in SOLO ? 650 MH\s and 11 days still no block. Bad luck ?
Claymore miner is designed to mine on pools only. "Claymore' Solo" means ETH only, "Claymore' Duo" means ETH + another coin.
You have to check your earnings on the pool you are mining to. If you can share your config and bat files we might be able to point you to the right direction.
May 21, 2017, 09:07:35 PM
This start.bat worked for me:
decred: EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x5161fd49e847f67455f1c8bb7abb36e985260d03.workerx -epsw x -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal riskyfire.workderx -dpsw x
This for sia: EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x5161fd49e847f67455f1c8bb7abb36e985260d03.workerx -epsw x -dpool "http://siamining.com:9980/miner/header?address=ef39c41494a746b2ebb1b063577c52e4b25e1a5e953d40777db9b25322b542c13e75a8cc56f0&worker=Workerx" -dcoin sc
When you use .bat file, then config fail is not important.
decred: EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x5161fd49e847f67455f1c8bb7abb36e985260d03.workerx -epsw x -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal riskyfire.workderx -dpsw x
This for sia: EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x5161fd49e847f67455f1c8bb7abb36e985260d03.workerx -epsw x -dpool "http://siamining.com:9980/miner/header?address=ef39c41494a746b2ebb1b063577c52e4b25e1a5e953d40777db9b25322b542c13e75a8cc56f0&worker=Workerx" -dcoin sc
When you use .bat file, then config fail is not important.
This one's mine
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1-etc.ethermine.org:4444 -ewal 0xccf35f5d3c9bd4c331571666ef0ec16115f97d01 -epsw x
-dpool stratum+tcp://sia-eu1.nanopool.org:7777 -dwal 781f0f00dd17ba92394edcfb428516eaf23e849cde9e404b76fe0f25421fa5b5f07b2dac8b72 -dpsw x -dcoin sc
I still get the same error message and no SIA speed. I commented everything out in the config file
Also, why does it say DCR (circled in the picture) instead of SIA?
-dcoin sia NOT sc
front page says sc not sia
-dcoin select second coin to mine in dual mode. Possible options are "-dcoin dcr", "-dcoin sc", "-dcoin lbc", "-dcoin pasc". Default value is "dcr".
Yes, I have it as SC and got it to work on siacoin pool. IDK what I did differently, but it works.
As for the person trying to solo mine SIA, you might actually try messing with the ETH pool, so it cannot connect. That way you might end up mining sia only. I have no idea if this idea has been presented before, but in theory it should work.
Let me know what the outcome is
May 21, 2017, 07:54:24 PM
is there a way to mine just sia or decred?... sia has blown up and i'm trying to figure out how to just mine sia with dual miner... just to see what i get.
I'm probably the hundreth person to answer this... nope.
i think the other 99 asked how to dual mine with sia... not sia alone.
uh, nope
May 21, 2017, 07:38:21 PM
is there a way to mine just sia or decred?... sia has blown up and i'm trying to figure out how to just mine sia with dual miner... just to see what i get.
I'm probably the hundreth person to answer this... nope.
i think the other 99 asked how to dual mine with sia... not sia alone.
May 21, 2017, 07:29:24 PM
is there a way to mine just sia or decred?... sia has blown up and i'm trying to figure out how to just mine sia with dual miner... just to see what i get.
May 21, 2017, 05:59:01 PM
This start.bat worked for me:
decred: EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x5161fd49e847f67455f1c8bb7abb36e985260d03.workerx -epsw x -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal riskyfire.workderx -dpsw x
This for sia: EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x5161fd49e847f67455f1c8bb7abb36e985260d03.workerx -epsw x -dpool "http://siamining.com:9980/miner/header?address=ef39c41494a746b2ebb1b063577c52e4b25e1a5e953d40777db9b25322b542c13e75a8cc56f0&worker=Workerx" -dcoin sc
When you use .bat file, then config fail is not important.
decred: EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x5161fd49e847f67455f1c8bb7abb36e985260d03.workerx -epsw x -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal riskyfire.workderx -dpsw x
This for sia: EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x5161fd49e847f67455f1c8bb7abb36e985260d03.workerx -epsw x -dpool "http://siamining.com:9980/miner/header?address=ef39c41494a746b2ebb1b063577c52e4b25e1a5e953d40777db9b25322b542c13e75a8cc56f0&worker=Workerx" -dcoin sc
When you use .bat file, then config fail is not important.
This one's mine
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1-etc.ethermine.org:4444 -ewal 0xccf35f5d3c9bd4c331571666ef0ec16115f97d01 -epsw x
-dpool stratum+tcp://sia-eu1.nanopool.org:7777 -dwal 781f0f00dd17ba92394edcfb428516eaf23e849cde9e404b76fe0f25421fa5b5f07b2dac8b72 -dpsw x -dcoin sc
I still get the same error message and no SIA speed. I commented everything out in the config file
Also, why does it say DCR (circled in the picture) instead of SIA?
-dcoin sia NOT sc
front page says sc not sia
-dcoin select second coin to mine in dual mode. Possible options are "-dcoin dcr", "-dcoin sc", "-dcoin lbc", "-dcoin pasc". Default value is "dcr".
May 21, 2017, 05:50:20 PM
This start.bat worked for me:
decred: EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x5161fd49e847f67455f1c8bb7abb36e985260d03.workerx -epsw x -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal riskyfire.workderx -dpsw x
This for sia: EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x5161fd49e847f67455f1c8bb7abb36e985260d03.workerx -epsw x -dpool "http://siamining.com:9980/miner/header?address=ef39c41494a746b2ebb1b063577c52e4b25e1a5e953d40777db9b25322b542c13e75a8cc56f0&worker=Workerx" -dcoin sc
When you use .bat file, then config fail is not important.
decred: EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x5161fd49e847f67455f1c8bb7abb36e985260d03.workerx -epsw x -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal riskyfire.workderx -dpsw x
This for sia: EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x5161fd49e847f67455f1c8bb7abb36e985260d03.workerx -epsw x -dpool "http://siamining.com:9980/miner/header?address=ef39c41494a746b2ebb1b063577c52e4b25e1a5e953d40777db9b25322b542c13e75a8cc56f0&worker=Workerx" -dcoin sc
When you use .bat file, then config fail is not important.
This one's mine
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1-etc.ethermine.org:4444 -ewal 0xccf35f5d3c9bd4c331571666ef0ec16115f97d01 -epsw x
-dpool stratum+tcp://sia-eu1.nanopool.org:7777 -dwal 781f0f00dd17ba92394edcfb428516eaf23e849cde9e404b76fe0f25421fa5b5f07b2dac8b72 -dpsw x -dcoin sc
I still get the same error message and no SIA speed. I commented everything out in the config file
Also, why does it say DCR (circled in the picture) instead of SIA?
-dcoin sia NOT sc
May 21, 2017, 05:32:06 PM
Cards have bios Mod
And Settings from the OS are
Core 1050 / Mem frequency 1930 / Powerstage 2 --> with simplemining.net as OS i hate Windows
And Settings from the OS are
Core 1050 / Mem frequency 1930 / Powerstage 2 --> with simplemining.net as OS i hate Windows
May 21, 2017, 04:52:51 PM
I'd love to know as well. Trying to get 14 GPUs to dual-mine in a stable way is quite a challenge... :p
May 21, 2017, 04:42:05 PM
Here are my live stats,
ETH: 05/21/17-23:25:30 - New job from europe.ethash-hub.miningpoolhub.com:20535
ETH - Total Speed: 165.462 Mh/s, Total Shares: 313, Rejected: 0, Time: 03:03
ETH: GPU0 27.629 Mh/s, GPU1 27.510 Mh/s, GPU2 27.632 Mh/s, GPU3 27.416 Mh/s, GPU4 27.630 Mh/s, GPU5 27.646 Mh/s
SC - Total Speed: 2481.934 Mh/s, Total Shares: 174, Rejected: 0
SC: GPU0 414.435 Mh/s, GPU1 412.646 Mh/s, GPU2 414.473 Mh/s, GPU3 411.238 Mh/s, GPU4 414.445 Mh/s, GPU5 414.697 Mh/s
i have 6 cards and the bios are moded. on the top, the GPU are undervolted and the memory are running on a higher speed...
ETH: 05/21/17-23:25:30 - New job from europe.ethash-hub.miningpoolhub.com:20535
ETH - Total Speed: 165.462 Mh/s, Total Shares: 313, Rejected: 0, Time: 03:03
ETH: GPU0 27.629 Mh/s, GPU1 27.510 Mh/s, GPU2 27.632 Mh/s, GPU3 27.416 Mh/s, GPU4 27.630 Mh/s, GPU5 27.646 Mh/s
SC - Total Speed: 2481.934 Mh/s, Total Shares: 174, Rejected: 0
SC: GPU0 414.435 Mh/s, GPU1 412.646 Mh/s, GPU2 414.473 Mh/s, GPU3 411.238 Mh/s, GPU4 414.445 Mh/s, GPU5 414.697 Mh/s
i have 6 cards and the bios are moded. on the top, the GPU are undervolted and the memory are running on a higher speed...
Can you let me know what settings your cards are running at?
May 21, 2017, 04:28:27 PM
Here are my live stats,
ETH: 05/21/17-23:25:30 - New job from europe.ethash-hub.miningpoolhub.com:20535
ETH - Total Speed: 165.462 Mh/s, Total Shares: 313, Rejected: 0, Time: 03:03
ETH: GPU0 27.629 Mh/s, GPU1 27.510 Mh/s, GPU2 27.632 Mh/s, GPU3 27.416 Mh/s, GPU4 27.630 Mh/s, GPU5 27.646 Mh/s
SC - Total Speed: 2481.934 Mh/s, Total Shares: 174, Rejected: 0
SC: GPU0 414.435 Mh/s, GPU1 412.646 Mh/s, GPU2 414.473 Mh/s, GPU3 411.238 Mh/s, GPU4 414.445 Mh/s, GPU5 414.697 Mh/s
i have 6 cards and the bios are moded. on the top, the GPU are undervolted and the memory are running on a higher speed...
ETH: 05/21/17-23:25:30 - New job from europe.ethash-hub.miningpoolhub.com:20535
ETH - Total Speed: 165.462 Mh/s, Total Shares: 313, Rejected: 0, Time: 03:03
ETH: GPU0 27.629 Mh/s, GPU1 27.510 Mh/s, GPU2 27.632 Mh/s, GPU3 27.416 Mh/s, GPU4 27.630 Mh/s, GPU5 27.646 Mh/s
SC - Total Speed: 2481.934 Mh/s, Total Shares: 174, Rejected: 0
SC: GPU0 414.435 Mh/s, GPU1 412.646 Mh/s, GPU2 414.473 Mh/s, GPU3 411.238 Mh/s, GPU4 414.445 Mh/s, GPU5 414.697 Mh/s
i have 6 cards and the bios are moded. on the top, the GPU are undervolted and the memory are running on a higher speed...
Jump to: