Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 913.

Ursul0

sr. member

Activity: 857

Merit: 262

Quote from: Claymore on April 29, 2017, 05:12:51 PM

Quote from: Ursul0 on April 29, 2017, 04:35:49 PM

Quote from: Claymore on April 29, 2017, 02:36:52 PM

Quote from: DevonMiner on April 29, 2017, 02:23:24 PM

Quote from: Claymore on April 29, 2017, 02:04:18 PM

v9.3:
- improved dual mining speed stability in ASM mode.
- added "-altnum" option for alternative GPU indexing.
- a few minor bug fixes and improvements.

Oh bugger ... just spent the last hour updating all my rigs to 9.2 ... LOL Cheesy

Thanks Claymore, not complaining!

Soon I will add ability to update miners on all rigs with EthMan so it will be easy.

That could be tricky... but interesting.

not sure if 9.3 is any better it still seems to need "-eqlim 288" form my 470s and still jumps around 0.3-1.3% of hash

EDIT: well maybe it has a notch higher speed than 9.2 ... like 0.2%

This is a bug of Linux drivers, it reports wrong number of CUs: https://community.amd.com/thread/207051
It seems this bug was finally fixed in 16.60 drivers, so you can try to use it and see if it works properly without -eqlim option.
If you cannot use 16.60, miner will fix 14->36, so it must work fine for RX480 (see the string "14 CUs is wrong, use 36" in the log). However, due to this bug there is no way to detect if you use RX480 or RX470, so for RX470 you should use "-eqlim 256" (32CUs * 8 ).

Win10 here. Also I tried 256 on v 9.2 after I tried 288 and for some reason I didn't like the result... now just using 288

EDIT: Seriously though, I just tested with no eqlim and with 256. Either you're missing something there or reported hash numbers are off somehow...
The best results consistently and without any doubt I'm getting with 288 - from 15 cards it maxes at 421.96 and stays 95% above 420 , while 256 or none never goes above 420.16 and hangs around 419 dropping to 414 (which it never does with 288)

EDIT2: well it does go down to 414 too occasionally (now I'm not sure if 9.2 did), but also sometimes to 422, while with 256 and no eqlim it never shows anything above 421.
Also it seems that the numbers in EthMan change kinda twice every update... looks a bit weird...

ETIT3: ohh... using 16.11.4

fuzion1

member

Activity: 111

Merit: 10

9.3 rocks claymore. My stale shares on 4 machines are down from 4% to 0-2%. Will install on the rest tomorrow.

Ursul0

sr. member

Activity: 857

Merit: 262

Quote from: Teress on April 29, 2017, 04:44:30 PM

For me 9.3 is jumping from 84 to 77 Mhs Sad

somethimes 77 four times in a row

on 470 I do tighter straps(1625-1500), manual volts (no offsets) on last stage 1080:1950-2000, both @ 850mv, dcri 23 (DCR) = smooth ride @ 28+MH/640+MH

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: Ursul0 on April 29, 2017, 04:35:49 PM

Quote from: Claymore on April 29, 2017, 02:36:52 PM

Quote from: DevonMiner on April 29, 2017, 02:23:24 PM

Quote from: Claymore on April 29, 2017, 02:04:18 PM

v9.3:
- improved dual mining speed stability in ASM mode.
- added "-altnum" option for alternative GPU indexing.
- a few minor bug fixes and improvements.

Oh bugger ... just spent the last hour updating all my rigs to 9.2 ... LOL Cheesy

Thanks Claymore, not complaining!

Soon I will add ability to update miners on all rigs with EthMan so it will be easy.

That could be tricky... but interesting.

not sure if 9.3 is any better it still seems to need "-eqlim 288" form my 470s and still jumps around 0.3-1.3% of hash

EDIT: well maybe it has a notch higher speed than 9.2 ... like 0.2%

This is a bug of Linux drivers, it reports wrong number of CUs: https://community.amd.com/thread/207051
It seems this bug was finally fixed in 16.60 drivers, so you can try to use it and see if it works properly without -eqlim option.
If you cannot use 16.60, miner will fix 14->36, so it must work fine for RX480 (see the string "14 CUs is wrong, use 36" in the log). However, due to this bug there is no way to detect if you use RX480 or RX470, so for RX470 you should use "-eqlim 256" (32CUs * 8 ).

fittsy

sr. member

Activity: 441

Merit: 252

Quote from: marvykkio on April 29, 2017, 02:38:24 PM

Slower than 9.1 and 9.2, and no speed improvement on etc only Cry

back 9.2 version

You need to use + to try different DCRI settings.

I was actually able to increase intensity and gain speed.

Ursul0

sr. member

Activity: 857

Merit: 262

Quote from: reflexmk on April 29, 2017, 04:38:06 PM

Quote from: Ursul0 on April 29, 2017, 04:35:49 PM

Quote from: Claymore on April 29, 2017, 02:36:52 PM

Quote from: DevonMiner on April 29, 2017, 02:23:24 PM

Quote from: Claymore on April 29, 2017, 02:04:18 PM

v9.3:
- improved dual mining speed stability in ASM mode.
- added "-altnum" option for alternative GPU indexing.
- a few minor bug fixes and improvements.

Oh bugger ... just spent the last hour updating all my rigs to 9.2 ... LOL Cheesy

Thanks Claymore, not complaining!

Soon I will add ability to update miners on all rigs with EthMan so it will be easy.

That could be tricky... but interesting.

not sure if 9.3 is any better it still seems to need "-eqlim 288" form my 470s and still jumps around 0.3-1.3% of hash

whats the number for 480? thanks

lol this is the one for 480

Teress

full member

Activity: 224

Merit: 102

Quote from: Ursul0 on April 29, 2017, 04:35:49 PM

Quote from: Claymore on April 29, 2017, 02:36:52 PM

Quote from: DevonMiner on April 29, 2017, 02:23:24 PM

Quote from: Claymore on April 29, 2017, 02:04:18 PM

v9.3:
- improved dual mining speed stability in ASM mode.
- added "-altnum" option for alternative GPU indexing.
- a few minor bug fixes and improvements.

Oh bugger ... just spent the last hour updating all my rigs to 9.2 ... LOL Cheesy

Thanks Claymore, not complaining!

Soon I will add ability to update miners on all rigs with EthMan so it will be easy.

That could be tricky... but interesting.

not sure if 9.3 is any better it still seems to need "-eqlim 288" form my 470s and still jumps around 0.3-1.3% of hash

For me 9.3 is jumping from 84 to 77 Mhs Sad

somethimes 77 four times in a row

reflexmk

sr. member

Activity: 289

Merit: 250

Quote from: Ursul0 on April 29, 2017, 04:35:49 PM

Quote from: Claymore on April 29, 2017, 02:36:52 PM

Quote from: DevonMiner on April 29, 2017, 02:23:24 PM

Quote from: Claymore on April 29, 2017, 02:04:18 PM

v9.3:
- improved dual mining speed stability in ASM mode.
- added "-altnum" option for alternative GPU indexing.
- a few minor bug fixes and improvements.

Oh bugger ... just spent the last hour updating all my rigs to 9.2 ... LOL Cheesy

Thanks Claymore, not complaining!

Soon I will add ability to update miners on all rigs with EthMan so it will be easy.

That could be tricky... but interesting.

not sure if 9.3 is any better it still seems to need "-eqlim 288" form my 470s and still jumps around 0.3-1.3% of hash

whats the number for 480? thanks

Ursul0

sr. member

Activity: 857

Merit: 262

Quote from: Claymore on April 29, 2017, 02:36:52 PM

Quote from: DevonMiner on April 29, 2017, 02:23:24 PM

Quote from: Claymore on April 29, 2017, 02:04:18 PM

v9.3:
- improved dual mining speed stability in ASM mode.
- added "-altnum" option for alternative GPU indexing.
- a few minor bug fixes and improvements.

Oh bugger ... just spent the last hour updating all my rigs to 9.2 ... LOL Cheesy

Thanks Claymore, not complaining!

Soon I will add ability to update miners on all rigs with EthMan so it will be easy.

That could be tricky... but interesting.

not sure if 9.3 is any better it still seems to need "-eqlim 288" form my 470s and still jumps around 0.3-1.3% of hash

EDIT: well maybe it has a notch higher speed than 9.2 ... like 0.2%

Ursul0

sr. member

Activity: 857

Merit: 262

Quote from: totikk on April 29, 2017, 03:03:04 PM

Quote from: Claymore

Soon I will add ability to update miners on all rigs with EthMan so it will be easy.

Hi! Claymore Two suggestion:
1) Can you add -login -pass? for connecting to rigs from EthMan, than no needed "-mport -3333"
2) Can you add possibility for connecting to rigs behind NAT ? Like EthMan_server on "main computer" and all rigs will connect there for providing monitoring\control...

one word - OpenVPN

unsoindovo

legendary

Activity: 1932

Merit: 1042

https://locktrip.com/?refId=40964

Quote from: unsoindovo on April 26, 2017, 03:43:51 AM

Quote from: PetrMiner on April 25, 2017, 03:51:52 PM

Quote from: unsoindovo on April 25, 2017, 02:17:00 PM

hi claymore...
i'm on win 10 pro 64 bit
drivers radeon-crimson-relive-17.4.3-minimalsetup-170417_web.exe
i have this issue with RX 470 nitro+ 4gb 4GB after flashing silent bios with an Anorack .rom

i read here:
http://www.overclock.net/t/1604567/polaris-bios-editing-rx5xx-rx4xx
it seems who with this crimson version the bios flash fallback problem, is already fixed...
do you think is not true???
i flash with this bios :
https://anorak.tech/uploads/default/original/1X/c57142ada8c575cac57f17b55042defbcd01ad8c.rom
https://anorak.tech/uploads/default/original/1X/36832d1374affe7936835c1c7c127b3973d59c2d.rom
https://anorak.tech/uploads/default/original/1X/2b19088985070fc0ad9adc1be67791743fa13532.rom
but the problem is everytime the same...

thank you very much for your help.

i fixed it:
i follow the tip to install 16.11.* drivers, after disinstal latest with DDU AMD utilily.. and now all works fine
thank you all..
now o get 27,6Mhs from 22,6Mhs

delle54

sr. member

Activity: 307

Merit: 250

Quote from: marvykkio on April 29, 2017, 02:38:24 PM

Slower than 9.1 and 9.2, and no speed improvement on etc only Cry

back 9.2 version

For me a bit faster with -dcri 8 on ETH only.

THX Claymore.

lpedretti

full member

Activity: 152

Merit: 100

ETH: 04/29/17-17:09:50 - New job from eth-us-east1.nanopool.org:9999
ETH - Total Speed: 117.170 Mh/s, Total Shares: 27, Rejected: 0, Time: 00:21
ETH: GPU0 29.127 Mh/s, GPU1 29.127 Mh/s, GPU2 29.789 Mh/s, GPU3 29.127 Mh/s
ETH: 04/29/17-17:09:53 - New job from eth-us-east1.nanopool.org:9999
ETH - Total Speed: 117.170 Mh/s, Total Shares: 27, Rejected: 0, Time: 00:21
ETH: GPU0 29.127 Mh/s, GPU1 29.789 Mh/s, GPU2 29.127 Mh/s, GPU3 29.127 Mh/s
Unhandled signal in divisionErrorHandler()
./singleeth-nano-br.sh: line 7: 1598 Aborted (core dumped)

Lubuntu 16.04.2 amd gpu-pro 17.10

Any ideas?

Thanx
Best regards!

totikk

newbie

Activity: 73

Merit: 0

Quote from: Claymore

Soon I will add ability to update miners on all rigs with EthMan so it will be easy.

Hi! Claymore Two suggestion:
1) Can you add -login -pass? for connecting to rigs from EthMan, than no needed "-mport -3333"
2) Can you add possibility for connecting to rigs behind NAT ? Like EthMan_server on "main computer" and all rigs will connect there for providing monitoring\control...

Vasyok55555

newbie

Activity: 12

Merit: 0

The GPU does not change the order of temperature. Version 9.3

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: marvykkio on April 29, 2017, 02:38:24 PM

Slower than 9.1 and 9.2, and no speed improvement on etc only Cry

back 9.2 version

It would be very useful to mention what GPU you use.

marvykkio

hero member

Activity: 798

Merit: 1000

Slower than 9.1 and 9.2, and no speed improvement on etc only Cry

back 9.2 version

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: DevonMiner on April 29, 2017, 02:23:24 PM

Quote from: Claymore on April 29, 2017, 02:04:18 PM

v9.3:
- improved dual mining speed stability in ASM mode.
- added "-altnum" option for alternative GPU indexing.
- a few minor bug fixes and improvements.

Oh bugger ... just spent the last hour updating all my rigs to 9.2 ... LOL Cheesy

Thanks Claymore, not complaining!

Soon I will add ability to update miners on all rigs with EthMan so it will be easy.

DevonMiner

sr. member

Activity: 471

Merit: 250

Quote from: Claymore on April 29, 2017, 02:04:18 PM

v9.3:

- improved dual mining speed stability in ASM mode.
- added "-altnum" option for alternative GPU indexing.
- a few minor bug fixes and improvements.

Oh bugger ... just spent the last hour updating all my rigs to 9.2 ... LOL Cheesy

Thanks Claymore, not complaining!

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

v9.3:

- improved dual mining speed stability in ASM mode.
- added "-altnum" option for alternative GPU indexing.
- a few minor bug fixes and improvements.

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 913. (Read 6590718 times)