After installing the creator update for Windows 10, i get the message “ethdcrminer64.exe has stopped working“. In the details it's called “bex64“ error. Anybody out there with similar problems or ideas how to solve this? The regular ethminer.exe is still working. Sgminer is also working as usual.
Any hints are appreciated!
Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 953. (Read 6590565 times)
April 14, 2017, 05:37:22 AM
April 14, 2017, 04:17:19 AM
Anyone have an experience with MSI Gaming Intel B250 LGA 1151,
I can get it to recognize 4 GPUS, but thats it. On it's viewer in the Bios is see's the others as plugged in, but in Windows I can't get them to be recognized.
I can get it to recognize 4 GPUS, but thats it. On it's viewer in the Bios is see's the others as plugged in, but in Windows I can't get them to be recognized.
MSI B250 boards need Windows 10 to be installed on disk with GPT boot sector not the standard MBR. Otherwise you just get a blank screen.
The bios needs to be adjusted in Advanced\PCI Subsystem Settings:
"PEG0 - Max Link Speed" = PCIE 2.0
"Above 4GB memory/Crypto Currency mining" = Enabled
I don't just get a blank screen though. It works with 3, I said 4 before but apparently that was just a 1 time fluke. I've tried the Gen 2 and Above 4gb memory and neither of them fix it either.
4 cards work without any settings
5+ cards need the bios settings and windows with GPT
April 14, 2017, 03:03:08 AM
u da man. cheers
April 14, 2017, 02:52:56 AM
Hello,
i have two rigs:
1. rig with 5 RX 480 8 GB sapphire nitro OC and today i add one 470 8gb. I make 177 mh, consuption is around 940 w/h( before it was 800w without rx470)
2. rig with 6 sapphire rx470 8 GB nitro OC with anoraks mode bios, i make 164 MHash, but consuption is around 920w/h, which is high if i compere with rig 1.
Do you think i can get less power for same hasrate?I mine only ethereum. I was looking on web page what to mine, but there is less power needed for a little less MH.
any advice? any custom rom suggestion,which is more power friendly
thank you for help
i have two rigs:
1. rig with 5 RX 480 8 GB sapphire nitro OC and today i add one 470 8gb. I make 177 mh, consuption is around 940 w/h( before it was 800w without rx470)
2. rig with 6 sapphire rx470 8 GB nitro OC with anoraks mode bios, i make 164 MHash, but consuption is around 920w/h, which is high if i compere with rig 1.
Do you think i can get less power for same hasrate?I mine only ethereum. I was looking on web page what to mine, but there is less power needed for a little less MH.
any advice? any custom rom suggestion,which is more power friendly
thank you for help
Ive got rig with 6 giga rx470 4 gb . 168 Mhz Eth only . 1195/2000 clocks, -95 mV AB settings. 860 Watt from the wall.
so i did a little testing yesterday, and i come to 169/170 MH with 6 rx 470 8gb, with around 770w at the wall. i used bios, which i found on the net, then i higher the memory clock to 2050(somewhere i saw, that i can get to 2100, but card was not stable at all,freezes, so i put 2050, and it is stable for 10hours), on trixx i lower voltege for -150mV, so in the end gpuz show 0.9V per card. which is much better then before (940w), but i think i can get a little more wattega down. with rx 480,which are at 1126/2150 is a little harder to lower voltage, but i came to 0.9V per card on GPUZ. all together i got 830w at the wall and around 179MH. today i will try to get better result today with some micro setting. we will see. (i need to,becouse my electric bill suprised me a little :S).
thank you all for help. i will also try to get better result, but i am totatly noobb on that (but i am learning,hehe).
also, i used claymore 7.4 until esterday. with 9.0 i get a little better result with rx 480, which are mining over 30 MH at DCR 10. (at defoult i got less mh). What dcr are you using, if you are mining only ethereum?
Do you use modded bios for 480 aswell? I cant get mine over 26MHs with 1300CC and 2200MC...
tnx
yes, i have moded bios, Gpu clock 1126 and memory clock 2150.
Is it a secret or can you please link it to me? tnx
no, it is not the secreat. i have sapphire rx 480 8gb nitro + OC (version 1-20 - samsung)...write in the google that card and add ethereum bios. and you will get the forum and user jukebox postet moded bios.
April 14, 2017, 02:48:33 AM
Hello,
i have two rigs:
1. rig with 5 RX 480 8 GB sapphire nitro OC and today i add one 470 8gb. I make 177 mh, consuption is around 940 w/h( before it was 800w without rx470)
2. rig with 6 sapphire rx470 8 GB nitro OC with anoraks mode bios, i make 164 MHash, but consuption is around 920w/h, which is high if i compere with rig 1.
Do you think i can get less power for same hasrate?I mine only ethereum. I was looking on web page what to mine, but there is less power needed for a little less MH.
any advice? any custom rom suggestion,which is more power friendly
thank you for help
i have two rigs:
1. rig with 5 RX 480 8 GB sapphire nitro OC and today i add one 470 8gb. I make 177 mh, consuption is around 940 w/h( before it was 800w without rx470)
2. rig with 6 sapphire rx470 8 GB nitro OC with anoraks mode bios, i make 164 MHash, but consuption is around 920w/h, which is high if i compere with rig 1.
Do you think i can get less power for same hasrate?I mine only ethereum. I was looking on web page what to mine, but there is less power needed for a little less MH.
any advice? any custom rom suggestion,which is more power friendly
thank you for help
Ive got rig with 6 giga rx470 4 gb . 168 Mhz Eth only . 1195/2000 clocks, -95 mV AB settings. 860 Watt from the wall.
so i did a little testing yesterday, and i come to 169/170 MH with 6 rx 470 8gb, with around 770w at the wall. i used bios, which i found on the net, then i higher the memory clock to 2050(somewhere i saw, that i can get to 2100, but card was not stable at all,freezes, so i put 2050, and it is stable for 10hours), on trixx i lower voltege for -150mV, so in the end gpuz show 0.9V per card. which is much better then before (940w), but i think i can get a little more wattega down. with rx 480,which are at 1126/2150 is a little harder to lower voltage, but i came to 0.9V per card on GPUZ. all together i got 830w at the wall and around 179MH. today i will try to get better result today with some micro setting. we will see. (i need to,becouse my electric bill suprised me a little :S).
thank you all for help. i will also try to get better result, but i am totatly noobb on that (but i am learning,hehe).
also, i used claymore 7.4 until esterday. with 9.0 i get a little better result with rx 480, which are mining over 30 MH at DCR 10. (at defoult i got less mh). What dcr are you using, if you are mining only ethereum?
Do you use modded bios for 480 aswell? I cant get mine over 26MHs with 1300CC and 2200MC...
tnx
yes, i have moded bios, Gpu clock 1126 and memory clock 2150.
Is it a secret or can you please link it to me? tnx
April 14, 2017, 02:43:53 AM
Hello,
i have two rigs:
1. rig with 5 RX 480 8 GB sapphire nitro OC and today i add one 470 8gb. I make 177 mh, consuption is around 940 w/h( before it was 800w without rx470)
2. rig with 6 sapphire rx470 8 GB nitro OC with anoraks mode bios, i make 164 MHash, but consuption is around 920w/h, which is high if i compere with rig 1.
Do you think i can get less power for same hasrate?I mine only ethereum. I was looking on web page what to mine, but there is less power needed for a little less MH.
any advice? any custom rom suggestion,which is more power friendly
thank you for help
i have two rigs:
1. rig with 5 RX 480 8 GB sapphire nitro OC and today i add one 470 8gb. I make 177 mh, consuption is around 940 w/h( before it was 800w without rx470)
2. rig with 6 sapphire rx470 8 GB nitro OC with anoraks mode bios, i make 164 MHash, but consuption is around 920w/h, which is high if i compere with rig 1.
Do you think i can get less power for same hasrate?I mine only ethereum. I was looking on web page what to mine, but there is less power needed for a little less MH.
any advice? any custom rom suggestion,which is more power friendly
thank you for help
Ive got rig with 6 giga rx470 4 gb . 168 Mhz Eth only . 1195/2000 clocks, -95 mV AB settings. 860 Watt from the wall.
so i did a little testing yesterday, and i come to 169/170 MH with 6 rx 470 8gb, with around 770w at the wall. i used bios, which i found on the net, then i higher the memory clock to 2050(somewhere i saw, that i can get to 2100, but card was not stable at all,freezes, so i put 2050, and it is stable for 10hours), on trixx i lower voltege for -150mV, so in the end gpuz show 0.9V per card. which is much better then before (940w), but i think i can get a little more wattega down. with rx 480,which are at 1126/2150 is a little harder to lower voltage, but i came to 0.9V per card on GPUZ. all together i got 830w at the wall and around 179MH. today i will try to get better result today with some micro setting. we will see. (i need to,becouse my electric bill suprised me a little :S).
thank you all for help. i will also try to get better result, but i am totatly noobb on that (but i am learning,hehe).
also, i used claymore 7.4 until esterday. with 9.0 i get a little better result with rx 480, which are mining over 30 MH at DCR 10. (at defoult i got less mh). What dcr are you using, if you are mining only ethereum?
Do you use modded bios for 480 aswell? I cant get mine over 26MHs with 1300CC and 2200MC...
tnx
yes, i have moded bios, Gpu clock 1126 and memory clock 2150.
April 14, 2017, 02:41:15 AM
Hello,
i have two rigs:
1. rig with 5 RX 480 8 GB sapphire nitro OC and today i add one 470 8gb. I make 177 mh, consuption is around 940 w/h( before it was 800w without rx470)
2. rig with 6 sapphire rx470 8 GB nitro OC with anoraks mode bios, i make 164 MHash, but consuption is around 920w/h, which is high if i compere with rig 1.
Do you think i can get less power for same hasrate?I mine only ethereum. I was looking on web page what to mine, but there is less power needed for a little less MH.
any advice? any custom rom suggestion,which is more power friendly
thank you for help
i have two rigs:
1. rig with 5 RX 480 8 GB sapphire nitro OC and today i add one 470 8gb. I make 177 mh, consuption is around 940 w/h( before it was 800w without rx470)
2. rig with 6 sapphire rx470 8 GB nitro OC with anoraks mode bios, i make 164 MHash, but consuption is around 920w/h, which is high if i compere with rig 1.
Do you think i can get less power for same hasrate?I mine only ethereum. I was looking on web page what to mine, but there is less power needed for a little less MH.
any advice? any custom rom suggestion,which is more power friendly
thank you for help
Ive got rig with 6 giga rx470 4 gb . 168 Mhz Eth only . 1195/2000 clocks, -95 mV AB settings. 860 Watt from the wall.
so i did a little testing yesterday, and i come to 169/170 MH with 6 rx 470 8gb, with around 770w at the wall. i used bios, which i found on the net, then i higher the memory clock to 2050(somewhere i saw, that i can get to 2100, but card was not stable at all,freezes, so i put 2050, and it is stable for 10hours), on trixx i lower voltege for -150mV, so in the end gpuz show 0.9V per card. which is much better then before (940w), but i think i can get a little more wattega down. with rx 480,which are at 1126/2150 is a little harder to lower voltage, but i came to 0.9V per card on GPUZ. all together i got 830w at the wall and around 179MH. today i will try to get better result today with some micro setting. we will see. (i need to,becouse my electric bill suprised me a little :S).
thank you all for help. i will also try to get better result, but i am totatly noobb on that (but i am learning,hehe).
also, i used claymore 7.4 until esterday. with 9.0 i get a little better result with rx 480, which are mining over 30 MH at DCR 10. (at defoult i got less mh). What dcr are you using, if you are mining only ethereum?
Do you use modded bios for 480 aswell? I cant get mine over 26MHs with 1300CC and 2200MC...
tnx
April 14, 2017, 02:19:39 AM
Hello,
i have two rigs:
1. rig with 5 RX 480 8 GB sapphire nitro OC and today i add one 470 8gb. I make 177 mh, consuption is around 940 w/h( before it was 800w without rx470)
2. rig with 6 sapphire rx470 8 GB nitro OC with anoraks mode bios, i make 164 MHash, but consuption is around 920w/h, which is high if i compere with rig 1.
Do you think i can get less power for same hasrate?I mine only ethereum. I was looking on web page what to mine, but there is less power needed for a little less MH.
any advice? any custom rom suggestion,which is more power friendly
thank you for help
i have two rigs:
1. rig with 5 RX 480 8 GB sapphire nitro OC and today i add one 470 8gb. I make 177 mh, consuption is around 940 w/h( before it was 800w without rx470)
2. rig with 6 sapphire rx470 8 GB nitro OC with anoraks mode bios, i make 164 MHash, but consuption is around 920w/h, which is high if i compere with rig 1.
Do you think i can get less power for same hasrate?I mine only ethereum. I was looking on web page what to mine, but there is less power needed for a little less MH.
any advice? any custom rom suggestion,which is more power friendly
thank you for help
Ive got rig with 6 giga rx470 4 gb . 168 Mhz Eth only . 1195/2000 clocks, -95 mV AB settings. 860 Watt from the wall.
so i did a little testing yesterday, and i come to 169/170 MH with 6 rx 470 8gb, with around 770w at the wall. i used bios, which i found on the net, then i higher the memory clock to 2050(somewhere i saw, that i can get to 2100, but card was not stable at all,freezes, so i put 2050, and it is stable for 10hours), on trixx i lower voltege for -150mV, so in the end gpuz show 0.9V per card. which is much better then before (940w), but i think i can get a little more wattega down. with rx 480,which are at 1126/2150 is a little harder to lower voltage, but i came to 0.9V per card on GPUZ. all together i got 830w at the wall and around 179MH. today i will try to get better result today with some micro setting. we will see. (i need to,becouse my electric bill suprised me a little :S).
thank you all for help. i will also try to get better result, but i am totatly noobb on that (but i am learning,hehe).
also, i used claymore 7.4 until esterday. with 9.0 i get a little better result with rx 480, which are mining over 30 MH at DCR 10. (at defoult i got less mh). What dcr are you using, if you are mining only ethereum?
April 13, 2017, 10:40:09 PM
Hello Claymore miners...
Has anyone successfully tried mining Expanse (EXP) on miningpoolhub?
I use this bat:
EthDcrMiner64.exe --mode 1 -epool asia1.expanse.miningpoolhub.com:20566 -ewal USERNAME.WORKERNAME -epsw x --etht 100 -allcoins exp -allpools 1 -ttli 80 -tstop 90
and it connects and starts mining, but it seems to mostly reject shares. Is this normal for expanse mining for some reason? In the first few minutes of mining I had 1 accepted share and about 10 rejected shares, so I stopped it and just went back to mining ZEC with that rig.
Has anyone successfully tried mining Expanse (EXP) on miningpoolhub?
I use this bat:
EthDcrMiner64.exe --mode 1 -epool asia1.expanse.miningpoolhub.com:20566 -ewal USERNAME.WORKERNAME -epsw x --etht 100 -allcoins exp -allpools 1 -ttli 80 -tstop 90
and it connects and starts mining, but it seems to mostly reject shares. Is this normal for expanse mining for some reason? In the first few minutes of mining I had 1 accepted share and about 10 rejected shares, so I stopped it and just went back to mining ZEC with that rig.
April 13, 2017, 10:17:47 PM
I can't seem to make it work with NiceHash. Does anyone have any ideas?
-di 0 -epool stratum+tcp://daggerhashimoto.usa.nicehash.com:3353 -ewal blah -epsw x -esm 3 -allpools 1 -estale 0 -dpool stratum+tcp://decred.usa.nicehash.com:3354 -dwal blah
21:01:27:428 c10 checkread timeout
21:01:27:528 d54 checkread timeout
21:01:32:444 c10 checkread timeout
21:01:32:545 d54 checkread timeout
21:01:37:467 c10 checkread timeout
21:01:37:567 d54 checkread timeout
21:01:41:612 c10 socket was closed remotely
21:01:41:612 c10 ETH: Job timeout, disconnect, retry in 20 sec...
21:01:41:712 d54 socket was closed remotely
21:01:41:712 d54 DCR: Job timeout, disconnect, retry in 20 sec...
-di 0 -epool stratum+tcp://daggerhashimoto.usa.nicehash.com:3353 -ewal blah -epsw x -esm 3 -allpools 1 -estale 0 -dpool stratum+tcp://decred.usa.nicehash.com:3354 -dwal blah
21:01:27:428 c10 checkread timeout
21:01:27:528 d54 checkread timeout
21:01:32:444 c10 checkread timeout
21:01:32:545 d54 checkread timeout
21:01:37:467 c10 checkread timeout
21:01:37:567 d54 checkread timeout
21:01:41:612 c10 socket was closed remotely
21:01:41:612 c10 ETH: Job timeout, disconnect, retry in 20 sec...
21:01:41:712 d54 socket was closed remotely
21:01:41:712 d54 DCR: Job timeout, disconnect, retry in 20 sec...
Are you using nicehash GUI or bat file ?
April 13, 2017, 10:08:04 PM
I can't seem to make it work with NiceHash. Does anyone have any ideas?
-di 0 -epool stratum+tcp://daggerhashimoto.usa.nicehash.com:3353 -ewal blah -epsw x -esm 3 -allpools 1 -estale 0 -dpool stratum+tcp://decred.usa.nicehash.com:3354 -dwal blah
21:01:27:428 c10 checkread timeout
21:01:27:528 d54 checkread timeout
21:01:32:444 c10 checkread timeout
21:01:32:545 d54 checkread timeout
21:01:37:467 c10 checkread timeout
21:01:37:567 d54 checkread timeout
21:01:41:612 c10 socket was closed remotely
21:01:41:612 c10 ETH: Job timeout, disconnect, retry in 20 sec...
21:01:41:712 d54 socket was closed remotely
21:01:41:712 d54 DCR: Job timeout, disconnect, retry in 20 sec...
-di 0 -epool stratum+tcp://daggerhashimoto.usa.nicehash.com:3353 -ewal blah -epsw x -esm 3 -allpools 1 -estale 0 -dpool stratum+tcp://decred.usa.nicehash.com:3354 -dwal blah
21:01:27:428 c10 checkread timeout
21:01:27:528 d54 checkread timeout
21:01:32:444 c10 checkread timeout
21:01:32:545 d54 checkread timeout
21:01:37:467 c10 checkread timeout
21:01:37:567 d54 checkread timeout
21:01:41:612 c10 socket was closed remotely
21:01:41:612 c10 ETH: Job timeout, disconnect, retry in 20 sec...
21:01:41:712 d54 socket was closed remotely
21:01:41:712 d54 DCR: Job timeout, disconnect, retry in 20 sec...
April 13, 2017, 09:43:25 PM
Anyone have an experience with MSI Gaming Intel B250 LGA 1151,
I can get it to recognize 4 GPUS, but thats it. On it's viewer in the Bios is see's the others as plugged in, but in Windows I can't get them to be recognized.
I can get it to recognize 4 GPUS, but thats it. On it's viewer in the Bios is see's the others as plugged in, but in Windows I can't get them to be recognized.
MSI B250 boards need Windows 10 to be installed on disk with GPT boot sector not the standard MBR. Otherwise you just get a blank screen.
The bios needs to be adjusted in Advanced\PCI Subsystem Settings:
"PEG0 - Max Link Speed" = PCIE 2.0
"Above 4GB memory/Crypto Currency mining" = Enabled
I don't just get a blank screen though. It works with 3, I said 4 before but apparently that was just a 1 time fluke. I've tried the Gen 2 and Above 4gb memory and neither of them fix it either.
April 13, 2017, 04:24:34 PM
And cannot be closed.
Not even end task in task bar would be able to close it.
Only in 1 rig and only for claymore run through multipoolhubminer
What happen is multipoolhubminer will try to open another claymore with the same problem
https://i.stack.imgur.com/BbDvj.png
It basically stuck at the initial stage
Restarting the rig works.
But kind of a pain. Also if it happens in the middle of the night I am screwed.
It's always at the initial stage. Happens very rarely. However, the way multipoolhub did is that it sometimes restart the whole thing.
I am using 16.9.1 because it's the only driver that doesn't require bios check.
Not even end task in task bar would be able to close it.
Only in 1 rig and only for claymore run through multipoolhubminer
What happen is multipoolhubminer will try to open another claymore with the same problem
https://i.stack.imgur.com/BbDvj.png
It basically stuck at the initial stage
Restarting the rig works.
But kind of a pain. Also if it happens in the middle of the night I am screwed.
It's always at the initial stage. Happens very rarely. However, the way multipoolhub did is that it sometimes restart the whole thing.
I am using 16.9.1 because it's the only driver that doesn't require bios check.
- use DDU to uninstall 16.9.1
- install 16.11.5
- install Claymore 9.0, use -asm 0 first
- do not overlclock
- match the required power with no more than 80% of the limit of your PSU
- do not use multipoolhub
Once stable you can mod parameters one by one
Man, you provided info and asked for advice. It was given. Try it before questioning integrity. At least try to google for a minute...
Thanks for the advice.
May I know who you are? I mean are you familiar with claymore, and stuff?
I have the same thing, but I want to use a new miner asm 1. Problem during the restart. You need to fix the errors !!!
April 13, 2017, 04:14:10 PM
Anyone have an experience with MSI Gaming Intel B250 LGA 1151,
I can get it to recognize 4 GPUS, but thats it. On it's viewer in the Bios is see's the others as plugged in, but in Windows I can't get them to be recognized.
I can get it to recognize 4 GPUS, but thats it. On it's viewer in the Bios is see's the others as plugged in, but in Windows I can't get them to be recognized.
MSI B250 boards need Windows 10 to be installed on disk with GPT boot sector not the standard MBR. Otherwise you just get a blank screen.
The bios needs to be adjusted in Advanced\PCI Subsystem Settings:
"PEG0 - Max Link Speed" = PCIE 2.0
"Above 4GB memory/Crypto Currency mining" = Enabled
April 13, 2017, 02:53:36 PM
Hi guys!
Which motherboard is good for a rig with 7 gpus?
I see some from Asus that have 7 PCI-slots.
Any advises?
Which motherboard is good for a rig with 7 gpus?
I see some from Asus that have 7 PCI-slots.
Any advises?
April 13, 2017, 02:51:39 PM
Damn claymore making lots
https://ethermine.org/miners/B9cF2dA90Bdff1BC014720Cc84F5Ab99d7974EbA
I should change my profession to miner developer
https://ethermine.org/miners/B9cF2dA90Bdff1BC014720Cc84F5Ab99d7974EbA
I should change my profession to miner developer
12BTC per month, neat.
I guess we could learn some C, but noone needs another miner really
That's only one account.
I think he get 0.1-0.5% of the ZEC every day.
April 13, 2017, 02:14:06 PM
Damn claymore making lots
https://ethermine.org/miners/B9cF2dA90Bdff1BC014720Cc84F5Ab99d7974EbA
I should change my profession to miner developer
https://ethermine.org/miners/B9cF2dA90Bdff1BC014720Cc84F5Ab99d7974EbA
I should change my profession to miner developer
12BTC per month, neat.
I guess we could learn some C, but noone needs another miner really
That's only one account.
April 13, 2017, 12:59:37 PM
Damn claymore making lots
https://ethermine.org/miners/B9cF2dA90Bdff1BC014720Cc84F5Ab99d7974EbA
I should change my profession to miner developer
https://ethermine.org/miners/B9cF2dA90Bdff1BC014720Cc84F5Ab99d7974EbA
I should change my profession to miner developer
12BTC per month, neat.
I guess we could learn some C, but noone needs another miner really
April 13, 2017, 10:47:28 AM
Damn claymore making lots
https://ethermine.org/miners/B9cF2dA90Bdff1BC014720Cc84F5Ab99d7974EbA
I should change my profession to miner developer
https://ethermine.org/miners/B9cF2dA90Bdff1BC014720Cc84F5Ab99d7974EbA
I should change my profession to miner developer
April 13, 2017, 10:44:21 AM
And cannot be closed.
Not even end task in task bar would be able to close it.
Only in 1 rig and only for claymore run through multipoolhubminer
What happen is multipoolhubminer will try to open another claymore with the same problem
It basically stuck at the initial stage
Restarting the rig works.
But kind of a pain. Also if it happens in the middle of the night I am screwed.
It's always at the initial stage. Happens very rarely. However, the way multipoolhub did is that it sometimes restart the whole thing.
I am using 16.9.1 because it's the only driver that doesn't require bios check.
Not even end task in task bar would be able to close it.
Only in 1 rig and only for claymore run through multipoolhubminer
What happen is multipoolhubminer will try to open another claymore with the same problem
It basically stuck at the initial stage
Restarting the rig works.
But kind of a pain. Also if it happens in the middle of the night I am screwed.
It's always at the initial stage. Happens very rarely. However, the way multipoolhub did is that it sometimes restart the whole thing.
I am using 16.9.1 because it's the only driver that doesn't require bios check.
- use DDU to uninstall 16.9.1
- install 16.11.5
- install Claymore 9.0, use -asm 0 first
- do not overlclock
- match the required power with no more than 80% of the limit of your PSU
- do not use multipoolhub
Once stable you can mod parameters one by one
Man, you provided info and asked for advice. It was given. Try it before questioning integrity. At least try to google for a minute...
Thanks for the advice.
May I know who you are? I mean are you familiar with claymore, and stuff?
Jump to: