> server: bind failed with error
Check "FAQ" section in first post of this thread.
Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 949. (Read 6590718 times)
April 15, 2017, 10:29:48 AM
April 15, 2017, 10:27:38 AM
im have same problem
you can help me ?
you can help me ?
Hello.
Great work Claymore.
But one question...
Version 4.1 works without problems for me and looks very stable. But 4.3 crash most times after hour (I was start using parameter -r 20 -gser 2 and -mport 3333 from this version) . And version 4.4 drops hashrate from 167MH to 33MH or less and give me this error:
server: bind failed with error: 10048, next attempt in 10sec...
Where can be problem ?
Thank you.
I can send all logs somewhere..
Great work Claymore.
But one question...
Version 4.1 works without problems for me and looks very stable. But 4.3 crash most times after hour (I was start using parameter -r 20 -gser 2 and -mport 3333 from this version) . And version 4.4 drops hashrate from 167MH to 33MH or less and give me this error:
server: bind failed with error: 10048, next attempt in 10sec...
Where can be problem ?
Thank you.
I can send all logs somewhere..
April 15, 2017, 10:18:03 AM
im do this but im hve a error
see my two lines
First
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x4FAd3e68CEc96AfbB0457B17A46fF6896EB57E40 -esm 0 -di 1 -allpools 0 -r 1
Second
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-us-east1.nanopool.org:9999 -ewal 0x4FAd3e68CEc96AfbB0457B17A46fF6896EB57E40/WORKER1/[email protected] -esm 0 -di 0 -allpools 0 -r 1
this is the error when im open the second gpu with the second pool
ETH - Total Speed: 26.009 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:01
ETH: GPU0 26.009 Mh/s
server: bind failed with error: 10048, next attempt in 10sec...
server: bind failed with error: 10048, next attempt in 10sec...
ETH: 04/15/17-12:15:54 - New job from eth-us-east1.nanopool.org:9999
ETH - Total Speed: 26.069 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:01
ETH: GPU0 26.069 Mh/s
server: bind failed with error: 10048, next attempt in 10sec...
server: bind failed with error: 10048, next attempt in 10sec...
ETH: 04/15/17-12:16:11 - SHARE FOUND - (GPU 0)
ETH: 04/15/17-12:16:11 - SHARE FOUND - (GPU 0)
server: bind failed with error: 10048, next attempt in 10
Look at the -di parameter on the first post, it explains how it works.., -di 0 for example.
see my two lines
First
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x4FAd3e68CEc96AfbB0457B17A46fF6896EB57E40 -esm 0 -di 1 -allpools 0 -r 1
Second
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-us-east1.nanopool.org:9999 -ewal 0x4FAd3e68CEc96AfbB0457B17A46fF6896EB57E40/WORKER1/[email protected] -esm 0 -di 0 -allpools 0 -r 1
this is the error when im open the second gpu with the second pool
ETH - Total Speed: 26.009 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:01
ETH: GPU0 26.009 Mh/s
server: bind failed with error: 10048, next attempt in 10sec...
server: bind failed with error: 10048, next attempt in 10sec...
ETH: 04/15/17-12:15:54 - New job from eth-us-east1.nanopool.org:9999
ETH - Total Speed: 26.069 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:01
ETH: GPU0 26.069 Mh/s
server: bind failed with error: 10048, next attempt in 10sec...
server: bind failed with error: 10048, next attempt in 10sec...
ETH: 04/15/17-12:16:11 - SHARE FOUND - (GPU 0)
ETH: 04/15/17-12:16:11 - SHARE FOUND - (GPU 0)
server: bind failed with error: 10048, next attempt in 10
Dear Friends
What parameter do I use to specify the video card I want to use?
Because I just want to use the "GPU 0"
Thanks
Almir Fiorio
What parameter do I use to specify the video card I want to use?
Because I just want to use the "GPU 0"
Thanks
Almir Fiorio
Look at the -di parameter on the first post, it explains how it works.., -di 0 for example.
April 15, 2017, 10:17:01 AM
v9.1:
- added assembler kernels for ETH+SIA and ETH+PASCAL modes (major speedup for SIA and PASCAL).
- added alternative assembler kernels for Tonga and Polaris cards for ETH-only mode. Use them if you get best speed at "-dcri 1" (i.e. you cannot find speed peak), use "-asm 2" option to enable this mode.
- a few minor bug fixes and improvements.
- added assembler kernels for ETH+SIA and ETH+PASCAL modes (major speedup for SIA and PASCAL).
- added alternative assembler kernels for Tonga and Polaris cards for ETH-only mode. Use them if you get best speed at "-dcri 1" (i.e. you cannot find speed peak), use "-asm 2" option to enable this mode.
- a few minor bug fixes and improvements.
April 15, 2017, 10:11:23 AM
I have a rig with 6 RX 480
What should driver should I use?
Sometimes I mine ethash (ethereum). Sometimes I mine equihash (zcash).
Obviously I can't change driver everytime I switch.
What driver should I use that's best for both?
Where can I download both of your miner? I didn't see windows version of the miner in drive link.
What should driver should I use?
Sometimes I mine ethash (ethereum). Sometimes I mine equihash (zcash).
Obviously I can't change driver everytime I switch.
What driver should I use that's best for both?
Where can I download both of your miner? I didn't see windows version of the miner in drive link.
I use 16.9.2....believe me I've spent hours trying many drivers.
I love it because I don't have to patch or bypass signature check
The thing is sometimes claymore miner just stuck in the beginning.
It recognizes all cards and that's it. It happens if I lower voltage too much.
Have you done any comparisons vs 16.12.1 / 16.12.2? I ram running 16.12.2... it does require patching which is an extra step but maybe worth it?
April 15, 2017, 10:03:08 AM
Dear Friends
What parameter do I use to specify the video card I want to use?
Because I just want to use the "GPU 0"
Thanks
Almir Fiorio
What parameter do I use to specify the video card I want to use?
Because I just want to use the "GPU 0"
Thanks
Almir Fiorio
Look at the -di parameter on the first post, it explains how it works.., -di 0 for example.
April 15, 2017, 10:01:13 AM
Dear Friends
What parameter do I use to specify the video card I want to use?
Because I just want to use the "GPU 0"
Thanks
Almir Fiorio
What parameter do I use to specify the video card I want to use?
Because I just want to use the "GPU 0"
Thanks
Almir Fiorio
April 15, 2017, 09:30:36 AM
I have a rig with 6 RX 480
What should driver should I use?
Sometimes I mine ethash (ethereum). Sometimes I mine equihash (zcash).
Obviously I can't change driver everytime I switch.
What driver should I use that's best for both?
Where can I download both of your miner? I didn't see windows version of the miner in drive link.
What should driver should I use?
Sometimes I mine ethash (ethereum). Sometimes I mine equihash (zcash).
Obviously I can't change driver everytime I switch.
What driver should I use that's best for both?
Where can I download both of your miner? I didn't see windows version of the miner in drive link.
I use 16.9.2....believe me I've spent hours trying many drivers.
I love it because I don't have to patch or bypass signature check
The thing is sometimes claymore miner just stuck in the beginning.
It recognizes all cards and that's it. It happens if I lower voltage too much.
April 15, 2017, 08:51:43 AM
One little question.
Since I started using my PC to mine while I'm not playing, would a custom rom have any downsides for gaming?
Since I started using my PC to mine while I'm not playing, would a custom rom have any downsides for gaming?
The answer is no. They are faster.
April 15, 2017, 08:15:24 AM
If you use Claymore miner, try my IOS app to monitor miner.
https://itunes.apple.com/vn/app/clays-more-monitor/id1225812443?mt=8
https://itunes.apple.com/vn/app/clays-more-monitor/id1225812443?mt=8
Shit this is awesome.... Is there something like this for Android?
April 15, 2017, 08:13:07 AM
I have a rig with 6 RX 480
What should driver should I use?
Sometimes I mine ethash (ethereum). Sometimes I mine equihash (zcash).
Obviously I can't change driver everytime I switch.
What driver should I use that's best for both?
Where can I download both of your miner? I didn't see windows version of the miner in drive link.
What should driver should I use?
Sometimes I mine ethash (ethereum). Sometimes I mine equihash (zcash).
Obviously I can't change driver everytime I switch.
What driver should I use that's best for both?
Where can I download both of your miner? I didn't see windows version of the miner in drive link.
I use 16.9.2....believe me I've spent hours trying many drivers.
April 15, 2017, 07:18:52 AM
I have a rig with 6 RX 480
What should driver should I use?
Sometimes I mine ethash (ethereum). Sometimes I mine equihash (zcash).
Obviously I can't change driver everytime I switch.
What driver should I use that's best for both?
Where can I download both of your miner? I didn't see windows version of the miner in drive link.
What should driver should I use?
Sometimes I mine ethash (ethereum). Sometimes I mine equihash (zcash).
Obviously I can't change driver everytime I switch.
What driver should I use that's best for both?
Where can I download both of your miner? I didn't see windows version of the miner in drive link.
April 15, 2017, 07:18:39 AM
If you use Claymore miner, try my IOS app to monitor miner.
https://itunes.apple.com/vn/app/clays-more-monitor/id1225812443?mt=8
Not bad try, but shows only ETH hashrate, not dual mining DCR etc... Also second server is not showing maybe due to long length...https://itunes.apple.com/vn/app/clays-more-monitor/id1225812443?mt=8
Time - it is not clear if it shows minutes or hours...
Can it display any notification when miner goes offline or temperature is too hot?
"Set time" you have "munites" instead of minutes
April 15, 2017, 07:13:25 AM
If you use Claymore miner, try my IOS app to monitor miner.
https://itunes.apple.com/vn/app/clays-more-monitor/id1225812443?mt=8
http://i1124.photobucket.com/albums/l565/MrHoanglee/11_zps0tcp6lpd.jpg
https://itunes.apple.com/vn/app/clays-more-monitor/id1225812443?mt=8
http://i1124.photobucket.com/albums/l565/MrHoanglee/11_zps0tcp6lpd.jpg
April 15, 2017, 06:46:09 AM
Hello all, and thanks Claymore for new miner version!
Though, I have a problem and hopefully one can help me about that.
I got several rigs of 3x470, 4x470 (4 GB) and 4x470 (8 GB) videocards.
After updating the Claymore ETH from 7.4 version to 9.0 I got a strange problem.
Decred increased *2, that's a fact, but hashrate of both ETH and DCR became floating. Usually my cards give 21 or 24 Mh/s (nothing is overclocked/modded, all stock) depending on whether its Asus strix 4gb or Sapphire nitro 8gb, but now once in several seconds one or two cards in the rig drops hashrate to 17-18 mh/s on eth and to 400 mhs (instead of usual 600 mhs) on dcr.
Though, I have a problem and hopefully one can help me about that.
I got several rigs of 3x470, 4x470 (4 GB) and 4x470 (8 GB) videocards.
After updating the Claymore ETH from 7.4 version to 9.0 I got a strange problem.
Decred increased *2, that's a fact, but hashrate of both ETH and DCR became floating. Usually my cards give 21 or 24 Mh/s (nothing is overclocked/modded, all stock) depending on whether its Asus strix 4gb or Sapphire nitro 8gb, but now once in several seconds one or two cards in the rig drops hashrate to 17-18 mh/s on eth and to 400 mhs (instead of usual 600 mhs) on dcr.
Added to OP:
- AMD cards: On some Polaris cards you can notice non-constant mining speeds in dual mode when ASM mode is used; you can also see in GPU-Z that memory controller load is not constant, it drops for a few seconds.
This issue is related to hardware and I cannot find any good workaround for now. Try to increase "-dcri" value a bit, it will reduce ETH speed a bit, but speeds will be much more stable.
April 15, 2017, 06:41:28 AM
I apologize if this has been asked before (probably has). On dual mining Claymore software like ETH/SIA (for example), if one of my miners has 6 cards, with 2 dual mining and 4 single mining, how will I be charged? Will I be charged 2% on all six? Or will I be charged 2% on two and 1% on four? Thanks for your reply and patience with any redundant questions.
Added to OP (FAQ section):
As soon as you enable dual mining, devfee is 2% for all cards. But you can start two miner instances and split cards between them to get 1% on first instance and 2% on second.
April 15, 2017, 06:23:46 AM
I apologize if this has been asked before (probably has). On dual mining Claymore software like ETH/SIA (for example), if one of my miners has 6 cards, with 2 dual mining and 4 single mining, how will I be charged? Will I be charged 2% on all six? Or will I be charged 2% on two and 1% on four? Thanks for your reply and patience with any redundant questions.
April 15, 2017, 05:12:24 AM
Hello all, and thanks Claymore for new miner version!
Though, I have a problem and hopefully one can help me about that.
I got several rigs of 3x470, 4x470 (4 GB) and 4x470 (8 GB) videocards.
After updating the Claymore ETH from 7.4 version to 9.0 I got a strange problem.
Decred increased *2, that's a fact, but hashrate of both ETH and DCR became floating. Usually my cards give 21 or 24 Mh/s (nothing is overclocked/modded, all stock) depending on whether its Asus strix 4gb or Sapphire nitro 8gb, but now once in several seconds one or two cards in the rig drops hashrate to 17-18 mh/s on eth and to 400 mhs (instead of usual 600 mhs) on dcr.
Though, I have a problem and hopefully one can help me about that.
I got several rigs of 3x470, 4x470 (4 GB) and 4x470 (8 GB) videocards.
After updating the Claymore ETH from 7.4 version to 9.0 I got a strange problem.
Decred increased *2, that's a fact, but hashrate of both ETH and DCR became floating. Usually my cards give 21 or 24 Mh/s (nothing is overclocked/modded, all stock) depending on whether its Asus strix 4gb or Sapphire nitro 8gb, but now once in several seconds one or two cards in the rig drops hashrate to 17-18 mh/s on eth and to 400 mhs (instead of usual 600 mhs) on dcr.
Added to OP:
- AMD cards: On some Polaris cards you can notice non-constant mining speeds in dual mode when ASM mode is used; you can also see in GPU-Z that memory controller load is not constant, it drops for a few seconds.
This issue is related to hardware and I cannot find any good workaround for now. Try to increase "-dcri" value a bit, it will reduce ETH speed a bit, but speeds will be much more stable.
April 15, 2017, 05:02:33 AM
Hey guys. Im confused for a long time. Been mining only eth on my 1st rig with 6*rx 470s doing 168 Mhs. Rig is on 1kw psu and consuming 860 watt at the wall. I think its about max power limit of psu but id like to do dual mining another coin as well. Could you plz answer, if i run dual mining, can i stay below 1kw power hugry situation and do more prof. then eth only? And what coin is to be ?
April 15, 2017, 04:57:41 AM
Hello all, and thanks Claymore for new miner version!
Though, I have a problem and hopefully one can help me about that.
I got several rigs of 3x470, 4x470 (4 GB) and 4x470 (8 GB) videocards.
After updating the Claymore ETH from 7.4 version to 9.0 I got a strange problem.
Decred increased *2, that's a fact, but hashrate of both ETH and DCR became floating. Usually my cards give 21 or 24 Mh/s (nothing is overclocked/modded, all stock) depending on whether its Asus strix 4gb or Sapphire nitro 8gb, but now once in several seconds one or two cards in the rig drops hashrate to 17-18 mh/s on eth and to 400 mhs (instead of usual 600 mhs) on dcr.
That's how Afterburner log looks like: http://img.imgland.net/aT4LZLU.png
on 7.4 there were no peaks, no nothing.
ASM is ON. If I turn ASM off - everything's fine.
But hey! Isn't it all about ASM = on and having *2 DCR increase?
Windows 7 / SSD / 16 GB Virtual RAM / Latest drivers.
If anyone has such a problem and solved it - I'd be grateful for help.
Though, I have a problem and hopefully one can help me about that.
I got several rigs of 3x470, 4x470 (4 GB) and 4x470 (8 GB) videocards.
After updating the Claymore ETH from 7.4 version to 9.0 I got a strange problem.
Decred increased *2, that's a fact, but hashrate of both ETH and DCR became floating. Usually my cards give 21 or 24 Mh/s (nothing is overclocked/modded, all stock) depending on whether its Asus strix 4gb or Sapphire nitro 8gb, but now once in several seconds one or two cards in the rig drops hashrate to 17-18 mh/s on eth and to 400 mhs (instead of usual 600 mhs) on dcr.
That's how Afterburner log looks like: http://img.imgland.net/aT4LZLU.png
on 7.4 there were no peaks, no nothing.
ASM is ON. If I turn ASM off - everything's fine.
But hey! Isn't it all about ASM = on and having *2 DCR increase?
Windows 7 / SSD / 16 GB Virtual RAM / Latest drivers.
If anyone has such a problem and solved it - I'd be grateful for help.
Jump to: