Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 99.

BFL88

newbie

Activity: 11

Merit: 0

Quote from: dvz35 on July 27, 2019, 11:57:27 AM

Quote from: BFL88 on July 25, 2019, 05:48:19 PM

Hello,

Mining with Claymore has been working fine for years, but recently getting this error with v14.7

On Linux/Xubuntu 16 with AMD RX470s 4GB

Anyone found a solution...? Have tried ' -eres 0 ' amongst a few other things.... no luck so far

-allcoins 273

Hey, thanks - tried it - but unfortunately didn't work..!

any other ideas out there..... Huh

crypsy

full member

Activity: 216

Merit: 101

Quote from: Boriss on July 27, 2019, 11:25:21 AM

Quote from: crypsy on July 27, 2019, 01:53:57 AM

Hi, gays. I have 2 1080ti. is there a way to make them hash whit 50+ using only claymores miner.( without eth enlargement pill)?

Any reason why you don't want to use enlargement pill in the first place? even Linux mining distros have already included them on the platform with options to enable or disable them so why not use it if it's there? Cool

It was working just fine until I mixed 1070ti and 1080ti , now the hashrate is all over the place when I start enlargement pill

dvz35

jr. member

Activity: 57

Merit: 3

Quote from: BFL88 on July 25, 2019, 05:48:19 PM

Hello,

Mining with Claymore has been working fine for years, but recently getting this error with v14.7

Quote

GPU3 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
GPU3 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
Setting DAG epoch #272 for GPU0
Create GPU buffer for GPU0
GPU0 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
GPU0 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
Setting DAG epoch #272 for GPU1
Create GPU buffer for GPU1....

.....GPU 0 failed
Setting DAG epoch #272 for GPU0
GPU0, OpenCL error -38 - cannot write buffer for DAG
GPU 1 failed
Setting DAG epoch #272 for GPU1
GPU1, OpenCL error -38 - cannot write buffer for DAG
GPU 2 failed...
etc,

On Linux/Xubuntu 16 with AMD RX470s 4GB

Anyone found a solution...? Have tried ' -eres 0 ' amongst a few other things.... no luck so far

-allcoins 273

Boriss

full member

Activity: 728

Merit: 115

Quote from: crypsy on July 27, 2019, 01:53:57 AM

Hi, gays. I have 2 1080ti. is there a way to make them hash whit 50+ using only claymores miner.( without eth enlargement pill)?

Any reason why you don't want to use enlargement pill in the first place? even Linux mining distros have already included them on the platform with options to enable or disable them so why not use it if it's there? Cool

crypsy

full member

Activity: 216

Merit: 101

Hi, gays. I have 2 1080ti. is there a way to make them hash whit 50+ using only claymores miner.( without eth enlargement pill)?

Metroid

sr. member

Activity: 2142

Merit: 353

Xtreme Monster

@claymore anyway to use 2 instances of the miner with the same signed driver? or any other way to install a second driver for a second miner instance?

BFL88

newbie

Activity: 11

Merit: 0

Hello,

Mining with Claymore has been working fine for years, but recently getting this error with v14.7

Quote

GPU3 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
GPU3 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
Setting DAG epoch #272 for GPU0
Create GPU buffer for GPU0
GPU0 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
GPU0 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
Setting DAG epoch #272 for GPU1
Create GPU buffer for GPU1....

.....GPU 0 failed
Setting DAG epoch #272 for GPU0
GPU0, OpenCL error -38 - cannot write buffer for DAG
GPU 1 failed
Setting DAG epoch #272 for GPU1
GPU1, OpenCL error -38 - cannot write buffer for DAG
GPU 2 failed...
etc,

On Linux/Xubuntu 16 with AMD RX470s 4GB

Anyone found a solution...? Have tried ' -eres 0 ' amongst a few other things.... no luck so far

abg00

jr. member

Activity: 288

Merit: 1

Quote from: McFast on July 25, 2019, 09:22:40 AM

epoch 280 - ok
epoch 281 - not enough memory
8gb ram, 74gb pagefile
12*rx580 4gb
adrenaline 18.5.2

eres 0 didnt help

drivers 18.6.1 and 19.7.2 same trouble
windows 10 1607 1703 1709

McFast

newbie

Activity: 5

Merit: 0

epoch 280 - ok
epoch 281 - not enough memory
8gb ram, 74gb pagefile
12*rx580 4gb
adrenaline 18.5.2

eres 0 didnt help

Code:

17:12:03:307	2304	Check and remove old log files...
17:12:03:308	2304	args: -benchmark 281 
17:12:03:311	2304	
17:12:03:312	2304	ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
17:12:03:313	2304	º                Claymore's Dual GPU Miner - v14.7               º
17:12:03:314	2304	º              ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK             º
17:12:03:315	2304	º                       Supercharged Edition                     º
17:12:03:317	2304	ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ¼
17:12:03:318	2304	
17:12:03:318	2304	b745 
17:12:05:388	2304	OpenCL platform: AMD Accelerated Parallel Processing
17:12:05:393	2304	OpenCL initializing...

17:12:05:394	2304	AMD Cards available: 12 
17:12:05:395	2304	GPU #0: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 1:0:0)
17:12:05:396	2304	GPU #0 recognized as Radeon RX 480/580
17:12:05:398	2304	GPU #1: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 2:0:0)
17:12:05:400	2304	GPU #1 recognized as Radeon RX 480/580
17:12:05:401	2304	GPU #2: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 3:0:0)
17:12:05:402	2304	GPU #2 recognized as Radeon RX 480/580
17:12:05:404	2304	GPU #3: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 4:0:0)
17:12:05:405	2304	GPU #3 recognized as Radeon RX 480/580
17:12:05:406	2304	GPU #4: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 5:0:0)
17:12:05:407	2304	GPU #4 recognized as Radeon RX 480/580
17:12:05:408	2304	GPU #5: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 6:0:0)
17:12:05:410	2304	GPU #5 recognized as Radeon RX 480/580
17:12:05:412	2304	GPU #6: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 9:0:0)
17:12:05:413	2304	GPU #6 recognized as Radeon RX 480/580
17:12:05:414	2304	GPU #7: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 10:0:0)
17:12:05:415	2304	GPU #7 recognized as Radeon RX 480/580
17:12:05:417	2304	GPU #8: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 11:0:0)
17:12:05:418	2304	GPU #8 recognized as Radeon RX 480/580
17:12:05:420	2304	GPU #9: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 12:0:0)
17:12:05:431	2304	GPU #9 recognized as Radeon RX 480/580
17:12:05:432	2304	GPU #10: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 13:0:0)
17:12:05:433	2304	GPU #10 recognized as Radeon RX 480/580
17:12:05:439	2304	GPU #11: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 15:0:0)
17:12:05:442	2304	GPU #11 recognized as Radeon RX 480/580
17:12:05:444	2304	POOL/SOLO version
17:12:05:445	2304	Platform: Windows
17:12:05:524	2304	start building OpenCL program for GPU 0...
17:12:05:861	2304	done
17:12:06:066	2304	start building OpenCL program for GPU 1...
17:12:06:354	2304	done
17:12:06:559	2304	start building OpenCL program for GPU 2...
17:12:06:852	2304	done
17:12:07:057	2304	start building OpenCL program for GPU 3...
17:12:07:343	2304	done
17:12:07:547	2304	start building OpenCL program for GPU 4...
17:12:07:830	2304	done
17:12:08:035	2304	start building OpenCL program for GPU 5...
17:12:08:321	2304	done
17:12:08:527	2304	start building OpenCL program for GPU 6...
17:12:08:814	2304	done
17:12:09:019	2304	start building OpenCL program for GPU 7...
17:12:09:302	2304	done
17:12:09:511	2304	start building OpenCL program for GPU 8...
17:12:09:792	2304	done
17:12:09:999	2304	start building OpenCL program for GPU 9...
17:12:10:288	2304	done
17:12:10:492	2304	start building OpenCL program for GPU 10...
17:12:10:775	2304	done
17:12:10:979	2304	start building OpenCL program for GPU 11...
17:12:11:263	2304	done
17:12:11:564	2304	GPU #0: algorithm ASM 1
17:12:11:620	2304	GPU #1: algorithm ASM 1
17:12:11:669	2304	GPU #2: algorithm ASM 1
17:12:11:715	2304	GPU #3: algorithm ASM 1
17:12:11:763	2304	GPU #4: algorithm ASM 1
17:12:11:818	2304	GPU #5: algorithm ASM 1
17:12:11:864	2304	GPU #6: algorithm ASM 1
17:12:11:910	2304	GPU #7: algorithm ASM 1
17:12:11:964	2304	GPU #8: algorithm ASM 1
17:12:12:018	2304	GPU #9: algorithm ASM 1
17:12:12:072	2304	GPU #10: algorithm ASM 1
17:12:12:120	2304	GPU #11: algorithm ASM 1
17:12:12:121	2304	cudaGetDeviceCount failed (35, CUDA driver version is insufficient for CUDA runtime version), probably no CUDA devices
17:12:12:122	2304	No NVIDIA CUDA GPUs detected.
17:12:12:123	2304	Total cards: 12 
17:12:12:124	2304	
Please consider using "-strap" option to increase mining speed, check Readme for details.

17:12:12:125	2304	
Please consider using "-rxboost" option to increase mining speed, check Readme for details.

17:12:12:126	2304	No NVIDIA cards in the list, NVML library will not be used.
17:12:12:545	1fd8	ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
17:12:12:560	1fd8	ETH: GPU0 off, GPU1 off, GPU2 off, GPU3 off, GPU4 off, GPU5 off, GPU6 off, GPU7 off, GPU8 off, GPU9 off, GPU10 off, GPU11 off
17:12:12:562	1fd8	 DCR - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0
17:12:12:579	1fd8	 DCR: GPU0 off, GPU1 off, GPU2 off, GPU3 off, GPU4 off, GPU5 off, GPU6 off, GPU7 off, GPU8 off, GPU9 off, GPU10 off, GPU11 off
17:12:12:593	1fd8	Current -dcri values: -dcri 30,30,30,30,30,30,30,30,30,30,30,30
17:12:13:190	2304	SSL: Imported 45 certificates from local storage
17:12:13:292	2304	

17:12:13:293	2304	
BENCHMARK MODE!

17:12:13:382	da0	Setting DAG epoch #281...
17:12:15:602	1fd8	ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
17:12:15:603	1fd8	ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s, GPU6 0.000 Mh/s, GPU7 0.000 Mh/s, GPU8 0.000 Mh/s, GPU9 0.000 Mh/s, GPU10 0.000 Mh/s, GPU11 0.000 Mh/s
17:12:15:604	1fd8	Current -dcri values: -dcri 30,30,30,30,30,30,30,30,30,30,30,30
17:12:16:649	2454	Setting DAG epoch #281 for GPU0
17:12:16:651	2454	Create GPU buffer for GPU0
17:12:16:652	6f8	Setting DAG epoch #281 for GPU6
17:12:16:654	25f4	Setting DAG epoch #281 for GPU8
17:12:16:656	255c	Setting DAG epoch #281 for GPU3
17:12:16:660	2454	GPU0 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
17:12:16:653	6f8	Create GPU buffer for GPU6
17:12:16:655	2704	Setting DAG epoch #281 for GPU9
17:12:16:656	25c8	Setting DAG epoch #281 for GPU5
17:12:16:658	27ac	Setting DAG epoch #281 for GPU2
17:12:16:659	1e20	Setting DAG epoch #281 for GPU11
17:12:16:690	2454	GPU0 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

17:12:16:671	111c	Setting DAG epoch #281 for GPU7
17:12:16:679	2714	Setting DAG epoch #281 for GPU10
17:12:16:680	25f4	Create GPU buffer for GPU8
17:12:16:686	2704	Create GPU buffer for GPU9
17:12:16:697	25c8	Create GPU buffer for GPU5
17:12:16:669	da0	Setting DAG epoch #281 for GPU1
17:12:16:689	1e20	Create GPU buffer for GPU11
17:12:16:702	6f8	GPU6 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
17:12:16:693	111c	Create GPU buffer for GPU7
17:12:16:709	25f4	GPU8 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
17:12:16:696	23c4	Setting DAG epoch #281 for GPU4
17:12:16:717	23c4	Create GPU buffer for GPU4
17:12:16:719	23c4	GPU4 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
17:12:16:726	25c8	GPU5 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
17:12:16:728	25c8	GPU5 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

17:12:16:740	da0	Create GPU buffer for GPU1
17:12:16:741	da0	GPU1 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
17:12:16:742	111c	GPU7 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
17:12:16:747	111c	GPU7 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

17:12:16:751	25f4	GPU8 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

17:12:16:688	255c	Create GPU buffer for GPU3
17:12:16:753	255c	GPU3 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
17:12:16:700	27ac	Create GPU buffer for GPU2
17:12:16:754	27ac	GPU2 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
17:12:16:755	1e20	GPU11 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
17:12:16:757	6f8	GPU6 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

17:12:16:759	da0	GPU1 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

17:12:16:704	2714	Create GPU buffer for GPU10
17:12:16:760	2714	GPU10 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
17:12:16:763	255c	GPU3 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

17:12:16:764	23c4	GPU4 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

17:12:16:778	27ac	GPU2 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

17:12:16:780	1e20	GPU11 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

17:12:16:782	2704	GPU9 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
17:12:16:783	2714	GPU10 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

17:12:16:784	2704	GPU9 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

17:12:18:612	1fd8	ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
17:12:18:614	1fd8	ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s, GPU6 0.000 Mh/s, GPU7 0.000 Mh/s, GPU8 0.000 Mh/s, GPU9 0.000 Mh/s, GPU10 0.000 Mh/s, GPU11 0.000 Mh/s
17:12:18:615	1fd8	Current -dcri values: -dcri 30,30,30,30,30,30,30,30,30,30,30,30
17:12:19:706	2454	Set global fail flag, failed GPU0
17:12:19:706	2454	GPU 0 failed
17:12:19:753	1918	Quit, please wait...
17:12:19:753	2304	Quit, please wait...
17:12:19:753	111c	Set global fail flag, failed GPU7
17:12:19:753	111c	GPU 7 failed
17:12:19:753	25c8	Set global fail flag, failed GPU5
17:12:19:753	25c8	GPU 5 failed
17:12:19:768	25f4	Set global fail flag, failed GPU8
17:12:19:768	255c	Set global fail flag, failed GPU3
17:12:19:768	255c	GPU 3 failed
17:12:19:768	6f8	Set global fail flag, failed GPU6
17:12:19:768	6f8	GPU 6 failed
17:12:19:768	da0	Set global fail flag, failed GPU1
17:12:19:768	da0	GPU 1 failed
17:12:19:768	25f4	GPU 8 failed
17:12:19:784	1e20	Set global fail flag, failed GPU11
17:12:19:784	27ac	Set global fail flag, failed GPU2
17:12:19:784	23c4	Set global fail flag, failed GPU4
17:12:19:784	1e20	GPU 11 failed
17:12:19:784	27ac	GPU 2 failed
17:12:19:784	23c4	GPU 4 failed
17:12:19:799	2714	Set global fail flag, failed GPU10
17:12:19:799	2704	Set global fail flag, failed GPU9
17:12:19:799	2704	GPU 9 failed
17:12:19:799	2714	GPU 10 failed

ManuelM92

newbie

Activity: 1

Merit: 0

Quote from: Carlorco on June 27, 2019, 06:59:23 PM

Yes i tried stock memory clock i tried another gpu bios i tried stock bios i tried all the straps - strap 1 2 3 4 5 6 seem to be when the miner is identifying the card for example
I see the line
POL8S1
POL8S2
And crash

Seem to be a problem with the motherboard because i have another rigs with the same gpu but the motherboard is asus And works perfect i tried upgrading the motherboard bios And the same issue, however without the - strap works perfect

Testing 12* rx 580 xfx on asrock h110 btc pro+

I have exactly the same issue, "strap" option does not work, do you solved it?

Claymore 14,7, 8x MSI RX570 4Gb AsRock H110 BTC Pro+

abg00

jr. member

Activity: 288

Merit: 1

Quote from: bategojko74 on July 23, 2019, 11:34:11 AM

Quote from: abg00 on July 23, 2019, 05:42:30 AM

check used memory
eth use 3.23 gb
etc use 3.36 gb

phoenixminer work fine without trouble

Does phoenix miner starts if you run it with the following parameters:
phoenixminer.exe -bench 330

same rate as now 29.5

GPU1: Allocating DAG (3.59) GB; good for epoch up to #332

and perfect work

bategojko74

member

Activity: 220

Merit: 12

Quote from: abg00 on July 23, 2019, 05:42:30 AM

check used memory
eth use 3.23 gb
etc use 3.36 gb

phoenixminer work fine without trouble

Does phoenix miner starts if you run it with the following parameters:
phoenixminer.exe -bench 330

abg00

jr. member

Activity: 288

Merit: 1

check used memory
eth use 3.23 gb
etc use 3.36 gb

phoenixminer work fine without trouble

abg00

jr. member

Activity: 288

Merit: 1

Quote from: Claymore on July 23, 2019, 04:05:25 AM

Quote from: abg00 on July 23, 2019, 03:16:38 AM

Quote from: Claymore on July 22, 2019, 12:56:16 PM

Quote from: awarywocki on July 22, 2019, 11:50:54 AM

sure. But two of three rigs just hangs at this same moment (Rx 470 & Rx 480), it happens when ETC touch epoch 280. Below is my config.txt content (they nearly just the same on both machines)

Try "-eres 0".

plz check my answer

Error -61 is CL_INVALID_BUFFER_SIZE, you can google about it.
Miner cannot assign enough GPU memory. If some other miner works fine - use it, but it will stop working soon too. The most probable reason (it's related to both nvidia and amd cards):
https://social.technet.microsoft.com/Forums/en-US/15b9654e-5da7-45b7-93de-e8b63faef064/windows-10-does-not-let-cuda-applications-to-use-all-vram-on-especially-secondary-graphics-cards?forum=win10itprohardware
Exact size of reserved GPU memory depends on Windows build and drivers, but afaik the values are similar.

topic about nvidia card

eth dag 278 3.13 GB work fine
etc dag 281 3.2 GB dont work. its realy now. -eres 0 dont work

elzium

member

Activity: 96

Merit: 10

How about #benchmark 300+?

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: abg00 on July 23, 2019, 03:16:38 AM

Quote from: Claymore on July 22, 2019, 12:56:16 PM

Quote from: awarywocki on July 22, 2019, 11:50:54 AM

sure. But two of three rigs just hangs at this same moment (Rx 470 & Rx 480), it happens when ETC touch epoch 280. Below is my config.txt content (they nearly just the same on both machines)

Try "-eres 0".

plz check my answer

Error -61 is CL_INVALID_BUFFER_SIZE, you can google about it.
Miner cannot assign enough GPU memory. If some other miner works fine - use it, but it will stop working soon too. The most probable reason (it's related to both nvidia and amd cards):
https://social.technet.microsoft.com/Forums/en-US/15b9654e-5da7-45b7-93de-e8b63faef064/windows-10-does-not-let-cuda-applications-to-use-all-vram-on-especially-secondary-graphics-cards?forum=win10itprohardware
Exact size of reserved GPU memory depends on Windows build and drivers, but afaik the values are similar.

abg00

jr. member

Activity: 288

Merit: 1

Quote from: Claymore on July 22, 2019, 12:56:16 PM

Quote from: awarywocki on July 22, 2019, 11:50:54 AM

sure. But two of three rigs just hangs at this same moment (Rx 470 & Rx 480), it happens when ETC touch epoch 280. Below is my config.txt content (they nearly just the same on both machines)

Try "-eres 0".

plz check my answer

abg00

jr. member

Activity: 288

Merit: 1

pool nano
coin etc
card 2 x rx570 4gb
swap size 39gb
ram size 4gb

bat file
set GPU_FORCE_64BIT_PTR=0
set GPU_MAX_HEAP_SIZE=100
set GPU_USE_SYNC_OBJECTS=1
set GPU_MAX_ALLOC_PERCENT=100
set GPU_SINGLE_ALLOC_PERCENT=100

EthDcrMiner64.exe -allcoins etc -logfile noappend.log -retrydelay 5 -mport -3336 -ttli 75 -mode 1 -eres 0 -asm 2 -tt 65 -ttli 75 -esm 3 -r 1 -cclock 1100 -cvddc 800,800,870,870,870 -mclock 2020,2020,1950,1950,1950 -mvddc 850,850,900,900,900 -powlim 50 -rxboost 1 -di 01234

config file empty

epool file
POOL: etc-eu1.nanopool.org:19999, WALLET: removed , PSW: x, ESM: 0, ALLPOOLS: 0

error log

11:00:58:848   13cc   Check and remove old log files...
11:00:58:849   13cc   args: -allcoins etc -logfile noappend.log -retrydelay 5 -mport -3336 -ttli 75 -mode 1 -eres 0 -asm 2 -tt 65 -ttli 75 -esm 3 -r 1 -cclock 1100 -cvddc 800,800,870,870,870 -mclock 2020,2020,1950,1950,1950 -mvddc 850,850,900,900,900 -powlim 50 -rxboost 1 -di 01234
11:00:58:849   13cc
11:00:58:849   13cc   ЙHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH»
11:00:58:849   13cc   є Claymore's Dual GPU Miner - v14.6 є
11:00:58:849   13cc   є ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK є
11:00:58:849   13cc   є Supercharged Edition є
11:00:58:851   13cc   ИHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHj
11:00:58:852   13cc
11:00:58:852   13cc   b735
11:00:59:053   13cc   ETH: 6 pools are specified
11:00:59:053   13cc   Main Ethereum pool is etc-eu1.nanopool.org:19999
11:00:59:398   13cc   OpenCL platform: Intel(R) OpenCL
11:00:59:398   13cc   OpenCL platform: AMD Accelerated Parallel Processing
11:00:59:399   13cc   OpenCL initializing...

11:00:59:399   13cc   AMD Cards available: 2
11:00:59:399   13cc   GPU #0: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 5:0:0)
11:00:59:399   13cc   GPU #0 recognized as Radeon RX 470/570
11:00:59:399   13cc   GPU #1: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 8:0:0)
11:00:59:399   13cc   GPU #1 recognized as Radeon RX 470/570
11:00:59:399   13cc   POOL/SOLO version
11:00:59:400   13cc   Platform: Windows
11:00:59:436   13cc   start building OpenCL program for GPU 0...
11:00:59:733   13cc   done
11:00:59:937   13cc   start building OpenCL program for GPU 1...
11:01:00:229   13cc   done
11:01:00:469   13cc   GPU #0: algorithm ASM 2
11:01:00:512   13cc   GPU #1: algorithm ASM 2
11:01:00:512   13cc   cudaGetDeviceCount failed (35, CUDA driver version is insufficient for CUDA runtime version), probably no CUDA devices
11:01:00:513   13cc   No NVIDIA CUDA GPUs detected.
11:01:00:513   13cc   Total cards: 2
11:01:00:513   13cc
Please consider using "-strap" option to increase mining speed, check Readme for details.

11:01:04:117   13cc
You can use "+" and "-" keys to achieve best ETH speed, see "FINE TUNING" section in Readme for details.

11:01:05:117   13cc   No NVIDIA cards in the list, NVML library will not be used.
11:01:05:119   13cc   Driver version: 0x801
11:01:05:134   13cc   driver init ok
11:01:05:168   13cc   GPU# 0 -rxboost option is applied successfully
11:01:05:201   13cc   GPU# 1 -rxboost option is applied successfully
11:01:06:242   13cc   SSL: Imported 37 certificates from local storage
11:01:06:251   1bc   ETH: Stratum - connecting to 'etc-eu1.nanopool.org' <51.15.89.69> port 19999 (unsecure)
11:01:06:312   1bc   sent: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["removed", "x"], "id": 2, "method": "eth_submitLogin"}

11:01:06:312   1bc   ETH: Stratum - Connected (etc-eu1.nanopool.org:19999) (unsecure)
11:01:06:343   13cc   ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)

11:01:06:344   13cc   ETH: eth-proxy stratum mode
11:01:06:345   13cc   "-allcoins" option is set, default pools will be used for devfee, check "Readme" file for details.
11:01:06:346   13cc   Watchdog enabled
11:01:06:347   13cc   Remote management (READ-ONLY MODE) is enabled on port 3336
11:01:06:347   13cc

11:01:06:348   13cc   You did not specify -dcri values directly, so they will be detected automatically
11:01:06:349   13cc   Automatic detection of best -dcri values started, please wait...

11:01:06:389   1bc   buf: {"jsonrpc":"2.0","id":2,"result":true}
{"jsonrpc":"2.0","id":0,"result":["0xc03304e768748f0e1522de45194a56e320af2fbf33d3fcbc79fb37a423ebe8b1","0x706a056e1dad1a5aeabdf3ce09ebccf47a88a8955c0f27181c5b0de3f7ab9ea9","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}

11:01:06:389   1bc   ETH: Authorized
11:01:06:389   1bc   sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

11:01:06:389   1bc   remove first packet 243
11:01:06:457   1bc   buf: {"jsonrpc":"2.0","id":0,"result":["0xc03304e768748f0e1522de45194a56e320af2fbf33d3fcbc79fb37a423ebe8b1","0x706a056e1dad1a5aeabdf3ce09ebccf47a88a8955c0f27181c5b0de3f7ab9ea9","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}

11:01:06:461   1330   Setting DAG epoch #281...
11:01:08:061   6d8   GPU 0 temp = 50, old fan speed = 75, new fan speed = 79

11:01:08:071   6d8   GPU 1 temp = 48, old fan speed = 77, new fan speed = 78

11:01:09:704   1330   Setting DAG epoch #281 for GPU1
11:01:09:706   13b4   Setting DAG epoch #281 for GPU0
11:01:09:707   13b4   Create GPU buffer for GPU0
11:01:09:708   13b4   GPU0 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
11:01:09:707   1330   Create GPU buffer for GPU1
11:01:09:708   13b4   GPU0 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

11:01:09:709   1330   GPU1 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
11:01:09:709   1330   GPU1 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

11:01:11:082   6d8   GPU 0 temp = 49, old fan speed = 72, new fan speed = 72

11:01:11:092   6d8   GPU 1 temp = 48, old fan speed = 79, new fan speed = 70

11:01:12:708   13b4   Set global fail flag, failed GPU0
11:01:12:708   13b4   GPU 0 failed
11:01:12:709   c88   Setting DAG epoch #281 for GPU0
11:01:12:710   c88   GPU0, OpenCL error -38 - cannot write buffer for DAG

11:01:12:710   1330   Set global fail flag, failed GPU1
11:01:12:711   1330   GPU 1 failed
11:01:12:712   bb4   Setting DAG epoch #281 for GPU1
11:01:12:712   bb4   GPU1, OpenCL error -38 - cannot write buffer for DAG

11:01:14:103   6d8   GPU 0 temp = 46, old fan speed = 66, new fan speed = 63

11:01:14:113   6d8   GPU 1 temp = 44, old fan speed = 72, new fan speed = 60

11:01:15:712   c88   Set global fail flag, failed GPU0
11:01:15:712   c88   GPU 0 failed
11:01:15:714   bb4   Set global fail flag, failed GPU1
11:01:15:714   bb4   GPU 1 failed
11:01:16:397   1bc   ETH: checking pool connection...
11:01:16:397   1bc   sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

11:01:16:459   1bc   buf: {"jsonrpc":"2.0","id":0,"result":["0xc03304e768748f0e1522de45194a56e320af2fbf33d3fcbc79fb37a423ebe8b1","0x706a056e1dad1a5aeabdf3ce09ebccf47a88a8955c0f27181c5b0de3f7ab9ea9","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}

11:01:17:124   6d8   GPU 0 temp = 46, old fan speed = 57, new fan speed = 54

11:01:17:135   6d8   GPU 1 temp = 44, old fan speed = 62, new fan speed = 50

11:01:18:174   d20   Quit...
11:01:18:230   c8   GPU 0 temp = 46, old fan speed = 52, new fan speed = 45

11:01:18:233   c8   GPU 1 temp = 44, old fan speed = 54, new fan speed = 40

abg00

jr. member

Activity: 288

Merit: 1

Quote from: abg00 on July 20, 2019, 07:16:34 AM

Quote from: awarywocki on July 20, 2019, 06:44:50 AM

Quote from: abg00 on July 20, 2019, 05:38:25 AM

Quote from: farmgpu0914 on July 15, 2019, 02:23:16 PM

21:45:54:383 54900700 Setting DAG epoch #280 for GPU0
21:45:54:383 54900700 Create GPU buffer for GPU0
21:45:54:383 54900700 GPU0 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
21:45:54:383 54900700 GPU0 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

same trouble now with nicehash

OpenCL error -38 - cannot write buffer for DAG

Switch mining to ETH (epoch 272 for now). I wrote about this few days ago. We need new version of claymore I guess

possible drivers trouble? use 18.6.1
14.6 same trouble
phoenixminer work without this trouble?

add
check again. trouble because ETC coin DAG epoch #281

error already write in this topic. make test again later and write log file. swap 60+ gb. 8 gpu rx570 4 gb

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: abg00 on July 22, 2019, 02:57:32 PM

Quote from: Claymore on July 22, 2019, 12:56:16 PM

Quote from: awarywocki on July 22, 2019, 11:50:54 AM

sure. But two of three rigs just hangs at this same moment (Rx 470 & Rx 480), it happens when ETC touch epoch 280. Below is my config.txt content (they nearly just the same on both machines)

Try "-eres 0".

miner dont work/ test on 8 gb card

EthDcrMiner64.exe -allcoins 1 -eres 0 -mode 1 -asm 2 -esm 3 -rxboost 1

epool
POOL: stratum+tcp://daggerhashimoto.eu.nicehash.com:3353, WALLET: xxx.RIG01, PSW: x, ALLPOOLS: 1

then switch to etc mining DAG 281 have error

pnoenixminer work fine

test on lot of rigs with different card 4\8 gb same error
14.6 14.7 same error
driver 18.6.1 19.7.2 same error

plz fixminer

add test directly on etc pool. same error

What error you have? Post it here...

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 99. (Read 6590757 times)