Author

Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 103. (Read 3839201 times)

sr. member
Activity: 441
Merit: 252
^^^^^^^^^^

Can someone kill this shill post? Clear spam from a clear scam. 1 post newb?
newbie
Activity: 7
Merit: 0
I hope Eastshore's legit, their site looks really borderline... How do they still have s9s, they have eth asics doing 190mhs for 700w, some altcoins asics I have never seen before.
hero member
Activity: 574
Merit: 500
I'm mining in flypool using claymore miner last version. From time to time i noticed that the miner found a share but then the "share accepted" doesnt appear neither the "share rejected". Im pretty sure is an issue with flypool but i want to know if u guys having this issues too. Thanks
hero member
Activity: 616
Merit: 500
easy way to undervolt, is just use msi afterburner.  of course change the mem straps for higher speeds first though.  Just look at your voltage in the monitor window, and drop that baby down as much as you can.  if it crashes, no biggie, just bring it a little higher.  changing the core clock will change the .states so the voltage will be different and will have to be played with again.

bro i am using RX 470 4GB and my setting is. pls tell me which setting i have to reduce or increase for undervolt via msi afterburner.


core clock=1216
memoryclock=1750
legendary
Activity: 2294
Merit: 1182
Now the money is free, and so the people will be
Failed to mine anything on ubuntu 16.04 with 7970 3GB using amdgpu-pro 16.60
Code:
����������������������������������������������������������������ͻ
�             Claymore's ZCash AMD GPU Miner v12.4               �
����������������������������������������������������������������ͼ

ZEC: 1 pool is specified
Main ZCash pool is eu1-zcash.flypool.org:3443

Catalyst 15.12 is REQUIRED for best performance and compatibility
15.12 does not support some Fiji(Fury) cards, use 16.3.2 for them
For 4xx cards (Polaris) Crimson 16.12.2 is recommended

At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools
NOTE: miner uses 3000 rounds to calculate average speed, so it may take about a minute to get correct speed.
OpenCL initializing...
AMD Cards available: 1
GPU #0: Tahiti, 2822 MB available, 16 compute units
POOL version
GPU #0 algorithm ASM, intensity 6
Total cards: 1
AMD ADL library not found.
ZEC: Stratum - connecting to 'eu1-zcash.flypool.org' <94.23.12.63> port 3443
Watchdog enabled
Remote management is enabled on port 4000
Warning: use negative -mport option value (read-only mode) or disable remote management entirely if you think that you can be attacked via this port!

SSL/TLS encryption is enabled
ZEC: Stratum - Connected (eu1-zcash.flypool.org:3443) (SSL/TLS)
ZEC: Authorized
Pool sets new share target: 0x0020c49b (diff: 2000H)
ZEC: 03/29/17-05:37:21 - New job from eu1-zcash.flypool.org:3443
ZEC - Total Speed: 0.000 H/s, Total Shares: 0, Rejected: 0, Time: 00:00
ZEC: GPU0 0.000 H/s
GPU0 t=38C fan=23%

any ideas?


try intensity at 2 or something like that
newbie
Activity: 4
Merit: 0
Failed to mine anything on ubuntu 16.04 with 7970 3GB using amdgpu-pro 16.60
Code:
export GPU_FORCE_64BIT_PTR=0
export GPU_MAX_HEAP_SIZE=100
export GPU_USE_SYNC_OBJECTS=1
export GPU_MAX_ALLOC_PERCENT=100
export GPU_SINGLE_ALLOC_PERCENT=100

./zecminer64 -di 0 -i 2 -mport 127.0.0.1:4000 -zpool ssl://eu1-zcash.flypool.org:3443 -zwal t1YZMnyXStuGKykkFxM6Lh8DTVJdTMx6R51.worker1 -zpsw x -dbg -1

����������������������������������������������������������������ͻ
�             Claymore's ZCash AMD GPU Miner v12.4               �
����������������������������������������������������������������ͼ

ZEC: 1 pool is specified
Main ZCash pool is eu1-zcash.flypool.org:3443

Catalyst 15.12 is REQUIRED for best performance and compatibility
15.12 does not support some Fiji(Fury) cards, use 16.3.2 for them
For 4xx cards (Polaris) Crimson 16.12.2 is recommended

At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools
NOTE: miner uses 3000 rounds to calculate average speed, so it may take about a minute to get correct speed.
OpenCL initializing...
AMD Cards available: 1
GPU #0: Tahiti, 2822 MB available, 16 compute units
POOL version
GPU #0 algorithm ASM, intensity 6
Total cards: 1
AMD ADL library not found.
ZEC: Stratum - connecting to 'eu1-zcash.flypool.org' <94.23.12.63> port 3443
Watchdog enabled
Remote management is enabled on port 4000
Warning: use negative -mport option value (read-only mode) or disable remote management entirely if you think that you can be attacked via this port!

SSL/TLS encryption is enabled
ZEC: Stratum - Connected (eu1-zcash.flypool.org:3443) (SSL/TLS)
ZEC: Authorized
Pool sets new share target: 0x0020c49b (diff: 2000H)
ZEC: 03/29/17-05:37:21 - New job from eu1-zcash.flypool.org:3443
ZEC - Total Speed: 0.000 H/s, Total Shares: 0, Rejected: 0, Time: 00:00
ZEC: GPU0 0.000 H/s
GPU0 t=38C fan=23%

any ideas?
jr. member
Activity: 57
Merit: 5
no oc .. but some of u manage to get 290 around 365h/s. how to get ?thanks

Flash 290 with 390 bios.... with OC i can get about 400h/s
http://www.overclock.net/t/1564219/modded-r9-390x-bios-for-r9-290-290x-updated-02-16-2016


hello bro....nice...done flash with this..but if i went to oc my card...normal clock 965/1250...went to oc such as 1100/1300...incorrect data ...using 15.12 driver and cm 12.3. may i know what setting u do and what driver and claymore are u using now?
rpg
hero member
Activity: 728
Merit: 500
nicehash

dagger+dcr dual mode...

eth-good work
dcr - rejected rejected rejected

NiseHash support service, says that the claymore is not compatible with our service


Wrong thread. Try the eth thread
member
Activity: 148
Merit: 10
nicehash

dagger+dcr dual mode...

eth-good work
dcr - rejected rejected rejected

NiseHash support service, says that the claymore is not compatible with our service
full member
Activity: 269
Merit: 102
he might be waiting for the RX5's and vega to be released be for we see any new version

Maybe enjoying a long needed vacation!
member
Activity: 79
Merit: 10
he might be waiting for the RX5's and vega to be released be for we see any new version
hero member
Activity: 546
Merit: 500
Claymore's ZCash AMD GPU Miner.
=========================
Latest version v12.4:

Is anybody know when is the new version coming?

The speed increase will be more difficult now.
hero member
Activity: 616
Merit: 500
is supphire provide warranty for burnt cards?

START AN RMA TICKET--

If the card "burned" in normal use, it should be replaced under warranty.  If you dropped it in a fire, it won't be replaced.  You will need to talk to Sapphire support.       --scryptr
ok thanks i will send card to service center
full member
Activity: 269
Merit: 102
Claymore's ZCash AMD GPU Miner.
=========================
Latest version v12.4:

Is anybody know when is the new version coming?

No news from Claymore lately. I feel there isn't much more speed improvements coming just feature updates. This is based upon an old post from him awhile back. You can always check to see his latest posts here: https://bitcointalksearch.org/user/claymore-306958
newbie
Activity: 21
Merit: 0
Claymore's ZCash AMD GPU Miner.
=========================
Latest version v12.4:

Is anybody know when is the new version coming?
legendary
Activity: 1797
Merit: 1028
is supphire provide warranty for burnt cards?

START AN RMA TICKET--

If the card "burned" in normal use, it should be replaced under warranty.  If you dropped it in a fire, it won't be replaced.  You will need to talk to Sapphire support.       --scryptr
hero member
Activity: 616
Merit: 500
is supphire provide warranty for burnt cards?
sr. member
Activity: 504
Merit: 250
today my miner stopped and i restart and my one RX 470 card burned, i dont know how
One of my 470 also burned a couple of hours ago, on version 12.4.

I also had to reduce intensity on some old 280X - I just went back to 12.3 where things seems more stable.

You really think its burned ? Did you tried card on other PC ? , other mobo ? single card on other PC ?

smell is coming from card. its because of short circuit and i tried it in other pc not working

480 burned here, otherwise 100% rock solid rig. Card just gave up. Happens though.
hero member
Activity: 616
Merit: 500
today my miner stopped and i restart and my one RX 470 card burned, i dont know how
One of my 470 also burned a couple of hours ago, on version 12.4.

I also had to reduce intensity on some old 280X - I just went back to 12.3 where things seems more stable.

You really think its burned ? Did you tried card on other PC ? , other mobo ? single card on other PC ?

smell is coming from card. its because of short circuit and i tried it in other pc not working
sr. member
Activity: 302
Merit: 250
v12.4:

- slightly improved speed for some cards (1-2%).
- added "-gmap" option.
- a few minor changes/improvements.

dual pool dont work
only one pool work fine

I think the ZEC miner does not have dual mining.
Jump to: