Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 253. (Read 3839163 times)
For me 290/390 with V9.3 is faster, for other cards is some increase in V10
ok so this is slower for 290/390 what even odd is on those setups i cant force -a 3 and on 1 of my dual 290x rig if i set it to none or auto it select -a 1 for the 1st and -a 2 for the 2nd 290x but it is faster for 280x/7970
7970 is up to 268
i went back to 9.3 on 290/x cards as i hit 355 on those with it
?
7970 is up to 268
i went back to 9.3 on 290/x cards as i hit 355 on those with it
?
Does anybody run these miner on win 10?
Yep, i using win 10
Are they the same performance as win 7?
really nice speedup for my 2x480
but I'm seeing this
https://i.imgur.com/Mh48kJ2.png
only for GPU0, same OC settings for both cards
1340 - 1040mv, 2100 - 1000mv
I didn't have that problem with 9.3 version, any suggestions?
but I'm seeing this
https://i.imgur.com/Mh48kJ2.png
only for GPU0, same OC settings for both cards
1340 - 1040mv, 2100 - 1000mv
I didn't have that problem with 9.3 version, any suggestions?
That's way too much. The sweet spot is 1100-1150mhz core and 0.9V and around 210-220mh.
Algorithm #2 seems to be the best for Fiji GPUs. 370H/s per card.
I can confirm this, im pushing my Fury +10% engine clock and getting 390+ h/s
btw for 390x -a 1 works best
and for rx 480 8gb and fury -a 2 works best
cant get miner to select -a 3 though, dunno what seems to be the problem
it automatically selects 2# algo
Guys, what is your optimal -a value for Polaris cards?
Another great update thanks
Algorithm #1 for nano if undervolted and underclocked 
really nice speedup for my 2x480
but I'm seeing this
only for GPU0, same OC settings for both cards
1340 - 1040mv, 2100 - 1000mv
I didn't have that problem with 9.3 version, any suggestions?
but I'm seeing this
only for GPU0, same OC settings for both cards
1340 - 1040mv, 2100 - 1000mv
I didn't have that problem with 9.3 version, any suggestions?
Algorithm #2 seems to be the best for Fiji GPUs. 370H/s per card.
Reaching 750 H/s with my each set of 3 RX 480 8 GB.
Great improvement! This much speed gain once again was not expected.
When you see usage of memory controler at 95-100% that will be speed. Great improvement! This much speed gain once again was not expected.
Reaching 750 H/s with my each set of 3 RX 480 8 GB.
Great improvement! This much speed gain once again was not expected.
Great improvement! This much speed gain once again was not expected.
the new update is great
rx480 working at 270
rx470 working at 230
280x working at 215
7850 working at 115
rx480 working at 270
rx470 working at 230
280x working at 215
7850 working at 115
can anyone share their hash rate of SAPPHIRE NITRO Radeon R9 Fury NTOC+SR 4GB 4096-Bit HBM TRI-X OC+ (UEFI) please
My Sapphire TriX Fury gets 350 at stock.
Thanks mate
No problem. Slight increase to 355 with the version 10.
rx 470 4gb his (1300/2000) - 22 h/s
WTF?
WTF?
check the gpu speeds - ive had that where a 470 card gets stuck at 300MHz/300MHz and it only does about 20-24H/s (or ~2MH/s at ethereum), and needs to have the driver restarted
Rx 480 8Gb 1410/2150 strap 1750 about 300sol
Does anybody run these miner on win 10?
Yep, i using win 10
Does anybody run these miner on win 10?
R7 370's (4gb) not affected by recent updates 
My hashrate with my msi rx 480 4gb's 1300/2000 (modded bios) seem to fluctuate between 274 to 261 but goes as low as 255 sometimes. Not complaining though still an increase with this version. I Gotta make some tweaks.
I'm getting 255, it seems to be stable, i run 1200/2000 with 1500 strap.
That sounds perfect, keep on hashing..
Jump to: