what is wrong with my 280X?
seems 280x beats rx 480 again? LOL!
What miner do you use?seems 280x beats rx 480 again? LOL!
omg, I cry. I don't believe what I'm reading here...
Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 248. (Read 3839163 times)
omg, I cry. I don't believe what I'm reading here...
Hi all wanting to use 7990 and RX 470 in same rig. Had issues with ethereum mining with this combo and using the 16 drivers, this resulted in the 7990 hash rate dropping significantly by around 50%.
Is it possible with any of the newer drivers to pair these two together without sacrificing hash rates on either of them, if so what drivers are recommended?
Is it possible with any of the newer drivers to pair these two together without sacrificing hash rates on either of them, if so what drivers are recommended?
I tried to run 7990s and 480x on the same rig, and it will "work" but its not very stable. Id use two rigs if possible. The older 79xx cards like the 15.12 drivers, but these drivers wont detect my 480's ( and probably the 470's).
JJ
when u run cards like that in same rig u have to try diff configurations in card order also try 15.x drivers my case drivers dont make much difference i been running 1 rig with 7970 with a 290x with 14.12 7970 is at 267 v10 290 is at 335 v9.3 as 9.3 is better 4 290/390 atm
with your type i just set a guys r480 with 2 290x's it didnt like the rx480 in 2nd or last but 1st pcie slot just depends on the rig(mobo)as this was on a rig that wasnt cross x compatible was a old q9550 rig
For the last couple of weeks, I have noticed that my 8 GPUs rig is submitting about 300 less sol/s than what it is reporting.
the rig detials
Claymore 10v for the lats 16h but 9.3 before for several days ect
windows 10
amd driver 16.11.3. I don't overclock at all
AMD Cards available: 8
GPU #0: Tahiti, 3072 MB available, 32 compute units
GPU #0 recognized as Radeon 280X/380X
GPU #1: Tahiti, 3072 MB available, 32 compute units
GPU #1 recognized as Radeon 280X/380X
GPU #2: Tahiti, 3072 MB available, 32 compute units
GPU #2 recognized as Radeon 280X/380X
GPU #3: Tahiti, 3072 MB available, 32 compute units
GPU #3 recognized as Radeon 280X/380X
GPU #4: Tahiti, 3072 MB available, 32 compute units
GPU #4 recognized as Radeon 280X/380X
GPU #5: Hawaii, 8192 MB available, 44 compute units
GPU #5 recognized as Radeon 390X
GPU #6: Hawaii, 8192 MB available, 44 compute units
GPU #6 recognized as Radeon 390X
GPU #7: Hawaii, 8192 MB available, 40 compute units
GPU #7 recognized as Radeon 390
The 280x/380x are hd7970 but it does not seems to have any negative effect.
the rig detials
Claymore 10v for the lats 16h but 9.3 before for several days ect
windows 10
amd driver 16.11.3. I don't overclock at all
AMD Cards available: 8
GPU #0: Tahiti, 3072 MB available, 32 compute units
GPU #0 recognized as Radeon 280X/380X
GPU #1: Tahiti, 3072 MB available, 32 compute units
GPU #1 recognized as Radeon 280X/380X
GPU #2: Tahiti, 3072 MB available, 32 compute units
GPU #2 recognized as Radeon 280X/380X
GPU #3: Tahiti, 3072 MB available, 32 compute units
GPU #3 recognized as Radeon 280X/380X
GPU #4: Tahiti, 3072 MB available, 32 compute units
GPU #4 recognized as Radeon 280X/380X
GPU #5: Hawaii, 8192 MB available, 44 compute units
GPU #5 recognized as Radeon 390X
GPU #6: Hawaii, 8192 MB available, 44 compute units
GPU #6 recognized as Radeon 390X
GPU #7: Hawaii, 8192 MB available, 40 compute units
GPU #7 recognized as Radeon 390
The 280x/380x are hd7970 but it does not seems to have any negative effect.
Bro, how did you manage to connect 8 AMD GPU's on Windows 10?
Thank you in advance for your response.
Have a great day.
Hi all wanting to use 7990 and RX 470 in same rig. Had issues with ethereum mining with this combo and using the 16 drivers, this resulted in the 7990 hash rate dropping significantly by around 50%.
Is it possible with any of the newer drivers to pair these two together without sacrificing hash rates on either of them, if so what drivers are recommended?
Is it possible with any of the newer drivers to pair these two together without sacrificing hash rates on either of them, if so what drivers are recommended?
I tried to run 7990s and 480x on the same rig, and it will "work" but its not very stable. Id use two rigs if possible. The older 79xx cards like the 15.12 drivers, but these drivers wont detect my 480's ( and probably the 470's).
JJ
V 10 ...rx 470 4gb
243h/s
what are your setting? I only get 233 h/s for sapphire rx 470 4gb243h/s
Gpu clock
1250
memory clock
1750
-75mv
245h/s
MY mined zcash in this pool...best pool in my idea
This link SING IN in pool
https://minergate.com/a/e172e848728edd0d2b97b9b5
what does -75mv do? do cards save power or the heat they produce is lower?
Hi all wanting to use 7990 and RX 470 in same rig. Had issues with ethereum mining with this combo and using the 16 drivers, this resulted in the 7990 hash rate dropping significantly by around 50%.
Is it possible with any of the newer drivers to pair these two together without sacrificing hash rates on either of them, if so what drivers are recommended?
Is it possible with any of the newer drivers to pair these two together without sacrificing hash rates on either of them, if so what drivers are recommended?
when a card hits the max temperature - 1 it will drop the clock until it finds the sweet spot where the temperature is not raising further. Manually increase the fan such as the temp is well bellow the max temperature.Also keep the 7990 on the right side of the 70
Hi all wanting to use 7990 and RX 470 in same rig. Had issues with ethereum mining with this combo and using the 16 drivers, this resulted in the 7990 hash rate dropping significantly by around 50%.
Is it possible with any of the newer drivers to pair these two together without sacrificing hash rates on either of them, if so what drivers are recommended?
Is it possible with any of the newer drivers to pair these two together without sacrificing hash rates on either of them, if so what drivers are recommended?
Anyone using 7970's. What are you finding for the best Algorithm? What hashrate are you seeing?
I'm getting about 890H/s with 4 7970's using a2 i8. With a single 7090 I get 223H/s with a2 i8.
Thanks
I'm getting about 890H/s with 4 7970's using a2 i8. With a single 7090 I get 223H/s with a2 i8.
Thanks
One of my rig is acting weird
I did mine a couple of days without problem
rebooted it and then the problem has started
When I start the miner I see thaty 480 4gb show as 3gb at the beginning of the miner and then it just closes without any error message
Someone familiar with this problem?
I did mine a couple of days without problem
rebooted it and then the problem has started
When I start the miner I see thaty 480 4gb show as 3gb at the beginning of the miner and then it just closes without any error message
Someone familiar with this problem?
So it seems whattomine gives lower hashrates for a RX470-4gb.
Can anyone post his current 470 hashrate + power consumption with V10 please?
Can anyone post his current 470 hashrate + power consumption with V10 please?
Updated today to 220@110W.
With extra tweaking maybe 10-20 would be possible. Depends how high your core can go and still stay around 0.9V
Yeah I've seen it now, thanks for updating.
Just changed my scriptings.
For the last couple of weeks, I have noticed that my 8 GPUs rig is submitting about 300 less sol/s than what it is reporting.
the rig detials
Claymore 10v for the lats 16h but 9.3 before for several days ect
windows 10
amd driver 16.11.3. I don't overclock at all
AMD Cards available: 8
GPU #0: Tahiti, 3072 MB available, 32 compute units
GPU #0 recognized as Radeon 280X/380X
GPU #1: Tahiti, 3072 MB available, 32 compute units
GPU #1 recognized as Radeon 280X/380X
GPU #2: Tahiti, 3072 MB available, 32 compute units
GPU #2 recognized as Radeon 280X/380X
GPU #3: Tahiti, 3072 MB available, 32 compute units
GPU #3 recognized as Radeon 280X/380X
GPU #4: Tahiti, 3072 MB available, 32 compute units
GPU #4 recognized as Radeon 280X/380X
GPU #5: Hawaii, 8192 MB available, 44 compute units
GPU #5 recognized as Radeon 390X
GPU #6: Hawaii, 8192 MB available, 44 compute units
GPU #6 recognized as Radeon 390X
GPU #7: Hawaii, 8192 MB available, 40 compute units
GPU #7 recognized as Radeon 390
The 280x/380x are hd7970 but it does not seems to have any negative effect.
the rig detials
Claymore 10v for the lats 16h but 9.3 before for several days ect
windows 10
amd driver 16.11.3. I don't overclock at all
AMD Cards available: 8
GPU #0: Tahiti, 3072 MB available, 32 compute units
GPU #0 recognized as Radeon 280X/380X
GPU #1: Tahiti, 3072 MB available, 32 compute units
GPU #1 recognized as Radeon 280X/380X
GPU #2: Tahiti, 3072 MB available, 32 compute units
GPU #2 recognized as Radeon 280X/380X
GPU #3: Tahiti, 3072 MB available, 32 compute units
GPU #3 recognized as Radeon 280X/380X
GPU #4: Tahiti, 3072 MB available, 32 compute units
GPU #4 recognized as Radeon 280X/380X
GPU #5: Hawaii, 8192 MB available, 44 compute units
GPU #5 recognized as Radeon 390X
GPU #6: Hawaii, 8192 MB available, 44 compute units
GPU #6 recognized as Radeon 390X
GPU #7: Hawaii, 8192 MB available, 40 compute units
GPU #7 recognized as Radeon 390
The 280x/380x are hd7970 but it does not seems to have any negative effect.
So it seems whattomine gives lower hashrates for a RX470-4gb.
Can anyone post his current 470 hashrate + power consumption with V10 please?
Can anyone post his current 470 hashrate + power consumption with V10 please?
Updated today to 220@110W.
With extra tweaking maybe 10-20 would be possible. Depends how high your core can go and still stay around 0.9V
Im getting 1280 sol/s @ 665 watts at wall so that equates to 1280/665 = 1.92 sols per watt with r9 nano x4 underclocked and undervolted....
If i power them up as standard it works out at 1380 sols @ 775 watts at wall which works out 1.72 sols per watt!
So the way forward seems to be undervolting and underclocking if your electricity prices are costing you a pretty penny
If i power them up as standard it works out at 1380 sols @ 775 watts at wall which works out 1.72 sols per watt!
So the way forward seems to be undervolting and underclocking if your electricity prices are costing you a pretty penny
640W off the wall (modded 470*4 + stock 370):
umm... I upped the voltage a bit, so this one is the actual 640W:
umm... I upped the voltage a bit, so this one is the actual 640W:
So it seems whattomine gives lower hashrates for a RX470-4gb.
Can anyone post his current 470 hashrate + power consumption with V10 please?
Can anyone post his current 470 hashrate + power consumption with V10 please?
Hi, can anyone share modded bios for Rx 480 4g Sapphire card.
I'm getting only 240 sols on it with 1330/1850 clocks
Thank you beforehand.
I'm getting only 240 sols on it with 1330/1850 clocks
Thank you beforehand.
what is wrong with my 280X?
seems 280x beats rx 480 again? LOL!
What miner do you use?seems 280x beats rx 480 again? LOL!
claymore of course..
this 280x hitting 290 h/s in this two card rig...
my other 280x rigs are only hitting 230 h/s..
maybe the rx 480 and 280x combo does the trick, will observe and experiment more later..
Show us your GPU-Z screen
what is wrong with my 280X?
seems 280x beats rx 480 again? LOL!
https://s23.postimg.org/a9tofhbx7/280x.jpg
What miner do you use?seems 280x beats rx 480 again? LOL!
https://s23.postimg.org/a9tofhbx7/280x.jpg
claymore of course..
this 280x hitting 290 h/s in this two card rig...
my other 280x rigs are only hitting 230 h/s..
maybe the rx 480 and 280x combo does the trick, will observe and experiment more later..
Show us your GPU-Z screen
what is wrong with my 280X?
seems 280x beats rx 480 again? LOL!
What miner do you use?seems 280x beats rx 480 again? LOL!
claymore of course..
this 280x hitting 290 h/s in this two card rig...
my other 280x rigs are only hitting 230 h/s..
maybe the rx 480 and 280x combo does the trick, will observe and experiment more later..
Any place / documentation on which are the supported graphics card for using Claymore's GPU Miner ?
I have an AMD Radeon HD 6450 it does not seem to be supported. It only using the CPU .
I had tried with v9.3 and also with 7.x
I have the latest drivers installed ( Crimson ReLive Edition 16.12.2 ) installed . But it does not seem to be working . This is the message on the console it gives :
ZEC - Total Speed: 0.000 H/s, Total Shares: 0, Rejected: 0, Time: 00:01
ZEC: GPU0 0.000 H/s
with niceminer (nheqminer_v0.4b_suprnova) for windows and using suprnova pool, am getting around 7.69 to 8 Sols/s. Is this quite low for this configuration or is it just about the speed that one can get with this config ?
Any pointers are appreciated.
I have an AMD Radeon HD 6450 it does not seem to be supported. It only using the CPU .
I had tried with v9.3 and also with 7.x
I have the latest drivers installed ( Crimson ReLive Edition 16.12.2 ) installed . But it does not seem to be working . This is the message on the console it gives :
ZEC - Total Speed: 0.000 H/s, Total Shares: 0, Rejected: 0, Time: 00:01
ZEC: GPU0 0.000 H/s
with niceminer (nheqminer_v0.4b_suprnova) for windows and using suprnova pool, am getting around 7.69 to 8 Sols/s. Is this quite low for this configuration or is it just about the speed that one can get with this config ?
Any pointers are appreciated.
install driver version 15.12 and upgrade from there.
Jump to: