what is wrong with my 280X?
seems 280x beats rx 480 again? LOL!
https://s23.postimg.org/a9tofhbx7/280x.jpg
What miner do you use? seems 280x beats rx 480 again? LOL!
https://s23.postimg.org/a9tofhbx7/280x.jpg
Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 249. (Read 3839163 times)
what is wrong with my 280X?
seems 280x beats rx 480 again? LOL!
https://s23.postimg.org/a9tofhbx7/280x.jpg
seems 280x beats rx 480 again? LOL!
https://s23.postimg.org/a9tofhbx7/280x.jpg
I can't believe this
what is wrong with my 280X?
seems 280x beats rx 480 again? LOL!
seems 280x beats rx 480 again? LOL!
I tried with 15.12. and pasting bin files from Linux version.
Was getting 2000 h/s on Claymore 9.3 with 4x 290x and 2x290, on v10 getting 2005.
Tried with -a 0 1 2 and 3, and max is 2005.
With optiminer getting 2060, so I'm staying on optiminer for now
.
yeah optiminer is the fastest amd miner at the momentWas getting 2000 h/s on Claymore 9.3 with 4x 290x and 2x290, on v10 getting 2005.
Tried with -a 0 1 2 and 3, and max is 2005.
With optiminer getting 2060, so I'm staying on optiminer for now
.no it isnt i get 355 on 290x's on v9.3
also u can run both people if its slower than 9.3 for some cards run 10 on those 9.3 on the others
and ofc with speed increases the power is gonna go up u are using more cycles
Code:
12:29:13:212 12f8 GPU #0: Ellesmere, 8192 MB available, 36 compute units
12:29:13:218 12f8 GPU #1: Ellesmere, 4096 MB available, 36 compute units
12:29:13:224 12f8 GPU #2: Ellesmere, 8192 MB available, 36 compute units
12:29:13:230 12f8 GPU #3: Ellesmere, 8192 MB available, 36 compute units
12:29:13:235 12f8 GPU #4: Ellesmere, 8192 MB available, 36 compute units
12:29:13:241 12f8 GPU #5: Ellesmere, 8192 MB available, 36 compute units
12:29:13:242 12f8 ZEC - Total Speed: 1516.824 H/s, Total Shares: 93, Rejected: 0, Time: 00:06
12:29:13:252 12f8 ZEC: GPU0 261.389 H/s, GPU1 219.221 H/s, GPU2 259.277 H/s, GPU3 259.841 H/s, GPU4 255.875 H/s, GPU5 261.221 H/s
12:29:13:256 12f8 Pool switches: ZEC - 0
12:29:13:261 12f8 Current ZEC pool share target: 0x00078787 (diff: 8704H)
12:29:13:332 12f8 GPU0 t=56C fan=54%, GPU1 t=55C fan=56%, GPU2 t=73C fan=66%, GPU3 t=69C fan=50%, GPU4 t=70C fan=60%, GPU5 t=57C fan=69%
12:29:13:339 12f8
12:29:15:815 1250 GPU0 t=56C fan=55%, GPU1 t=55C fan=55%, GPU2 t=73C fan=66%, GPU3 t=69C fan=50%, GPU4 t=71C fan=61%, GPU5 t=57C fan=69%
12:29:13:218 12f8 GPU #1: Ellesmere, 4096 MB available, 36 compute units
12:29:13:224 12f8 GPU #2: Ellesmere, 8192 MB available, 36 compute units
12:29:13:230 12f8 GPU #3: Ellesmere, 8192 MB available, 36 compute units
12:29:13:235 12f8 GPU #4: Ellesmere, 8192 MB available, 36 compute units
12:29:13:241 12f8 GPU #5: Ellesmere, 8192 MB available, 36 compute units
12:29:13:242 12f8 ZEC - Total Speed: 1516.824 H/s, Total Shares: 93, Rejected: 0, Time: 00:06
12:29:13:252 12f8 ZEC: GPU0 261.389 H/s, GPU1 219.221 H/s, GPU2 259.277 H/s, GPU3 259.841 H/s, GPU4 255.875 H/s, GPU5 261.221 H/s
12:29:13:256 12f8 Pool switches: ZEC - 0
12:29:13:261 12f8 Current ZEC pool share target: 0x00078787 (diff: 8704H)
12:29:13:332 12f8 GPU0 t=56C fan=54%, GPU1 t=55C fan=56%, GPU2 t=73C fan=66%, GPU3 t=69C fan=50%, GPU4 t=70C fan=60%, GPU5 t=57C fan=69%
12:29:13:339 12f8
12:29:15:815 1250 GPU0 t=56C fan=55%, GPU1 t=55C fan=55%, GPU2 t=73C fan=66%, GPU3 t=69C fan=50%, GPU4 t=71C fan=61%, GPU5 t=57C fan=69%
great improvemnt on rx480 all stock clocks with 15% powerlimit+. using reference design xfx with 2000 mem and 1328 clocks. same rig also has powercolor red devil 480 same speeds.. the slow one is the gpu connected to monitor. its an asus rx480 4g.. its my slowest card
Thanks for the great work Claymore!
BR
Any place / documentation on which are the supported graphics card for using Claymore's GPU Miner ?
I have an AMD Radeon HD 6450 it does not seem to be supported. It only using the CPU .
I had tried with v9.3 and also with 7.x
I have the latest drivers installed ( Crimson ReLive Edition 16.12.2 ) installed . But it does not seem to be working . This is the message on the console it gives :
ZEC - Total Speed: 0.000 H/s, Total Shares: 0, Rejected: 0, Time: 00:01
ZEC: GPU0 0.000 H/s
with niceminer (nheqminer_v0.4b_suprnova) for windows and using suprnova pool, am getting around 7.69 to 8 Sols/s. Is this quite low for this configuration or is it just about the speed that one can get with this config ?
Any pointers are appreciated.
if nothing else Works try claymore's cryptonote miner v9.7. I think it works there I have an AMD Radeon HD 6450 it does not seem to be supported. It only using the CPU .
I had tried with v9.3 and also with 7.x
I have the latest drivers installed ( Crimson ReLive Edition 16.12.2 ) installed . But it does not seem to be working . This is the message on the console it gives :
ZEC - Total Speed: 0.000 H/s, Total Shares: 0, Rejected: 0, Time: 00:01
ZEC: GPU0 0.000 H/s
with niceminer (nheqminer_v0.4b_suprnova) for windows and using suprnova pool, am getting around 7.69 to 8 Sols/s. Is this quite low for this configuration or is it just about the speed that one can get with this config ?
Any pointers are appreciated.
v10
280x ~230 h/s a1
390 ~330 h/s a1
fury ~385-390 h/s a2
480 ~275-282 h/s a2
my 290x is hitting ~319 h/s in v9.3 ......at v10 it is only ~314 h/s at a1 algorithm
question:
how can i set different -a option in a rig with different cards? i want a1 for my 280x and a2 for my 480 in the same rig.
Readme.txt!!!280x ~230 h/s a1
390 ~330 h/s a1
fury ~385-390 h/s a2
480 ~275-282 h/s a2
my 290x is hitting ~319 h/s in v9.3 ......at v10 it is only ~314 h/s at a1 algorithm
question:
how can i set different -a option in a rig with different cards? i want a1 for my 280x and a2 for my 480 in the same rig.
-a algoritm selection. Possible values: 0..3. 0 - autodetect. You can also specify values for every card, for example "-a 0,3,1". Default value is "0".
thanks..didn't look at the readme.txt because i always look at the OP.. i guess claymore didn't put it there yet
Any place / documentation on which are the supported graphics card for using Claymore's GPU Miner ?
I have an AMD Radeon HD 6450 it does not seem to be supported. It only using the CPU .
I had tried with v9.3 and also with 7.x
I have the latest drivers installed ( Crimson ReLive Edition 16.12.2 ) installed . But it does not seem to be working . This is the message on the console it gives :
ZEC - Total Speed: 0.000 H/s, Total Shares: 0, Rejected: 0, Time: 00:01
ZEC: GPU0 0.000 H/s
with niceminer (nheqminer_v0.4b_suprnova) for windows and using suprnova pool, am getting around 7.69 to 8 Sols/s. Is this quite low for this configuration or is it just about the speed that one can get with this config ?
Any pointers are appreciated.
I have an AMD Radeon HD 6450 it does not seem to be supported. It only using the CPU .
I had tried with v9.3 and also with 7.x
I have the latest drivers installed ( Crimson ReLive Edition 16.12.2 ) installed . But it does not seem to be working . This is the message on the console it gives :
ZEC - Total Speed: 0.000 H/s, Total Shares: 0, Rejected: 0, Time: 00:01
ZEC: GPU0 0.000 H/s
with niceminer (nheqminer_v0.4b_suprnova) for windows and using suprnova pool, am getting around 7.69 to 8 Sols/s. Is this quite low for this configuration or is it just about the speed that one can get with this config ?
Any pointers are appreciated.
I had 256H/s for my RX 480 8GB now it's at 286H/s, massive improvement for these cards. (It is overclocked to 1370/2250.)
How is possible so many overclocking? I have 6 x SAPPHIRE RX480 OC + 8 Gb (default clock is 1342/2000 MHz) and overclock with the GPU power +0 freezes my computer. At 2100 MHZ of memory is stable only a few hours. Which graphics card you have and which OC software do you use?
Its like that when you listen some freaks from bench forum and put 6x 480 on ~1000w PSU
Hi guys. I have been using 9.2 on two rigs and as 01.01.2017 when the rig restarts by some reason I'm getting this weird freeze of the miner. It hangs after "POOL version". Unfortunately when i'm not around to see that it will stay like this for hours. I use Nicehash pool. This happens once in a while on both rigs. What could be the problem - pool, miner or rig system?
Government, why do not you use version 10 because it has better performance? Your problem may be the result of excessive overclocking or too downvolt. Try to reduce the clock (if you are overclocking ) or increase the voltage.Switching to v10 is a valid point
I will do that. I was just curious if anyone else had such issue. I run RX 480 8G NITRO+ OC with slight adjustments: core clock 1250, memory clock 2125. Everything else is stock. The interesting thing is that this problem started this year.Thanks and regards!
Hi guys. I have been using 9.2 on two rigs and as 01.01.2017 when the rig restarts by some reason I'm getting this weird freeze of the miner. It hangs after "POOL version". Unfortunately when i'm not around to see that it will stay like this for hours. I use Nicehash pool. This happens once in a while on both rigs. What could be the problem - pool, miner or rig system?
Government, why do not you use version 10 because it has better performance? Your problem may be the result of excessive overclocking or too downvolt. Try to reduce the clock (if you are overclocking ) or increase the voltage.V 10 ...rx 470 4gb
243h/s
what are your setting? I only get 233 h/s for sapphire rx 470 4gb243h/s
Gpu clock
1250
memory clock
1750
-75mv
245h/s
MY mined zcash in this pool...best pool in my idea
This link SING IN in pool
https://minergate.com/a/e172e848728edd0d2b97b9b5
Hi guys. I have been using 9.2 on two rigs and as 01.01.2017 when the rig restarts by some reason I'm getting this weird freeze of the miner. It hangs after "POOL version". Unfortunately when i'm not around to see that it will stay like this for hours. I use Nicehash pool. This happens once in a while on both rigs. What could be the problem - pool, miner or rig system?
v10
280x ~230 h/s a1
390 ~330 h/s a1
fury ~385-390 h/s a2
480 ~275-282 h/s a2
my 290x is hitting ~319 h/s in v9.3 ......at v10 it is only ~314 h/s at a1 algorithm
question:
how can i set different -a option in a rig with different cards? i want a1 for my 280x and a2 for my 480 in the same rig.
Readme.txt!!!280x ~230 h/s a1
390 ~330 h/s a1
fury ~385-390 h/s a2
480 ~275-282 h/s a2
my 290x is hitting ~319 h/s in v9.3 ......at v10 it is only ~314 h/s at a1 algorithm
question:
how can i set different -a option in a rig with different cards? i want a1 for my 280x and a2 for my 480 in the same rig.
-a algoritm selection. Possible values: 0..3. 0 - autodetect. You can also specify values for every card, for example "-a 0,3,1". Default value is "0".
v10
hd7950 1100/1500 225-230
hd7850 1100/1350 145-150
hd7950 1100/1500 225-230
hd7850 1100/1350 145-150
V10
Sapphire rx470 nitro+ 4gb timingmod, c1285/m1900, cv-96/pl+50, -a 2, 250 sol +/- 2-3. Not bad. Imho.
Sapphire rx470 nitro+ 4gb timingmod, c1285/m1900, cv-96/pl+50, -a 2, 250 sol +/- 2-3. Not bad. Imho.
v10
R7 370OC 4GB
1175/1500
153 H/s
R7 370OC 4GB
1175/1500
153 H/s
I had 256H/s for my RX 480 8GB now it's at 286H/s, massive improvement for these cards. (It is overclocked to 1370/2250.)
How is possible so many overclocking? I have 6 x SAPPHIRE RX480 OC + 8 Gb (default clock is 1342/2000 MHz) and overclock with the GPU power +0 freezes my computer. At 2100 MHZ of memory is stable only a few hours. Which graphics card you have and which OC software do you use?
v10
280x ~230 h/s a1
390 ~330 h/s a1
fury ~385-390 h/s a2
480 ~275-282 h/s a2
my 290x is hitting ~319 h/s in v9.3 ......at v10 it is only ~314 h/s at a1 algorithm
question:
how can i set different -a option in a rig with different cards? i want a1 for my 280x and a2 for my 480 in the same rig.
280x ~230 h/s a1
390 ~330 h/s a1
fury ~385-390 h/s a2
480 ~275-282 h/s a2
my 290x is hitting ~319 h/s in v9.3 ......at v10 it is only ~314 h/s at a1 algorithm
question:
how can i set different -a option in a rig with different cards? i want a1 for my 280x and a2 for my 480 in the same rig.
My results (v9.2 -> v10: rx 380 160 -> 165
rx 480 260 -> 255 not good
rx 480 260 -> 255 not good
Jump to: