Anybody ever had any luck getting old Cayman (6950, 6970) cards to work with this?
I tried under Ubuntu 16.04 and ran into an OpenCL wall, the AMD drivers only work up to 14.04 and the open source drivers don't support the older cards.
I tried under Win7 and the cards got hot, but just returned incorrect data to the pool.
Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 26. (Read 3839201 times)
hi
i have gtx1070
is possible mine zclassic with claymore or not ?
i not found tool for mine zclassic with nvidia gpu gtx1070
any freind can help me and give me address for nvidia gpu mine tool?
bet regard
it is impossible, claymore's Zcash miner do not support nVidia cards i have gtx1070
is possible mine zclassic with claymore or not ?
i not found tool for mine zclassic with nvidia gpu gtx1070
any freind can help me and give me address for nvidia gpu mine tool?
bet regard
You should use EWBF miner for ZCL or ZEC.
Hello guys.
I am new to crypto mining.
Some time after start up of miner (usually after 3 to 7 shares have been received), I get the following error: "WATCHDOG: GPU 0 hangs in OpenCL call, exit"
I have never seen the GPU temp. go over 76deg.C and fan power is around 55%, however, just before the error GPU temp. and fan speed goes down considerably indicating a long lasting stall.
I have tried both versions 12.6 and 12.5 of the miner with the same result.
The initialization parameters are as follows:
setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
ZecMiner64.exe -zpool ssl://zec-eu1.nanopool.org:6633 -zwal xx.yy/mm@mm -zpsw z -ftime 2
The hardware is ATI RADEON R9 380 with 4 GB of memory running on Crimson 17.1.1 .
Any insight would be appreciated.
Regards,
I am new to crypto mining.
Some time after start up of miner (usually after 3 to 7 shares have been received), I get the following error: "WATCHDOG: GPU 0 hangs in OpenCL call, exit"
I have never seen the GPU temp. go over 76deg.C and fan power is around 55%, however, just before the error GPU temp. and fan speed goes down considerably indicating a long lasting stall.
I have tried both versions 12.6 and 12.5 of the miner with the same result.
The initialization parameters are as follows:
setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
ZecMiner64.exe -zpool ssl://zec-eu1.nanopool.org:6633 -zwal xx.yy/mm@mm -zpsw z -ftime 2
The hardware is ATI RADEON R9 380 with 4 GB of memory running on Crimson 17.1.1 .
Any insight would be appreciated.
Regards,
hi
i have gtx1070
is possible mine zclassic with claymore or not ?
i not found tool for mine zclassic with nvidia gpu gtx1070
any freind can help me and give me address for nvidia gpu mine tool?
bet regard
as far as I'm aware he hasn't added Nvidia support yet, so I'm using ewbf's miner for my gtx 1070 and 1080, not yet aware of any better. i have gtx1070
is possible mine zclassic with claymore or not ?
i not found tool for mine zclassic with nvidia gpu gtx1070
any freind can help me and give me address for nvidia gpu mine tool?
bet regard
hi
i have gtx1070
is possible mine zclassic with claymore or not ?
i not found tool for mine zclassic with nvidia gpu gtx1070
any freind can help me and give me address for nvidia gpu mine tool?
bet regard
i have gtx1070
is possible mine zclassic with claymore or not ?
i not found tool for mine zclassic with nvidia gpu gtx1070
any freind can help me and give me address for nvidia gpu mine tool?
bet regard
Hello guyz,
Can i dual mine zcash and zencash? GTX 1070
Never tried like that. I think it will be a trouble. But you can try and tell us Can i dual mine zcash and zencash? GTX 1070
) No Linux version planned anymore.
YES!!!! THANK YOU!!!
My 280x are doing ~330-335 sol/s (Claymore v12.5), temp. is about 60-65C, fans at 40-45%, undervolted a little bit from 1.256 to 1.15, drawing from the wall aprox. 220W per card. You can undervolt your 280x more, but I don't care about electricity bills too much, so 220w is ok for me.
To undervolt my 280x I have used VBE and ATIFlash, just google it, there are a lot of articales about downvolting.
Tahiti's are undervolted like a charm with msi afterburner. No need to mess with bios ... To undervolt my 280x I have used VBE and ATIFlash, just google it, there are a lot of articales about downvolting.
Hello, dear friends!
Ive got several 280Xs mining Zcash for a long time. All are memory strapped , doing ~300 sols/s.
But now think of making them a little bit colder and quiter.
Could you plz point me for some manual of doing this ( i think undervolting or somethig) ?
Best Regards.
Ive got several 280Xs mining Zcash for a long time. All are memory strapped , doing ~300 sols/s.
But now think of making them a little bit colder and quiter.
Could you plz point me for some manual of doing this ( i think undervolting or somethig) ?
Best Regards.
Any advice please ?
To undervolt my 280x I have used VBE and ATIFlash, just google it, there are a lot of articales about downvolting.
Hello, dear friends!
Ive got several 280Xs mining Zcash for a long time. All are memory strapped , doing ~300 sols/s.
But now think of making them a little bit colder and quiter.
Could you plz point me for some manual of doing this ( i think undervolting or somethig) ?
Best Regards.
Ive got several 280Xs mining Zcash for a long time. All are memory strapped , doing ~300 sols/s.
But now think of making them a little bit colder and quiter.
Could you plz point me for some manual of doing this ( i think undervolting or somethig) ?
Best Regards.
Any advice please ?
Hello, dear friends!
Ive got several 280Xs mining Zcash for a long time. All are memory strapped , doing ~300 sols/s.
But now think of making them a little bit colder and quiter.
Could you plz point me for some manual of doing this ( i think undervolting or somethig) ?
Best Regards.
Ive got several 280Xs mining Zcash for a long time. All are memory strapped , doing ~300 sols/s.
But now think of making them a little bit colder and quiter.
Could you plz point me for some manual of doing this ( i think undervolting or somethig) ?
Best Regards.
Any advice please ?
can support Fiji cards, for driver 17.1.1 ?
For Fiji, it is better to use 16.3.2.
so I figured mine out, posting up to possibly help others
Near as I can tell that config file does fuck all, doesn't matter what you put in it or not. Anything you DO put in it will just scroll past in red as an "unknown option" at launch.
What you DO need to modify, and doesn't seem to be in any of the tutorials, is the "epools" file.
uncomment the line for your pool of choice and fill in your personal bits (login.worker and password) and BANG (don't forget to create your worker at the pool first)
then open all your windows and doors because it's going to get hot in your room.
Near as I can tell that config file does fuck all, doesn't matter what you put in it or not. Anything you DO put in it will just scroll past in red as an "unknown option" at launch.
What you DO need to modify, and doesn't seem to be in any of the tutorials, is the "epools" file.
uncomment the line for your pool of choice and fill in your personal bits (login.worker and password) and BANG (don't forget to create your worker at the pool first)
then open all your windows and doors because it's going to get hot in your room.
I'm having some weird issues with latest versions - the application occasionally crashes in Win10. While running 12.2 it hashes at the same rate and doesn't crash...
The rig is a mixed bunch of 4*470 and a single 370(in slot)
The rig is a mixed bunch of 4*470 and a single 370(in slot)
From zcash flypool it says
What address then we enter in claymore?
Quote
Because of performance issues with the Zcash client we are unable to send payout transactions to z addresses! Therefore DO NOT use z addresses to mine on the pool.
What address then we enter in claymore?
you should use t addresses.
Announce about z addresses made some where in OCT or NOV 2016, so it's truly shouldn't care you. Nowadays all are using t addresses of ZEC.
I use t address and pay directly into altcoin exchange without problem.
From zcash flypool it says
What address then we enter in claymore?
Quote
Because of performance issues with the Zcash client we are unable to send payout transactions to z addresses! Therefore DO NOT use z addresses to mine on the pool.
What address then we enter in claymore?
you should use t addresses.
Announce about z addresses made some where in OCT or NOV 2016, so it's truly shouldn't care you. Nowadays all are using t addresses of ZEC.
can support Fiji cards, for driver 17.1.1 ?
From zcash flypool it says
What address then we enter in claymore?
Quote
Because of performance issues with the Zcash client we are unable to send payout transactions to z addresses! Therefore DO NOT use z addresses to mine on the pool.
What address then we enter in claymore?
did you tried reinstall drivers or to try older one?
Does mining starts without environment variables? It should work without it.
no, I was really hoping to NOT have to roll my drivers back, like, 6 versions, in fact I don't think I will, just not worth it
and, no, it says no pool specified
My apologies if this is an old or common question...741 pages in this thread man
GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100
ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal ...etc
I just get a red list of "unknown options"
now, I game also so I am running newer drivers, 16.6 to be precise, will this really not work? or have I missed something?
GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100
ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal ...etc
I just get a red list of "unknown options"
now, I game also so I am running newer drivers, 16.6 to be precise, will this really not work? or have I missed something?
Try next one:
set GPU_FORCE_64BIT_PTR=0
set GPU_MAX_HEAP_SIZE=100
set GPU_USE_SYNC_OBJECTS=1
set GPU_MAX_ALLOC_PERCENT=100
set GPU_SINGLE_ALLOC_PERCENT=100
Thanks for the reply, but no luck. I tried adding both set and setx, all it does is double the number of unknown options eg.
UNKNOWN OPTION setx
UNKNOWN OPTION GPU_FORCE_64BIT_PTR=0
etc
any other ideas?
did you tried reinstall drivers or to try older one?
Does mining starts without environment variables? It should work without it.
Jump to: