Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 30.

Munhenhos

member

Activity: 72

Merit: 10

Quote from: jhondoe123 on September 11, 2017, 02:24:14 PM

hi

i'm a newbie to this.

just started mining and have newbie question

when i was mining ethereum (same set, same gpu's, same everything) i was getting 26 Mh/s

now i'm mining zcash (same set, same gpu's, same everything) i'm getting 600 H/s

can some one explain it

thanks

https://whattomine.com check this. Different coins/algorithms different hash rates.

jhondoe123

newbie

Activity: 1

Merit: 0

hi

i'm a newbie to this.

just started mining and have newbie question

when i was mining ethereum (same set, same gpu's, same everything) i was getting 26 Mh/s

now i'm mining zcash (same set, same gpu's, same everything) i'm getting 600 H/s

can some one explain it

thanks

CitricAcid

newbie

Activity: 60

Merit: 0

Quote from: newontheblock on September 03, 2017, 04:45:03 PM

hi guys.

sry i'm a newbie to this.
have tried to get the "Claymore's ZCash AMD GPU Miner v12.6" running on my win10 machine just for testing with following options:

GPU_FORCE_64BIT_PTR 1
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

ZecMiner64.exe -zpool ssl://eu1-zcash.flypool.org:3443 -zwal waaletIDY.test -zpsw x -i 3

but it only says unknown options and unspezified pool.

can you please give me a hint.

i'm having a geforce 920M if it helps to resolve the issue.

thanks

Mining on a laptop is not recommended.

fapar

sr. member

Activity: 1414

Merit: 270

Undeads.com - P2E Runner Game

Quote from: Xising on September 11, 2017, 02:31:08 AM

Quote from: fapar on September 10, 2017, 01:08:54 PM

Quote from: shadabahmed on September 08, 2017, 03:38:46 PM

is block chain driver good for this miner or old crimson drivers??

Difference is not noticed. On my RX480 310-315 h/s

I will use the old drivers. At least I can control the voltage etc.

Yes, I'm just saying that the hashrate did not change when using the blockchain-driver.
OverdriveNTool work with last AMD drivers.

Xising

sr. member

Activity: 910

Merit: 257

Quote from: fapar on September 10, 2017, 01:08:54 PM

Quote from: shadabahmed on September 08, 2017, 03:38:46 PM

is block chain driver good for this miner or old crimson drivers??

Difference is not noticed. On my RX480 310-315 h/s

I will use the old drivers. At least I can control the voltage etc.

fapar

sr. member

Activity: 1414

Merit: 270

Undeads.com - P2E Runner Game

Quote from: shadabahmed on September 08, 2017, 03:38:46 PM

is block chain driver good for this miner or old crimson drivers??

Difference is not noticed. On my RX480 310-315 h/s

Saidasun

sr. member

Activity: 334

Merit: 275

Quote from: Ursul0 on September 09, 2017, 03:03:55 AM

Quote from: shadabahmed on September 08, 2017, 03:38:46 PM

is block chain driver good for this miner or old crimson drivers??

You can use any driver with this miner... The latest 12.6 version works with the new API of "amd blockchain beta" driver, however there may be some issues with voltages and stuff... so if you have older polaris cards you may opt for something like 16.11.4 with no bios sig check and watttool fully working

That is right. I use the old drivers such as 15.12 or 16.9.2 for ZEC mining.

Ursul0

sr. member

Activity: 857

Merit: 262

Quote from: shadabahmed on September 08, 2017, 03:38:46 PM

is block chain driver good for this miner or old crimson drivers??

You can use any driver with this miner... The latest 12.6 version works with the new API of "amd blockchain beta" driver, however there may be some issues with voltages and stuff... so if you have older polaris cards you may opt for something like 16.11.4 with no bios sig check and watttool fully working

shadabahmed

hero member

Activity: 616

Merit: 500

is block chain driver good for this miner or old crimson drivers??

kiaas

jr. member

Activity: 42

Merit: 12

Quote from: Grundy3D on August 30, 2017, 08:11:19 AM

This thread is huge so my issue might already have a solution. I configured this version for my HD 5700 1GB. I know it's old and not that powerful, but it's what I have for now. When I start it, everything looks good until the starts actually attempting to mine, I am getting an error message saying GPU #0 returned incorrect data: random 6 characters in all red. Tried rebooting, clean uninstall of drivers, reinstall latest AMD drivers, tried 15.12 drivers (weren't compatible with my video card) still not working. Anyone else see this and/or have a fix?

not sure if anyone replied to you yet, but I've not had any luck with getting 5000 series cards to work with zec, keccak and cryptonight are all I've had working, but claymores cryptonight miner was a bit buggy and he doesn't maintain it anymore for some reason, Keccak was going about break even earning on my 5670.

rospotrebpozor

newbie

Activity: 8

Merit: 0

Quote from: Usainbot on September 08, 2017, 02:34:12 AM

Quote from: rospotrebpozor on September 07, 2017, 09:54:08 PM

Quote from: dooferorg on September 06, 2017, 09:59:34 PM

What hashrate are you getting with the 460 cards?

519 h/s

Not possible with single 460 cards.

x4 cards

KernowKing

newbie

Activity: 2

Merit: 0

Quote from: rospotrebpozor on September 07, 2017, 10:40:39 PM

Quote from: KernowKing on September 07, 2017, 08:12:30 AM

Hi all

I am having problems with one of my rigs and need some help. I am not new to mining, nor to this thread (just never needed to post before), but I certainly won't pretend to be an expert either. The rig I have an issue with (runs 3 x Sapphire Nitro+ 480 and 1 x 470) has been running well for about 7 months or so. It was running on V12.5 without any issue, however it crashed the other day and hasn't worked correctly since. The machine runs fine, Claymores V12.5 and V12.6 are both acting the same, when I start mining it recognises all the cards etc but then it mainly lists incorrect data, line after line. Please see the screenshot.
Is someone able to point me to the route of the problem?

Thank you

https://i.imgur.com/7H4bjvr.png

identify gpu3 and test it separately.

Ok - thank you

Usainbot

newbie

Activity: 29

Merit: 0

Quote from: rospotrebpozor on September 07, 2017, 09:54:08 PM

Quote from: dooferorg on September 06, 2017, 09:59:34 PM

What hashrate are you getting with the 460 cards?

519 h/s

Not possible with single 460 cards.

rospotrebpozor

newbie

Activity: 8

Merit: 0

Quote from: KernowKing on September 07, 2017, 08:12:30 AM

Hi all

I am having problems with one of my rigs and need some help. I am not new to mining, nor to this thread (just never needed to post before), but I certainly won't pretend to be an expert either. The rig I have an issue with (runs 3 x Sapphire Nitro+ 480 and 1 x 470) has been running well for about 7 months or so. It was running on V12.5 without any issue, however it crashed the other day and hasn't worked correctly since. The machine runs fine, Claymores V12.5 and V12.6 are both acting the same, when I start mining it recognises all the cards etc but then it mainly lists incorrect data, line after line. Please see the screenshot.
Is someone able to point me to the route of the problem?

Thank you

https://i.imgur.com/7H4bjvr.png

identify gpu3 and test it separately.

rospotrebpozor

newbie

Activity: 8

Merit: 0

Quote from: dooferorg on September 06, 2017, 09:59:34 PM

What hashrate are you getting with the 460 cards?

519 h/s

KernowKing

newbie

Activity: 2

Merit: 0

Hi all

I am having problems with one of my rigs and need some help. I am not new to mining, nor to this thread (just never needed to post before), but I certainly won't pretend to be an expert either. The rig I have an issue with (runs 3 x Sapphire Nitro+ 480 and 1 x 470) has been running well for about 7 months or so. It was running on V12.5 without any issue, however it crashed the other day and hasn't worked correctly since. The machine runs fine, Claymores V12.5 and V12.6 are both acting the same, when I start mining it recognises all the cards etc but then it mainly lists incorrect data, line after line. Please see the screenshot.
Is someone able to point me to the route of the problem?

Thank you

https://i.imgur.com/7H4bjvr.png

YIz

hero member

Activity: 686

Merit: 502

The hashrate has dropped a bit on the latest version using Fiji chips. Is it normal or should I consider switching over to Vega?

dooferorg

full member

Activity: 163

Merit: 100

Quote from: rospotrebpozor on September 03, 2017, 07:02:18 PM

I have RX460 2GB x4 GPU, mobo GA-880G-UD3H, windows 10 pr3.
I DL latest drivers.

What hashrate are you getting with the 460 cards?

Ursul0

sr. member

Activity: 857

Merit: 262

Quote from: dumada on September 04, 2017, 01:02:33 AM

Quote from: rospotrebpozor on September 04, 2017, 12:04:13 AM

Quote from: johiro on September 03, 2017, 11:31:55 PM

Are you using driver 16.12.2?
For 4xx cards (Polaris) Crimson 16.12.2 is recommended.

I'm using latest driver.
for 5 hours so far working well.
Except for temp/fan RDP malfunctioning.

Is there any speed up in the latest driver?

top speeds for polaris reached around ver 11 or so...

16.10.4 is better for 4xx as it doesn't require bios signature patch and also one of the few versions that have no issues with accidental 100% fan on various miners(weird, but true) running Cryptonight kernels...

Bwtmn7

member

Activity: 109

Merit: 10

claymore do you think you can add R9 FURY +mixed GPUs to allow zcash mining with a driver newer than 16.3.2 the 16.3.2 is just too bad doesnt allow undervolting doesnt performs well in games at all, the lack of control on this driver sucks. if you could add support for at leats 16.8.1 or 16.8.2 or Blockchain driver it would be the ebst thing you havent supported for Fiji since you added it to the miner

Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 30. (Read 3839201 times)