Only 235 - Rx 480 nitro on v9.3
On v9.2 -257
On v9.2 -257
I see same hashrate 235H/s on stock RX480 on both v9.2 and v9.3, drivers 16.11.3.
Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 274. (Read 3839163 times)
I see same hashrate 235H/s on stock RX480 on both v9.2 and v9.3, drivers 16.11.3.
Only 235 - Rx 480 nitro on v9.3
On v9.2 -257
On v9.2 -257
v9.3:
- improved stability and compatibility with various drivers.
- slightly improved mining speed for some cards (1-2%). About 340H/s on stock 390X.
- fixed issue in Linux version with GPU SEGFAULT and high CPU load.
- added support for round robin DNS.
- some bug fixes and minor improvements.
- improved stability and compatibility with various drivers.
- slightly improved mining speed for some cards (1-2%). About 340H/s on stock 390X.
- fixed issue in Linux version with GPU SEGFAULT and high CPU load.
- added support for round robin DNS.
- some bug fixes and minor improvements.
Thanks for the new version.
What is the normal hashrate for r9 280x GPU on linux?
I get 207H/s from my 280x GPU's. is that normal or should I tweak more?
I'm curious about something here. I've been mining on flypool and I saw this: (there is a bar missing between 4 and 6 AM)
http://imgur.com/a/PRvPx
There was mining activity between 4 and 6 AM. why does it not show the amount of valid and invalid shares?
Is there something wrong on my end, or is it a bug at flypool?
this kidoshttp://imgur.com/a/PRvPx
There was mining activity between 4 and 6 AM. why does it not show the amount of valid and invalid shares?
Is there something wrong on my end, or is it a bug at flypool?
Keep your comment to yourself if you can't say anything that makes sence...Got nothing else better to do, kiddo?
These 2 sentences would make more sense if you just encrypted them and post them (without the decryption key)
Or to rephrase...there is no translator that can turn this post into English...
GTCG: It's not your end and its not a bug. It just means that during 5 AM no blocks were found in that pool
There are better pools than flypool though....
Thank you for a comprehensive comment. Will switch over to dwarfpool and see what it gives.
I think Zoryk is on funny stuff
v9.3:
- improved stability and compatibility with various drivers.
- slightly improved mining speed for some cards (1-2%). About 340H/s on stock 390X.
- fixed issue in Linux version with GPU SEGFAULT and high CPU load.
- added support for round robin DNS.
- some bug fixes and minor improvements.
- improved stability and compatibility with various drivers.
- slightly improved mining speed for some cards (1-2%). About 340H/s on stock 390X.
- fixed issue in Linux version with GPU SEGFAULT and high CPU load.
- added support for round robin DNS.
- some bug fixes and minor improvements.
New year discount!
I would delete it even if You send it for free. If You don't believe what I'm talking about: --no-fee is free and I'm not using it.
oh you, such a liar
I'm curious about something here. I've been mining on flypool and I saw this: (there is a bar missing between 4 and 6 AM)
http://imgur.com/a/PRvPx
There was mining activity between 4 and 6 AM. why does it not show the amount of valid and invalid shares?
Is there something wrong on my end, or is it a bug at flypool?
this kidoshttp://imgur.com/a/PRvPx
There was mining activity between 4 and 6 AM. why does it not show the amount of valid and invalid shares?
Is there something wrong on my end, or is it a bug at flypool?
Keep your comment to yourself if you can't say anything that makes sence...Got nothing else better to do, kiddo?
These 2 sentences would make more sense if you just encrypted them and post them (without the decryption key)
Or to rephrase...there is no translator that can turn this post into English...
GTCG: It's not your end and its not a bug. It just means that during 5 AM no blocks were found in that pool
There are better pools than flypool though....
I'm curious about something here. I've been mining on flypool and I saw this: (there is a bar missing between 4 and 6 AM)
http://imgur.com/a/PRvPx
There was mining activity between 4 and 6 AM. why does it not show the amount of valid and invalid shares?
Is there something wrong on my end, or is it a bug at flypool?
this kidoshttp://imgur.com/a/PRvPx
There was mining activity between 4 and 6 AM. why does it not show the amount of valid and invalid shares?
Is there something wrong on my end, or is it a bug at flypool?
Keep your comment to yourself if you can't say anything that makes sence...Got nothing else better to do, kiddo?
I have a problem running claymore's zcash when I run it on stock rig crash and I have to reboot it manually and I have to make the GPU -15% at least (sometimes -20%) but when running claymore's ETH it work great even if I overclock the memory to 2150
I have the following rig:
Mobo: MSI 870s
Processor: AMD FX 4100
RAM: 4GB
GPU: 2x sapphire nitro rx 480
HDD: 160GB SATA (old one and making a lot of noise)
PSU: Zalman ZM500-GV
OS: Windows 7
Driver:16.11.4
I have the following rig:
Mobo: MSI 870s
Processor: AMD FX 4100
RAM: 4GB
GPU: 2x sapphire nitro rx 480
HDD: 160GB SATA (old one and making a lot of noise)
PSU: Zalman ZM500-GV
OS: Windows 7
Driver:16.11.4
I'm curious about something here. I've been mining on flypool and I saw this: (there is a bar missing between 4 and 6 AM)
http://imgur.com/a/PRvPx
There was mining activity between 4 and 6 AM. why does it not show the amount of valid and invalid shares?
Is there something wrong on my end, or is it a bug at flypool?
this kidoshttp://imgur.com/a/PRvPx
There was mining activity between 4 and 6 AM. why does it not show the amount of valid and invalid shares?
Is there something wrong on my end, or is it a bug at flypool?
Keep your comment to yourself if you can't say anything that makes sence...Got nothing else better to do, kiddo?
I'm curious about something here. I've been mining on flypool and I saw this: (there is a bar missing between 4 and 6 AM)
http://imgur.com/a/PRvPx
There was mining activity between 4 and 6 AM. why does it not show the amount of valid and invalid shares?
Is there something wrong on my end, or is it a bug at flypool?
this kidos http://imgur.com/a/PRvPx
There was mining activity between 4 and 6 AM. why does it not show the amount of valid and invalid shares?
Is there something wrong on my end, or is it a bug at flypool?
I'm curious about something here. I've been mining on flypool and I saw this: (there is a bar missing between 4 and 6 AM)
http://imgur.com/a/PRvPx
There was mining activity between 4 and 6 AM. why does it not show the amount of valid and invalid shares?
Is there something wrong on my end, or is it a bug at flypool?
http://imgur.com/a/PRvPx
There was mining activity between 4 and 6 AM. why does it not show the amount of valid and invalid shares?
Is there something wrong on my end, or is it a bug at flypool?
Why is this message appearing?
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
too much OC!!
what does that mean? Does it interfere with mining in any way?
most likely you are running the GPU with too high temps and needs the processors to be resealed. Low voltage can do it too. Reset the GPU to the default values and see whats happens. If it continues under clock it. How old is the GPU? Also how many GPU's are on the motherboard and power supply do you have?
Is already in the default value but the error still persists.
I have 3 GPU and 3 more power supply one 600 power color shocker and 2 corsair cx 500.
You need to reduce the intensity if it is not overclocked. Some GPU cannot have high intensity.
AMD FX-8350
Why is this ? where 3 cards are available separately r9 390 - 315 h / s and if you add r9 390X and 290x, only 5 cards are beginning to give out r9 390 - 295 h / s, who can say? The difference of 20 h / s .thanks
Maybe your CPU is too weak.
New year discount!
I would delete it even if You send it for free. If You don't believe what I'm talking about: --no-fee is free and I'm not using it.
Why is this ? where 3 cards are available separately r9 390 - 315 h / s and if you add r9 390X and 290x, only 5 cards are beginning to give out r9 390 - 295 h / s, who can say? The difference of 20 h / s .thanks
Catalyst (Crimson) 15.12 is required for best performance and compatibility. You can get very bad results for different drivers version, or miner can fail on startup.
For me this was not true, it was the crimson 15.12 drivers causing the miner to crash. I'd tried every troubleshooting trick in the readme to no avail and even asked in these forums, nothing worked. If your miner is crashing or If you are having stability issues update to the latest relive drivers from AMD.
I was really confused on this one because I have two identical Optiplex 390 machines, both running windows 10 pro, both with newest A11 bios, both with onboard video enabled too, both with 8 gb of ram, and both with R9 fury's in them. One has been running flawless for almost a month and the other wouldn't run at all. I'm sure I used the 15.12 drivers on the machine that was working when I set it up, but that was in the earlier days of claymore (9.0) and I must have left the automatic driver update option checked. Some change made between 9.0 and 9.2 causes issues with the 15.12 drivers on certain rigs.
Just to be thorough I removed the newest drivers on the optiplex that has been working and installed the 15.12 drivers and zecminer64 would crash right after card detection every time. Updated to newest drivers with clean install option and it's working again.
How does a GTX 1060 3GB beat my RX 480 with this algo by 20sol/s?
My RX 480 gets ~230 range 228 - 237 and my GTX 1060 3GB gets ~250 range 244 - 258
My RX 480 gets ~230 range 228 - 237 and my GTX 1060 3GB gets ~250 range 244 - 258
lots of reasons have been discussed. Simple answer would be look at the base core clock for both cards. 1060 is higher.
Jump to: