Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 275.

wll1rah

full member

Activity: 209

Merit: 100

How does a GTX 1060 3GB beat my RX 480 with this algo by 20sol/s?
My RX 480 gets ~230 range 228 - 237 and my GTX 1060 3GB gets ~250 range 244 - 258

wll1rah

full member

Activity: 209

Merit: 100

Quote from: igorsantos on December 30, 2016, 12:06:30 AM

Quote from: rpg on December 29, 2016, 11:28:35 PM

Quote from: igorsantos on December 29, 2016, 09:18:21 PM

Quote from: maxmad_x on December 29, 2016, 08:28:01 PM

Quote from: igorsantos on December 29, 2016, 08:06:09 PM

Why is this message appearing?

GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
Huh

too much OC!!

what does that mean? Does it interfere with mining in any way?

most likely you are running the GPU with too high temps and needs the processors to be resealed. Low voltage can do it too. Reset the GPU to the default values and see whats happens. If it continues under clock it. How old is the GPU? Also how many GPU's are on the motherboard and power supply do you have?

Is already in the default value but the error still persists.
I have 3 GPU and 3 more power supply one 600 power color shocker and 2 corsair cx 500.

Isolate everything by only having minimum components
so, only one keyboard & mouse; monitor, memory module, CPU, 1 GPU, your 600W power supply, motherboard, & SSD or HD
Also remove any risers from system
then turn and attempt to mine. turn off system
If it works than add another GPU with or without the riser and test again
If it works then add another GPU with or without the riser and test again, however if it failed then your issue is most likely power.
You'll need to get a dual power supply adapter and either use the 600W with the 500W power supply or use both 500W power supplies
using things like flash drives, USB 3.0/3.1, in place of HD or even SSD's, DDR3L/ DDR4 will help as well with saving power to the rest of the system.
Another thing to remember to is that you should only have the 500W power supplies only supplying about 320W that includes the 20% that is lost due to inefficiency if it's and 80+ white label power supply.

maxmad_x

sr. member

Activity: 546

Merit: 250

It takes a lot to build but not much to lose

Quote from: igorsantos on December 30, 2016, 12:06:30 AM

Quote from: rpg on December 29, 2016, 11:28:35 PM

Quote from: igorsantos on December 29, 2016, 09:18:21 PM

Quote from: maxmad_x on December 29, 2016, 08:28:01 PM

Quote from: igorsantos on December 29, 2016, 08:06:09 PM

Why is this message appearing?

GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
Huh

too much OC!!

what does that mean? Does it interfere with mining in any way?

most likely you are running the GPU with too high temps and needs the processors to be resealed. Low voltage can do it too. Reset the GPU to the default values and see whats happens. If it continues under clock it. How old is the GPU? Also how many GPU's are on the motherboard and power supply do you have?

Is already in the default value but the error still persists.
I have 3 GPU and 3 more power supply one 600 power color shocker and 2 corsair cx 500.

use watttool; change P7 state in the left column to 1150mh (core) and ram to 1950 (MHz) to start. Change fan min speed t o more spped. and max fan speed to 100% capacity. Change the temeprature target to 80C.. Now run the miner. If you are still getting error then I cant help. But if there is no error; then slowly increase clock speed on both core and ram and keep an eye on temperature and power intake. This is just the start.. slowly optimize the card. have you done any bios modding? If yes; then you need to use polaris bios editor and decrease the clock status from the highest clock to 1200 or lower. (you can change it later in watttool).. play with it

igorsantos

member

Activity: 179

Merit: 10

Quote from: rpg on December 29, 2016, 11:28:35 PM

Quote from: igorsantos on December 29, 2016, 09:18:21 PM

Quote from: maxmad_x on December 29, 2016, 08:28:01 PM

Quote from: igorsantos on December 29, 2016, 08:06:09 PM

Why is this message appearing?

GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
Huh

too much OC!!

what does that mean? Does it interfere with mining in any way?

most likely you are running the GPU with too high temps and needs the processors to be resealed. Low voltage can do it too. Reset the GPU to the default values and see whats happens. If it continues under clock it. How old is the GPU? Also how many GPU's are on the motherboard and power supply do you have?

Is already in the default value but the error still persists.
I have 3 GPU and 3 more power supply one 600 power color shocker and 2 corsair cx 500.

rpg

hero member

Activity: 728

Merit: 500

Quote from: igorsantos on December 29, 2016, 09:18:21 PM

Quote from: maxmad_x on December 29, 2016, 08:28:01 PM

Quote from: igorsantos on December 29, 2016, 08:06:09 PM

Why is this message appearing?

GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
Huh

too much OC!!

what does that mean? Does it interfere with mining in any way?

most likely you are running the GPU with too high temps and needs the processors to be resealed. Low voltage can do it too. Reset the GPU to the default values and see whats happens. If it continues under clock it. How old is the GPU? Also how many GPU's are on the motherboard and power supply do you have?

igorsantos

member

Activity: 179

Merit: 10

Quote from: maxmad_x on December 29, 2016, 08:28:01 PM

Quote from: igorsantos on December 29, 2016, 08:06:09 PM

Why is this message appearing?

GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
Huh

too much OC!!

what does that mean? Does it interfere with mining in any way?

thehit101

newbie

Activity: 3

Merit: 0

does the miner store any data on the hard drive?

mamboOo

member

Activity: 76

Merit: 10

where is higher H/s ubuntu or windows? on RX 470 480 r9 390?

maxmad_x

sr. member

Activity: 546

Merit: 250

It takes a lot to build but not much to lose

Quote from: igorsantos on December 29, 2016, 08:06:09 PM

Why is this message appearing?

GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
Huh

too much OC!!

igorsantos

member

Activity: 179

Merit: 10

Why is this message appearing?

GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
GPU #0 returned incorrect data!
Huh

Knepala

sr. member

Activity: 504

Merit: 259

Ubuntu 16.04 RX 470 4GB

Non of the changes I make in cclock, powlim, ccddc seem to have any noticeable effect on my watt-meter or on the sol rates in the miner.
Only changing the intensity visibly changes both and tt and ttli are working fine.

Should I load or start the amdgpu-pro program first or something for claymore to be able to make changes?
Because of a bug in Lightdm and gdm not working either, since I installed the amd drivers, I'm just using command line. I can't get to the desktop to see the amd configuration program.

And just to be sure: using a negative number for powlim, lowers the maximum power usage for the cards, right? Or does a postive number equal a decrease?

shadabahmed

hero member

Activity: 616

Merit: 500

Quote from: manasd on December 29, 2016, 02:38:58 PM

Hi ALL
Which is the best anf fair pool?
and of course the more profitable (finding more blocks)

suprnova
flypool
nanopool
dwarfpool

from last 24 hour dwarf is best for me

i have 3 rigs
1in drarf
1in flypool
1in nanopool

rpg

hero member

Activity: 728

Merit: 500

Quote from: wedatin on December 29, 2016, 02:56:15 PM

Quote from: BenCodie on December 29, 2016, 02:15:17 PM

Quote from: rpg on December 29, 2016, 01:05:12 PM

Quote from: golden0707 on December 29, 2016, 10:49:26 AM

ZCASH Net diff 1.6M Shocked

big pump is coming

No pump
only dump lol Cheesy

The price is stable now. So pump might come later.

the huge price increase will happen when Alpha-bay starts accepting it, just like happen with monero. And I'm not taking into account the ramsonware guys starting to ask payment in zcash. Those miners selling now will kick themselves very hard you know where. Call me crazy but every coin I mine I'm booking it as $250.

wedatin

newbie

Activity: 58

Merit: 0