Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 302.

a7med918

newbie

Activity: 33

Merit: 0

hi all
i face unstable current effective hashrate any comment or adding in command line?

http://www.3rbz.com/uploads/50d1f8f731ee1.jpg

Linit

newbie

Activity: 13

Merit: 0

Quote from: Claymore on December 20, 2016, 10:20:29 AM

Another news: due to a lot of requests I got, finally I reconsidered my plans about Linux version, I will release it in a couple of days.

Thank you.

CODISMYLIFE

newbie

Activity: 27

Merit: 0

can you tell me about hashrate of rx 480 4gb in new claymore update?

iprotec

newbie

Activity: 2

Merit: 0

Can someone tell me how to setup my Claymore to solo mine? I know that I need to input my local IP 127.0.0.1 but how do I get it to reference the node to get work then post it when it is completed. I just do not know how to set up the command line correctly.

Also how to get the node to run in server mode?

This is much different than BTC server.

Thanks

Calvinpie

newbie

Activity: 20

Merit: 0

Quote from: FFI2013 on December 21, 2016, 04:42:27 PM

Quote from: Calvinpie on December 21, 2016, 03:25:49 PM

Quote from: FFI2013 on December 21, 2016, 01:38:25 PM

Quote from: dragonchopper9 on December 21, 2016, 01:24:44 PM

This is my observation of version 9.2 :
Rx 480 - 235 h/s
Rx 470 - 220 h/s
R9 390 - 300 h/s
R9 290 - 260 h/s
R9 280x - 215 H/s
Also, I have noticed a slight decrease in temperature.

could you please tell me your clocks for the 390 im only getting around 250 with stock clocks and i6 but im having problems with 15.12 drivers in win 10 what drivers do u use thank you for any info or help

I have 4 390's underclocked at 975/1500 with power limit at -5 and hashing between 296-300. Crimson 16.11.5. Wink

thats good everyone says 15.12 are the best but since i uninstalled 16.12 my rates have dropped i was using 16.9 for a while and had no issues ill have to go back thanks for the info

Pleasure bro! This rig is very unstable when overclocked!

FFI2013

hero member

Activity: 906

Merit: 507

Quote from: Calvinpie on December 21, 2016, 03:25:49 PM

Quote from: FFI2013 on December 21, 2016, 01:38:25 PM

Quote from: dragonchopper9 on December 21, 2016, 01:24:44 PM

This is my observation of version 9.2 :
Rx 480 - 235 h/s
Rx 470 - 220 h/s
R9 390 - 300 h/s
R9 290 - 260 h/s
R9 280x - 215 H/s
Also, I have noticed a slight decrease in temperature.

could you please tell me your clocks for the 390 im only getting around 250 with stock clocks and i6 but im having problems with 15.12 drivers in win 10 what drivers do u use thank you for any info or help

I have 4 390's underclocked at 975/1500 with power limit at -5 and hashing between 296-300. Crimson 16.11.5. Wink

thats good everyone says 15.12 are the best but since i uninstalled 16.12 my rates have dropped i was using 16.9 for a while and had no issues ill have to go back thanks for the info

shadabahmed

hero member

Activity: 616

Merit: 500

Quote from: dragonchopper9 on December 21, 2016, 01:24:44 PM

This is my observation of version 9.2 :
Rx 480 - 235 h/s
Rx 470 - 220 h/s
R9 390 - 300 h/s
R9 290 - 260 h/s
R9 280x - 215 H/s
Also, I have noticed a slight decrease in temperature.

is RX 470 4GB?
and which driver n OS u r using?
and clock settings too pls

Dannison

newbie

Activity: 27

Merit: 0

Quote from: Calvinpie on December 21, 2016, 03:25:49 PM

Quote from: FFI2013 on December 21, 2016, 01:38:25 PM

Quote from: dragonchopper9 on December 21, 2016, 01:24:44 PM

This is my observation of version 9.2 :
Rx 480 - 235 h/s
Rx 470 - 220 h/s
R9 390 - 300 h/s
R9 290 - 260 h/s
R9 280x - 215 H/s
Also, I have noticed a slight decrease in temperature.

could you please tell me your clocks for the 390 im only getting around 250 with stock clocks and i6 but im having problems with 15.12 drivers in win 10 what drivers do u use thank you for any info or help

I have 4 390's underclocked at 975/1500 with power limit at -5 and hashing between 296-300. Crimson 16.11.5. Wink

That is quite fast.

Calvinpie

newbie

Activity: 20

Merit: 0

Quote from: FFI2013 on December 21, 2016, 01:38:25 PM

Quote from: dragonchopper9 on December 21, 2016, 01:24:44 PM

This is my observation of version 9.2 :
Rx 480 - 235 h/s
Rx 470 - 220 h/s
R9 390 - 300 h/s
R9 290 - 260 h/s
R9 280x - 215 H/s
Also, I have noticed a slight decrease in temperature.

could you please tell me your clocks for the 390 im only getting around 250 with stock clocks and i6 but im having problems with 15.12 drivers in win 10 what drivers do u use thank you for any info or help

I have 4 390's underclocked at 975/1500 with power limit at -5 and hashing between 296-300. Crimson 16.11.5. Wink

Eisenkopf89

full member

Activity: 262

Merit: 101

Quote from: BenCodie on December 20, 2016, 02:33:43 PM

anyone using xfx r9 fury HBM
Please share their speeds

Thnx

I use a Gigabyte Fury X with stock clocking and Crimson 16.12.2 and the Version 9.2. It works with 367h/s.

Demarsac

sr. member

Activity: 504

Merit: 272

Quote from: Hotmetal on December 21, 2016, 07:17:43 AM

Thanks.. 5 x RX480's working with v9.2 without issues.

ZEC: GPU0 252.655 H/s, GPU1 250.847 H/s, GPU2 254.769 H/s, GPU3 253.092 H/s, GPU4 253.355

Same here with x6 RX480's 8Gb , average about 253 H/s

SparkIt

hero member

Activity: 714

Merit: 529

Quote from: usorin on December 21, 2016, 02:00:59 PM

Quote from: dragonchopper9 on December 21, 2016, 01:24:44 PM

This is my observation of version 9.2 :
Rx 480 - 235 h/s
Rx 470 - 220 h/s
R9 390 - 300 h/s
R9 290 - 260 h/s
R9 280x - 215 H/s
Also, I have noticed a slight decrease in temperature.

With R9 280x I'm getting ~220 H/s, I have some problem with R9 280 ( decrease in hashrate)

Try 1150/1700 -i 6, that gives me 230-235h/s with 280x

usorin

hero member

Activity: 1134

Merit: 500

Quote from: dragonchopper9 on December 21, 2016, 01:24:44 PM

This is my observation of version 9.2 :
Rx 480 - 235 h/s
Rx 470 - 220 h/s
R9 390 - 300 h/s
R9 290 - 260 h/s
R9 280x - 215 H/s
Also, I have noticed a slight decrease in temperature.

With R9 280x I'm getting ~220 H/s, I have some problem with R9 280 ( decrease in hashrate)

FFI2013

hero member

Activity: 906

Merit: 507

Quote from: dragonchopper9 on December 21, 2016, 01:24:44 PM

This is my observation of version 9.2 :
Rx 480 - 235 h/s
Rx 470 - 220 h/s
R9 390 - 300 h/s
R9 290 - 260 h/s
R9 280x - 215 H/s
Also, I have noticed a slight decrease in temperature.

could you please tell me your clocks for the 390 im only getting around 250 with stock clocks and i6 but im having problems with 15.12 drivers in win 10 what drivers do u use thank you for any info or help

alienmoney

newbie

Activity: 45

Merit: 0

Quote from: Biterion on December 21, 2016, 01:15:28 PM

Quote from: alienmoney on December 21, 2016, 12:12:37 PM

Please update the software, so that it works, with antminer pool, antpool, now does not work.

Link Pool:

https://www.antpool.com/

Thanks

Wink

lets you try this configuration:

example: ZecMiner64.exe -zpool stratum-zec.antpool.com:8899 -zwal yourZECaddress.YourWorkerID -zpsw 123

or edit your config file like this:

-zpool stratum-zec.antpool.com:8899
-zwal yourZECaddress.abc1
-zpsw 123

#1. dont forget to make your worker first at: https://www.antpool.com/user/workers.htm ===>> YourWorkerID = Worker Name
#2. specify your ZEC wallet to set your payout at: https://www.antpool.com/user/settings.htm
#3. Query earnings: https://www.antpool.com/zec.htm?wallet=Address or login to your Antpool account

Thanks .

dragonchopper9

sr. member

Activity: 361

Merit: 250

This is my observation of version 9.2 :
Rx 480 - 235 h/s
Rx 470 - 220 h/s
R9 390 - 300 h/s
R9 290 - 260 h/s
R9 280x - 215 H/s
Also, I have noticed a slight decrease in temperature.

Biterion

newbie

Activity: 38

Merit: 0

Quote from: alienmoney on December 21, 2016, 12:12:37 PM

Please update the software, so that it works, with antminer pool, antpool, now does not work.

Link Pool:

https://www.antpool.com/

Thanks

Wink

lets you try this configuration:

example: ZecMiner64.exe -zpool stratum-zec.antpool.com:8899 -zwal yourZECaddress.YourWorkerID -zpsw 123

or edit your config file like this:

-zpool stratum-zec.antpool.com:8899
-zwal yourZECaddress.abc1
-zpsw 123

#1. dont forget to make your worker first at: https://www.antpool.com/user/workers.htm ===>> YourWorkerID = Worker Name
#2. specify your ZEC wallet to set your payout at: https://www.antpool.com/user/settings.htm
#3. Query earnings: https://www.antpool.com/zec.htm?wallet=Address or login to your Antpool account

Latviand

full member

Activity: 1540

Merit: 219

Quote from: chrys on December 21, 2016, 12:32:59 PM

Ty for the miner.

Stock bios and no overclock:

asus r9 290 : 240 h/s ( 4x r9 290 rig - stabile)
r9 380x: 160 h/s ( 4x r9 380x rig - stabile)

The R9 290 could be faster if you use higher intensity.

chrys

newbie

Activity: 17

Merit: 0

Ty for the miner.

Stock bios and no overclock:

asus r9 290 : 240 h/s ( 4x r9 290 rig - stabile)
r9 380x: 160 h/s ( 4x r9 380x rig - stabile)

alienmoney

newbie

Activity: 45

Merit: 0

Quote from: ffthomas on December 21, 2016, 12:13:52 PM

Quote from: alienmoney on December 21, 2016, 12:12:37 PM

Please update the software, so that it works, with antminer pool, antpool, now does not work.

Link Pool:

[url]https://www.antpool.com/[/url

Thanks

Wink

Did you try using -allpool parameter?

I do not understand how to use that parameter, should I change username, just by the code?

Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 302. (Read 3839163 times)