Author

Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 301. (Read 3839163 times)

sr. member
Activity: 392
Merit: 250
Been mining with v9.1 so far it is stable, i also order this baby from ebayto try out because my MB has only 4 pci-e slots. so i got this to add more GPU!



The device card also uses the United States Pericom Pericom PI7C9X bridge chip, for switching PCI-E, PCI-E between.
But even USB 3.0, but also the theoretical bandwidth 5Gbps (625MB / s), one Into four Then remove the loss would only 150MB / s, and even PCI-E 1.x single-channel bandwidth also has 250MB / s, So this stuff more than enough to give you the best slots, there will not be enough bandwidth, not only for the performance requirements of the place. Therefore, the transferred PCI-E slot is the best version above 2.0, the 3.0 version is better.

See installation or you can Order here ->  Tongue  http://tinyurl.com/gmclx9n 
legendary
Activity: 1596
Merit: 1000
Claymore, feature request if I may..

Would it be possible to have ethman auto detect which of your clients is being used? Could have 3 fields in miner properties with ETH/ZEC/XMR speeds. I find myself switching between algorithms often so that would be handy.

Thanks
legendary
Activity: 977
Merit: 1011
It seems that v9.2 is more stable than v9.1 and v9.0. Good job Claymore!
legendary
Activity: 2800
Merit: 1012
Get Paid Crypto To Walk or Drive
How do I download Radeon software that is not the most current version.  When I go to their website, all I am able to find is the most current driver version.  I have google searched and found their webpage for 15.12, but there is no download link.
not supported by them anymore, use the 2nd match in google, or the 3rd or the 4th, its up to you. Wink

Ahh gotcha, so is it just a download from a 3rd party then?
Yes, I'm afraid, but I got it from Guru3D if I remember well, and my card haven't exploded this far.

HAHA good to know.  Thanks for your help.
sr. member
Activity: 644
Merit: 274
How do I download Radeon software that is not the most current version.  When I go to their website, all I am able to find is the most current driver version.  I have google searched and found their webpage for 15.12, but there is no download link.
not supported by them anymore, use the 2nd match in google, or the 3rd or the 4th, its up to you. Wink

Ahh gotcha, so is it just a download from a 3rd party then?
Yes, I'm afraid, but I got it from Guru3D if I remember well, and my card haven't exploded this far.
legendary
Activity: 3416
Merit: 1059
v9.2

280x    ~220H/s
390      ~325H/s
290x    ~315H/s
Fury     ~350H/s
480      ~260H/s

stock bios, overclocked, 16.10.3
legendary
Activity: 2800
Merit: 1012
Get Paid Crypto To Walk or Drive
How do I download Radeon software that is not the most current version.  When I go to their website, all I am able to find is the most current driver version.  I have google searched and found their webpage for 15.12, but there is no download link.
not supported by them anymore, use the 2nd match in google, or the 3rd or the 4th, its up to you. Wink

Ahh gotcha, so is it just a download from a 3rd party then?
sr. member
Activity: 644
Merit: 274
How do I download Radeon software that is not the most current version.  When I go to their website, all I am able to find is the most current driver version.  I have google searched and found their webpage for 15.12, but there is no download link.
not supported by them anymore, use the 2nd match in google, or the 3rd or the 4th, its up to you. Wink
legendary
Activity: 2800
Merit: 1012
Get Paid Crypto To Walk or Drive
How do I download Radeon software that is not the most current version.  When I go to their website, all I am able to find is the most current driver version.  I have google searched and found their webpage for 15.12, but there is no download link.
newbie
Activity: 7
Merit: 0
Whats the hashrate on a r9 380? Also is $110 usd or $140 cad good for one of these cards? I'm thinking about buying a bunch of them at this price.
i get 170 h/s on my 380x. 110 bucks for a 380 is god.

Is that stock and how many watts does that use? Also whats the difference between the x and none x?
its 1150/1500, if you OC the non x 380 you will get almost the same, but it also depends on the vendor. I have an ASUS, but according to some benchmarks, it makes lower scores than some non x 380s.
I can't tell an exact measurement for power consumption, but if you have high power costs you'd better avoid this card. It's perfect for gaming, mostly I use it for that and leave the mining on the 470s.

Power costs are only 6 cents per kwh so it's not high. I'll probably end up buying a few then.
member
Activity: 76
Merit: 10
Hi,

How do i set the clockspeed, memspeed and powerlimit?

I tried (see config below) but it doesn't work.

#-tt 75
-cclock 1000
-mclock 1000
-powlim -30
-i 3

In the rig are 4 AMD 390X.

regards,
Eric



maybe in the .bat file to put. not in .config
sr. member
Activity: 644
Merit: 274
Whats the hashrate on a r9 380? Also is $110 usd or $140 cad good for one of these cards? I'm thinking about buying a bunch of them at this price.
i get 170 h/s on my 380x. 110 bucks for a 380 is god.

Is that stock and how many watts does that use? Also whats the difference between the x and none x?
its 1150/1500, if you OC the non x 380 you will get almost the same, but it also depends on the vendor. I have an ASUS, but according to some benchmarks, it makes lower scores than some non x 380s.
I can't tell an exact measurement for power consumption, but if you have high power costs you'd better avoid this card. It's perfect for gaming, mostly I use it for that and leave the mining on the 470s.
member
Activity: 105
Merit: 10
Thanks.. 5 x RX480's working with v9.2 without issues.

ZEC: GPU0 252.655 H/s, GPU1 250.847 H/s, GPU2 254.769 H/s, GPU3 253.092 H/s, GPU4 253.355

Same here with x6 RX480's 8Gb , average about 253 H/s
How  can you reach so high speed?
I have 6* rx480, but speed is max 245sol
Can you tell your command line and driver version?
Thanks.
newbie
Activity: 7
Merit: 0
Whats the hashrate on a r9 380? Also is $110 usd or $140 cad good for one of these cards? I'm thinking about buying a bunch of them at this price.
i get 170 h/s on my 380x. 110 bucks for a 380 is god.

Is that stock and how many watts does that use? Also whats the difference between the x and none x?
newbie
Activity: 23
Merit: 0
Did someone know which rom is the best for non-ref rx 480 sapphire 8gb?
legendary
Activity: 1498
Merit: 1030
Im getting 277 h/s with my RX 470 8gb.

One of my 290s is doing 290 h/s but the other does 220 h/s. Will need to investigate that.

Thanks claymore.

WOW!  290 Sols/s on a 290?  Is this a ref model?  What clocks are you using?  I can't get more than 260 out of mine.

 R9 290 reference and near-reference cards (and by report R9 290x but I don't have any x) work much better for mining running a BIOS from TheStilt - even the ones that don't undervolt much if at all will still drop your temps a TON and let you overclock a lot more without hitting thermal limiting, while tightening the memory timings (like a strap mod for the RX series) to make them mine more efficiently even at the same clocks.

sr. member
Activity: 644
Merit: 274
Whats the hashrate on a r9 380? Also is $110 usd or $140 cad good for one of these cards? I'm thinking about buying a bunch of them at this price.
i get 170 h/s on my 380x. 110 bucks for a 380 is god.
newbie
Activity: 7
Merit: 0
Whats the hashrate on a r9 380? Also is $110 usd or $140 cad good for one of these cards? I'm thinking about buying a bunch of them at this price.
legendary
Activity: 1498
Merit: 1030
GPU - 9.1 -> 9.2
R7 370 - 155 -> 156
R9 280 - 195 -> 193
r9 290 - 295 -> 313

What's your settings for 290?

1050/1250, -i 8, modded 390X ROM, modded timings

1175mV core (just 69% ASIC) and 16.12.1 driver

 Try the 16.10.1 or 16.9.2 drivers, 16.12.1 COST me 5-10% hashrate on every card I tried it on when I was testing it.
jr. member
Activity: 59
Merit: 10
thanks Claymore! 300 sol r9 390!
Jump to: