v9.2 Linux version is available.
Great work Claymore you are the best!
Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 297. (Read 3839163 times)
Great work Claymore you are the best!
v9.2 Linux version is available.
Thanks Claymore, linux version gets a little less sol/s for me, I gotta make some tweaks.
v9.2 Linux version is available.
Thanks. I will check it out and report back!
What error is this?
DevFee: failed to mine for a long time, something is wrong, stop mining and reconnect.
15:15:18:540 a40 Reconnect in 30 sec...
This is happening all the time and for mining
DevFee: failed to mine for a long time, something is wrong, stop mining and reconnect.
15:15:18:540 a40 Reconnect in 30 sec...
This is happening all the time and for mining
You might mine in a pool does not support the dev mining.
I'm in
www2.coinmine.pl
Anyone else seeing lots of these? They were logging to syslog and also spitting out to the screen. I shut off rsyslog but they stilll litter the screen. It doesnt seem to cause any issues with performance.
Dec 22 11:33:41 rig19 kernel: [ 7805.310495] amdgpu 0000:02:00.0: GPU fault detected: 146 0x07628814
Dec 22 11:33:41 rig19 kernel: [ 7805.311018] amdgpu 0000:02:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x00162AEC
Dec 22 11:33:41 rig19 kernel: [ 7805.311543] amdgpu 0000:02:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x030C8014
Dec 22 11:33:41 rig19 kernel: [ 7805.312069] VM fault (0x14, vmid 1) at page 1452780, write from 'TC2' (0x54433200) (200)
Dec 22 11:33:41 rig19 kernel: [ 7805.310495] amdgpu 0000:02:00.0: GPU fault detected: 146 0x07628814
Dec 22 11:33:41 rig19 kernel: [ 7805.311018] amdgpu 0000:02:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x00162AEC
Dec 22 11:33:41 rig19 kernel: [ 7805.311543] amdgpu 0000:02:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x030C8014
Dec 22 11:33:41 rig19 kernel: [ 7805.312069] VM fault (0x14, vmid 1) at page 1452780, write from 'TC2' (0x54433200) (200)
What error is this?
DevFee: failed to mine for a long time, something is wrong, stop mining and reconnect.
15:15:18:540 a40 Reconnect in 30 sec...
This is happening all the time and for mining
DevFee: failed to mine for a long time, something is wrong, stop mining and reconnect.
15:15:18:540 a40 Reconnect in 30 sec...
This is happening all the time and for mining
You might mine in a pool does not support the dev mining.
What error is this?
DevFee: failed to mine for a long time, something is wrong, stop mining and reconnect.
15:15:18:540 a40 Reconnect in 30 sec...
This is happening all the time and for mining
DevFee: failed to mine for a long time, something is wrong, stop mining and reconnect.
15:15:18:540 a40 Reconnect in 30 sec...
This is happening all the time and for mining
I see ZEC is slowly rising in price again on Poloniex, wonder how long that lasts after the recent speed increases from Claymore and the other miners?
Hopefully it will continue to rise back up to about $50 a coin and stay there to make it worth me still mining it.
Currently getting a combined 420 sol/s from a R9 280 (non X) and 470.
Hopefully it will continue to rise back up to about $50 a coin and stay there to make it worth me still mining it.
Currently getting a combined 420 sol/s from a R9 280 (non X) and 470.
weird: Re: R9 380 ASUS 4G stryx
Reboot and running the command line line version naked with no ATI commands, results in about 152 sols and about 1 to 1.1 sols/w at the wall
reboot and run the latest genoil ETH miner, kill genoil and then run CM v9.2 for linux, results in some sort of "econo" mode performance: 128 sols and about 1.4 sols/w at the wall. In x/1500, using --odsc, x can go from 750 to 1075 with 0.5% change in the hash rate.
Reboot and running the command line line version naked with no ATI commands, results in about 152 sols and about 1 to 1.1 sols/w at the wall
reboot and run the latest genoil ETH miner, kill genoil and then run CM v9.2 for linux, results in some sort of "econo" mode performance: 128 sols and about 1.4 sols/w at the wall. In x/1500, using --odsc, x can go from 750 to 1075 with 0.5% change in the hash rate.
On 380 cards you are far better off mining XMR or ETH measured in $$/GPU over time. Just my 5 cent. 2 x 390 cards perform as high as your 6 card rig mining ZEC.
Anyone got their 280x up at above 245H/s yet?
Mine's at 240h/s at 1200/1700 1.2vddc
Mine's at 240h/s at 1200/1700 1.2vddc
1200/1500
than crash
what i was missed out with my rig
saphire dual x r9 280x
Anyone got their 280x up at above 245H/s yet?
Mine's at 240h/s at 1200/1700 1.2vddc
Mine's at 240h/s at 1200/1700 1.2vddc
1200/1500
than crash
what i was missed out with my rig
Anyone got their 280x up at above 245H/s yet?
Mine's at 240h/s at 1200/1700 1.2vddc
Mine's at 240h/s at 1200/1700 1.2vddc
You must have very cheap electricity price.
Anyone got their 280x up at above 245H/s yet?
Mine's at 240h/s at 1200/1700 1.2vddc
Mine's at 240h/s at 1200/1700 1.2vddc
1200/1500
than crash
what i was missed out with my rig
Anyone got their 280x up at above 245H/s yet?
Mine's at 240h/s at 1200/1700 1.2vddc
Mine's at 240h/s at 1200/1700 1.2vddc
You must have very cheap electricity price.
What is the best pool to use?
Here is what I'm getting:
6 x ASUS R9 380 4G Stryx. 770 sol. 560 watts total at the wall for the whole system.
About 1.4 sol/watt
Using x/1500 where x goes from 750 to 1075. Maybe a 0.5% change in the hash rate over this range.
6 x ASUS R9 380 4G Stryx. 770 sol. 560 watts total at the wall for the whole system.
About 1.4 sol/watt
Using x/1500 where x goes from 750 to 1075. Maybe a 0.5% change in the hash rate over this range.
Is that similar to Windows?
weird: Re: R9 380 ASUS 4G stryx
Reboot and running the command line line version naked with no ATI commands, results in about 152 sols and about 1 to 1.1 sols/w at the wall
reboot and run the latest genoil ETH miner, kill genoil and then run CM v9.2 for linux, results in some sort of "econo" mode performance: 128 sols and about 1.4 sols/w at the wall. In x/1500, using --odsc, x can go from 750 to 1075 with 0.5% change in the hash rate.
Reboot and running the command line line version naked with no ATI commands, results in about 152 sols and about 1 to 1.1 sols/w at the wall
reboot and run the latest genoil ETH miner, kill genoil and then run CM v9.2 for linux, results in some sort of "econo" mode performance: 128 sols and about 1.4 sols/w at the wall. In x/1500, using --odsc, x can go from 750 to 1075 with 0.5% change in the hash rate.
Hi. I have this error:
Quote
17:43:42:026 5a148780 AMD Cards available: 5
17:43:42:026 5a148780 GPU #0: Tahiti, 2986 MB available, 32 compute units
17:43:42:026 5a148780 GPU #0 recognized as Radeon 280X/380X
17:43:42:026 5a148780 GPU #1: Tahiti, 3007 MB available, 28 compute units
17:43:42:026 5a148780 GPU #2: Pitcairn, 1985 MB available, 20 compute units
17:43:42:026 5a148780 GPU #2 recognized as Radeon 270/270X
17:43:42:026 5a148780 GPU #3: Tahiti, 3007 MB available, 32 compute units
17:43:42:026 5a148780 GPU #3 recognized as Radeon 280X/380X
17:43:42:026 5a148780 GPU #4: Tahiti, 3007 MB available, 32 compute units
17:43:42:026 5a148780 GPU #4 recognized as Radeon 280X/380X
17:43:42:026 5a148780 POOL version
17:43:42:026 5a148780 b321
17:43:42:026 5a148780 Platform: Linux
17:43:42:042 5a148780 start building OpenCL program for GPU 0...
17:43:42:044 5a148780 done
17:43:42:144 5a148780 Frontend phase failed compilation.
Error: Compilation from LLVMIR binary to IL text failed!
17:43:42:144 5a148780 16x binary failed, try 15x
17:43:42:026 5a148780 GPU #0: Tahiti, 2986 MB available, 32 compute units
17:43:42:026 5a148780 GPU #0 recognized as Radeon 280X/380X
17:43:42:026 5a148780 GPU #1: Tahiti, 3007 MB available, 28 compute units
17:43:42:026 5a148780 GPU #2: Pitcairn, 1985 MB available, 20 compute units
17:43:42:026 5a148780 GPU #2 recognized as Radeon 270/270X
17:43:42:026 5a148780 GPU #3: Tahiti, 3007 MB available, 32 compute units
17:43:42:026 5a148780 GPU #3 recognized as Radeon 280X/380X
17:43:42:026 5a148780 GPU #4: Tahiti, 3007 MB available, 32 compute units
17:43:42:026 5a148780 GPU #4 recognized as Radeon 280X/380X
17:43:42:026 5a148780 POOL version
17:43:42:026 5a148780 b321
17:43:42:026 5a148780 Platform: Linux
17:43:42:042 5a148780 start building OpenCL program for GPU 0...
17:43:42:044 5a148780 done
17:43:42:144 5a148780 Frontend phase failed compilation.
Error: Compilation from LLVMIR binary to IL text failed!
17:43:42:144 5a148780 16x binary failed, try 15x
Today is holiday on Linux users street. Next will probably be release with support for Nvidia cards.
Anyone got their 280x up at above 245H/s yet?
Mine's at 240h/s at 1200/1700 1.2vddc
Mine's at 240h/s at 1200/1700 1.2vddc
Jump to: