Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 446.

ivomm

legendary

Activity: 1881

Merit: 3057

All good things to those who wait

Quote from: Altcoining on November 30, 2016, 04:06:55 AM

Quote from: Marvell1 on November 30, 2016, 03:53:46 AM

Anyone else dissapoint with the Nanopool ? Its paying consistently under what it should be for the h/s it displays by a good 15% and on top of that its not even showing the right h/s , its under by around 1000 h/s for my 15000 h/s

anyone seeing this as well ?

Nano pool has always been like that.

I second that. I compared Nanopool for ETH, ETC and ZEC with the following pools: dwarfpool for ETH, ethc.epool.io for ETC, flypool and coinmine for ZEC. I must say that nanopool was giving 5-10% less earnings compared to the other pools. I also noticed that dwarfpool was giving exactly the same profit as the calculator www.whattomine.com was showing both for ETH and XMR (with Claymore Cryptonight miner). I think that Nano is delibarately showing an incorrect hashrate. Only the profit tests can show the real picture.

snakey

legendary

Activity: 1386

Merit: 1001

For some reason after installing v8 my fans seems to be working much harder and louder...Everyone said that they got better speeds but the same watts but mine seems to be pushing the fans harder.

Any help would be appreciated.

Thanks.

yatta

member

Activity: 93

Merit: 10

Quote from: Hotmetal on November 29, 2016, 03:56:27 PM

Quote from: yatta on November 29, 2016, 02:52:06 PM

Only reasonable meter is wall.

At the moment i'm testing 470x and 480x.
480x doing 177sols with 110w.

What is your 470's doing with undervolting?

470 - 165
480 - 180 at the moment

2 cards in rig - 288W at wall.
System eats 83-85.
So cards eat about 105- 107w each.

Vixmore

sr. member

Activity: 322

Merit: 250

Quote from: Marvell1 on November 30, 2016, 03:53:46 AM

Anyone else dissapoint with the Nanopool ? Its paying consistently under what it should be for the h/s it displays by a good 15% and on top of that its not even showing the right h/s , its under by around 1000 h/s for my 15000 h/s

anyone seeing this as well ?

I noticed that in Nanopool as well. I moved to flypool, but the displayed hash is consistently around 6% below reported locally. I moved to Dwarfpool, the displayed hash rate is 5% above reported rate, but the shares are 6-10% below right rate.

newklear

newbie

Activity: 8

Merit: 0

Quote from: Marvell1 on November 30, 2016, 04:16:19 AM

Quote from: newklear on November 30, 2016, 04:15:19 AM

Hello guys. I just started configuring my first rig. I have 4 RX 470 gpus . It works just fine until i get this error :

WATCHDOG: GPU 2 hangs in OpenCL call, exit .

After that it tries to restart the system but actualy freeze it. I have 1200 PSU so power shouldn`t be a problem

Any idea what it can cause this ? I have enough virtual memory set. The Gpus are not modded or anything . Just stock

There seems to be a problem with atikmdag.sys Fail . I have 16 gb of Virtual Memory

Rinstall your drivers, first uninstall with DDU

I think i did that like 3 times already with new windows also . Same error . For a Rx 470 Nitro + OC what drivers you think should be best ? Thanks !

Marvell1

legendary

Activity: 2408

Merit: 1102

Leading Crypto Sports Betting & Casino Platform

Quote from: newklear on November 30, 2016, 04:15:19 AM

Hello guys. I just started configuring my first rig. I have 4 RX 470 gpus . It works just fine until i get this error :

WATCHDOG: GPU 2 hangs in OpenCL call, exit .

After that it tries to restart the system but actualy freeze it. I have 1200 PSU so power shouldn`t be a problem

Any idea what it can cause this ? I have enough virtual memory set. The Gpus are not modded or anything . Just stock

There seems to be a problem with atikmdag.sys Fail . I have 16 gb of Virtual Memory

Rinstall your drivers, first uninstall with DDU

newklear

newbie

Activity: 8

Merit: 0

Hello guys. I just started configuring my first rig. I have 4 RX 470 gpus . It works just fine until i get this error :

WATCHDOG: GPU 2 hangs in OpenCL call, exit .

After that it tries to restart the system but actualy freeze it. I have 1200 PSU so power shouldn`t be a problem

Any idea what it can cause this ? I have enough virtual memory set. The Gpus are not modded or anything . Just stock

There seems to be a problem with atikmdag.sys Fail . I have 16 gb of Virtual Memory

golden0707

full member

Activity: 189

Merit: 100

Quote from: Marvell1 on November 30, 2016, 02:35:22 AM

Quote from: golden0707 on November 30, 2016, 02:13:30 AM

Yesterday tested undervolting on my Giga RX 470 Gaming G1 4Gb.

On stock (1230/1650):
Idle - 90 W/wall , Mining - 216-230 W/wall ( 75avg W in GPU-Z).

Undervolted -90mW in AB stock clocks :
Indle - 90W/wall ( didnt measured , I gues it was same), Mining - 190-200 W/wall ( 52avg W in GPU-Z)

So its about 30 W less power usage . Anyone got same results ?

Hashrate was the same.

this is the whole system wattage right? no way a 470 uses 200watt
they are capped at around 150

Yes, 200watt at the wall was whole system consumption.
I suppose before underclock was about 140W card only consump. after - 110W ( mining mode of kz)

Arek

newbie

Activity: 44

Merit: 0

Quote from: Marvell1 on November 30, 2016, 03:54:24 AM

Quote from: Demarsac on November 30, 2016, 03:53:30 AM

Quote from: Marvell1 on November 30, 2016, 03:51:45 AM

Quote from: Amph on November 30, 2016, 02:55:16 AM

Quote from: Arek on November 30, 2016, 02:48:14 AM

Quote from: Marvell1 on November 30, 2016, 02:35:22 AM

Quote from: golden0707 on November 30, 2016, 02:13:30 AM

Yesterday tested undervolting on my Giga RX 470 Gaming G1 4Gb.

On stock (1230/1650):
Idle - 90 W/wall , Mining - 216-230 W/wall ( 75avg W in GPU-Z).

Undervolted -90mW in AB stock clocks :
Indle - 90W/wall ( didnt measured , I gues it was same), Mining - 190-200 W/wall ( 52avg W in GPU-Z)

So its about 30 W less power usage . Anyone got same results ?

Hashrate was the same.

this is the whole system wattage right? no way a 470 uses 200watt
they are capped at around 150

Claymore only works for
It's not 200W. RX 470 is doing around 5-10W in idle so if you take 230W and subtract 80W (mobo + psu + other stuff) it leaves you at 150W for GPU at the wall, so GPU is actually using around 130W if we assume that PSU has 85% efficiency.

well not that efficient, while the 1070 is more expensive it can do 220 sol at 95w, ratio is an impressive 2:1 between hashrate and consumption

I have silentarmy builds and my 1070s only do 120 or so sols where are you getting these numbers

Why not use Claymore v8? It's like 100% faster than any SA build

Claymore only works for AMD cards

If you undervolt RX470 you'll get 170-180 sols at 120W but the price is half of gtx1070

Altcoining

full member

Activity: 138

Merit: 100

Quote from: Marvell1 on November 30, 2016, 03:53:46 AM

Anyone else dissapoint with the Nanopool ? Its paying consistently under what it should be for the h/s it displays by a good 15% and on top of that its not even showing the right h/s , its under by around 1000 h/s for my 15000 h/s

anyone seeing this as well ?

Nano pool has always been like that.

Marvell1

legendary

Activity: 2408

Merit: 1102

Leading Crypto Sports Betting & Casino Platform

Quote from: Demarsac on November 30, 2016, 03:53:30 AM

Quote from: Marvell1 on November 30, 2016, 03:51:45 AM

Quote from: Amph on November 30, 2016, 02:55:16 AM

Quote from: Arek on November 30, 2016, 02:48:14 AM

Quote from: Marvell1 on November 30, 2016, 02:35:22 AM

Quote from: golden0707 on November 30, 2016, 02:13:30 AM

Yesterday tested undervolting on my Giga RX 470 Gaming G1 4Gb.

On stock (1230/1650):
Idle - 90 W/wall , Mining - 216-230 W/wall ( 75avg W in GPU-Z).

Undervolted -90mW in AB stock clocks :
Indle - 90W/wall ( didnt measured , I gues it was same), Mining - 190-200 W/wall ( 52avg W in GPU-Z)

So its about 30 W less power usage . Anyone got same results ?

Hashrate was the same.

this is the whole system wattage right? no way a 470 uses 200watt
they are capped at around 150

Claymore only works for
It's not 200W. RX 470 is doing around 5-10W in idle so if you take 230W and subtract 80W (mobo + psu + other stuff) it leaves you at 150W for GPU at the wall, so GPU is actually using around 130W if we assume that PSU has 85% efficiency.

well not that efficient, while the 1070 is more expensive it can do 220 sol at 95w, ratio is an impressive 2:1 between hashrate and consumption

I have silentarmy builds and my 1070s only do 120 or so sols where are you getting these numbers

Why not use Claymore v8? It's like 100% faster than any SA build

Claymore only works for AMD cards

Marvell1

legendary

Activity: 2408

Merit: 1102

Leading Crypto Sports Betting & Casino Platform

Anyone else dissapoint with the Nanopool ? Its paying consistently under what it should be for the h/s it displays by a good 15% and on top of that its not even showing the right h/s , its under by around 1000 h/s for my 15000 h/s

anyone seeing this as well ?

Demarsac

sr. member

Activity: 504

Merit: 272

Quote from: Marvell1 on November 30, 2016, 03:51:45 AM

Quote from: Amph on November 30, 2016, 02:55:16 AM

Quote from: Arek on November 30, 2016, 02:48:14 AM

Quote from: Marvell1 on November 30, 2016, 02:35:22 AM

Quote from: golden0707 on November 30, 2016, 02:13:30 AM

Yesterday tested undervolting on my Giga RX 470 Gaming G1 4Gb.

On stock (1230/1650):
Idle - 90 W/wall , Mining - 216-230 W/wall ( 75avg W in GPU-Z).

Undervolted -90mW in AB stock clocks :
Indle - 90W/wall ( didnt measured , I gues it was same), Mining - 190-200 W/wall ( 52avg W in GPU-Z)

So its about 30 W less power usage . Anyone got same results ?

Hashrate was the same.

this is the whole system wattage right? no way a 470 uses 200watt
they are capped at around 150

It's not 200W. RX 470 is doing around 5-10W in idle so if you take 230W and subtract 80W (mobo + psu + other stuff) it leaves you at 150W for GPU at the wall, so GPU is actually using around 130W if we assume that PSU has 85% efficiency.

well not that efficient, while the 1070 is more expensive it can do 220 sol at 95w, ratio is an impressive 2:1 between hashrate and consumption

I have silentarmy builds and my 1070s only do 120 or so sols where are you getting these numbers

Why not use Claymore v8? It's like 100% faster than any SA build

Marvell1

legendary

Activity: 2408

Merit: 1102

Leading Crypto Sports Betting & Casino Platform

Quote from: Amph on November 30, 2016, 02:55:16 AM

Quote from: Arek on November 30, 2016, 02:48:14 AM

Quote from: Marvell1 on November 30, 2016, 02:35:22 AM

Quote from: golden0707 on November 30, 2016, 02:13:30 AM

Yesterday tested undervolting on my Giga RX 470 Gaming G1 4Gb.

On stock (1230/1650):
Idle - 90 W/wall , Mining - 216-230 W/wall ( 75avg W in GPU-Z).

Undervolted -90mW in AB stock clocks :
Indle - 90W/wall ( didnt measured , I gues it was same), Mining - 190-200 W/wall ( 52avg W in GPU-Z)

So its about 30 W less power usage . Anyone got same results ?

Hashrate was the same.

this is the whole system wattage right? no way a 470 uses 200watt
they are capped at around 150

It's not 200W. RX 470 is doing around 5-10W in idle so if you take 230W and subtract 80W (mobo + psu + other stuff) it leaves you at 150W for GPU at the wall, so GPU is actually using around 130W if we assume that PSU has 85% efficiency.

well not that efficient, while the 1070 is more expensive it can do 220 sol at 95w, ratio is an impressive 2:1 between hashrate and consumption

I have silentarmy builds and my 1070s only do 120 or so sols where are you getting these numbers

mamedesign

newbie

Activity: 78

Merit: 0

F5 & F5 ,stiil wait V9.0 come out....

Kimax

newbie

Activity: 33

Merit: 0

Quote from: Squall10 on November 29, 2016, 08:08:28 PM

Quote from: Kimax on November 29, 2016, 06:42:52 PM

Hi guys. Its me with the weird R9 280X doing 205 Sol/s

I know that my wattage seems weird and they are.

I changed my wattage to 150W (my highest measurement) on the comparison page:
https://en.wikibooks.org/wiki/ZCash_mining_GPU_Comparison

I tryed to check my wattage even further and i used 2 different methods this time.

1. method is a high-grade wattage-meter sitting between my PC and the power plug.
The meter is a Telco Sensors ST2300A aprooved by one of the biggest power-companys in Denmark (SEAS-NVE).

2. Method was calculating the wattage from the data showing in GPU-Z (Voltage multiplyed by Amps)

And here is my results:

WALL:
Idle: 155 - 160 W
Mining: 290 - 310 W
135 - 150 W
(I'm only using my R9 280X)

GPU-Z:
VDDC: 1.133 - 1.146 V
VDDC Current: 83 - 104 A
94 - 119 W

Hi, what is the model of your R9 280x ?

Its a Clud 3D R9 280X 3GB RoyalQueen

Kimax

newbie

Activity: 33

Merit: 0

Quote from: antantti on November 29, 2016, 07:02:45 PM

Quote from: Kimax on November 29, 2016, 06:42:52 PM

Hi guys. Its me with the weird R9 280X doing 205 Sol/s

WALL:
Idle: 155 - 160 W
Mining: 290 - 310 W
135 - 150 W
(I'm only using my R9 280X)

They do use some power when idling too, you need to add that to calculations.

If you have one powered riser and a spare psu it is very easy to check. Wall - meter - psu - (riser + pcie power connectors), so only one psu that feeds only that one gpu connected to meter.

That leaves only speculations for psu efficiency.

I dont have any risers. I only use my main computer.

But yea. What would be a precise way to measure it.

Amph

legendary

Activity: 3248

Merit: 1070

Quote from: Arek on November 30, 2016, 02:48:14 AM

Quote from: Marvell1 on November 30, 2016, 02:35:22 AM

Quote from: golden0707 on November 30, 2016, 02:13:30 AM

Yesterday tested undervolting on my Giga RX 470 Gaming G1 4Gb.

On stock (1230/1650):
Idle - 90 W/wall , Mining - 216-230 W/wall ( 75avg W in GPU-Z).

Undervolted -90mW in AB stock clocks :
Indle - 90W/wall ( didnt measured , I gues it was same), Mining - 190-200 W/wall ( 52avg W in GPU-Z)

So its about 30 W less power usage . Anyone got same results ?

Hashrate was the same.

this is the whole system wattage right? no way a 470 uses 200watt
they are capped at around 150

It's not 200W. RX 470 is doing around 5-10W in idle so if you take 230W and subtract 80W (mobo + psu + other stuff) it leaves you at 150W for GPU at the wall, so GPU is actually using around 130W if we assume that PSU has 85% efficiency.

well not that efficient, while the 1070 is more expensive it can do 220 sol at 95w, ratio is an impressive 2:1 between hashrate and consumption

Arek

newbie

Activity: 44

Merit: 0

Quote from: Marvell1 on November 30, 2016, 02:35:22 AM

Quote from: golden0707 on November 30, 2016, 02:13:30 AM

Yesterday tested undervolting on my Giga RX 470 Gaming G1 4Gb.

On stock (1230/1650):
Idle - 90 W/wall , Mining - 216-230 W/wall ( 75avg W in GPU-Z).

Undervolted -90mW in AB stock clocks :
Indle - 90W/wall ( didnt measured , I gues it was same), Mining - 190-200 W/wall ( 52avg W in GPU-Z)

So its about 30 W less power usage . Anyone got same results ?

Hashrate was the same.

this is the whole system wattage right? no way a 470 uses 200watt
they are capped at around 150

It's not 200W. RX 470 is doing around 5-10W in idle so if you take 230W and subtract 80W (mobo + psu + other stuff) it leaves you at 150W for GPU at the wall, so GPU is actually using around 130W if we assume that PSU has 85% efficiency.

Marvell1

legendary

Activity: 2408

Merit: 1102

Leading Crypto Sports Betting & Casino Platform

Quote from: golden0707 on November 30, 2016, 02:13:30 AM

Yesterday tested undervolting on my Giga RX 470 Gaming G1 4Gb.

On stock (1230/1650):
Idle - 90 W/wall , Mining - 216-230 W/wall ( 75avg W in GPU-Z).

Undervolted -90mW in AB stock clocks :
Indle - 90W/wall ( didnt measured , I gues it was same), Mining - 190-200 W/wall ( 52avg W in GPU-Z)

So its about 30 W less power usage . Anyone got same results ?

Hashrate was the same.

this is the whole system wattage right? no way a 470 uses 200watt
they are capped at around 150

Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 446. (Read 3839163 times)